All-optical prefix tree adder with the help of terahertz optical asymmetric demultiplexer

We propose and describe an all-optical prefix tree adder with the help of a terahertz optical asymmetric demultiplexer (TOAD) using a set of optical switches. The prefix tree adder is useful in compound adder implementation. It is preferred over the ripple carry adder and the carry lookahead adder. We also describe the principle and possibilities of the all-optical prefix tree adder. The theoretical model is presented and verified through numerical simulation. The new method promises higher processing speed and accuracy. The model can be extended for studying more complex all-optical circuits of enhanced functionality in which the prefix tree adder is the basic building block.     

All-optical carry lookahead adder with the help of terahertz optical asymmetric demultiplexer

An all-optical model of carry lookahead adder (CLA) implemented with a semiconductor optical amplifier (SOA)-assisted Sagnac interferometer (TOAD) is presented. The model accounts for the SOA small signal gain, linewidth enhancement factor, the switching pulses energy and width and the Sagnac loop asymmetry. Adder is a very basic component in a central processing unit. The CLA is the highest speed adder nowadays. Theoritical model is presented and verified through numerical simulation. The method promises both higher processing speed and accuracy. The model can be enhanced the functionality in which carry lookahead adder is the basic building block.     

All-optical reconfigurable logic operations with the help of terahertz optical asymmetric demultiplexer

An all-optical reconfigurable logic operation essentially constitutes a key technology for avoiding complex and speed limited optoelectronics conversions and performing various processing tasks. All-optical reconfigurable logic operations with the help of terahertz optical asymmetric demultiplexer (TOAD) is proposed and described. The paper describes the all-optical reconfigurable logic operations using a set of all-optical multiplexer and optical switches. We have tried to exploit the advantages of TOAD-based switch to design an integrated all-optical circuit which can perform the different logic operations AND, XOR, NOR and NOT. Numerical simulation confirming described methods is given in this paper.     

All-optical burst-mode clock extraction based on the thresholding operation of a modified terahertz optical asymmetric demultiplexer

To implement all-optical burst-mode clock extraction we adopt a modified terahertz optical asymmetric demultiplexer (MTOAD). The transmittance and reflectance of the MTOAD depend on the input intensity. For the MTOAD, two levels of pulse intensity can be chosen in such a way that while the pulses with similar intensity are reflected for both strong and weak pulses, only the strong pulse transmits. The device is useful, for example, for bit-level clock extraction from a packet, where strong and weak intensity pulses are assigned to ‘1' and ‘0', respectively. When the input optical signal power is fixed to −1.6 dBm and the intensity ratio between ‘1' and ‘0' is varied in the range of 0.2–0.5, the extinction ratio (ER) at the transmitted port is more than 10 dB and a clock amplitude jitter (CAJ) of the bit-level clock at the reflected port is less than 14%. Inversely, when the input power is varied in the range of −6–−1 dBm with fixed intensity ratio of 0.3, more than 11 dB of ER and less than 15% of CAJ are obtained.     

Clock recovery from 40 Gbps optical signal with optical phase-locked loop based on a terahertz optical asymmetric demultiplexer

10 GHz clock recovery from 40 Gbps optical time-division-multiplexed (OTDM) signal pulses is experimentally demonstrated using optical phase lock loop based on a terahertz optical asymmetric demultiplexer (TOAD) with a local-reference-oscillator-free electronic feedback circuit. The clock pulse that was used as the control pulse had energy of 800 fJ and the SNR of the time-extracted 10 GHz RF signal to the side components was larger than 40 dB.     

A novel 40-Gb/s all-optical inverted wavelength converter based on a modified terahertz optical asymmetric demultiplexer

A novel scheme for all-optical inverted wavelength conversion with 40-Gb/s pseudorandom bit sequences (PRBSs) based on a modified terahertz optical asymmetric demultiplexer (TOAD) is proposed. The performance of the proposed wavelength converter is analyzed in term of extinction ratio (ER) through numerical simulations. For a typical ER of 10 dB, some key characteristic parameters of the semiconductor optical amplifier (SOA) are designed. With the properly designed parameters, a high quality eye diagram is achievable, indicating that the amplitude fluctuation of the output signal is effectively reduced.     

A novel 40-Gb/s all-optical inverted wavelength converter based on a modified terahertz optical asymmetric demultiplexer

A novel scheme for all-optical inverted wavelength conversion with 40-Gb/s pseudorandom bit sequences (PRBSs) based on a modified terahertz optical asymmetric demultiplexer (TOAD) is proposed. The performance of the proposed wavelength converter is analyzed in term of extinction ratio (ER) through numerical simulations. For a typical ER of 10 dB, some key characteristic parameters of the semiconductor optical amplifier (SOA) are designed. With the properly designed parameters, a high quality eye diagram is achievable, indicating that the amplitude fluctuation of the output signal is effectively reduced.     

基于太赫兹光非对称解复用器结构的低开关能量、高线性度全光采样门实验研究

利用多量子阱结构的非线性半导体光放大器(SOA)构建的太赫兹光非对称解复用器(TOAD), 实验实现了一个开关能量低至25 fJ, 线性度高达0.99的全光采样门. 详细分析了采样脉冲功率和非对称偏移量分别对采样窗口形状、宽度和幅度的影响, 并研究了不同采样窗口宽度下TOAD的开关能量及线性度的变化规律.     

Frequency encoded optical four-bit adder/subtractor with control input using semiconductor optical amplifiers

Optical adder/subtractor for two four-bit frequency encoded binary numbers are proposed and designed based on four wave mixing, add drop multiplexing and frequency conversion in semiconductor optical amplifier. The input bits and the control input are intensity-modulated signal of two specific frequencies suitable for optical communication in the C band of wavelength. The device can distinguish negative and positive results and controlled operation are most promising in this proposal. The use of semiconductor optical amplifiers along with frequency encoding makes the system very fast and useful for future optical communication and computation systems.     

Method of implementation of frequency encoded all optical half adder, half subtractor and full adder based on semiconductor optical amplifiers and add drop multiplexers

A novel frequency encoded all optical half adder, half subtractor and full adder are proposed. The implementation is ultrafast one and the frequency encoding makes it intensity loss dependent problem free. The use of polarization insensitive four-wave mixing makes the design polarization independent and the hardware simple. The frequency conversion by the reflective semiconductor optical amplifiers (RSOA) makes the design faster compared to other semiconductor optical amplifiers (SOA) based design.     

All-optical half adder based on photonic crystals for BPSK signals

Optical and Quantum Electronics - This paper aims at first deriving the general forms of the electromagnetic vector and scalar potentials inside a cylindrical wave-guide by placing a 3D-charged...     

Multiplexer/demultiplexer in optical communications based on a holographic Fresnel lens

A holographic Fresnel lens for coarse wavelength-division-multiplexing (WDM) application in 1300 nm band is described. Letter paper focuses on minimizing the third-order aberrations for off-axis operation of the lens in order to reduce channel spacing and insertion loss. Improved characteristics have been obtained for the lens fabricated according to the theoretical design.     

All-optical computation — A parallel integrator based upon a single gate full adder

The achievement of low power all-optical bistability in small semiconductor devices at the end of the 1970's led to an upsurge in interest in all-optical information processing and optical computing. Based on the proven characteristics of existing bistable systems designs are put forward in this paper for a parallel optical integrator, using a single bistable element for full-adder operation. Optical storage or beam delay computational loops, and time-series to space-parallel conversion designs are presented.     

All-optical frequency multiplication/recovery based on a semiconductor optical amplifier ring cavity

A novel scheme for all-optical frequency multiplication/recovery based on a semiconductor optical amplifier ring cavity is proposed and investigated numerically. The results show, for a 2.5 GHz driving pulse train, it can be generated 5-25 GHz repetition rate pulse trains with low clock amplitude jitter, polarization independence and high peak power. Furthermore, the extraction of the clock signal from a pseudorandom bit sequence signal can be realized based on the proposed scheme.     

Four-channel optical demultiplexer based on hexagonal photonic crystal ring resonators

In this paper, photonic crystal ring resonators with hexagonal lattice structure are used to design a four-channel optical demultiplexer. The structure size, the average transfer coefficient, the quality factor, and the channel spacing are equal to 424.5 µm², 95.8%, 1943, and 2 nm, respectively. The average crosstalk is also computed to be ?18.11 dB. In this study, the plane wave expansion (PWE) and finite-difference time-domain (FDTD) methods are used, respectively, to characterize the photonic bandgap and to investigate the optical behavior of the structure. The proposed design can be used in dense wavelength division multiplexing (DWDM) systems.     

All-optical circular shift register based on semiconductor optical amplifiers

We present a new and potentially integrable scheme to realize an all-optical circulating shift register consisting of a fiber-loop based optical buffer (OB) and an optical AND gate. The OB is implemented using semiconductor optical amplifier as a nonlinear element and the AND gate is realized by means of four wave mixing effect in a semiconductor optical amplifier. The operation of the shift register has been verified for a 10-bit input sequence at a sequence bit rate of 2.5 GHz and 10 GHz respectively. The simulation results show that \(\hbox {BER}=10^{-9}\) is achieved at optical signal-to-noise (OSNR) ratio of 16dB at the shift register output. The dependence of the output quality factor ( \(Q\) -factor) on SOA parameters is also investigated and discussed.     

All-optical flip-flop based on vertical cavity semiconductor optical amplifiers

We report the operation of an all-optical set-reset (SR) flip-flop based on vertical cavity semiconductor optical amplifiers (VCSOAs). This flip-flop is cascadable, has low optical switching power (~10 microW), and has the potential to be integrated on a small footprint (~100 microm(2)). The flip-flop is composed of two cross-coupled electrically pumped VCSOA inverters and uses the principles of cross-gain modulation, polarization gain anisotropy, and highly nonlinear gain characteristics to achieve flip-flop functionality. We believe that, when integrated on chip, this type of all-optical flip-flop opens new prospects for implementing all-optical fast memories and timing regeneration circuits.