n + n]-Heterometallomacrocyclic complexes (n > or = 2) prepared from platinum(II)-centred ditopic 2,2':6',2'-terpyridine ligands: dimensional cataloguing by pulsed-field gradient spin-echo NMR spectroscopy

The reaction of 4'-(2-propyn-1-oxy)-2,2':6',2'-terpyridine (HC[triple bond]CCH2Oterpy) with trans-[PtI2(PR3)2] (R = Et, (n)Bu, Ph) results in the regioselective formation of the metalloditopic ligands trans-[Pt(C[triple bond]CCH2Oterpy)2(PR3)2], crystallographic data for which are presented. Each ditopic ligand reacts with FeCl(2).4H(2)O to give heterometallomacrocycles, the smallest of which is a [2 + 2] macrocycle, confirmed structurally for R = Et. The NMR spectroscopic data confirm the formation of symmetrical species, i.e. macrocyclic and not polymeric species. The distribution of products has been investigated using pulsed-field gradient spin-echo (PGSE) diffusion NMR spectroscopy, and indicates that the kinetic products from the reactions of 1, 2 or 3(L) with iron(II) are [Fe(n)L(n)](2n+) with n = 2, 3 or 4. For L = 1 and 2, these mixtures of products convert in solution to the thermodynamically favoured [Fe(2)L(2)](4+).     

C-C coupling reactions in the coordination sphere of rhodium(I) and rhodium(III): New routes for the di- and trimerization of terminal alkynes

The alkynyl(vinylidene)rhodium(I) complexes trans-[Rh(C[triple bond, length as m-dash]CR)(=C=CHR)(PiPr3)2] 2, 5, 6 react with CO by migratory insertion to give stereoselectively the butenynyl compounds trans-[Rh{eta1-(Z)-C(=CHR)C[triple bond, length as m-dash]CR}(CO)(PiPr3)2](Z)-7-9, of which (Z)-7 (R=Ph) and (Z)-8 (R=tBu) rearrange upon heating or UV irradiation to the (E) isomers. Similarly, trans-[Rh{eta1-C(=CH2)C[triple bond, length as m-dash]CPh}(CO)(PiPr3)2] 12 and trans-[Rh{eta1-(Z)-C(=CHCO2Me)C[triple bond, length as m-dash]CR}(CO)(PiPr3)2](Z)-15, (Z)-16 have been prepared. At room temperature, the corresponding "non-substituted" derivative trans-[Rh{eta1-C(=CH2)C[triple bond, length as m-dash]CH}(CO)(PiPr3)2] 18 is in equilibrium with the butatrienyl isomer trans-[Rh(eta1-CH=]C=C=CH2)(CO)(PiPr3)2] 19 that rearranges photochemically to the alkynyl complex trans-[Rh(C[triple bond, length as m-dash]CCH=CH2)(CO)(PiPr3)2] 20. Reactions of (Z)-7, (E)-7, (Z)-8 and (E)-8 with carboxylic acids R'CO2H (R'=CH3, CF3) yield either the butenyne (Z)- and/or (E)-RC[triple bond, length as m-dash]CCH=CHR or a mixture of the butenyne and the isomeric butatriene, the ratio of which depends on both R and R'. Treatment of 2 (R=Ph) with HCl at -40 degrees C affords five-coordinate [RhCl(C[triple bond, length as m-dash]CPh){(Z)-CH=CHPh}(PiPr3)2] 23, which at room temperature reacts by C-C coupling to give trans-[RhCl{eta2-(Z)-PhC[triple bond, length as m-dash]CCH=CHPh}(PiPr3)2](Z)-21. The related compound trans-[RhCl(eta2-HC[triple bond, length as m-dash]CCH=CH2)(PiPr3)2] 27, prepared from trans-[Rh(C[triple bond, length as m-dash]CH)(=C=CH2)(PiPr3)2] 17 and HCl, rearranges to the vinylvinylidene isomer trans-[RhCl(=C=CHCH=CH2)(PiPr3)2] 28. While stepwise reaction of 2with CF3CO2H yields, via alkynyl(vinyl)rhodium(III) intermediates (Z)-29 and (E)-29, the alkyne complexes trans-[Rh(kappa1-O2CCF3)(eta2-PhC[triple bond, length as m-dash]CCH=CHPh)(PiPr3)2](Z)-30 and (E)-30, from 2 and CH3CO2H the acetato derivative [Rh(kappa2-O2CCH3)(PiPr3)2] 33 and (Z)-PhC[triple bond, length as m-dash]CCH=]CHPh are obtained. From 6 (R=CO2Me) and HCl or HC[triple bond, length as m-dash]CCO2Me the chelate complexes [RhX(C[triple bond, length as m-dash]CCO2Me){kappa2(C,O)-CH=CHC(OMe)=O}(PiPr3)2] 34 (X=Cl) and 35 (X=C[triple bond, length as m-dash]CCO2Me) have been prepared. In contrast to the reactions of [Rh(kappa2-O2CCH3)(C[triple bond, length as m-dash]CE)(CH=CHE)(PiPr3)2] 37(E=CO2Me) with chloride sources which give, via intramolecular C-C coupling, four-coordinate trans-[RhCl{eta2-(E)-EC[triple bond, length as m-dash]CCH=CHE}(PiPr3)2](E)-36, treatment of 37with HC[triple bond, length as m-dash]CE affords, via insertion of the alkyne into the rhodium-vinyl bond, six-coordinate [Rh(kappa2-O2CCH3)(C[triple bond, length as m-dash]CE){eta1-(E,E)-C(=CHE)CH=CHE}(PiPr3)2] 38. The latter reacts with MgCl2 to yield trans-[RhCl{eta2-(E,E)-EC[triple bond, length as m-dash]CC(=CHE)CH=CHE}(PiPr3)2] 39, which, in the presence of CO, generates the substituted hexadienyne (E,E)-EC[triple bond, length as m-dash]CC(=CHE)CH=CHE 40.     

Room-temperature phosphorescence and energy transfer in luminescent multinuclear platinum(II) complexes of branched alkynyls

A series of luminescent branched platinum(II) alkynyl complexes, [1,3,5-{RC[triple bond]C(PEt3)2PtC[triple bond]C-C6H4C[triple bond]C}3C6H3] (R=C6H5, C6H4OMe, C6H4Me, C6H4CF3, C5H4N, C6H4SAc, 1-napthyl (Np), 1-pyrenyl (Pyr), 1-anthryl-8-ethynyl (HC[triple bond]CAn)), [1,3-{PyrC[triple chemical bond]C(PEt3)2PtC[triple bond]CC6H4C[triple bond]C}2-5-{(iPr)3SiC[triple bond]C}C6H3], and [1,3-{PyrC[triple bond]C(PEt3)2PtC[triple bond]CC6H4C[triple bond]C}2-5-(HC[triple bond]C)C6H3], was successfully synthesized by using the precursors [1,3,5-{Cl(PEt3)2PtC[triple bond]CC6H4C[triple bond]C}3C6H3] or [1,3-{Cl(PEt3)2PtC[triple bond]CC6H4C[triple bond]C}2-5-{(iPr)3SiC[triple bond]C}C6H3]. The X-ray crystal structures of [1,3,5-{MeOC6H4C[triple bond]C(PEt3)2PtC[triple bond]CC6H4C[triple bond]C}3C6H3] and [1,8-{Cl(PEt3)2PtC[triple bond]C}2An] have been determined. These complexes were found to show long-lived emission in both solution and solid-state phases at room temperature. The emission origin of the branched complexes [1,3,5-{RC[triple bond]C(PEt3)2PtC[triple bond]CC6H4C[triple bond]C}3C6H3] with R=C6H5, C6H4OMe, C6H4Me, C6H4CF3, C5H4N, and C6H4SAc was tentatively assigned to be derived from triplet states of predominantly intraligand (IL) character with some mixing of metal-to-ligand charge-transfer (MLCT) (dpi(Pt)-->pi*(C[triple bond]CR)) character, while the emission origin of the branched complexes with polyaromatic alkynyl ligands, [1,3,5-{RC[triple bond]C(PEt3)2PtC[triple bond]CC6H4C[triple bond]C}3C6H3] with R=Np, Pyr, or HC[triple bond]CAn, [1,3-{PyrC[triple bond]C(PEt3)2PtC[triple bond]CC6H4C[triple bond]C}2-5-{(iPr)3SiC[triple bond]C}C6H3], [1,3-{PyrC[triple bond]C(PEt3)2PtC[triple bond]CC6H4C[triple bond]C}2-5-(HC[triple bond]C)C6H3], and [1,8-{Cl(PEt3)2PtC[triple bond]C}2An], was tentatively assigned to be derived from the predominantly 3IL states of the respective polyaromatic alkynyl ligands, mixed with some 3MLCT (d(pi)(Pt)-->pi*(C[triple bond]CR)) character. By incorporating different alkynyl ligands into the periphery of these branched complexes, one could readily tune the nature of the lowest energy emissive state and the direction of the excitation energy transfer.     

Spectroscopic studies and structures of trans-ruthenium(II) and ruthenium(III) bis(cyanide) complexes supported by a tetradentate macrocyclic tertiary amine ligand

trans-[Ru(16-TMC)(C[triple bond]N)2] (1; 16-TMC = 1,5,9,13-tetramethyl-1,5,9,13-tetraazacyclohexadecane) was prepared by the reaction of trans-[Ru(16-TMC)Cl2]Cl with KCN in the presence of zinc powder. The oxidation of 1 with bromine gave trans-[Ru(16-TMC)(CN)2]+ isolated as PF6 salt (2.PF6). The Ru-C/C-N distances are 2.061(4)/1.130(5) and 2.069(5)/1.140(7) A for 1 and 2, respectively. Both complexes show a Ru(III/II) couple at 0.10 V versus FeCp2+/0. The UV-vis absorption spectrum of 1 is dominated by an intense high-energy absorption at lambda(max) = 230 nm, which is mainly originated from dpi(RuII) --> pi*(N[triple bond]C-Ru-C[triple bond]N) charge-transfer transition. Complex 2 shows intense absorption bands at lambda(max) pi*(N[triple bond]C-Ru-C[triple bond]N) and sigma(-CN) --> d(RuIII) charge-transfer transition, respectively. Density functional theory and time-dependent density-functional theory calculations have been performed on trans-[(NH3)4Ru(C[triple bond]N)2] (1') and trans-[(NH3)4Ru(C[triple bond]N)2]+ (2') to examine the Ru-cyanide interaction and the nature of associated electronic transition(s). The 230 nm band of 1 has been probed by resonance Raman spectroscopy. Simulations of the absorption band and the resonance Raman intensities show that the nominal nuC[triple bond]N stretch mode accounts for ca. 66% of the total vibrational reorganization energy. A change of nominal bond order for the cyanide ligand from 3 to 2.5 is estimated upon the electronic excitation.     

Spatial extent of the singlet and triplet excitons in luminescent angular-shaped transition-metal diynes and polyynes comprising non-pi-conjugated group 16 main group elements

A novel approach based on conjugation interruption has been developed and is presented for a series of luminescent and thermally stable chalcogen-bridged platinum(II) polyyne polymers trans-[{-Pt(PBu3)2C[triple bond]C(C6H4)E(C6H4)C[triple bond]C-}n] (E = O, S, SO, SO2). Particular attention was focused on the photophysical properties of these Group 10 polymetallaynes and comparison was made to their binuclear model complexes trans-[Pt(Ph)(PEt3)2C[triple bond]C(C6H4)E(C6H4)C[triple bond]CPt(Ph)(PEt3)2] and their closest Group 11 gold(I) and Group 12 mercury(II) neighbours, [MC[triple bond]C(C6H4)E(C6H4)C[triple bond]CM] (M = Au(PPh3), HgMe; E = O, S, SO, SO2). The regiochemical structures of these angular-shaped molecules were studied by NMR spectroscopy and single-crystal X-ray structural analyses. Upon photoexcitation, each one has an intense purple-blue fluorescence emission near 400 nm in dilute fluid solutions at room temperature. Harvesting of the organic triplet emissions harnessed through the strong heavy-atom effects of Group 10-12 transition metals was studied in detail. These metal-containing aryleneethynylenes spaced by chalcogen units were found to have large optical gaps and high-energy triplet states. The influence of metal- and chalcogen-based conjugation interrupters on the intersystem crossing rate and on the spatial extent of the lowest singlet and triplet excitons was fully elucidated. We discuss and compare the phosphorescence spectra of these transition-metal diynes and polyynes in terms of the nature of the metal centre, conjugated chain length and Group 16 spacer unit. Our work here indicates that high-energy triplet states in these materials intrinsically give rise to very efficient phosphorescence with fast radiative decays and one could readily observe room-temperature phosphorescence for the platinum polyynes.     

C-F or C-H bond activation and C-C coupling reactions of fluorinated pyridines at rhodium: synthesis, structure and reactivity of a variety of tetrafluoropyridyl complexes

Reactions of [RhH(PEt3)3] (1) or [RhH(PEt3)4] (2) with pentafluoropyridine or 2,3,5,6-tetrafluoropyridine afford the activation product [Rh(4-C5NF4)(PEt3)3] (3). Treatment of 3 with CO, 13CO or CNtBu effects the formation of trans-[Rh(4-C5NF4)(CO)(PEt3)2] (4a), trans-[Rh(4-C5NF4)(13CO)(PEt3)2] (4b) and trans-[Rh(4-C5NF4)(CNtBu)(PEt3)2] (5). The rhodium(III) compounds trans-[RhI(CH3)(4-C5NF4)(PEt3)2] (6a) and trans-[RhI(13CH3)(4-C5NF4)(PEt3)2] (6b) are accessible on reaction of 3 with CH3I or 13CH3I. In the presence of CO or 13CO these complexes convert into trans-[RhI(CH3)(4-C5NF4)(CO)(PEt3)2] (7a), trans-[RhI(13CH3)(4-C5NF4)(CO)(PEt3)2] (7b) and trans-[RhI(13CH3)(4-C5NF4)(13CO)(PEt3)2] (7c). The trans arrangement of the carbonyl and methyl ligand in 7a-7c has been confirmed by the 13C-13C coupling constant in the 13C NMR spectrum of 7c. A reaction of 4a or 4b with CH3I or 13CH3I yields the acyl compounds trans-[RhI(COCH3)(4-C5NF4)(PEt3)2] (8a) and trans-[RhI(13CO13CH3)(4-C5NF4)(PEt3)2] (8b), respectively. Complex 8a slowly reacts with more CH3I to give [PEt3Me][Rh(I)2(COCH3)(4-C5NF4)(PEt3)](9). On heating a solution of 7a, the complex trans-[RhI(CO)(PEt3)2] (10) and the C-C coupled product 4-methyltetrafluoropyridine (11) have been obtained. Complex 8a also forms 10 at elevated temperatures in the presence of CO together with the new ketone 4-acetyltetrafluoropyridine (12). The structures of the complexes 3, 4a, 5, 6a, 8a and 9 have been determined by X-ray crystallography. 19F-1H HMQC NMR solution spectra of 6a and 8a reveal a close contact of the methyl groups in the phosphine to the methyl or acyl ligand bound at rhodium.     

Unsupported gold(I)-copper(I) interactions through eta1 Au-[Au(C6F5)2]- coordination to Cu+ Lewis acid sites

The reaction of the complex [Au2Ag2(C6F5)4)N[triple bond]CCH3)2]n (1) with 1 equiv of CuCl in the presence of 1 equiv of pyrimidine ligand leads to the formation of the heteronuclear Au(I)-Cu(I) organometallic polymer [Cu{Au(C6F5)2}(N[triple bond]CCH3)(mu2-C4H4N2)]n (2) through a transmetalation reaction. Complex 2 displays unprecedented unsupported Au(I)...Cu(I) interactions of [Au(C6F5)2]- units with the acid Cu(I) sites in a [Cu(N[triple bond]CCH3)(mu2-pyrimidine)]n+(n) polymeric chain. Complex 2 has a rich photophysics in solution and in the solid state.     

Living photolytic ring-opening polymerization of amino-functionalized [1]ferrocenophanes: synthesis and layer-by-layer self-assembly of well-defined water-soluble polyferrocenylsilane polyelectrolytes

Facile synthetic routes have been developed that provide access to cationic and anionic water-soluble polyferrocenylsilane (PFS) polyelectrolytes with controlled molecular weight and narrow polydispersity. Living photolytic ring-opening polymerization of amino-functionalized [1]ferrocenophane (fc) monomers [fcSiMe{C[triple chemical bond]CCH(2)N(SiMe(2)CH(2))(2)}] (3), [fcSi{C[triple chemical bond]CCH(2)N(SiMe(2)CH(2))(2)}(2)] (10), [fcSiMe(C[triple chemical bond]CCH(2)NMe(2))] (14), and [fcSiMe(p-C(6)H(4)CH(2)NMe(2))] (20) yielded the corresponding polyferrocenylsilanes [(fcSiMe{C[triple chemical bond]CCH(2)N(SiMe(2)CH(2))(2)})(n)](5), [(fcSi{C[triple chemical bond]CCH(2)N(SiMe(2)CH(2))(2)}(2))(n)] (11), [{fcSiMe(C[triple chemical bond]CCH(2)NMe(2))}(n)] (15), and [{fcSiMe(p-C(6)H(4)CH(2)NMe(2))}(n)] (21) with controlled architectures. Further derivatization of 5, 15, and 21 generated water-soluble polyelectrolytes [(fcSiMe{C[triple chemical bond]CCH(2)N(CH(2)CH(2)CH(2)SO(3)Na)(2)})(n)] (6), [{fcSiMe(C[triple chemical bond]CCH(2)NMe(3)OSO(3)Me)}(n)] (7), and [{fcSiMe(p-C(6)H(4)CH(2)NMe(3)OSO(3)Me)}(n)] (22), respectively. The polyelectrolytes were readily soluble in water and NaCl aqueous solutions, with 6 and 22 exhibiting long-term stability in aqueous media. The PFS materials 6 and 22, have been utilized in the layer-by-layer (LbL) self-assembly of electrostatic superlattices. Our preliminary studies have indicated that films made from controlled low molecular-weight PFSs possess a considerably thinner bilayer thickness and higher refractive index than those made from PFSs that have an uncontrolled high molecular-weight. These results suggest that the structure and optical properties of LbL ultra-thin films can be tuned by varying polyelectrolyte chain length. The water-soluble low molecular weight PFSs are also useful materials for a range of applications including LbL self-assembly in highly confined spaces.     

Regioselective synthesis of indenols via nickel-catalyzed carbocyclization reaction

2-Halophenyl ketones 1a-e (1a, o-IC(6)H(4)COCH(3)) undergo carbocyclization with alkyl propiolates (2a, CH(3)(CH(2))(4)C[triple bond]CCO(2)CH(3); 2b, TMSC[triple bond]CCO(2)Et 2c, CH(3)C[triple bond]CCO(2)CH(3); 2d, CH(3)OCH(2)C[triple bond]CCO(2)CH(3); 2e, CH(3)(CH(2))(3)C[triple bond]CCO(2)CH(3); 2f, PhC[triple bond]CCO(2)CH(3); and 2g, (CH(3))(3)C[triple bond]CCO(2)CH(3)) in the presence of Ni(dppe)Br(2) and zinc powder in acetonitrile at 80 degrees C to afford the corresponding indenol derivatives 3a-m with remarkable regioselectivity in good to excellent yields. The nickel-catalyzed carbocyclization reaction was successfully extended to other simple disubstituted alkynes. Thus, the reaction of 2-halophenyl ketones 1a-e with disubstituted alkynes (2h, PhC[triple bond]CPh; 2i, CH(3)C(6)H(4)C[triple bond]CC(6)H(4)CH(3); 2j, CH(3)CH(2)C[triple bond]CCH(2)CH(3); 2k, PhC[triple bond]CCH(3); 2l, TMSC[triple bond]CCH(3); and 2m, PhC[triple bond]C(CH(2))(3)CH(3)) proceeded smoothly to afford the corresponding indenols 4a-t in good to excellent yields. For unsymmetrical alkynes 2k-m, the carbocyclization gave two regioisomers with regioselectivities ranging from 1:2 to 1:12 depending on the substituents on the alkyne and on the aromatic ring of halophenyl ketone. A possible mechanism for this nickel-catalyzed carbocyclization reaction is also proposed.     

Acetylide-bridged organometallic oligomers via the photochemical metathesis of methyl-iron(II) complexes

The acetylido methyl iron(II) complexes, cis/trans-[Fe(dmpe)(2)(C[triple bond]CR)(CH(3))] (1) and trans-[Fe(depe)(2)(C[triple bond]CR)(CH(3))] (2) (dmpe = 1,2-dimethylphoshinoethane; depe = 1,2-diethylphosphinoethane), were synthesized by transmetalation from the corresponding alkyl halide complexes. Acetylido methyl iron(II) complexes were also formed by transmetalation from the chloride complexes, trans-[Fe(dmpe)(2)(C[triple bond]CR)(Cl)] or trans-[Fe(depe)(2)(C[triple bond]CR)(Cl)]. The structure of trans-[Fe(dmpe)(2)(C[triple bond]CC(6)H(5))(CH(3))] (1a) was determined by single-crystal X-ray diffraction. The methyl acetylido iron complexes, [Fe(dmpe)(2)(C[triple bond]CR)(CH(3))] (1), are thermally stable in the presence of acetylenes; however, under UV irradiation, methane is lost with the formation of a metal bisacetylide. Photochemical metathesis of cis- or trans-[Fe(dmpe)(2)(CH(3))(C[triple bond]CR)] (R = C(6)H(5) (1a), 4-C(6)H(4)OCH(3) (1b)) with terminal acetylenes was used to selectively synthesize unsymmetrically substituted iron(II) bisacetylide complexes of the type trans-[Fe(dmpe)(2)(C[triple bond]CR)(C[triple bond]CR')] [R = Ph, R' = Ph (6a), 4-CH(3)OC(6)H(4) (6b), (t)()Bu (6c), Si(CH(3))(3) (6d), (CH(2))(4)C[triple bond]CH (6e); R = 4-CH(3)OC(6)H(4), R' = 4-CH(3)OC(6)H(4), (6g), (t)()Bu (6h), (CH(2))(4)C[triple bond]CH (6i), adamantyl (6j)]. The structure of the unsymmetrical iron(II) bisacetylide complex trans-[Fe(dmpe)(2)(C[triple bond]CC(6)H(5))(C[triple bond]CC(6)H(4)OCH(3))] (6b) was determined by single-crystal X-ray diffraction. The photochemical metathesis of the bis-acetylene, 1,7-octadiyne, with trans-[Fe(dmpe)(2)(CH(3))(C[triple bond]CPh)] (1a), was utilized to synthesize the bridged binuclear species trans,trans-[(C(6)H(5)C[triple bond]C)Fe(dmpe)(2)(mu-C[triple bond]C(CH(2))(4)C[triple bond]C)Fe(dmpe)(2)(C[triple bond]CC(6)H(5))] (11). The trinuclear species trans,trans,trans-[(C(6)H(5)C[triple bond]C)Fe(dmpe)(2)(mu-C[triple bond]C(CH(2))(4)C[triple bond]C)Fe(dmpe)(2)(mu-C[triple bond]C(CH(2))(4)C[triple bond]C)Fe(dmpe)(2)(C[triple bond]CC(6)H(5))] (12) was synthesized by the photochemical reaction of Fe(dmpe)(2)(C[triple bond]CPh)(C[triple bond]C(CH(2))(4)C[triple bond]CH) (6e) with Fe(dmpe)(2)(CH(3))(2). Extended irradiation of the bisacetylide complexes with phenylacetylene resulted in insertion of the terminal alkyne into one of the metal acetylide bonds to give acetylide butenyne complexes. The structure of the acetylide butenyne complex, trans-[Fe(dmpe)(2)(C[triple bond]CC(6)H(4)OCH(3))(eta(1)-C(C(6)H(5))=CH(C[triple bond]CC(6)H(4)OCH(3)))] (9a) was determined by single-crystal X-ray diffraction.     

Probing ruthenium-acetylide bonding interactions: synthesis, electrochemistry, and spectroscopic studies of acetylide-ruthenium complexes supported by tetradentate macrocyclic amine and diphosphine ligands

The synthesis and spectroscopic properties of trans-[RuL4(C[triple bond]CAr)2] (L4 = two 1,2-bis(dimethylphosphino)ethane, (dmpe)2; 1,5,9,13-tetramethyl-1,5,9,13-tetraazacyclohexadecane, 16-TMC; 1,12-dimethyl-3,4:9,10-dibenzo-1,12-diaza-5,8-dioxacyclopentadecane, N2O2) are described. Investigations into the effects of varying the [RuL4] core, acetylide ligands, and acetylide chain length for the [(-)C[triple bond]C(C6H4C[triple bond]C)(n-1)Ph] and [(-)C[triple bond]C(C6H4)(n-1)Ph] (n = 1-3) series upon the electronic and electrochemical characteristics of trans-[RuL4(C[triple bond]CAr)2](0/+) are presented. DFT and TD-DFT calculations have been performed on trans-[Ru(L')4(C[triple bond]CAr)2](0/+) (L' = PH3 and NH3) to examine the metal-acetylide pi-interaction and the nature of the associated electronic transition(s). It was observed that (1) the relationship between the transition energy and 1/n for trans-[Ru(dmpe)2{C[triple bond]C(C6H4C[triple bond]C)(n-1)Ph}2] (n = 1-3) is linear, and (2) the sum of the d(pi)(Ru(II)) --> pi*(C[triple bond]CAr) MLCT energy for trans-[Ru(16-TMC or N2O2)(C[triple bond]CAr)2] and the pi(C[triple bond]CAr) --> d(pi)(Ru(III)) LMCT energy for trans-[Ru(16-TMC or N2O2)(C[triple bond]CAr)2]+ corresponds to the intraligand pi pi* absorption energy for trans-[Ru(16-TMC or N2O2)(C[triple bond]CAr)2]. The crystal structure of trans-[Ru(dmpe)2{C[triple bond]C(C6H4C[triple bond]C)2Ph}2] shows that the two edges of the molecule are separated by 41.7 A. The electrochemical and spectroscopic properties of these complexes can be systematically tuned by modifying L4 and Ar to give E(1/2) values for oxidation of trans-[RuL4(C[triple bond]CAr)2] that span over 870 mV and lambda(max) values of trans-[RuL4(C[triple bond]CAr)2] that range from 19,230 to 31,750 cm(-1). The overall experimental findings suggest that the pi-back-bonding interaction in trans-[RuL4(C[triple bond]CAr)2] is weak and the [RuL4] moiety in these molecules may be considered to be playing a "dopant" role in a linear rigid pi-conjugated rod.     

C-F Bond activation at Ni(0) and simple reactions of square planar Ni(II) fluoride complexes

The reaction of Ni(COD)(2)(COD = 1,5-cyclooctadiene) with triethylphosphine and pentafluoropyridine in hexane has been shown previously to yield trans-[NiF(2-C(5)NF(4))(PEt(3))(2)](1a) with a preference for reaction at the 2-position of the heteroaromatic. The corresponding reaction with 2,3,5,6-tetrafluoropyridine was shown to yield trans-[NiF(2-C(5)NF(3)H)(PEt(3))(2)](1b). In this paper, we show that reaction of Ni(COD)(2) with triethylphosphine and pentafluoropyridine in THF yields a mixture of 1a and 1b. Competition reactions of Ni(COD)(2) with triethylphosphine in the presence of mixtures of heteroaromatics in hexane reveal a kinetic preference of k(pentafluoropyridine):k(2,3,5,6-tetrafluoropyridine)= 5.4:1. Treatment of 1a and 1b with Me(3)SiN(3) affords trans-[Ni(N(3))(2-C(5)NF(4))(PEt(3))(2)](2a) and trans-[Ni(N(3))(2-C(5)NHF(3))(PEt(3))(2)](2b), respectively. The complex trans-[Ni(NCO)(2-C(5)NHF(3))(PEt(3))(2)](3b) is obtained on reaction of with Me(3)SiNCO and by photolysis of under CO, while trans-[Ni(eta(1)-C [triple bond CPh)(2-C(5)NF(4))(PEt(3))(2)](4a) is obtained by reaction of phenylacetylene with 1a. Addition of KCN, KI and NaOAc to complex 1a affords trans-[Ni(X)(2-C(5)NF(4))(PEt(3))(2)](5a X = CN, 6a X = I, 7a X = OAc), respectively. The PEt(3) groups of complex are readily replaced by addition of 1,2-bis(dicyclohexylphosphino)ethane (dcpe) to produce [NiF(2-C(5)F(4)N)(dcpe)](8a). Addition of dcpe to trans-[Ni(OTf)(2-C(5)F(4)N)(PEt(3))(2)](10a), however, yields the salt [Ni(2-C(5)F(4)N)(dcpe)(PEt(3))](OTf)(9a) by substitution of only one PEt(3) and displacement of the triflate ligand. The structures of 2b, 4a, 7a and 8a were determined by X-ray crystallography. The influence of different ancillary ligands on the bond lengths and angles of square-planar nickel structures with polyfluoropyridyl ligands is analysed.     

Synthesis, characterisation and optical spectroscopy of platinum(II) di-ynes and poly-ynes incorporating condensed aromatic spacers in the backbone

A series of protected and terminal dialkynes with extended pi-conjugation through a condensed aromatic linker unit in the backbone, 1,4-bis(trimethylsilylethynyl)naphthalene, 1,4-bis(ethynyl)naphthalene, 9,10-bis(trimethylsilylethynyl)anthracene, 9,10-bis(ethynyl)anthracene, have been synthesized and characterized spectroscopically. The solid-state structures of and have been confirmed by single crystal X-ray diffraction studies. Reaction of two equivalents of the complex trans-[Ph(Et(3)P)(2)PtCl] with an equivalent of the terminal dialkynes 1,4-bis(ethynyl)benzene and, in (i)Pr(2)NH-CH(2)Cl(2), in the presence of CuI, at room temperature, afforded the platinum(II) di-ynes trans-[Ph(Et(3)P)(2)Pt-C[triple bond, length as m-dash]C-R-C[triple bond, length as m-dash]C-Pt(PEt(3))(2)Ph](R = benzene-1,4-diyl; naphthalene-1,4-diyl and anthracene-9,10-diyl ) while reactions between equimolar quantities of trans-[((n)Bu(3)P)(2)PtCl(2)] and under similar conditions readily afforded the platinum(II) poly-ynes trans-[-((n)Bu(3)P)(2)Pt-C[triple bond]C-R-C[triple bond]C-](n)(R = naphthalene-1,4-diyl and anthracene-9,10-diyl ). The Pt(II) diynes and poly-ynes have been characterized by analytical and spectroscopic methods, and the single crystal X-ray structures of and have been determined. These structures confirm the trans-square planar geometry at the platinum centres and the linear nature of the molecules. The di-ynes and poly-ynes are soluble in organic solvents and readily cast into thin films. Optical spectroscopic measurements reveal that the electron-rich naphthalene and anthracene spacers create strong donor-acceptor interactions between the Pt(II) centres and conjugated ligands along the rigid backbone of the organometallic polymers. Thermogravimetry shows that the di-ynes possess a somewhat higher thermal stability than the corresponding poly-ynes. Both the Pt(II) di-ynes and the poly-ynes exhibit increasing thermal stability along the series of spacers from phenylene through naphthalene to anthracene.     

The fixation of bis(2-pyridylimino)isoindolato (BPI) ligands to dendritic carbosilanes

Bis(2-pyridylimino)isoindolato (BPI) ligands, containing an alkynyl linker unit which allows their fixation to carbosilane dendrimers and dendrons, were synthesized by reaction of 4-nitrophthalodinitrile with 4-butynol giving the phthalodinitrile derivative containing the linker. These were subsequently reacted with two molar equivalents of 2-amino-4-methylpyridine and 2-amino-4-(t)butylpyridine yielding the respective BPI protioligands 2a and 2b. Lithiation with LDA and reaction with Si-Cl or Si-OTf (OTf=triflate) end groups in core or peripheral positions of dendritic carbosilanes gave the endodendrally and expdendrally functionalized dendrimers. Among these the first and second generation dendrimers [G-1](8-exo)-4-[C[triple bond, length as m-dash]CCH2CH2O]-10-MeBPI (8), [G-1]12-exo-4-[C[triple bond, length as m-dash]CCH2CH2O]-10-MeBPI (9) and [G-2](16-exo)-4-[C[triple bond, length as m-dash]CCH2CH2O]-10-MeBPI (10) were synthesized and fully characterized. The functional dendrimers were metallated by reaction with [(PhCN)2PdCl2] in dichloromethane to give the corresponding pallada-dendrimers.     

Synthesis and charge/discharge properties of polyacetylenes carrying 2,2,6,6-tetramethyl-1-piperidinoxy radicals

The 2,2,6,6-tetramethyl-1-piperidinoxy (TEMPO)-containing acetylenic monomers HC[triple bond]CC(6)H(3)-p,m-(CONH-4-TEMPO)(2) (1), HC[triple bond]CC(6)H(3)-p,m-(COO-4-TEMPO)(2) (2), (S,S,S,S)-HC[triple bond]CC(6)H(3)-p,m-[CO-NHCH{COO-(4-TEMPO)}CH(2)COO-(4-TEMPO)](2) (3), (S,S)-HC[triple bond]CC(6)H(4)CO-NHCH{COO-(4-TEMPO)}CH(2)COO-(4-TEMPO) (4), HC[triple bond]CC(6)H(4)-p-OCO-4-TEMPO (5), HC[triple bond]CCH(2)C(CH(3))(CH(2)OCO-4-TEMPO)(2) (6), HC[triple bond]CCH(2)NHCO-4-TEMPO (7), and HC[triple bond]CCH(2)OCO-4-TEMPO (8) were polymerized to afford novel polymers containing the TEMPO radical at high densities. Monomers 1, 3-6, and 8 provided polymers with average molecular weights of 10 000-136 500 in 62-99 % yield in the presence of a rhodium catalyst, whereas monomers 2 and 7 gave insoluble polymers in 100 % yield. The formed polymers were thermally stable up to approximately 274 degrees C according to thermogravimetric analysis (TGA). All the TEMPO-containing polymers demonstrated reversible charge/discharge processes, whose discharge capacities were 21.3-108 A h kg(-1). In particular, the capacity of poly(1)-, poly(4)-, and poly(5)-based cells reached 108, 96.3, and 89.3 A h kg(-1), respectively, which practically coincided with their theoretical values.     

Alcohol addition to acetonitrile activated by the [Re6(mu3-Se)8]2+ cluster core

The addition of methanol and ethanol to the previously reported cluster solvates [Re6(mu3-Se)8(PEt3)5(MeCN)](SbF6)2 and trans-[Re6(mu3-Se)8(PEt3)4(CH3CN)2][SbF6]2 afforded three cluster complexes with imino ester ligands: {Re6(mu3-Se)8(PEt3)5[HN=C(OCH3)(CH3)]}(SbF6)2, {Re6(mu3-Se)8(PEt3)5[HN=C(OCH2CH3)(CH3)]}{SbF6}2, and trans-{Re6(mu3-Se)8(PEt3)4[HN=C(OCH3)(CH3)]2}{SbF6}2. In all cases, predominant formation of the Z isomers was observed.     

Molecular QCA cells. 1. Structure and functionalization of an unsymmetrical dinuclear mixed-valence complex for surface binding

Utilization of binary information encoded in the charge configuration of quantum-dot cells (the quantum-dot cellular automata, QCA, paradigm) requires molecule-sized dots for room temperature operation. Molecular QCA cells are mixed-valence complexes, and the evaluation and functionalization of an unsymmetrical heterobinuclear, two-dot, Fe-Ru molecular QCA cell is described. The solid state structures of trans-RuCl(dppm)(2)(C[triple bond]CFc) (1) (dppm = methylbis(diphenylphosphane), Fc = (eta(5)-C(5)H(5))Fe(eta(5)-C(5)H(4))) and mixed-valence [trans-RuCl(dppm)(2)(C[triple bond]CFc)][BF(4)] (1a) as well as XPS and spectroscopic data suggest class II behavior suitable for the intended application. Utilization of the trans-Cl position of 1 permits functionalization for surface binding. Two "tailed" complexes of 1, trans-Ru(dppm)(2)(C[triple bond]CFc)(C[triple bond]CPhOCH(3)) (2) and trans-[Ru(dppm)(2)(C[triple bond]CFc)(N[triple bond]CCH(2)CH(2)NH(2))][PF(6)] (3), have been prepared and characterized. The solid state structure of 3 and multinuclear NMR experiments define the structures. In addition, the spectroscopic properties of all complexes and their mixed-valence species are used to define the effect of the substituent "tail" on mixed-valence properties. Further, the electrochemistry of these compounds permits assessment of the extent of perturbation of the substituents on the comproportionation constants and overall electrochemical stability. The complexes possess properties necessary for candidate QCA molecules.     

Cross [2 + 2] cycloaddition of bicyclic alkenes with alkynes mediated by cobalt complexes: a facile synthesis of cyclobutene derivatives.

Bicyclic alkenes 1a-e and 5 undergo [2 + 2] cycloaddition with a variety of alkynes PhC(triple bond)CPh, (TMS)C(triple bond)CH, HC(triple bond)C(CH(3))(2)OH, (TMS)C(triple bond)CCO(2)Et, PhC(triple bond)CCH(3), C(2)H(5)C(triple bond)CC(2)H(5), CH(3)C(triple bond)CC(3)H(7), and CH(3)C(triple bond)CC(2)H(5) in the presence of Co(PPh(3))(2)I(2), PPh(3), and Zn powder in toluene to afford the corresponding exo-cyclobutene derivatives 3a-m, 6, and 8a-g in fair to excellent yields. The yield of this cycloaddition is highly sensitive to the cobalt catalyst, solvent, ligand, and temperature used. A mechanism involving a metallacyclopentene intermediate is proposed to account for this cobalt-catalyzed cyclization.     

Dependence of field switched ordered arrays of dinuclear mixed-valence complexes on the distance between the redox centers and the size of the counterions

trans-[(H(2)NCH(2)CH(2)C triple bond N)(dppe)(2)Ru(C triple bond C)(6)Ru(dppe)(2)(N triple bond CCH(2)CH(2)NH(2))][PF(6)](2), 2[PF(6)](2), a derivative of trans-[Cl(dppe)(2)Ru(C triple bond C)(6)Ru(dppe)(2)Cl] functionalized for binding to a silicon substrate, has been prepared and characterized spectroscopically, electrochemically, and with a solid state, single-crystal structure determination. Covalent binding via reaction of one amine group to a boron-doped, smooth Si-Cl substrate is verified by XPS measurements and surface electrochemistry. Vertical orientation is demonstrated by film thickness measurements. Synthesis of the 2[PF(6)](3) mixed-valence complex on the surface is established by electrochemical techniques. Measurement of the ac capacitance of the film at 1 MHz as a function of voltage across the film with a pulse-counter pulse technique demonstrates controlled electric field generation of the two stable mixed-valence forms differing in the spatial location of one electron, that is, switching. As compared to [trans-Ru(dppm)(2)(C triple bond CFc)(NCCH(2)CH(2)NH(2))][PF(6)][Cl], 1[PF(6)][Cl], the magnitude of the capacitance signal per complex observed on switching is shown to increase with increasing distance between the metal centers. Additional experiments on 1[X][Cl] show that the potential for switching 1[X][Cl] increases in the order [X](-) = [SO(3)CF(3)](-) < [PF(6)](-) < [Cl](-). A simple electrostatic model suggests that the smaller is the counterion, the greater is the perturbation of the metal sites and the larger is the barrier for switching.     

Cluster carbonyls of the [Re6(mu3-Se)8]2+ core

The first [Re(6)(mu(3)-Se)(8)](2+) core-containing cluster carbonyls, [Re(6)(mu(3)-Se)(8)(PEt(3))(5)(CO)][SbF(6)](2) and trans-[Re(6)(mu(3)-Se)(8)(PEt(3))4(CO)(2)][SbF(6)](2), were produced by reacting [Re(6)(mu(3)-Se)(8)(PEt(3))(5)I]I and trans-[Re(6)(mu(3)-Se)8(PEt(3))(4)I2], respectively, with AgSbF(6) in CO-saturated dichloromethane solutions. Spectroscopic and crystallographic studies suggest significant cluster-to-CO back-donation in these novel cluster derivatives and interesting electronic structures. Thermal and photolytic studies of the mono-carbonyl complex revealed its interesting and synthetically useful reactivity in producing new cluster derivatives.