纳米银增敏化学发光体系测定间苯二酚

采用柠檬酸钠包覆化学还原法制备纳米银粒子,将该纳米银粒子加入到碱性鲁米诺-铁氰化钾化学发光体系,体系的化学发光强度明显增强,而间苯二酚的加入能抑制该体系的化学发光,据此建立了流动注射化学发光法定量分析痕量间苯二酚的新方法.考察了鲁米诺、铁氰化钾、氢氧化钠以及纳米银浓度对化学发光体系的影响.在优化的实验条件下,该方法测定...     

吸附相反应技术制备Ag纳米粒子的反应机理

利用吸附相反应技术在SiO2表面制备Ag粒子, 研究了温度变化对载体表面NaOH的吸附、生成Ag的反应过程以及产物Ag粒子形貌的影响. NaOH的吸附率测定结果表明, 吸附平衡时间随着温度升高而增加. 温度升高加快了NaOH与Si—O—Si的反应, 使得NaOH的平衡吸附率不随吸附层的破坏而减少. 采用实时在线UV-Vis光谱研究了Ag粒子的生成过程, 发现温度超过40 ℃时, 反应体系中Ag出现的时间、Ag粒子的浓度和粒径分布范围都发生较大变化. 样品的TEM和XRD分析也表明, 当体系温度超过40 ℃时SiO2表面Ag粒子出现了团聚, 其晶粒粒径也出现了突变. 温度升高导致表面吸附层破坏, 使得Ag的生成场所从吸附层转移到SiO2表面, 最终导致Ag的反应机理和粒子形貌的变化.     

The Kinetic Rate Law for the Autocatalytic Growth of Citrate‐Stabilized Silver Nanoparticles

The formation of sodium citrate stabilized spherical silver nanoparticles synthesized by homogeneous nucleation in aqua solutions was monitored by the method of direct potentiometry. It was observed that the kinetic curve of Ag⁺ ions reduction can be described by the Finke–Watzky (FW) autocatalytic two–step mechanism in the case of a large excess of hydrazine and NaOH. To expand the FW minimalistic model, the impact of the starting concentrations of the reagents on the kinetics of Ag nanoparticles synthesis was studied. It was determined that the nucleation stage is limited by the homogeneous process of ions Ag⁺ reduction, and the reaction orders for the all reagents are calculated. A surface–dependent model of Ag nanoparticle growth is proposed, which takes into account the change in the hydrazine and alkali concentrations; the rate constants of the pseudoelementary reactions are also calculated.     

Spectroscopic and fluorescence properties of silver-dye composite nanoparticles

The aim of this work was to investigate the formation of J-aggregates of thiacyanine dye (TC, 5,5′-disulfopropyl-3,3′-dichlorothiacyanine sodium salt) in the presence of 6 nm spherical silver nanoparticles (Ag NPs) using spectrophotometric and fluorescence methods. The formation of J-aggregates was concentration dependent and characterized by the appearance of the new absorption band with the maximum at 481 nm. Spectrophotometric study of J-aggregate formation and time stability suggested that they were formed on the account of monomer form of TC. Moreover, the stability of J-aggregates increased with the lowering AgNPs concentration. The measurements of fluorescence of the NPs—dye assembly clearly indicated that the fluorescence of TC was quenched by Ag NPs on the concentration dependent manner. The spectrophotometric and fluorescence properties of NPs—dye assembly were found to be quantitatively related to the surface coverage of the dye on the Ag NPs.     

Dealloyed Silver Nanoparticles as Efficient Catalyst Towards Oxygen Reduction in Alkaline Solution

Silver nanoparticles(Ag NPs) were prepared by dealloying Mg-Ag alloy precursor. The obtained Ag NPs have an average ligament size of (50±10) nm. Electrocatalytic activity of Ag NPs towards oxygen reduction reaction(ORR) in 0.1 mol/L NaOH solution was assessed via cyclic voltammetry(CV), rotating ring disk elec-trode(RRDE) techniques, and electrochemical impedance spectroscopy(EIS). The electrochemical active area for the ORR was evaluated by means of the charge of the underpotential deposition(UPD) of lead(Pb) on Ag NPs. The CV results indicate that Ag NPs have a higher current density and more positive onset potential than the bulk Ag electrode. RRDE was employed to determine kinetic parameters for O₂ reduction. Ag NPs exhibit a higher kinetic current density of 25.84 mA/cm² and a rate constant of 5.45×10^-2 cm/s at -0.35 V vs. Hg/HgO. The number of electrons(n) involved in ORR is close to 4. Further, EIS data show significantly low charge transfer resistances on the Ag NPs electrode. The results indicate that the prepared Ag NPs have a high activity and are promising catalyst for ORR in alkaline solution.     

A Facile Synthesis of Cu NPs and Ag NPs Coated by PS with Core–Shell Structure by Precipitation Polymerization

Copper nanoparticles (Cu NPs ) coated with polystyrene (PS ) (Cu NPs @PS ) were prepared by precipitation polymerization. First, Cu NPs were prepared by chemical reduction using cupric acetate as precursor, sodium polyacrylate (PAANa ) as stabilizer, and hydrazine hydrate as reducing agent. Then Cu NPs were coated by precipitation polymerization using styrene as monomer, 3‐(trimethoxysilyl) propyl acrylate as co‐monomer, and 2, 2‐azobisisobutyronitrile (AIBN ) as initiator. Ultraviolet–visible (UV –vis) spectroscopy and transmission electron microscopy (TEM ) results showed that stable composite particles could be synthesized by precipitation polymerization. The amount of PAANa had a significant effect on the size of Cu NPs . The addition of more PAANa resulted in smaller Cu NPs . The spherical Cu NPs became nanowires when increasing the stirring rate from 350 to 700 rpm during precipitation polymerization. Ag NPs @PS with core–shell structure were also prepared by this method, which appears to be universal.     

Formation of multishell Au@Ag@Pt nanoparticles by coreduction method: a microscopic study

Metallic nanoparticles of Ag–Pt double-shell on Au-core (Au@Ag@Pt core@multishell NPs) with a hollow-granular shell structure were synthesized by coreduction method, a combination of galvanic replacement reaction with a coreducing agent. Their nanostructures were examined in detail at different reduction reaction periods to gain insights into the mechanism of Ag–Pt double-shell formation on Au-core, as well as the competitive role of each reduction reaction. The multishell NPs were found to contain a degree of hollows with the inner surface composed of both Ag and Pt, while the outer surface composed of granular Pt. The coreduction method contributed to the success of increasing Pt surface area that will further benefit catalytic applications of the NPs.     

Cellulose/silver nanoparticles composite microspheres: eco-friendly synthesis and catalytic application

Cellulose/silver nanoparticles (Ag NPs) composites were prepared and their catalytic performance was evaluated. Porous cellulose microspheres, fabricated from NaOH/thiourea aqueous solution by a sol–gel transition processing, were served as supports for Ag NPs synthesis by an eco-friendly hydrothermal method. The regenerated cellulose microspheres were designed as reducing reagent for hydrothermal reduction and also micro-reactors for controlling growth of Ag NPs. The structure and properties of obtained composite microspheres were characterized by Optical microscopy, UV–visible spectroscopy, WXRD, SEM, TEM and TG. The results indicated that Ag NPs were integrated successfully and dispersed uniformly in the cellulose matrix. Their size (8.3–18.6?nm), size distribution (3.4–7.7?nm), and content (1.1–4.9?wt%) were tunable by tailoring of the initial concentration of AgNO₃. Moreover, the shape, integrity and thermal stability were firmly preserved for the obtained composite microspheres. The catalytic performance of the as-prepared cellulose/Ag composite microspheres was examined through a model reaction of 4-nitrophenol reduction in the presence of NaBH₄. The composites microspheres exhibited good catalytic activity, which is much high than that of hydrogel/Ag NPs composites and comparable with polymer core–shell particles loading Ag NPs.     

Internally dispersed synthesis of uniform silver nanoparticles via in situ reduction of [Ag(NH3)2]+ along natural microfibrillar substructures of cotton fiber

Silver nanoparticles (Ag NPs) are known to have efficient antimicrobial properties, but the direct application of Ag NPs onto the surface of textiles has shown to be ineffective and raise environmental concerns because Ag NPs leach out during washing. In this study, non-leaching and stable Ag-cotton nanocomposite fiber was produced by the in situ formation of Ag NPs inside the cotton fiber. The reported method is to introduce a nanofluidic system in alkali-swollen cotton fiber. Sequential flows of [Ag(NH₃)₂]⁺ and reductant aqueous fluids into the opened microfibrillar channels yielded a self-assembly of Ag ions on the deprotonated cellulose and subsequent nucleation and particle growth on the microfibrils. Transmission electron and field emission scanning electron microscopy images showed Ag NPs evenly dispersed throughout the entire cross-section of the fiber and their fixation onto the isolated secondary cell wall, respectively. Despite the rapid reduction reaction and the absence of a stabilizing agent, the successful formation of monodispersed Ag NPs (12 ± 3 nm) was attributed to the self-controlled function of the highly organized microfibrillar substructures, which regulated the transport and mixing of reactants. Incorporation of Ag NPs into the internal structure of the cotton fiber did not significantly influence the cotton crystalline structure.     

Synthesis of Ag/SiO2 nanocomposite material by adsorption phase nanoreactor technique

Ag/SiO₂ nanocomposite was synthesized in a nanoreactor formed by adsorption layer on silica surface. Ag nanoparticles were prepared by the reduction of Ag ion with ethanol at alkaline condition. By using TEM and XRD, the effects of NaOH concentration, water and temperature on the appearance and grain size of Ag particles were analyzed, respectively. The adsorption curve of NaOH was measured by electrical conductivity meter. The experiment result revealed that Ag grain size decreased while increasing NaOH concentration or while increasing water in our system. Ag grain size increased with the increase of temperature. And Ag aggregated seriously when temperature is up to 60 °C. Finally, after exploring the optimum conditions of reaction, we successfully obtained the well-distributed Ag nanoparticles on surface of silica, and average grain size of Ag nanoparticles reached 5 nm.     

Synthesis and characterization of Au core-Au-Ag shell nanoparticles from gold seeds: impacts of glycine concentration and pH

This paper describes the preparation of Au core-Au-Ag shell nanoparticles (NPs) in different morphologies by controlling both the pH and the glycine concentration. Using a seed-growth method, we prepared high-quality Au core-Au-Ag shell NPs from a glycine solution under alkaline conditions (pH>8.5). By controlling both the pH and the glycine concentration, we prepared dumbbell-shaped and peanut-shaped Au core-Au-Ag shell NPs readily by depositing gold and silver, reduced by ascorbate, onto the gold nanorods. We have found that the glycine concentration that is optimal for preparing high-quality Au core-Au-Ag shell NPs differs at the various values of pH. At pH<8.5, the glycine concentration is not important, but, when preparing dumbbell- and peanut-shaped Au core-Au-Ag shell NPs, it should be greater than 50 mM and greater than 20 mM at pH 9.5 and 10.5, respectively. Glycine plays a number of roles during the synthesis of the Au core-Au-Ag shell NPs by controlling the solution pH, altering the reduction potentials of gold and silver ions through forming complexes with metal ions (Au(+) and Ag(+)), minimizing the formation of Ag(2)O, AgCl, and AgBr precipitates, and stabilizing the thus-prepared NPs. At pH 9.7, we observed the changes in the morphologies of the Au core-Au-Ag shell NPs-from regular (rectangular) to peanut- and dumbbell-shaped, and finally to jewel-, diamond-, and/or sphere-shaped-that occurred during the course of a 60-min reaction. In addition, we were able to affect the shapes and sizes of the Au core-Au-Ag shell NPs by controlling the reaction time.     

Hyperbranched polyglycidol assisted green synthetic protocols for the preparation of multifunctional metal nanoparticles

Biocompatible hyperbranched polyglycidol (HBP) has been demonstrated to be an effective reducing and stabilizing agent for the synthesis of highly water-soluble monometallic (Au, Ag, Pt, Pd, and Ru) and bimetallic (Au/Pt, Au/Pd, and Au/Ru) nanoparticles (NPs), which provides a general and green protocol to fabricate metal NPs. The HBP-assisted reduction of metal ions follows an analogous polyol process. The reduction reaction rate increases sharply by increasing the temperature and the molecular weight of HBP. The size of NPs is controllable simply by changing the concentration of the metal precursor. High molecular weight HBP is favorable for the formation of NPs with uniform size and improved stability. By utilizing hydroxyl groups in the HBP-passivation layer of Au NPs, TiO(2)/Au, GeO(2)/Au, and SiO(2)/Au nanohybrids are also fabricated via sol-gel processes, which sets a typical example for the creation of versatile metal NPs/inorganic oxide hybrids based on the as-prepared multifunctional NPs.     

In situ formation of silver nanoparticles in PMMA via reduction of silver ions by butylated hydroxytoluene

Silver nanoparticles (Ag NPs) were efficiently generated by in situ reduction of silver ions via butylated hydroxytoluene (BHT), in poly(methyl methacrylate). The characterization of Ag/PMMA by TEM, SEM, XRD, and FTIR indicated that Ag NPs with a face center cubic (fcc) crystal structure and a mean diameter of about 30 nm were dispersed in PMMA matrix with a relatively uniform distribution. In addition, the results of UV–Vis spectroscopy indicated that optical properties of the nanocomposite appeared mainly dependent on the reaction time and temperature. Increasing the reaction time and temperature make higher yield of Ag NPs. A provisional reduction mechanism was also proposed for the formation of the Ag NPs.     

Electrochemical formation and reduction of silver oxides in alkaline media

The anodic oxidation of silver electrodes in NaOH solution and the reduction of the silver oxides formed were studied by potential step chronoamperometry. Oxidation of Ag to Ag₂O is a diffusion-controlled reaction, the diffusion control being established in the solid phase. Oxidation of Ag₂O to AgO proceeds via a nucleation and growth-controlled process. The amount of AgO decreased with increasing step height. The current—time curves for this reaction have been analysed with the Kolmogoroff—Avrami equation. Reduction of AgO to Ag₂O occurs initially on the outside of the electrode, and the rate of the reaction is limited by diffusion of ions across the thickening layer of Ag₂O. Reduction of Ag₂O to Ag proceeds via a nucleation and growth reaction.     

Mechanistic studies on the formation of silver nanowires by a hydrothermal method

Silver (Ag) nanowires were fabricated from silver chloride (AgCl) by the hydrothermal method. The successful formation of Ag nanowires relied on the low solubility of AgCl as a precursor and the structural change of glucose to polymer on the Ag nanowire (protective layer). The Ag(+) ion concentration in the reaction solution containing AgCl was initially low, but after a reaction time of over 12 h, Ag(+) gradually reduced to Ag metal. Transmission electron microscope, Raman spectrometery, and X-ray photoelectron spectroscopy revealed that the surface of the obtained Ag nanowires possessed a carbon-rich layer with a carboxyl group, and the Ag(+) ion coordinated with the carboxyl group of this layer. The difference in the surface-free energy of Ag crystals changed the crystal growth rate that impelled the anisotropic growth of the Ag particles. By examining various reaction conditions, it was determined that the ratio of Cl(-) to Ag(+), reaction temperature, and reaction time are important factors for successful preparation of Ag nanowires. Under the reaction condition that the molar ratio of Cl(-) to Ag(+) at 160 °C for 24 h is above equimolar concentration, uniform Ag nanowires were successfully prepared.     

One-step synthesis of silver nanoparticles by sonication or heating using amphiphilic block copolymer as templates

Block copolymer-supported Ag Nps (nanoparticles) have either a "cherry"-like or "raspberry"-like morphology [Antonietti, et al., Adv. Mater. 7 (1995) 1000-1005] depending on the amount of silver nitrate loading and the external conditions. Sonication favors silver nitrate and polyethyleneimine diffusion; the nucleation sites are well distributed in the micellar cores, so it is easy to form the cherry-like Ag NP colloids. However, when the amount of silver nitrate is decreased, it is heating that induces the formation of raspberry-like Ag NP colloids. The Ag NP colloids were investigated by transmission electron microscopy to demonstrate the nanosize dimensions and the location of the Ag NPs in the micelles. X-ray diffraction was employed to determine the crystal structure of the Ag NPs. UV-vis spectroscopy was employed for further qualitative characterization of the optical properties of Ag NPs.     

Mechanistic studies on particle nucleation in the batch emulsion polymerisation of<Emphasis Type="Italic"> n</Emphasis>-butyl acrylate containing multifunctional monomers

This paper reports the mechanistic details concerning the synthesis of crosslinked poly(n-butyl acrylate) dispersions intended to be used as seeds in the preparation of core-shell emulsions. The influence of crosslinking comonomers and the amount and type of surfactants on the kinetics, particle nucleation, particle size and particle size distribution in the batch emulsion polymerisation of n-butyl acrylate (BA) is explored. In the case of EGDA (ethylene glycol diacrylate) crosslinker the particle number decreased with increasing crosslink density, whereas the opposite trend was observed in the case of m-diisopropenylbenzene (m-DIPB) in the presence and absence of the surfactant sodium dodecyl sulfate (SDS). The observed behaviour is mainly attributed to the variation in the aqueous phase kinetics caused by the water solubility of the comonomer, which influences the formation rate of precursor particles during the nucleation stage. Only for the less water soluble crosslinker, DIPB, could the increase of particle number be explained within the Smith–Ewart theory by assuming prolonged nucleation due to reduced swelling of growing particles with monomer as a result of the crosslinking reaction.Abbreviations EGDA ethylene glycol diacrylate - m-DIPB meta-diisopropenylbenzene - SDS sodium dodecyl sulfate - PBA poly(n-butyl acrylate) - AFFF asymmetric field flow fractionation - MALLS multiangle laser light scattering - CMC critical micelle concentration     

Photodeposition of Ag2S quantum dots and application to photoelectrochemical cells for hydrogen production under simulated sunlight

UV light irradiation of TiO(2) (λ > 320 nm) in a mixed solution of AgNO(3) and S(8) has led to the formation of Ag(2)S quantum dots (QDs) on TiO(2), while Ag nanoparticles (NPs) are photodeposited without S(8). Photoelectrochemical measurements indicated that the Ag(2)S photodeposition proceeds via the preferential reduction of Ag(+) ions to Ag(0), followed by the chemical reaction with S(8). The application of this in situ photodeposition technique to mesoporous (mp) TiO(2) nanocrystalline films coated on fluorine-doped SnO(2) (FTO) electrodes enables formation of Ag(2)S QDs (Ag(2)S/mp-TiO(2)/FTO). Ag(2)S/mp-TiO(2)/FTO has the interband transition absorption in the whole visible region, while in the spectrum of Ag/mp-TiO(2)/FTO, a localized surface plasmon resonance absorption of Ag NPs is present centered at 490 nm. Ag(2)S QD-sensitized photoelectrochemical cells using the Ag(2)S/mp-TiO(2)/FTO and Ag/mp-TiO(2)/FTO photoanodes were fabricated. Under illumination of one sun, the Ag(2)S photoanode cell yielded H(2) at a rate of 0.8 mL·h(-1) with a total conversion efficiency of 0.29%, whereas the Ag/mp-TiO(2)/FTO photoanode is inactive.     

In Situ Monitoring of Pt Nanoparticle Formation in Ethylene Glycol Solution by SAXS-Influence of the NaOH to Pt Ratio

The temporal evolution of Pt nanoparticle formation in ethylene glycol solution from H(2)PtCl(6)·6H(2)O at 90 °C for different molar ratios of NaOH to Pt (84, 6.5, and 2) in the presence or absence of poly(N-vinyl-2-pyrrolidone) (PVP) as protecting agent was followed in situ by small-angle X-ray scattering (SAXS). The SAXS profiles were analyzed regarding particle size and size distribution using the Guinier approximation and the indirect Fourier transform technique (IFT). The NaOH to Pt ratio has an influence on the integral nanoparticle formation rate as well as on the metal reduction rate and the ratio of nucleation to growth reactions. The fastest nanoparticle formation rate was observed for the NaOH/Pt ratio of 6.5. The obtained results indicate that the differences in the particle formation rate might be due to differences in the reduction rate of the formed Pt complexes. In alkaline reaction media (NaOH/Pt = 84 or 6.5), small nanoparticles with a relatively narrow size distribution were formed. Therefore, it is assumed that for these NaOH/Pt ratios the particle formation is dominated by nucleation reactions. Additionally, the in situ studies point out that nanoparticles prepared at the NaOH/Pt ratio of 84 do not grow further after attaining a certain particle size. For a NaOH to Pt ratio of 2, that means in acidic medium, particle formation should be dominated by growing processes and, therefore, larger particles are formed accompanied by a broader particle size distribution. The influence of PVP on the nanoparticle formation rate is relatively low. However, in acidic medium, the presence of PVP is necessary in order to protect the formed nanoparticles from irreversible aggregation reactions.     

Induction and Acceleration of Bonelike Apatite Formation on Tantalum Oxide Gel in Simulated Body Fluid

Untreated tantalum metal forms bonelike apatite layer on its surface in a simulated body fluid (SBF) after a long period. The apatite formation on the tantalum metal is significantly accelerated, when the metal was previously subjected to NaOH and heat treatments to form an amorphous sodium tantalate on its surface. The fast formation of the apatite on the NaOH- and heat-treated tantalum metal was explained as follows. The sodium tantalate on the surface of the metal releases the Na⁺ ion via exchange with H₃O⁺ ion in SBF to form a lot of Ta-OH groups on its surface. Thus formed Ta-OH groups induce the apatite nucleation and the released Na⁺ ion accelerates the apatite nucleation by increasing ionic activity product of the apatite in SBF due to increase in OH^– ion concentration. In the present study, in order to confirm this explanation, apatite formations on sodium tantalate gels with different Na/Ta atomic ratios, which were prepared by a sol-gel method were investigated. It was found that even Na₂O-free tantalum oxide gel forms the apatite on its surface in SBF. This proves that the Ta-OH groups abundant on the gel can induce the apatite nucleation. The apatite-forming ability of the gels increased with increasing Na/Ta atomic ratios of the gels. The sodium-containing tantalum oxide gels released the Na⁺ ion, the amount of which increased with increasing Na/Ta atomic ratios of the gels. The released Na⁺ ion gave an increase in pH of SBF. These results prove that the apatite nucleation induced by the Ta-OH groups is accelerated with the released Na⁺ ion by increasing ionic activity product of the apatite in SBF.