Sonochemical synthesis of polyaniline nanofibers

Conventionally, micro-sized irregular polyaniline (PANI) particles were synthesized by dropwise addition of the ammonium persulfate (APS) solution into the aniline (ANI) solution with mechanical stirring. By replacing the mechanical stirring with an ultrasonic irradiation, PANI nanofibers in diameters of approximately 50 nm and lengths of 200 nm to several micrometers were prepared. Transmission electron microscopy (TEM) and scanning electron microscopy (SEM) showed that at the early stage of polymerization, the polymers formed in both the mechanical stirred and ultrasonicated systems are in the form of nanofiber. However, with continuing of the reaction, these primary nanofibers grow and agglomerate into irregular shaped PANI particles in the mechanical stirred system, while in the case of the ultrasonic irradiation, the growth and agglomeration are effectively prevented, preserving thus the PANI nanofibers in the final product. By increasing the APS/ANI molar ratio from 0.5 to 2.5, the aspect ratios of the PANI nanofibers decreased. The PANI nanofibers exhibit higher solubility than the irregular shaped PANI particles. Although the yield, as well as the conductivity of the ultrasonic synthesized PANI nanofibers, was slightly lower than the irregular shaped PANI particles, the ultrasonic synthesis approach is one of the facile and scalable approaches in synthesizing PANI nanofibers in comparison with other ones without use of templates (e.g., the interfacial polymerization and rapid mixing polymerization). UV-Vis and Fourier transformed infrared (FTIR) spectra indicated ultrasound had no significant effect on the chemical structure of the PANI.     

Sonochemical synthesis of iron phosphide

The sonochemical reaction of Fe(CO)5 and triethylphosphine has been found to produce solid amorphous iron phosphide of composition FeP. The resulting compound was characterized by elemental microanalysis, scanning electron microscopy, energy-dispersive X-ray analysis, and Debye-Scherrer powder X-ray diffraction. X-ray powder patterns were obtained after the amorphous material had been heated above 950 degrees C and then slowly cooled to induce crystallization. This reaction provides the first use of ultrasound to sonochemically synthesize amorphous phosphide semiconductor materials from organometallic precursors.     

Sonochemical synthesis of liquid-encapsulated lysozyme microspheres

Liquid-encapsulated lysozyme microspheres were successfully synthesized using a sonochemical method. The encapsulation of four different liquids, namely, sunflower oil, tetradecane, dodecane and perfluorohexane on the formation, stability and morphology of the lysozyme microspheres was studied. Among the four different liquids used for encapsulation, perfluorohexane-filled microspheres were found to be most stable in the dried state with a narrow size distribution. In order to explore the possibility of encapsulating biofunctional molecules (e.g., drugs) within these microspheres, liquids containing a fluorescent dye (Nile red) were encapsulated and the ultrasound-induced release of these dye-loaded liquids was studied. The fluorescence data for the liquid-filled lysozyme microspheres demonstrated the potential use of the sonochemical technique for synthesizing these “vehicles” for the encapsulation and the controlled delivery of dyes, flavours, fragrances or drugs.     

Sonochemical synthesis of hierarchical ZnO nanostructures

This work is about fabrication of ZnO nanostructures (ZnO-NS) via a simple sonochemical method. The chemicals used for the synthesis of various shaped ZnO are Zn salt, sodium hydroxide and ammonia solution without other structure directing agent or surfactant needed. This method is feasible and green, as it does not require high temperature and/or highly toxic chemicals. The shape of the ZnO-NS can be tuned by adjusting the ultrasound energy dissipated via varying the ultrasonication time from 5 to 60 min. It was found that uniform ZnO nanorods with diameter around 50 nm were formed after 15 min of ultrasonication while flowerlike ZnO-NS was formed after 30 min. This method produces high quality ZnO-NS with controllable shapes, uniformity, and purity.     

Sonochemical synthesis of zeolite NaP from clinoptilolite

In the present work, natural clinoptilolite was converted to zeolite NaP using ultrasonic energy, in which the transformation time shortened remarkably. The effect of post-synthesis treatment using conventional hydrothermal was also investigated. The synthesized powders were characterized by XRD, TGA/DTA, SEM, and PSD analysis. The results showed that, increasing the sonication time (energy) has no significant effect on the product’s morphology. The crystallinity of the synthesized samples increased slightly with increasing sonication time, but their yield remained relatively unchanged. Furthermore, post-synthesis hydrothermal treatment showed very little influence on properties of the final product. Because the ultrasonic irradiation creates acoustic cavitation cracks on the surface structure of clinoptilolite particulates and increases the concentration of soluble alumino-silicate species, which favors the prevailing super-saturation, crystallization and crystal growth of zeolite NaP happen faster. The particles of zeolite NaP synthesized by ultrasonic irradiation consist of small crystallites of uniform size.     

Sonochemical synthesis of versatile hydrophilic magnetite nanoparticles

Hydrophilic magnetite nanoparticles in the size range 30-10 nm are easily and rapidly prepared under ultrasonic irradiation of Fe(OH)₂ in di- and tri-ethylene glycol/water solution with volume ratio varying between 7:3 and 3:7.Structural (XRD) and morphological (SEM) characterization reveal good crystalline and homogeneous particles whereas, when solvothermally prepared, the particles are inhomogeneous and aggregated. The sonochemically prepared particles are versatile, i.e. well suited to covalently bind molecules because of the free glycol hydroxylic groups on their surface or exchange the diethylene or triethylene glycol ligand. They can be easily transferred in hydrophobic solvents too.Room-temperature magnetic hysteresis properties measured by means of Vibrating Sample Magnetometer (VSM) display a nearly superparamagnetic character.The sonochemical preparation is easily scalable to meet industrial demand.     

Sonochemical synthesis of CuO nanostructures with different morphology

This paper describes a highly efficient and rapid approach of synthesizing different CuO nanostructures in aqueous solutions using ultrasound irradiation of copper(II) acetate with urea/sodium hydroxide in the presence of polyvinylpyrrolidone (PVP), as stabilizing polymer. Field emission scanning electron microscope images clearly indicate the formation of CuO quasi-spherical microarchitectures and long-straw like structure in the presence of urea and sodium hydroxide. Other characterization techniques such as TEM, XRD and XPS are also provided to support the formation of such structures. One of the reasons for the formation of such CuO nanostructures may be due to the formation of a polymer-metal complex with the stabilizing polymer (PVP).     

Sonochemical synthesis and characterization of NiMoO4 nanorods

NiMoO₄ nanorods have been successfully synthesized by sonochemical method process by using Ni(CH₃COO)₂·4H₂O and (NH₄)₆Mo₇O₂₄·4H₂O as starting materials. Some parameters including ultrasonic power, ultrasonic irradiation time, stirring effect, solvent effect, and surfactant effect were investigated to reach optimum condition. The as synthesized nanostructures were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmittance electron microscopy (TEM), photoluminescence (PL) spectroscopy, Fourier transform infrared (FT-IR) spectra and energy dispersive X-ray microanalysis (EDX). Facile preparation and separation are important features of this route. This work has provided a general, simple, and effective method to control the composition and morphology of NiMoO₄ in aqueous solution, which will be important for inorganic synthesis methodology.     

Sonochemical synthesis and optical properties of amorphous ZnO nanowires

Large-scale amorphous wire-like ZnO nanostructures were prepared by ultrasonic spray pyrolysis Zn(CO)₅ without involvement of any template or patterned catalyst. The as-obtained amorphous ZnO nanowires were characterized using scanning/transmission electron microscopy, X-ray diffraction/photoelectron spectroscopy, energy-dispersed X-ray spectrometry, selected area electronic diffraction, and high-resolution transmission electron microscopy. The results reveal the as-made noncrystalline samples are about 30–60 nm in diameter and several tens of microns in length and the growth mechanism is tentatively proposed as the self-assembly soft template mechanism. The photoluminescence spectra in all of the as-studied specimens exhibit one wide visible emission peak in about 508 nm. The corresponding PL intensity greatly increased with an annealing temperature, which has an application for a high efficiency vacuum fluorescent displays and a low-voltage phosphor.     

Sonochemical assisted synthesis of SrFe12O19 nanoparticles

We present the synthesis of M-type strontium hexaferrite by sonochemistry and annealing. The effects of the sonication time and thermal energy on the crystal structure and magnetic properties of the obtained powders are presented. Strontium hexagonal ferrite (SrFe₁₂O₁₉) was successfully prepared by the ultrasonic cavitation (sonochemistry) of a complexed polyol solution of metallic acetates and diethylene glycol. The obtained materials were subsequently annealed at temperatures from 300 to 900 °C. X-ray diffraction analysis shows that the sonochemical process yields an amorphous phase containing Fe³⁺, Fe²⁺ and Sr²⁺ ions. This amorphous phase transforms into an intermediate phase of maghemite (γ-Fe₂O₃) at 300 °C. At 500 °C, the intermediate species is converted to hematite (α-Fe₂O₃) by a topotactic transition. The final product of strontium hexaferrite (SrFe₁₂O₁₉) is generated at 800 °C. The obtained strontium hexaferrite shows a magnetization of 62.3 emu/g, which is consistent with pure hexaferrite obtained by other methods, and a coercivity of 6.25 kOe, which is higher than expected for this hexaferrite. The powder morphology is composed of aggregates of rounded particles with an average particle size of 60 nm.     

Sonochemical synthesis of silver, copper and lead selenides

Ag₂Se, CuSe and PbSe were prepared by irradiating the mixtures of AgNO₃, CuI or PbCl₂ with selenium in ethylenediamine (en) with ultrasound at 18 kHz, using a commercial ultrasonic cleaner, respectively. X-ray powder diffraction (XRD) patterns and transmission electron microscope (TEM) images show that the products are orthorhombic Ag₂Se, hexagonal CuSe and cubic PbSe, respectively, and all are well crystallized in nanometers.     

Sonochemical synthesis and rheological properties of shear thickening silica dispersions

A sonochemical method has been developed to synthesize shear thickening fluid. This shear thickening fluid (STF) is composed of hard silicon dioxide nanoparticles and polyethylene glycol (PEG) liquid polymer. The combination of flow-able and hard components at a particular composition, results a material with remarkable rheological properties that is suitable for liquid body armor applications. In the present study nine types of STF’s have been synthesized with two different types of silica nanoparticles (15 nm and 200 nm) and polyethylene glycol at various weight fractions using a high intensity ultrasonic irradiation. The resultant STF samples were tested for their rheological and thermal properties. The advantages and disadvantages of this process have been discussed.     

Sonochemical synthesis of mesoporous transition metal and rare earth oxides

Straight-extended layered mesostructures based on transItion metal (Fe, Cr) and rare earth (Y, Ce, La, Sm, Er) oxides are synthesized by sonication for 3 h. After a longer period of sonication (6 h), hexagonal mesostructures based on Y- and Er-oxides are obtained. The surface areas of the Y-based hexagonal mesophases before and after extraction are 46.5, 256 m2/g, respectively. For Er-based hexagonal mesophases, the surface areas before and after extraction are 157 and 225 m2/g. The pore sizes after extraction are 5.0 and 2.2 nm for Y- and Er-based mesophases, respectively. Hexagonal mesostructures are also obtained for Zr-based material after sonication for 3 h and the hexagonal structure is still maintained after calcinations at 400 degrees C for 4 h, although the surface area is only 35 m2/g.     

Sonochemical synthesis of cobalt aluminate nanoparticles under various preparation parameters

Cobalt aluminate (CoAl₂O₄) nanoparticles were synthesized using a precursor method with the aid of ultrasound irradiation under various preparation parameters. The effects of the preparation parameters, such as the sonochemical reaction time and temperature, precipitation agents, calcination temperature and time on the formation of CoAl₂O₄ were investigated. The precursor on heating yields nanosized CoAl₂O₄ particles and both these nanoparticles and the precursor were characterized by means of X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and atomic force microscopy (AFM). The use of ultrasound irradiation during the homogeneous precipitation of the precursor reduces the duration of the precipitation reaction. The mechanism of the formation of cobalt aluminate was investigated by means of Fourier transformation infrared spectroscopy (FT-IR) and EDX (energy dispersive X-ray). The thermal decomposition process and kinetics of the precursor of nanosized CoAl₂O₄ were investigated by means of differential scanning calorimetry (DSC) and thermogravimetry (TG). The apparent activation energy (E) and the pre-exponential constant (A) were 304.26 kJ/mol and 6.441 × 10¹⁴ s^?1, respectively. Specific surface area was investigated by means of Brunauer Emmett Teller (BET) surface area measurements.     

Enzymatic synthesis of multi-component copolymers and their structural characterization

The use of enzymes in synthetic applications has increased dramatically in the recent years and the field of polymer science is part of this trend. Synthesis of a variety of polymers using lipase catalyzed (Candida antarctica) polymerization reactions has led to a variety of new materials with interesting properties in our laboratories. This paper describes the synthesis of multi-component polyesters and mixed polymers having polyester and polyamide linkages under solvent-less conditions using Candida antarctica lipase B. The effect of a third component, i.e. a series of 1,omega-alkanediols (1,4-butanediol, 1,6-hexanediol, 1,8-octanediol, 1,10-decanediol, 1,12-dodecanediol, 1,14-tetradecanediol and 1,16-hexadecanediol) on the copolymerization reaction of dimethyl 5-hydroxyisophthalate with poly(ethylene glycol 600) has been studied and the mechanism for the incorporation of the third component is proposed. We have also studied the effect of different functional groups during terpolymerization reaction of dimethyl 5-hydroxyisophthalate with poly(ethylene glycol) by adding a third component having different functionalities (1,6-hexanediol, 1,6-hexanediamine or 1,6-hexanedithiol) and compared the effect of hydroxyl, amine and thiol groups on the polymerization reactions.     

超声化学法制备纳米WO3掺杂聚苯乙烯及其表征

 为了满足惯性约束聚变和电磁内爆实验对靶材料的需求，以W(CO)_{5/sub>为原料，利用超声化学法在线制备纳米WO3/sub>掺杂聚苯乙烯。所得样品用TEM，XPS，FTIR和TG进行了表征。测试结果表明，钨元素主要以WO3/sub>的形态存在，WO3/sub>粒径分布为20~50 nm，WO3/sub>微粒被聚苯乙烯完全包覆，掺杂后聚苯乙烯的热稳定性提高了70 ℃。在此基础上，对超声化学法的反应机理进行了探讨。研究表明：纳米WO3/sub>与聚苯乙烯分子链有一定的化学键结合，纳米WO3/sub>在聚苯乙烯基体中分布均匀。}     

Sonochemical synthesis of carbon supported Sn nanoparticles and its electrochemical application

A sonochemical approach was employed to prepare Vulcan carbon XC-72R supported by Sn nanoparticles at room temperature in the presence of ethylene glycol. The reduction of metallic Sn ion and ethylene glycol takes place and in turn the glycolate ion as formed acts as a stabilizing agent. Transmission electron microscope, X-ray diffraction, and X-ray photoelectron spectroscopy have illustrated that the metallic Sn nanoparticles are successfully embedded on the carbon. The significantly observed reduction over potential for oxygen reduction reaction displays a higher catalytic activity of carbon supported by Sn nanoparticles due to the large surface area of the modified electrode.     

超声化学法制备纳米WO3掺杂聚苯乙烯及其表征

为了满足惯性约束聚变和电磁内爆实验对靶材料的需求,以W(CO)5/sub>为原料,利用超声化学法在线制备纳米WO3/sub>掺杂聚苯乙烯。所得样品用TEM,XPS,FTIR和TG进行了表征。测试结果表明,钨元素主要以WO3/sub>的形态存在,WO3/sub>粒径分布为20~50 nm,WO3/sub>微粒被聚苯乙烯完全包覆,掺杂后聚苯乙烯的热稳定性提高了70 ℃。在此基础上,对超声化学法的反应机理进行了探讨。研究表明：纳米WO3/sub>与聚苯乙烯分子链有一定的化学键结合,纳米WO3/sub>在聚苯乙烯基体中分布均匀。     

Sonochemical synthesis of Cu2O nanocubes for enhanced chemiluminescence applications

A facile one-step sonochemical synthesis of Cu₂O nanocubes has been developed by ultrasound irradiation of copper sulfate in the presence of polyvinylpyrrolidone and ascorbic acid at pH 11. During sonication, the reaction between acoustic cavitation-generated radicals and CuSO₄ produced Cu(OH)₂ intermediate which then reacted with ascorbic acid to generate Cu₂O nanocubes. The products were characterized by FT-IR, XRD, HRTEM, AFM and particle size analyzer. The prepared Cu₂O nanocubes were found to be very effective for enhancing chemiluminescence in the presence of luminol–H₂O₂ system.     

Sonochemical synthesis and characterization of lead iodide hydroxide micro/nanostructures

For the first time, micro/nano-sized lead iodide hydroxide; Pb(OH)I, has been successfully prepared via a simple ultrasonic method. In this method, lead nitrate and lithium iodide were applied as starting reagents to fabricate Pb(OH)I micro/nanostructures at different conditions. The effect of different surfactants like N,N-bis(salicylidene)-ethylenediamine (H₂salen), sodium dodecyl sulfate (SDS) and polyvinylpyrrolidone (PVP), sonication time, and ultrasonic intensity on the morphology and particle size of the products has been investigated. The as-produced micro/nanostructures were characterized with the aid of XRD, SEM, TEM, UV–vis, EDS and FT-IR. According to the SEM images, different morphologies of Pb(OH)I including micro- and nano-sized rods were formed by changing the preparation conditions. Based on the XRD results, it was found that Pb(OH)I and PbI₂ have been produced with and without sonication at the same conditions, respectively. The use of the H₂salen and sonication treatment were confirmed to be the crucial factors determining the formation of one-dimensional Pb(OH)I micro/nanostructures.