闪锌矿ZnTe高温高压下的弹性及热力学性质

利用第一性原理平面波赝势密度泛函理论并结合准谐德拜模型计算了闪锌矿结构ZnTe在高温高压下的弹性及热力学性质.得到了绝对零度、零压强时的晶格常数为0.6095 nm,仅比实验值(0.6103 nm)小0.1%.计算的体弹模量及弹性常数也与实验值符合较好.根据计算的高压下的弹性常数,得到其相变点约为10 GPa,与已知的实验值一致.通过准谐德拜模型,得到了常温下(T=300 K)的德拜温度为249 K,并得到了不同温度、不同压强下的热容.热容随着压强增加而减小,在高温、高压下,热容接近于Dulong-Petit极限.     

EuS高压相变发其弹性和热力学性质

采用平面波赝势密度泛函理论,利用第一性原理的方法研究了EuS的晶体结构、高压相变以及弹性性质．计算结果和实验值以及前人利用不同计算模型得到的理论值相吻合．研究了EuS的弹性常数、弹性模量和弹性的各向异性等力学性质随压力变化的趋势．同时研究了泊松比、德拜温度及纵波和横波的弹性波速随压力的变化趋势．基于德拜模型,进而研究了EuS在0-800K和0-60GPa下相变前后的热膨胀系数、热熔、Gruneisen参数等热力学性质．     

Structural, electronic, bonding, and elastic properties of NH3BH3: a density functional study

The structural, electronic, bonding, and elastic properties of the low-temperature orthorhombic phase of NH(3)BH(3) are studied by means of first-principles total energy calculations based on the pseudopotential method. The calculated structural parameters of NH(3)BH(3) are found to be in good agreement with the experimental values. From the band structure calculations, the compound is found to be an indirect bandgap insulator with the bandgap of 5.65 eV (5.90 eV) with LDA(GGA) along the Γ-Z direction. The Mulliken bond population and the charge density distributions are used to analyze the chemical bonding in NH(3)BH(3) . The study reveals that B-H bonds are more covalent than N-H bonds. The elastic constants are predicted for ambient as well as pressures up to 6 GPa, from which theoretical values of all the related mechanical properties such as bulk modulus, shear modulus, Young's modulus, Poisson's ratio, and anisotropy factors are calculated. It is found that NH(3)BH(3) is mechanically stable at ambient and also external pressures up to 6 GPa. As pressure increases all the calculated elastic moduli of NH(3)BH(3) increase, indicating that the compound becomes more stiffer and hard under pressure. From the ratio of shear modulus to bulk modulus (G/B), we conclude NH(3)BH(3) to be ductile in nature, and the ductility increases with pressure. The present results confirm the experimentally observed less plastic nature of the low-temperature phase of NH(3)BH(3) .     

Structural,elastic, electronic and optical properties of the cubic perovskite BiAlO3

We report first-principles study of structural, elastic, electronic and optical properties of the cubic perovskite-type BiAlO₃ using the pseudopotential plane waves method within the local density approximation. The calculated structural parameters are in good agreement with previous calculations. The elastic constants and their pressure dependence are calculated using the static finite strain technique. A linear pressure dependence of the elastic stiffness is found. Band structures show that BiAlO₃ has an indirect band gap between the occupied O 2p and unoccupied Bi 6p states. The density of states and Mulliken charge populations analysis shows that Al–O and Bi–O bonds are covalent with a strong hybridization. The variation of the gap versus pressure is well fitted to a quadratic function and an indirect to direct band gap transition occurs at 15.5 GPa. Furthermore, in order to understand the optical properties of BiAlO₃, the dielectric function, absorption coefficient, refractive index, extinction coefficient, optical reflectivity and electron energy loss are calculated for radiation up to 30 eV.     

Structural, electronic, and optical properties of crystalline iodoform under high pressure: a first-principles study

The high pressure phases, electronic structure, and optical properties of iodoform at zero temperature have been investigated by first-principles pseudopotential plane-wave calculations based on the density-functional theory. A new high pressure polar monoclinic structure with space group Cc, denoted as β phase, has been observed after a series of simulated annealing and geometry optimizations. Our calculated enthalpies showed that the transition from α to β phase occurs at 40.1 GPa. Electronic structure calculated results showed that the insulator-metal transition in α phase due to band overlap is found at about 32 GPa. In addition, the calculated absorption spectra of iodoform are consistent with the experimental results.     

Structural,elastic, electronic and optical properties of the newly synthesized monoclinic Zintl phase BaIn2P2

The present study explores the structural, elastic, electronic and optical properties of the newly synthesized monoclinic Zintl phase BaIn₂P₂ using a pseudopotential plane-wave method in the framework of density functional theory within the generalized gradient approximation. The calculated lattice constants and internal coordinates are in very good agreement with the experimental findings. Independent single-crystal elastic constants as well as numerical estimations of the bulk modulus, the shear modulus, Young's modulus, Poisson's ratio, Pugh's indicator of brittle/ductile behaviour and the Debye temperature for the corresponding polycrystalline phase were obtained. The elastic anisotropy of BaIn₂P₂ was investigated using three different indexes. The calculated electronic band structure and the total and site-projected l-decomposed densities of states reveal that this compound is a direct narrow-band-gap semiconductor. Under the influence of hydrostatic pressure, the direct D–D band gap transforms into an indirect B-D band gap at 4.08 GPa, then into a B–Γ band gap at 10.56 GPa. Optical macroscopic constants, namely, the dielectric function, refractive index, extinction coefficient, reflectivity coefficient, absorption coefficient and energy-loss function, for polarized incident radiation along the [100], [010] and [001] directions were investigated.     

Structural, elastic constant, and vibrational properties of wurtzite gallium nitride: a first-principles approach

Perdew-Wang proposed generalized gradient approximation (GGA) is used in conjunction with ultrasoft pseudopotential to investigate the structural, elastic constant, and vibrational properties of wurtzite GaN. The equilibrium lattice parameters, axial ratio, internal parameter, bulk modulus, and its pressure derivative are calculated. The effect of pressure on equilibrium lattice parameters, axial ratio, internal parameter (u), relative volume, and bond lengths parallel and perpendicular to the c-axis are discussed. At 52 GPa, the relative volume change is observed to be 17.8%, with an abrupt change in bond length. The calculated elastic constants are used to calculate the shear wave speeds in the [100] and [001] planes. The finite displacement method is employed to calculate phonon frequencies and the phonon density of states. The first- and second-order pressure derivative and volume dependent Gruneisen parameter (γ(j)) of zone-center phonon frequencies are discussed. These phonon calculations calculated at theoretical lattice constants agree well with existing literature.     

First-principles investigations on structural,electronic and elastic properties of BeSe under high pressure

The structural, electronic and elastic properties of BeSe in both B3 and B8 structures have been studied by first-principles calculations within the generalized gradient approximation (GGA). The calculated lattice parameters and bulk modulus of BeSe are in reasonable agreement with previous results. The predicted value of phase transition pressure from B3 to B8 is 50.24 GPa, which is well in line with the experimental data (56 ± 5 GPa). The calculation of the electronic band structure shows that the energy gap is indirect for B3 and B8 phases. Especially, the elastic constants of B8 BeSe under high pressure were studied for the first time. The bulk modulus, shear modulus, compressional and shear wave velocities of B8 BeSe evaluated from elastic constants as a function of pressure were investigated. In addition, Poisson's radio, elastic anisotropy and Debye temperature were analyzed successfully.     

Ab initio and molecular dynamics studies of crystalline TNAD (trans-1,4,5,8-tetranitro-1,4,5,8-tetraazadecalin)

The structural and electronic properties of the energetic crystal TNAD (trans-1,4,5,8-tetranitro-1,4,5,8- tetraazadecalin) have been studied using plane-wave ab initio calculations based on the density function theory method with the ultrasoft pseudopotentials. It is found that the predicted crystal structure is in good agreement with experimental data and there are strong inter- and intramolecular interactions in bulk TNAD. Band structure calculations indicate that TNAD is an insulator with the band gap of ca. 3.3 eV. The hydrostatic compression effect on TNAD has been studied in the pressure range of 0-600 GPa. The results show that a pressure less than 10 GPa does not significantly change the geometric parameters, charge distributions, and electronic bands. When the pressure is over 10 GPa, increasing the pressure determines significant changes of the geometrical and electronic structures and large broadening of the electronic bands together with a sharp decrease of the band gap. Isothermal-isobaric molecular dynamics simulations at atmospheric pressure were further performed on the TNAD crystal in the temperature range 5-500 K. Average equilibrium lattice parameters and elastic properties as functions of temperature were determined. The thermal expansion coefficients calculated for the crystal indicate anisotropic behavior with the largest expansion along the b axis.     

First-principle electronic, elastic, and optical study of cubic gallium nitride

The ab initio pseudopotential (PP) method within the generalized gradient approximation (GGA) has been used to investigate the electronic, elastic constants, and optical properties of zinc-blende GaN. An underestimated band gap along with higher DOS and squeezed energy bands around the fermi level is obtained. The d-band effect is briefly discussed for electronic band structure calculations. With the help of elastic constants, acoustic wave speeds are calculated in [100], [110], and [111] planes. The dielectric constant, refractive index, and its pressure coefficient are well illustrated. The effect of hydrostatic pressure is explicated for all these properties. The results of the present study are evaluated with the existing experimental and first-principle calculations.     

The disproportionation reaction phase transition,mechanical, and lattice dynamical properties of the lanthanum dihydrides under high pressure: A first principles study

The pressure-induced disproportionation reaction phase transition, mechanical, and dynamical properties of LaH₂ with fluorite structure under high pressure are investigated by performing first-principles calculations using the projector augmented wave (PAW) method. The phase transition of 2LaH₂ → LaH + LaH₃ obtained from the usual condition of equal enthalpies occurs at the pressure of 10.38 GPa for Perdew–Wang (PW91) functional and 6.05 GPa for Ceperly–Adler (CA) functional, respectively. The result shows that the PW91 functional calculations agree excellently with the experimental finding of 11 GPa of synchrotron radiation (SR) X-ray diffraction (XRD) of Machida et al. and 10 GPa of their PBE functional theoretical result. Three independent single-crystal elastic constants, polycrystalline bulk modulus, shear modulus, Young's modulus, elastic anisotropy, Poisson's ratio, the brittle/ductile characteristics and elastic wave velocities over different directions dependences on pressure are also successfully obtained. Especially, the phonon dispersion curves and corresponding phonon density of states of LaH₂ under high pressure are determined systematically using a linear-response approach to density functional perturbation theory (DFPT). Our results demonstrate that LaH₂ in fluorite phase can be stable energetically up to 10.38 GPa, stabilized mechanically up to 17.98 GPa, and stabilized dynamically up to 29 GPa, so it may remain a metastable phase above 10.38 GPa up to 29 GPa, these calculated results accord with the recent X-Ray diffraction experimental finding and theoretical predictions of Machida et al.     

First principles study of structural,electronic, elastic and thermal properties of YX (X = Cd,In, Au,Hg and Tl) intermetallics

The structural, electronic, elastic and thermal properties of YX (X = Cd, In, Au, Hg and Tl) intermetallic compounds crystallizing in B₂-type structure have been studied using first principles density functional theory within generalized gradient approximation (GGA) for the exchange correlation potential. Amongst all the YX compounds, YIn is stable in distorted tetragonal (P4/mmm) CuAu-type structure at ambient pressure with very small energy difference of 0.00681 Ry. but it undergoes to CsCl-type (B₂ phase) structure at 23.3 GPa. Rest of the compounds are stable in B₂ structure at ambient condition. The values of elastic moduli as a function of pressure are also reported. The ductility of these compounds has been analyzed using the Pugh rule. Our calculated results indicate that YTl is the most ductile amongst all the B₂-YX compounds. YAu is the hardest and less compressible compound due to the largest bulk modulus. The elastic properties such as Young's modulus (E), Poisson's ratio (σ) and anisotropic ratio (A) are also predicted. The anisotropic factor is found to be unity for YHg which shows that this compound is isotropic.     

The high-pressure phase transition of TiS2 from first-principles calculations

The structural stability of TiS₂ under high pressures has been investigated by using first-principles plane-wave pseudopotential density functional theory within the local density approximation (LDA). The obtained results predict that TiS₂ undergoes a pressure-induced first-order phase transition from its trigonal 1T-type structure to orthorhombic cotunnite-type structure at 16.20 GPa. The calculated transition pressure agrees quite well with the experimental finding of 20.7 GPa. The equation of state determined from our calculated results yields bulk moduli of 58.91 and 118.10 GPa for the 1T-type and cotunnite-type phases, respectively. This indicates higher incompressibility of the high-pressure phase of TiS₂. In addition, the electronic structures of the two phases of TiS₂ are also calculated and discussed. The results suggest the structural phase transition of TiS₂ at high pressure is followed by a semimetal to metal electronic transition.     

High-pressure study of lithium azide from density-functional calculations

The structural, electronic, optical, and vibrational properties of LiN(3) under high pressure have been studied using plane wave pseudopotentials within the generalized gradient approximation for the exchange and correlation functional. The calculated lattice parameters agree quite well with experiments. The calculated bulk modulus value is found to be 23.23 GPa, which is in good agreement with the experimental value of 20.5 GPa. Our calculations reproduce well the trends in high-pressure behavior of the structural parameters. The present results show that the compressibility of LiN(3) crystal is anisotropic and the crystallographic b-axis is more compressible when compared to a- and c-axes, which is also consistent with experiment. Elastic constants are predicted, which still awaits experimental confirmation. The computed elastic constants clearly show that LiN(3) is a mechanically stable system and the calculated elastic constants follow the order C(33) > C(11) > C(22), implying that the LiN(3) lattice is stiffer along the c-axis and relatively weaker along the b-axis. Under the application of pressure the magnitude of the electronic band gap value decreases, indicating that the system has the tendency to become semiconductor at high pressures. The optical properties such as refractive index, absorption spectra, and photoconductivity along the three crystallographic directions have been calculated at ambient as well as at high pressures. The calculated refractive index shows that the system is optically anisotropic and the anisotropy increases with an increase in pressure. The observed peaks in the absorption and photoconductivity spectra are found to shift toward the higher energy region as pressure increases, which implies that in LiN(3) decomposition is favored under pressure with the action of light. The vibrational frequencies for the internal and lattice modes of LiN(3) at ambient conditions as well as at high pressures are calculated from which we predict that the response of the lattice modes toward pressure is relatively high when compared to the internal modes of the azide ion.     

First Principles Investigation of Electronic Property and High Pressure Phase Stability of SmN

An investigation of electronic property and high pressure phase stability of SmN has been conducted using first principles calculations based on density functional theory. The electronic properties of SmN show a striking feature of a half metal, the majority-spin electrons are metallic and the minority-spin electrons are semiconducting. It was found that SmN undergoes a pressure-induced phase transition from NaCl-type (B1) to CsCl-type structure (B2) at 117 GPa. The elastic constants of SmN satisfy Born conditions at ambient pressure, indicating that B1 phase of SmN is mechanically stable at 0 GPa. The result of phonon spectra shows that B1 structure is dynamically stable at ambient pressure, which agrees with the conclusion derived from the elastic constants.     

Pressure-induced metallization in the absence of a structural transition in the layered transition-metal dichalcogenide ZrSe2

First-principles calculations were carried out on the ZrSe₂ compound, which has been of interest owing to its technologically important physical properties. The structural, electronic and optical properties of this compound were investigated under pressure through the plane wave pseudopotential approach within the framework of density functional theory. A comparison between the computed crystal structure parameters and the corresponding experimental counterparts shows a very good agreement between them. Fitting the pressure–volume data using the third-order Birch–Murnaghan equation of state yielded a bulk modulus B₀ = 38.17 GPa and a pressure derivative of bulk modulus  = 8.2 for hexagonal ZrSe₂. The relationship between the band structure and pressure is revealed. We calculated the total density of state (TDOS) under different pressures and partial density of state (PDOS) from 0 to 10 GPa. According to our calculations, metallization of hexagonal ZrSe₂ is predicted to occur at around 10 GPa and pressure-induced band-gap engineering reveals the transformation of the indirect to direct band gap with increasing pressure. Furthermore, optical properties, such as the complex dielectric function, refractive index and reflectivity spectra of this compound, were studied for incident electromagnetic waves in an energy range up to 45 eV. The contributions to various transition peaks in the optical spectra are analyzed and discussed with the help of the energy-dependent imaginary part of the dielectric function.     

正磷酸铝高压下相变的分子动力学模拟

在300K、-20GPa至40GPa范围内,对正磷酸铝系统进行了定温定压分子动力学模拟.随着压力不断增加,正磷酸铝中的磷氧四面体基本不变,只是各向同性稍有压缩 ;铝氧四面体变得越来越畸变,但铝对氧的配位数仍保持4.所计算的晶胞压缩率与现有实验数据符合良好,晶格常数a比c减少得更厉害.在 20GPa处发生了一级相变,对径向分布函数分析的结果表明,这主要是铝氧四面体中氧 氧位置发生滑移的结果.从高压下回到零压,模拟表明又回复到原来的晶体结构.在 -15GPa下,晶体结构崩溃.对所得结果进行了讨论.     

高压下MgO熔化特性的分子动力学模拟

Molecular dynamics simulation was used to study the melting of MgO at high pressures. The melting temperature of MgO was accurately obtained at elevated temperature and high pressure after corrections based on the modern theory of melting. The calculated melting curve was compared with the available experimental data and other theoretical results at the pressure range of 0-135 GPa. The corrected melting temperature of MgO is in good agreement with the results from Lindemann melting equation and the twophase simulated results below 15 GPa.     

Ground-state and lattice dynamical properties of BeS in the zinc-blende and nickel arsenide phases

Structural, elastic and dynamical properties of the zinc-blende and nickel arsenide structures of BeS have been studied by employing an ab initio pseudopotential method and a linear response approach, within the local density approximation. Our results compare quite well with the available experimental data. To the best of our knowledge, the elastic and lattice dynamical properties for BeS in the nickel arsenide phase are reported in the present study for the first time. Differences in the phonon spectra and density of states both in the acoustic and optical ranges between the two phases of interest are investigated. The linear and quadratic pressure coefficients of phonon frequencies at the center of the Brillouin zone are determined from the pressure dependence of vibration modes.