Mechanistic and kinetic study of the CH3CO + O2 reaction

Potential-energy surface of the CH3CO + O2 reaction has been calculated by ab initio quantum chemistry methods. The geometries were optimized using the second-order Moller-Plesset theory (MP2) with the 6-311G(d,p) basis set and the coupled-cluster theory with single and double excitations (CCSD) with the correlation consistent polarized valence double zeta (cc-pVDZ) basis set. The relative energies were calculated using the Gaussian-3 second-order Moller-Plesset theory with the CCSD/cc-pVDZ geometries. Multireference self-consistent-field and MP2 methods were also employed using the 6-311G(d,p) and 6-311++G(3df,2p) basis sets. Both addition/elimination and direct abstraction mechanisms have been investigated. It was revealed that acetylperoxy radical [CH3C(O)OO] is the initial adduct and the formation of OH and alpha-lactone [CH2CO2(1A')] is the only energetically accessible decomposition channel. The other channels, e.g., abstraction, HO2 + CH2CO, O + CH3CO2, CO + CH3O2, and CO2 + CH3O, are negligible. Multichannel Rice-Ramsperger-Kassel-Marcus theory and transition state theory (E-resolved) were employed to calculate the overall and individual rate coefficients and the temperature and pressure dependences. Fairly good agreement between theory and experiments has been obtained without any adjustable parameters. It was concluded that at pressures below 3 Torr, OH and CH2CO2(1A') are the major nascent products of the oxidation of acetyl radicals, although CH2CO2(1A') might either undergo unimolecular decomposition to form the final products of CH2O + CO or react with OH and Cl to generate H2O and HCl. The acetylperoxy radicals formed by collisional stabilization are the major products at the elevated pressures. In atmosphere, the yield of acetylperoxy is nearly unity and the contribution of OH is only marginal.     

Reactions of superoxo and oxo metal complexes with aldehydes. Radical-specific pathways for cross-disproportionation of superoxometal ions and acylperoxyl radicals

The aquachromyl(IV) ion, Cr(aq)O(2+), reacts with acetaldehyde and pivaldehyde by hydrogen atom abstraction and, in the presence of O(2), produces acylperoxyl radicals, RC(O)OO(*). In the next step, the radicals react with Cr(aq)OO(2+), a species accompanying Cr(aq)O(2+) in our preparations. The rate constant for the Cr(aq)OO(2+)/CH(3)C(O)OO(*) cross reaction, k(Cr) = 1.5 x 10(8) M(-1) s(-1), was determined by laser flash photolysis. The evidence points to radical coupling at the remote oxygen of Cr(aq)OO(2+), followed by elimination of O(2) and formation of CH(3)COOH and Cr(V)(aq)O(3+). The latter disproportionates and ultimately yields Cr(aq)(3+) and HCrO(4)(-). No CO(2) was detected. The Cr(aq)OO(2+)/C(CH(3))(3)C(O)OO(*) reaction yielded isobutene, CO(2), and Cr(aq)(3+), in addition to chromate. In the suggested mechanism, the transient Cr(aq)OOOO(O)CC(CH(3))(3)(2+) branches into two sets of products. The path leading to chromate resembles the CH(3)C(O)OO(*) reaction. The other products arise from an unprecedented intramolecular hydrogen transfer from the tert-butyl group to the CrO entity and elimination of CO(2) and O(2). A portion of C(CH(3))(3)C(O)OO(*) was captured by (CH(3))(3)COO(*), which was in turn generated by decarbonylation of acyl radicals and oxygenation of tert-butyl radicals so formed.     

The atmospheric oxidation of diethyl ether: chemistry of the C2H5-O-CH(O.)CH3 radical between 218 and 335 K

The products of the Cl atom initiated oxidation of diethyl ether (DEE) were investigated at atmospheric pressure over a range of temperatures (218-335 K) and O(2) partial pressures (50-700 Torr), both in the presence and absence of NO(x). The major products observed at 298 K and below were ethyl formate and ethyl acetate, which accounted for approximately equal to 60-80% of the reacted diethyl ether. In general, the yield of ethyl formate increased with increasing temperature, with decreasing O(2) partial pressure, and upon addition of NO to the reaction mixtures. The product yield data show that thermal decomposition reaction 3, CH(3)CH(2)-O-CH(O.)CH(3)--> CH(3)CH(2)-O-CH=O + CH(3), and reaction 6 with O(2), CH(3)CH(2)-O-CH(O.)CH(3) + O(2)--> CH(3)CH(2)-O-C(=O)CH(3) + HO(2) are competing fates of the CH(3)CH(2)-O-CH(O )CH(3) radical, with a best estimate of k3/k6 approximately equal to 6.9 x 10(24) exp(-3130/T). Thermal decomposition via C-H or C-O bond cleavage are at most minor contributors to the CH(3)CH(2)-O-CH(O.)CH(3) chemistry. The data also show that the CH(3)CH(2)-O-CH(O.)CH(3) radical is subject to a chemical activation effect. When produced from the exothermic reaction of the CH(3)CH(2)-O-CH(OO.)CH(3) radical with NO, prompt decomposition via both CH(3)- and probably H-elimination occur, with yields of about 40% and < or =15%, respectively. Finally, at temperatures slightly above ambient, evidence for a change in mechanism in the absence of NO(x), possibly due to chemistry involving the peroxy radical CH(3)CH(2)-O-CH(OO.)CH(3), is presented.     

Computational study of the reaction of chlorinated vinyl radical with molecular oxygen (C2Cl3 + O2)

Eight exothermic product channels of the reaction of chlorinated vinyl radical (C2Cl3) with molecular oxygen (O2) have been investigated using ab initio quantum chemistry methods. The energetics of the reaction pathways were calculated at the second-order Moller-Plesset Gaussian-3 level of theory (G3MP2) using the B3LYP/6-311G(d) optimized geometries. It has been shown that the C2Cl3 + O2 reaction takes place via a barrierless addition to form the chlorinated vinylperoxy radical complex, which can decompose or isomerize to various products via the complicated mechanisms. Two major reaction routes were revealed, i.e., the three-member-ring reaction mechanism leading to ClCO + CCl2O, CO + CCl3O, CO2 + CCl3, Cl + (ClCO)2, etc., and the OO bond cleavage mechanism leading to O(3P) + C2Cl3O. The other mechanisms are shown to be unimportant. The results are validated by the calculations using the restricted coupled cluster theory [RCCSD(T)] with the complete basis set extrapolation. Variational transition state theory was employed to calculate the individual and total rate coefficients as a function of temperature and pressure (helium). The theoretical rate coefficients are in good agreement with the available experimental data. It was found that the total rate coefficients show strong negative temperature dependence in the range 200-2000 K. At room temperature (297 K), the total rate coefficients are shown to be nearly pressure independent over a wide range of helium pressures (1-10(9) Torr). The deactivation of the initial adduct, C2Cl3O2, is only significant at pressures higher than 1000 Torr. The three-member-ring reaction mechanism is always predominant over the OO bond cleavage.     

Multichannel reaction of C2Cl3 + O2 studied by time-resolved Fourier transform infrared emission spectroscopy

The multichannel reaction of the C(2)Cl(3) radical with O(2) has been studied thoroughly by step-scan time-resolved Fourier transform infrared emission spectroscopy. Vibrationally excited products of Cl(2)CO, CO, and CO(2) are observed and three major reaction channels forming respectively ClCO + Cl(2)CO, CO + CCl(3)O, and CO(2) + CCl(3) are identified. The vibrational state distribution of the product CO is derived from the spectral fitting, and the nascent average vibrational energy of CO is determined to be 59.9 kJ/mol. A surprisal analysis is applied to evaluate the vibrational energy disposal, which reveals that the experimentally measured CO vibrational energy is much more than that predicted by statistical model. Combining previous ab initio calculation results, the nonstatistical dynamics and mechanism are characterized to be barrierless addition-elimination via short-lived reaction intermediates including the peroxy intermediate C(2)Cl(3)OO* and a crucial three-member-ring COO intermediate.     

Criegee中间体气相反应热力学的G2理论计算

Criegee intermediate is believed to play an important role in the atmospheric chemistry. Because of its short life and the difficulty in experimental study, we carried out ah initio calculations on the thermochemistry of the Criegee involving reactions in this study. Thermochemistry data of reaction enthalpies and Gibbs free energies for four different stable structures of the Criegee intermediates (singlet CH2OO ①1 A1 in C2v, triplet CH2OO ②3B1 in C2v, singlet CH2OO ③1A' in Cs and triplet CH2OO ④ in C1 symmetry) involved in some of the gas-phase reactions were calculated at the standard Gaussian-2 [G2(MP2) and G2] and a modified G2, G2(fu1)[10],levels of theory. Relative energies among those Criegees and formic acid were compared. Chemical reactions include the formation of Criegees, re-arrangement from Criegee to formic acid, dissociations (producing CH2(3B1)+O2, CH2(1A1)+O2, CO2+H2, CO2+2H, CO+H2O, OH+HCO) and the reactions between Criegee and NO/H2O. Standard equilibrium constants for some reactions were investigated and may be obtained for all of the rest reactions involved in this study by the standard Gibbs free energies. It is shown that the formation of Criegee ①-④ by ethylene and ozone, the re-arrangement from any Criegee to formic acid, the dissociation in producing CO2+O2and CO+H2O and the reactions between any Criegee and NO/H2O are all favourable thermodynamicaly. The dissociation in forming CO2+2H and OH+HCO is less favourable. While the dissociation in forming carbene (either in 3B1 or 1A1 state) is not allowed by ΔrGm? values. Standard enthalpies of formation at 298 K for the four Criegees were predicted at the G2(ful) level of theory. Each value is the average value from ten of the above reactions and they are -4.3, 74.8,98.9 and 244.6 kJ mol-1 at the G2(ful) level for Criegee ① to Criegee ④, respectively. In addition, tile standard enthalpy of formation at 298 K for HOCH2OOH is further predicted to be -315.6 kJ mol-1 at the G2(MP2) level.     

Products of the gas-phase reactions of OH radicals with (C2H5O)2P(S)CH3 and (C2H5O)3PS

Products of the gas-phase reactions of OH radicals with O,O-diethyl methylphosphonothioate [(C2H5O)2P(S)CH3, DEMPT] and O,O,O-triethyl phosphorothioate [(C2H5O)3PS, TEPT] have been investigated at room temperature and atmospheric pressure of air using in situ atmospheric pressure ionization mass spectrometry (API-MS) and, for the TEPT reaction, gas chromatography and in situ Fourier transform infrared (FT-IR) spectroscopy. Combined with products quantified previously by gas chromatography, the products observed were: from the DEMPT reaction, (C2H5O)2P(O)CH3 (21+/-4% yield) and C2H5OP(S)(CH3)OH or C2H5OP(O)(CH3)SH (presumed to be C2H5OP(O)(CH3)SH by analogy with the TEPT reaction); and from the TEPT reaction, (C2H5O)3PO (54-62% yield), SO2 (67+/-10% yield), CH3CHO (22-40% yield) and, tentatively, (C2H5O)2P(O)SH. The FT-IR analyses showed that the formation yields of HCHO, CO, CO2, peroxyacetyl nitrate [CH3C(O)OONO2], organic nitrates, and acetates from the TEPT reaction were <5%, 3+/-1%, <7%, <2%, 5+/-3%, and 3+/-2%, respectively. Possible reaction mechanisms are discussed.     

Reaction of Cl atoms with C6F13CH2OH, C6F13CHO, and C3F7CHO

The Cl atom initiated oxidation of C(6)F(13)CH(2)OH, C(6)F(13)CHO, and C(3)F(7)CHO was investigated at 298 K and 1000 mbar pressure of air in a photoreactor using in situ Fourier transform infrared (FTIR) analysis. The rate coefficient for the reaction Cl + C(6)F(13)CH(2)OH (reaction 2) was measured using a relative method: k(2) = (6.5 +/- 0.8) x 10(-13) cm(3) molecule(-1) s(-1). C(6)F(13)CHO was detected as the major primary product, while CO and CF(2)O were found to be the major secondary products. A fitting procedure applied to the concentration-time profiles of C(6)F(13)CHO provided a production yield of (1.0 +/- 0.2) for this aldehyde in reaction 2, and the rate coefficient for the reaction Cl + C(6)F(13)CHO (reaction 4) was k(4) = (2.8 +/- 0.7) x 10(-12) cm(3) molecule(-1) s(-1). A high CO yield observed in the oxidation of C(6)F(13)CH(2)OH, (52 +/- 1)%, is attributed to the Cl atom initiated oxidation of C(6)F(13)CHO. High CO yields, (61 +/- 2)% and (85 +/- 5)%, were also measured in the Cl atom initiated oxidation of C(3)F(7)CHO in air and nitrogen, respectively. These high CO yields suggest the occurrence of a decomposition reaction of the perfluoroacyl, C(6)F(13)CO, and C(3)F(7)CO radicals to form CO which will compete with the combination reaction of these radicals with oxygen to form perfluoroacyl peroxy radicals in the presence of air. The latter radicals C(n)F(2)(n)(+1)CO(O)(2) (n = 6-12), through their reaction with HO(2) radicals, are currently considered as a possible source of persistent perfluorocarboxylic acids which have been detected in the environment. The consequences of the present results would be a reduction of the strength of this potential source of carboxylic acids in the atmosphere.     

Analyzing velocity map images to distinguish the primary methyl photofragments from those produced upon C-Cl bond photofission in chloroacetone at 193 nm

We use a combination of crossed laser-molecular beam scattering experiments and velocity map imaging experiments to investigate the three primary photodissociation channels of chloroacetone at 193 nm: C-Cl bond photofission yielding CH(3)C(O)CH(2) radicals, C-C bond photofission yielding CH(3)CO and CH(2)Cl products, and C-CH(3) bond photofission resulting in CH(3) and C(O)CH(2)Cl products. Improved analysis of data previously reported by our group quantitatively identifies the contribution of this latter photodissociation channel. We introduce a forward convolution procedure to identify the portion of the signal, derived from the methyl image, which results from a two-step process in which C-Cl bond photofission is followed by the dissociation of the vibrationally excited CH(3)C(O)CH(2) radicals to CH(3) + COCH(2). Subtracting this from the total methyl signal identifies the methyl photofragments that result from the CH(3) + C(O)CH(2)Cl photofission channel. We find that about 89% of the chloroacetone molecules undergo C-Cl bond photofission to yield CH(3)C(O)CH(2) and Cl products; approximately 8% result in C-C bond photofission to yield CH(3)CO and CH(2)Cl products, and the remaining 2.6% undergo C-CH(3) bond photofission to yield CH(3) and C(O)CH(2)Cl products.     

Atmospheric chemistry of CH3CHF2 (HFC-152a): kinetics, mechanisms, and products of Cl atom- and OH radical-initiated oxidation in the presence and absence of NO(x)

Smog chamber/Fourier transform infrared (FTIR) and laser-induced fluorescence (LIF) spectroscopic techniques were used to study the atmospheric degradation of CH3CHF2. The kinetics and products of the Cl(2P(3/2)) (denoted Cl) atom- and the OH radical-initiated oxidation of CH3CHF2 in 700 Torr of air or N2; diluents at 295 +/- 2 K were studied using smog chamber/FTIR techniques. Relative rate methods were used to measure k(Cl + CH3CHF2) = (2.37 +/- 0.31) x 10(-13) and k(OH + CH3CHF2) = (3.08 +/- 0.62) x 10(-14) cm3 molecule(-1) s(-1). Reaction with Cl atoms gives CH3CF2 radicals in a yield of 99.2 +/- 0.1% and CH2CHF2 radicals in a yield of 0.8 +/- 0.1%. Reaction with OH radicals gives CH3CF2 radicals in a yield >75% and CH2CHF2 radicals in a yield <25%. Absolute rate data for the Cl reaction were measured using quantum-state selective LIF detection of Cl(2P(j)) atoms under pseudo-first-order conditions. The rate constant k(Cl + CH3CHF2) was determined to be (2.54 +/- 0.25) x 10(-13) cm3 molecule(-1) s(-1) by the LIF technique, in good agreement with the relative rate results. The removal rate of spin-orbit excited-state Cl(2P(1/2)) (denoted Cl) in collisions with CH3CHF2 was determined to be k(Cl + CH3CHF2) = (2.21 +/- 0.22) x 10(-10) cm3 molecule(-1) s(-1). The atmospheric photooxidation products were examined in the presence and absence of NO(x). In the absence of NO(x)(), the Cl atom-initiated oxidation of CH3CHF2 in air leads to formation of COF2 in a molar yield of 97 +/- 5%. In the presence of NO(x), the observed oxidation products include COF2 and CH3COF. As [NO] increases, the yield of COF2 decreases while the yield of CH3COF increases, reflecting a competition for CH3CF2O radicals. The simplest explanation for the observed dependence of the CH3COF yield on [NO(x)] is that the atmospheric degradation of CH3CF2H proceeds via OH radical attack to give CH3CF2 radicals which add O2 to give CH3CF2O2 radicals. Reaction of CH3CF2O2 radicals with NO gives a substantial fraction of chemically activated alkoxy radicals, [CH3CF2O]. In 1 atm of air, approximately 30% of the alkoxy radicals produced in the CH3CF2O2 + NO reaction possess sufficient internal excitation to undergo "prompt" (rate >10(10) s(-1)) decomposition to give CH3 radicals and COF2. The remaining approximately 70% become thermalized, CH3CF2O, and undergo decomposition more slowly at a rate of approximately 2 x 10(3) s(-1). At high concentrations (>50 mTorr), NO(x) is an efficient scavenger for CH3CF2O radicals leading to the formation of CH3COF and FNO.     

Bond and mode selectivity in the reaction of atomic chlorine with vibrationally excited CH2D2

The title reaction is investigated by co-expanding a mixture of Cl2 and CH2D2 into a vacuum chamber and initiating the reaction by photolyzing Cl2 with linearly polarized 355 nm light. Excitation of the first C-H overtone of CH2D2 leads to a preference for hydrogen abstraction over deuterium abstraction by at least a factor of 20, whereas excitation of the first C-D overtone of CH2D2 reverses this preference by at least a factor of 10. Reactions with CH2D2 prepared in a local mode containing two quanta in one C-H oscillator /2000>- or in a local mode containing one quantum each in two C-H oscillators /1100> lead to products with significantly different rotational, vibrational, and angular distributions, although the vibrational energy for each mode is nearly identical. The Cl+CH2D2/2000>- reaction yields methyl radical products primarily in their ground state, whereas the Cl+CH2D2/1100> reaction yields methyl radical products that are C-H stretch excited. The HCl(v=1) rotational distribution from the Cl+CH2D2/2000>- reaction is significantly hotter than the HCl(v=1) rotational distribution from the Cl+CH2D2/1100> reaction, and the HCl(v=1) differential cross-section (DCS) of the Cl+CH2D2/2000>- reaction is more broadly side scattered than the HCl(v=1) DCS of the Cl+CH2D2/1100> reaction. The results can be explained by a simple spectator model and by noting that the /2000>- mode leads to a wider cone of acceptance for the reaction than the /1100> mode. These measurements represent the first example of mode selectivity observed in a differential cross section, and they demonstrate that vibrational excitation can be used to direct the reaction pathway of the Cl+CH2D2 reaction.     

Molybdenum(VI) catalysts obtained from η3-allyl dicarbonyl precursors: synthesis, characterization and catalytic performance in cyclooctene epoxidation

The oxidative decarbonylation of the η(3)-allyl dicarbonyl complexes [Mo(η(3)-C(3)H(5))Cl(CO)(2)(L)] (L = 2,2'-bipyridine (bipy) (1), 4,4'-di-tert-butyl-2,2'-bipyridine (di-tBu-bipy) (2)) by reaction with aqueous tert-butylhydroperoxide (TBHP) or H(2)O(2) gave the following compounds in good to excellent yields: the oxo-bridged dimers [MoO(2)Cl(L)](2)O (L = bipy (3), di-tBu-bipy (6)) using TBHP(10 equiv.)/CH(3)CN/r.t.; the molybdenum oxide/bipyridine hybrid material {[MoO(3)(bipy)][MoO(3)(H(2)O)]}(n) (4) and the octanuclear complex [Mo(8)O(24)(di-tBu-bipy)(4)] (7) using TBHP(50 equiv.)/H(2)O/70 °C; the oxodiperoxo complexes MoO(O(2))(2)(L) (L = bipy (5), di-tBu-bipy (8)) using H(2)O(2)(10 equiv.)/CH(3)CN/r.t. The structure of 7·x(solvent) (where solvent = CH(2)Cl(2) and/or diethyl ether) was determined by single crystal X-ray diffraction. Despite possessing the same windmill-type complex as that described previously for 7·10CH(2)Cl(2), the crystal structure of 7·x(solvent) is unique due to differences in the crystal packing. Compounds 1-8 were examined as catalysts or catalyst precursors for the epoxidation of cyclooctene using aqueous TBHP or H(2)O(2) as oxidant at 55 or 70 °C. Reactions were performed without co-solvent or with the addition of water, ethanol or acetonitrile. Cyclooctene oxide was always the only reaction product. Solids recovered after 24 h reaction at 70 °C were identified by FT-IR spectroscopy as the hybrid 4 from (1,3-5)/TBHP, complex 5 from (1,3-5)/H(2)O(2), and complex 8 from (2,6-8)/H(2)O(2). With TBHP as oxidant, the highest epoxide yields (for 24 h reaction at 70 °C) were obtained using excess H(2)O as solvent (28-38% for 1,3-5; 87-98% for 2,6-8), while with H(2)O(2) as oxidant, the highest epoxide yields were obtained using CH(3)CN as solvent (54-81% for 3-8).     

CH2(X 3B1)自由基与O2的反应

用时间分辨富里叶红外发射谱仪（ＴＲ－ＦＴＩＲＳ）研究了ＣＨ２（Ｘ＾３Ｂ１）自由基与Ｏ２反应的通道及产物的振动动态布居，基电子态自由基ＣＨ２（Ｘ＾３Ｂ１）由３５１ｎｍ紫外激光光解ＣＨ２ＣＯ生成，观测到振动发态反应产物ＣＯ（ｖ≤１０），ＣＯ２（ｖ３≤７）ＯＨ（Ｈ２Ｏ）和Ｈ２ＣＯ的红外发射，证实存在生成Ｈ２ＣＯ的通道，由光谱拟合得到不同时刻ＣＯ（ｖ）和ＣＯ２（ｖ３）的相对振动布居，发现ｖ＝４能级的布居数     

CH3与NO2的反应

The elementary reaction of the CH3 radical with NO2 was investigated by time-resolved FTIR spectroscopy and quantum chemical calculations. The CH3 radical was produced by laser photolysis of CH3Br or CH3I at 248 nm. Vibrationally excited products OH, HNO and CO2 were observed by the time-resolved spectroscopy for the first time. The formation of another product NO was also verified. According to these observations, the product channels leading to CH3O+NO, CH2NO+OH and HNO+H2CO were identified. The channel of CH3O+NO was the major one. The reaction mechanisms of the above channels were studied by quantum chemical calculations at CCSD(T)/6-311++G(df,p)//MP2/6-311G(d,p) level. The calculated results fit with the experimental observations well.     

Dimethylselenide as a probe for reactions of halogenated alkoxyl radicals in aqueous solution. Degradation of dichloro- and dibromomethane

Using pulse radiolysis and steady-state gamma-radiolysis techniques, it has been established that, in air-saturated aqueous solutions, peroxyl radicals CH 2HalOO (*) (Hal = halogen) derived from CH 2Cl 2 and CH 2Br 2 react with dimethyl selenide (Me 2Se), with k on the order of 7 x 10 (7) M (-1) s (-1), to form HCO 2H, CH 2O, CO 2, and CO as final products. An overall two-electron oxidation process leads directly to dimethyl selenoxide (Me 2SeO), along with oxyl radical CH 2HalO (*). The latter subsequently oxidizes another Me 2Se molecule by a much faster one-electron transfer mechanism, leading to the formation of equal yields of CH 2O and the dimer radical cation (Me 2Se) 2 (*+). In absolute terms, these yields amount to 18% and 28% of the CH 2ClO (*) and CH 2BrO (*) yields, respectively, at 1 mM Me 2Se. In competition, CH 2HalO (*) rearranges into (*)CH(OH)Hal. These C-centered radicals react further via two pathways: (a) Addition of an oxygen molecule leads to the corresponding peroxyl radicals, that is, species prone to decomposition into H (+)/O 2 (*-) and formylhalide, HC(O)Hal, which further degrades mostly to H (+)/Hal (-) and CO. (b) Elimination of HHal yields the formyl radical H-C(*)=O with a rate constant of about 6 x 10 (5) s (-1) for Hal = Cl. In an air-saturated solution, the predominant reaction pathway of the H-C(*)=O radical is addition of oxygen. The formylperoxyl radical HC(O)OO (*) thus formed reacts with Me 2Se via an overall two-electron transfer mechanism, giving additional Me 2SeO and formyloxyl radicals HC(O)O(*). The latter rearrange via a 1,2 H-atom shift into (*)C(O)OH, which reacts with O2 to give CO2 and O2(*)(-). The minor fraction of H-C(*)=O undergoes hydration, with an estimated rate constant of k approximately 2 x 10(5) s(-1). The resulting HC(*)(OH)2 radical, upon reaction with O2, yields HCO 2H and H (+)/O2(*-). Some of the conclusions about the reactions of halogenated alkoxyl radicals are supported by quantum chemical calculations [B3LYP/6-31G(d,p)] taking into account the influence of water as a dielectric continuum [by the self-consistent reaction field polarized continuum model (SCRF=PCM) technique]. Based on detailed product studies, mechanisms are proposed for the free-radical degradation of CH 2Cl 2 and CH 2Br 2 in the presence of oxygen and an electron donor (namely, Me 2Se in this study), and properties of the reactive intermediates are discussed.     

HYDROGENATION OF CO_2 OVER A YBa_2Cu_3O_(6～7) CATALYST

研究了ＹＢａＣｕ３Ｏ６～７超导催化剂上ＣＯ２的加氢制醇反应。考察了温度、压力和空速等条件对催化剂反应性能的影响。反应的主要产物是甲醇、ＣＯ和少量甲醚。利用ＸＰＳ、ＸＲＤ和ＡＦＭ等技术对催化剂的结构、铜的存在状态和反应活性位进行表征发现，在反应过程中，ＹＢａ２Ｃｕ３Ｏ６～７由ｏｒｔｈｏｍｂｉｃ相转变为ｔｅｔｒａｇｏｎａｌ相。反应活性位可能是Ｃｕ（Ｉ）物种。反应后催化剂颗粒的分散程度明显提高     

CH2BrCl在265 nm光解产生的氯甲基自由基的振动内能

利用离子速度影像技术研究了CH2BrCl在265nm附近的激光光解.利用2+1共振增强多光子电离分别获得光解产物Br(2P1/2)和Br(2P3/2)的离子速度图像,从而得出Br(2P1/2)和Br(2P3/2)的速度分布,以及光解碎片的总平动能分布.据此,运用角动量守恒碰撞模型获得了解离氯甲基自由基(·CH2Cl)的振动内能分布.研究结果表明:CH2BrCl+hv→Br(2P1/2)+CH2Cl通道产生的氯甲基自由基中被激发的振动模主要是v4、v3+v4、v2+v4和v2+v6;CH2BrCl+hv→Br(2P3/2)+CH2Cl通道产生的氯甲基自由基中被激发的振动模主要是v2+v6、v1+v3、v2+v5、v2+v3+v5和v1+v5;母体分子CH2BrCl在吸收光解光子后除有v5(CBrstretch)振动模被激发外,还有v7(CH2a-stretch)等其它振动模也被激发.     

Atmospheric chemistry of 4:2 fluorotelomer alcohol (n-C4F9CH2CH2OH): products and mechanism of Cl atom initiated oxidation in the presence of NOx

Smog chamber/FTIR techniques were used to study the Cl atom initiated oxidation of 4:2 fluorotelomer alcohol (C(4)F(9)CH(2)CH(2)OH, 4:2 FTOH) in the presence of NO(x) in 700 Torr of N(2)/O(2) diluent at 296 K. Chemical activation effects play an important role in the atmospheric chemistry of the peroxy, and possibly the alkoxy, radicals derived from 4:2 FTOH. Cl atoms react with C(4)F(9)CH(2)CH(2)OH to give C(4)F(9)CH(2)C(*)HOH radicals which add O(2) to give chemically activated alpha-hydroxyperoxy radicals, [C(4)F(9)CH(2)C(OO(*))HOH]*. In 700 Torr of N(2)/O(2) at 296 K, approximately 50% of the [C(4)F(9)CH(2)C(OO(*))HOH]* radicals decompose "promptly" to give HO(2) radicals and C(4)F(9)CH(2)CHO, the remaining [C(4)F(9)CH(2)C(OO(*))HOH]* radicals undergo collisional deactivation to give thermalized peroxy radicals, C(4)F(9)CH(2)C(OO(*))HOH. Decomposition to HO(2) and C(4)F(9)CH(2)CHO is the dominant atmospheric fate of the thermalized peroxy radicals. In the presence of excess NO, the thermalized peroxy radicals react to give C(4)F(9)CH(2)C(O(*))HOH radicals which then decompose at a rate >2.5 x 10(6) s(-1) to give HC(O)OH and the alkyl radical C(4)F(9)CH(2)(*). The primary products of 4:2 FTOH oxidation in the presence of excess NO(x) are C(4)F(9)CH(2)CHO, C(4)F(9)CHO, and HCOOH. Secondary products include C(4)F(9)CH(2)C(O)O(2)NO(2), C(4)F(9)C(O)O(2)NO(2), and COF(2). In contrast to experiments conducted in the absence of NO(x), there was no evidence (<2% yield) for the formation of the perfluorinated acid C(4)F(9)C(O)OH. The results are discussed with regard to the atmospheric chemistry of fluorotelomer alcohols.     

Dithiocarboxylate complexes of ruthenium(II) and osmium(II)

The ruthenium(II) complexes [Ru(R)(κ(2)-S(2)C·IPr)(CO)(PPh(3))(2)](+) (R = CH=CHBu(t), CH=CHC(6)H(4)Me-4, C(C≡CPh)=CHPh) are formed on reaction of IPr·CS(2) with [Ru(R)Cl(CO)(BTD)(PPh(3))(2)] (BTD = 2,1,3-benzothiadiazole) or [Ru(C(C≡CPh)=CHPh)Cl(CO)(PPh(3))(2)] in the presence of ammonium hexafluorophosphate. Similarly, the complexes [Ru(CH=CHC(6)H(4)Me-4)(κ(2)-S(2)C·ICy)(CO)(PPh(3))(2)](+) and [Ru(C(C≡CPh)=CHPh)(κ(2)-S(2)C·ICy)(CO)(PPh(3))(2)](+) are formed in the same manner when ICy·CS(2) is employed. The ligand IMes·CS(2) reacts with [Ru(R)Cl(CO)(BTD)(PPh(3))(2)] to form the compounds [Ru(R)(κ(2)-S(2)C·IMes)(CO)(PPh(3))(2)](+) (R = CH=CHBu(t), CH=CHC(6)H(4)Me-4, C(C≡CPh)=CHPh). Two osmium analogues, [Os(CH=CHC(6)H(4)Me-4)(κ(2)-S(2)C·IMes)(CO)(PPh(3))(2)](+) and [Os(C(C≡CPh)=CHPh)(κ(2)-S(2)C·IMes)(CO)(PPh(3))(2)](+) were also prepared. When the more bulky diisopropylphenyl derivative IDip·CS(2) is used, an unusual product, [Ru(κ(2)-SC(H)S(CH=CHC(6)H(4)Me-4)·IDip)Cl(CO)(PPh(3))(2)](+), with a migrated vinyl group, is obtained. Over extended reaction times, [Ru(CH=CHC(6)H(4)Me-4)Cl(BTD)(CO)(PPh(3))(2)] also reacts with IMes·CS(2) and NH(4)PF(6) to yield the analogous product [Ru{κ(2)-SC(H)S(CH=CHC(6)H(4)Me-4)·IMes}Cl(CO)(PPh(3))(2)](+)via the intermediate [Ru(CH=CHC(6)H(4)Me-4)(κ(2)-S(2)C·IMes)(CO)(PPh(3))(2)](+). Structural studies are reported for [Ru(CH=CHC(6)H(4)Me-4)(κ(2)-S(2)C·IPr)(CO)(PPh(3))(2)]PF(6) and [Ru(C(C≡CPh)=CHPh)(κ(2)-S(2)C·ICy)(CO)(PPh(3))(2)]PF(6).     

Direct measurement of Criegee intermediate (CH2OO) reactions with acetone, acetaldehyde, and hexafluoroacetone

Criegee biradicals, i.e., carbonyl oxides, are critical intermediates in ozonolysis and have been implicated in autoignition chemistry and other hydrocarbon oxidation systems, but until recently the direct measurement of their gas-phase kinetics has not been feasible. Indirect determinations of Criegee intermediate kinetics often rely on the introduction of a scavenger molecule into an ozonolysis system and analysis of the effects of the scavenger on yields of products associated with Criegee intermediate reactions. Carbonyl species, in particular hexafluoroacetone (CF(3)COCF(3)), have often been used as scavengers. In this work, the reactions of the simplest Criegee intermediate, CH(2)OO (formaldehyde oxide), with three carbonyl species have been measured by laser photolysis/tunable synchrotron photoionization mass spectrometry. Diiodomethane photolysis produces CH(2)I radicals, which react with O(2) to yield CH(2)OO + I. The formaldehyde oxide is reacted with a large excess of a carbonyl reactant and both the disappearance of CH(2)OO and the formation of reaction products are monitored. The rate coefficient for CH(2)OO + hexafluoroacetone is k(1) = (3.0 ± 0.3) × 10(-11) cm(3) molecule(-1) s(-1), supporting the use of hexafluoroacetone as a Criegee-intermediate scavenger. The reactions with acetaldehyde, k(2) = (9.5 ± 0.7) × 10(-13) cm(3) molecule(-1) s(-1), and with acetone, k(3) = (2.3 ± 0.3) × 10(-13) cm(3) molecule(-1) s(-1), are substantially slower. Secondary ozonides and products of ozonide isomerization are observed from the reactions of CH(2)OO with acetone and hexafluoroacetone. Their photoionization spectra are interpreted with the aid of quantum-chemical and Franck-Condon-factor calculations. No secondary ozonide was observable in the reaction of CH(2)OO with acetaldehyde, but acetic acid was identified as a product under the conditions used (4 Torr and 293 K).