Kinetics of the adsorption of strontium(II) by a novel silica-based 4,4'',(5'')-di(tert-butylcyclohexano)-18-crown-6 extraction resin in nitric acid medium

A new type of silica-based chelating extraction resin, DtBuCH18C6/SiO₂-P, was prepared by impregnating a crown ether derivative, 4,4,(5)-di(tert-butylcyclohexano)-18-crown-6 (DtBuCH18C6), into the porous silica/polymer composite particles (SiO₂-P). The adsorption of Sr(II) and some other fission product elements was investigated by a batch adsorption experiment in HNO₃ medium. It was found that Sr(II) exhibits a strong adsorption onto the extraction resin, while the other fission product elements show almost no or only weak adsorption. The adsorption kinetics of Sr(II) was explained by assuming as the rate-controlling step the complex-formation reaction between Sr(II) and DtBuCH18C6 contained in the extraction resin. The rate equation of Sr(II) adsorption was determined as:-d[Sr(II)]/dt = k[Sr(II)][DtBuCH18C6][NO₃ ^–]^0.5.     

SPEC Process II. Adsorption of strontium and some typical co-existent elements contained in high level liquid waste onto a macroporous silica-based crown ether impregnated functional composite

To separate Sr(II), one of the heat emitting nuclides, from high level liquid waste (HLLW), a macroporous silica-based DtBuCH18C6 polymeric composite, DtOct/SiO₂-P, was synthesized by means of molecular modification of 4,4′,(5′)-di(tert-butylcyclohexano)-18-crown-6 (DtBuC H18C6) with a long-chain 1-octanol. It was performed by impregnating and immobilizing DtBuCH18C6 and 1-octanol molecules into the pores of the SiO₂-P particles, the macroporous silica-based support. The adsorption of Sr(II) and some co-existent typical elements Na(I), K(I), Cs(I), Ru(III), Mo(VI), Pd(II), Ba(II), La(III), and Y(III) contained in highly active liquid waste (HLW) towards DtOct/SiO₂-P was investigated at 323 K. The effects of contact time and the concentration of HNO₃ in a range of 0.1–5.0M on the adsorption of the tested metals were examined. The macroporous silica-based DtOct/SiO₂-P polymeric composite showed strong adsorption ability and high selectivity for Sr(II) over all of the tested metals except Ba(II). The optimum acidity of Sr(II) adsorption onto DtOct/SiO₂-P was determined to be 2.0M HNO₃. The bleeding behavior of DtOct/SiO₂-P in aqueous phase was evaluated using total organic carbon (TOC) analysis. The content of TOC increased with increasing the HNO₃ concentration and contact time. It resulted from the decrease in the stability of the associated species, C₈H₁₇-OH• DtBuCH18C6 formed through hydrogen binding, because of high temperature.     

Bleeding evaluation of the stationary phase from a few novel macroporous silica-substrate polymeric materials used for radionuclide partitioning from HLLW in MAREC process

Summary To separate minor actinides from HLLW by extraction chromatography, a few novel silica-based di(2-ethylhexyl)phosphoric acid (HDEHP), 4,4¢,(5¢)-di(tert-butylcyclohexano)-18-crown-6 (DtBuCH18C6), octyl(phenyl)-N,N-diisobutylcarbamoylmethylphosphine oxide (CMPO), and N,N,N¢,N¢-tetraoctyl-3-oxapentane-1,5-diamide (TODGA) polymeric adsorption materials (HDEHP/SiO₂-P, DtBuCH18C6/SiO₂-P, CMPO/SiO₂-P, and TODGA/SiO₂-P) were synthesized by impregnating HDEHP, DtBuCH18C6, CMPO, and TODGA into the pores of porous SiO₂-P particles, which were the new kind of inorganic/organic composites consisted of macroporous SiO₂ and copolymer. The bleeding behavior of these composites was investigated by examining the effect of contact time and HNO₃ concentration. It was found that in the tested HNO₃ concentration range, a noticeable quantity of DtBuCH18C6, at least 600 ppm, leaked out from DtBuCH18C6/SiO₂-P because of the protonation of DtBuCH18C6 with hydrogen ion, while the others were lower and basically equivalent to the solubility of HDEHP, CMPO, or TODGA in corresponding acidities solutions. Based on the batch experiment, the bleeding of CMPO/SiO₂-P and TODGA/SiO₂-P, the main adsorbents used in MAREC process for HLLW partitioning, was evaluated by column operation in 0.01M HNO₃ and 3M HNO₃. The quantity of CMPO leaked was ~48 ppm in 0.01M HNO₃ and ~37 ppm in 3.0M HNO₃. The bleeding of TODGA decreased from 23.2 ppm to 7.27 ppm at the initial stage and then basically kept constant. An actual bleeding of TODGA was evaluated by the separation of Sr(II) from a 2.0M HNO₃ solution containing 5.0 ^. 10^-3M of 6 typically simulated elements.     

Modification of a novel macroporous silica-based crown ether impregnated polymeric composite with 1-dodecanol and its adsorption for some fission and non-fission products contained in high level liquid waste

A novel macroporous silica-based chelating polymeric composite, DtDo/SiO₂-P, was synthesized by molecular modification of 4,4′,(5′)-di-(tert-butylcyclohexano)-18-crown-6 (DtBuCH18C6) with a long carbon chain organic compound 1-dodecanol. It was performed through impregnation and immobilization of DtBuCH18C6 and 1-dodecanol molecules into the pores of the SiO₂-P particles. The adsorption of a few fission and non-fission product elements Sr(II), Ba(II), Cs(I), Ru(III), Mo(VI), Na(I), K(I), Pd(II), La(III), and Y(III) onto DtDo/SiO₂-P was investigated at 323 K. The effects of contact time and the HNO₃ concentration in a range of 0.1-4.0 M were investigated. It was found that at the optimum concentration of 2.0 M HNO₃, DtDo/SiO₂-P exhibited strong adsorption ability and excellent selectivity for Sr(II) over all of the tested elements, which showed very weak or almost no adsorption except Ba(II). The bleeding of total organic carbon (TOC) from DtDo/SiO₂-P was evaluated. The quantity of TOC in aqueous phase increased with an increase in HNO₃ concentration in terms of a linear equation [TOC] = 35.82[HNO₃] + 115.5 with a correlation coefficient of 0.9751. The TOC content leaked from DtDo/SiO₂-P modified by 1-dodecanol, 119.0-269.3 ppm, in the range of 1.0-4.0 M HNO₃ was significantly lower than that of 424.8-634.6 ppm in the case without modification. It resulted from the intermolecular interaction force of DtBuCH18C6 and 1-dodecanol through hydrogen bonding. The reduction of DtBuCH18C6 leakage by molecular modification was achieved. It is of great benefit to application of DtDo/SiO₂-P in partitioning of Sr(II), one of the main heat generators, from high level liquid waste (HLLW) in reprocessing process of nuclear spent fuel in MAREC (Minor Actinides Recovery from HLLW by Extraction Chromatography) process developed.     

Separation of strontium ions from a simulated highly active liquid waste using a composite of silica-crown ether in a polymer

To partition Sr(II) from highly active liquid waste (HLW), a macroporous silica-based 4,4',(5')-di(t-butylcyclohexano)-18-crown-6 (DtBuCH18C6)-tri-n-butyl phosphate (TBP) polymeric composite, (DtBuCH18C6+TBP)/SiO(2)-P, was synthesized. It was done by impregnation and immobilization of DtBuCH18C6 and TBP into the pores of the SiO(2)-P particles, where DtBuCH18C6 was modified with TBP. The sorption of Sr(II) and some co-existent elements contained in a simulated HLW onto (DtBuCH18C6+TBP)/SiO(2)-P was investigated at 323 K. It was found that in 2.0 M HNO(3), Sr(II) exhibited strong sorption ability and high selectivity over all the tested metals except Ba(II). Chromatographic partitioning of Sr(II) from 2.0 M HNO(3) containing 5 mM of the tested elements was performed by (DtBuCH18C6+TBP)/SiO(2)-P packed column. La(III), Y(III), Na(I), K(I), Cs(I), Ru(III), Mo(VI), and Pd(II) had almost no sorption and flowed into effluent along with 2.0 M HNO(3). Sr(II) adsorbed strongly by (DtBuCH18C6+TBP)/SiO(2)-P was then eluted effectively by water, while Ba(II) flowed into effluent along with Sr(II) due to the similar chemical properties. In addition, the bleeding of total organic carbon in aqueous phase was evaluated. The results demonstrated that in 2.0 M HNO(3), application of the macroporous silica-based DtBuCH18C6 polymeric composite in chromatographic partitioning of Sr(II) from the simulated HLW is feasible.     

Adsorption characteristics and radiation stability of a silica-based DtBuCH18C6 adsorbent for Sr(II) separation in HNO3 medium

A silica-based adsorbent, (DtBuCH18C6 + dodecanol)/SiO₂-P, which is used for selective separation of Sr(II) from high level liquid wastes, against temperature and gama-irradiation was investigated. The adsorption characteristics of Sr(II), Ba(II), La(III), Nd(III), Gd(III) and Dy(III) under varying nitric acid concentration at different temperatures were measured by batch method. The adsorbent showed higher distribution coefficients (K _d) for Sr(II) compared to other tested metal ions, and the K _d values of Sr(II) decreased with increasing temperature. Thermodynamic parameters of the adsorption process were calculated. The related parameters in adsorption isotherm models were obtained using a non-linear fitting. Uptake capacity from 0.38 to 0.43 mmol g^?1 was obtained for Sr(II) in the temperature range of 298–323 K by the Langmuir equation fitting. The leakage of total organic carbon was below 120 ppm at 298 K and 180 ppm at 323 K, respectively. The degradation of the adsorbent irradiated in 2 M HNO₃ was investigated. It is found that the adsorbed dose of γ-ray more than 50 KGy has a strong influence on K _d of Sr(II). The K _d values of Sr(II) decrease about 3 times ranged from 50 to 500 KGy.     

Stability of <Emphasis Type="Italic">iso</Emphasis>Hex-BTP/SiO<Subscript>2</Subscript>-P adsorbent against acidic hydrolysis and γ-irradiation

Separation of trivalent minor actinides (MA(III): Am(III), Cm(III)) from fission products (FP) in high-level liquid waste (HLLW) is an important task in advanced nuclear-fuel reprocessing systems. For this purpose, an advanced aqueous partitioning process based on extraction chromatography method was studied. Because R-BTP extractants (R-BTP: 2,6-bis(5,6-dialkyl-1,2,4-triazin-3-yl)pyridine, R = alkyl group) exhibit high selectivity for MA(III) over trivalent rare-earth elements (RE(III)), a novel adsorbent isoHex-BTP/SiO₂-P was prepared by impregnating isoHex-BTP extractant into the macroporous SiO₂-P support with a mean diameter of 60 μm. The stability of isoHex-BTP/SiO₂-P against nitric acid and γ-irradiation was investigated. It was found that isoHex-BTP/SiO₂-P adsorbent shows good adsorption affinity to Dy(III). The hydrolytic and radiolytic stability of isoHex-BTP/SiO₂-P adsorbent in 0.01 mol/L HNO₃ was fairly promising. However, the adsorption amount Q of Dy(III) decreased dramatically in 3 mol/L HNO₃ with the increase of the absorbed dose and became nearly zero at the absorbed dose over 46 kGy. These results suggest that with the synergetic effect of radiation and acidic hydrolysis, the adsorbent instantly loses its efficacy.     

Adsorption behavior of Me2-CA-BTP/SiO2-P adsorbent toward MA(III) and Ln(III) in nitrate solution

A porous Me₂-CA-BTP/SiO₂-P adsorbent was prepared to separate MA(III) from Ln(III) in high level liquid waste (HLLW). The adsorption behavior of Me₂-CA-BTP/SiO₂-P toward ²⁴¹Am(III) and Ln(III) in 0.01 M HNO₃-NaNO₃ solution was studied. Me₂-CA-BTP/SiO₂-P showed high adsorption and selectivity toward ²⁴¹Am(III) over Ln(III) fission products with the separation factor (SF) reaching to 557, 2355, 1952, 1082, 214, 105, 86, 14 for Y, La, Ce, Nd, Sm, Eu, Gd and Dy respectively in 0.01 M HNO₃-0.99 M NaNO₃ solution. The adsorption kinetics of both Dy(III) and Eu(III) on Me₂-CA-BTP/SiO₂-P was studied and followed pseudo-second-order rate equation indicating chemical sorption as the rate-limiting step of the adsorption, and the adsorption isotherm of Dy(III) and Eu(III) matched better with the Langmuir isotherm than the Freundlich isotherm with the adsorption amount around 0.22 and 0.20 mmol/g respectively. Thermodynamic study revealed that the adsorption of both Dy(III) and Eu(III) on Me₂-CA-BTP/SiO₂-P was spontaneous and endothermic processes with a positive entropy at 298, 308, 313 K.     

Indoor 222Rn concentrations and the corresponding lung cancer risk in Celein region, west of Al Khums, Libya

Paramagnetic products stabilized in both 4,4′(5′)-di-(tert-butylcyclohexano)-18-crown-6 (DtBuCH18C6) and its solution in 1-octanol upon low temperature (77 K) X-rays irradiation were studied by ESR spectroscopy. Macrocyclic –O–ĊH–CH₂– radicals and acyclic O = C(H)–ĊH–O– radicals were found as main radiolysis products in neat DtBuCH18C6. Fraction of acyclic radicals resulting from the macrocycle cleavage was about 50%. No radical products resulted from t-Bu and cyclohexyl fragments were observed. It was concluded that the primary events were essentially concerned with ionization of the polyether moiety. Irradiation of frozen DtBuCH18C6 solutions in 1-octanol resulted in formation of radicals both from crown ether and alcohol.     

Ein einfacher Weg zu α-substituierten (E)-3-Oxo-1-alkenylphosphonsäureestern

Zusammenfassung -Substituierte -Acylvinylphosphonate3 mitE-Konfiguration [R ²CO-CH=C(R ¹)-P(O)(OR)₂], werden in guten Ausbeuten durchWittig-Reaktion von Acylphosphonsäureestern1 [R ¹CO-P(O)(OR)₂,R ¹=Alkyl oder Aryl] mit (2-Oxoalkyliden)triphenylphosphoranen2 [R ²CO-CH=PPh ₃,R ²=Alkyl, O-Alkyl oder CH₂ X (X=Br, OMe, CO₂ Et)] erhalten.

---

A convenient route to -substituted dialkyl (E)-3-oxo-1-alkenylphosphonates

-Substituted dialkyl (E)--acylvinylphosphonates [R ²CO-CH=C(R ¹)-P(O)(OR)₂,3], are easily obtained in good yields byWittig-reaction of dialkyl acylphosphonates1 [R ¹CO-P(O)(OR)₂,R ¹=alkyl or aryl) with 2-oxoalkylidene triphenylphosphoranes2 [R ²CO-CH=PPh ₃,R ²=alkyl, O-alkyl and CH₂ X (X=Br, OMe, CO₂ Et)].

     

Solvent effects on extraction of potassium picrate with benzo-18-crown-6. A new equation for the determination of ion-pair formation of crown ether-metal salt complexes in water

In order to determine the ion-pair formation constant of a crown ether-metal salt 1:1:1 complex in water, an equation is derived from regular solution theory and its predictions are verified experimentally by the solvent extraction method using benzo-18-crown-6 (B18C6), potassium picrate (KA), and various diluents of low dielectric constant. The distribution constants of B18C6 itself and the overall extraction constants of KA with B18C6 were determined at 25±0.2°C. The distribution constants of the neutral K(B18C6)A complex were calculated from these data. The literature value for the complex-formation constant of K(B18C6)⁺ in water and the ion-pair formation constant (K _K(B18C6)A ) for K(B18C6)A in water determined in this study were log K _K(B18C6)A =3.12±0.23 at 25°C). The distribution behavior of B18C6 and K(B18C6)A is explained in terms of regular solution theory. The molar volumes V (cm³·mol^–1) and solubility parameters (cal^1/2-cm^–3/2) are as follows: V _B18C6 =249±36; V _K(B18C6)A =407±56; _B18C6 = 11.5 ± 0.5; and _K(B18C6)A = 11.5 ± 0.5.     

Separation of Cs and Sr using polyoxonium compounds

Extraction separation and concentration of Cs and Sr from aqueous solutions, containing macroconcentrations of competitive ions (Li⁺, Na⁺, K⁺, Mg²⁺, Ca²⁺, Al³⁺, Fe³⁺) by the nitrobenzene solutions of bis-1,2-dicarbollylcobaltate in the presence of linear and cyclic polyoxonium compounds (POC) has been investigated. It has been found, that the addition of DB18C6 increases the distribution ratio of cesium (D_cs) but the addition of other crowns and PEG decreases D_Cs value and selectivity of D_Sr and the selectivity of Sr/Ca separation. Separation factors of Sr/Ca increase from (Sr/Ca)2 (found in the absence of POD) to (Sr/Ca)50 (for DB18C6), (Sr/Ca)100 (for 18C6 and DCH18C6) and (Sr/Ca)1000 for 15C5.     

Atmospheric depositional fluxes of cosmogenic <Superscript>32</Superscript>P, <Superscript>33</Superscript>P and <Superscript>7</Superscript>Be in the Sevastopol region

⁹⁰Y was separated from ⁹⁰Sr using an extraction chromatographic resin consisting of 4, 4′(5′)-bis-t-butylcyclohexano-18-crown-6 (DtBuCH₁₈C₆), 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl) amide (C₂mimNTf₂), and a polymer (Amberlite XAD-7). Ionic liquid was introduced into the column to improve the separation efficiency. The column showed an excellent performance for the separation of Y from Sr. After the separation, the ratio of ⁹⁰Sr/⁹⁰Y was <2.0 × 10^?5; the column was recycled for >18 times. This study provides preliminary results on columns to produce ⁹⁰Y with a high purity in radiopharmaceuticals.     

Synthesis and application of a macroporous silica-based polymeric octyl(phenyl)-N,N-diisobutylcarbamoylmethylphoshine oxide composite for the chromatographic separation of high level liquid waste

Summary The Minor Actinides Recovery from HLW by Extraction Chromatography (MAREC) process was used mainly for the separation of minor actinides (MAs) and some specific fission products (FPs) from highly active liquid waste (HLW) by the composite CMPO/SiO₂-P of the macroporous silica based polymeric octyl(phenyl)-N,N-diisobutylcarbamoylmethylphoshine oxide (CMPO) and others. In this study a cascade of chromatographic separation was performed on a 3.0M HNO₃ solution containing 5.0 ^. 10^-3M of 13 elements, at 323 K. The cascade consisted of three columns the first and second ones were packed with CMPO/SiO₂-P and the third with SiO₂-P particles. The first column was employed to prepare various eluents containing saturated CMPO. The second column was used for separation into groups. The CMPO of CMPO/SiO₂-P was recovered from the effluent by the third column and a CMPO-free effluent containing minor actinides was obtained. The elements contained in the simulated HLW of 3.0M HNO₃ were separated into (1) a non-adsorption group (Sr, Cs, and Ru etc.), (2) a MA-hRE (heavy rare earth)-Mo-Zr group, and (3) a lRE (light rare earth) group by eluting with 3.0M HNO₃, 0.05M DTPA (diethylenetriaminepentaacetic acid) (pH 2.0) and HNO₃ (pH 3.5), respectively. The resultant MA-hRE-Mo-Zr mixture containing minor actinides was then separated into the groups (1) Pd-Ru, (2) MA-hRE, and (3) Mo-Zr by utilizing 3.0M HNO₃, distilled water, and 0.05M DTPA (pH 2.0) as eluents. More than 92% of CMPO in the MA-hRE containing effluent was adsorbed by SiO₂-P particles. The effectivity and technical feasibility of MAREC process were demonstrated.     

Synthesis and characterization of cobalt(II), nickel(II), copper(II) and zinc(II) complexes with acetylacetone bis-benzoylhydrazone and acetylacetone bis-isonicotinoylhydrazone

Summary Acetylacetone bis-benzoylhydrazone (PhCONHN=CMe)₂ CH₂(LH₂) and acetylacetone bis-isonicotinoylhydrazone (NC₅H₄CONHN=CMe)₂CH₂(LH₂) complexes of the types [ML] and [ML] (M = Co^II, Ni^II, Cu^II or Zn^II) have been prepared and characterized. All the complexes are non-electrolytes and the cobalt(II) complexes are lowspin, the nickel(II) complexes are diamagnetic and the copper(II) complexes are paramagnetic. The ligands chelate via two C=N groups and two deprotonated enolate groups. The e.s.r. spectra of the copper(II) complexes indicate a tetragonally distorted dimeric structure. The X-ray diffraction parameters for [CoL] and [NiL] correspond to a tetragonal crystal lattice.     

Characteristic of the Ag(II)/Ag(I) system in the presence of 2,2′:6′,2″-terpyridine in acetonitrile

Summary Composition of complexes of Ag(II) and Ag(I) ions with 2,2:6,2-terpyridine (tp) have been established. It has been found that the Ag⁺ ion forms only one complex Ag(tp)⁺ withtp in acetonitrile; its conditional formation constant: ₀₁=6.6·10⁴ has been determined by the potentiometric method. Equilibria and redox systems formed in solutions due to the complexation of Ag⁺ and Ag²⁺ and oxidation of Ag(II) complexes are described. Their formal potentials have been found by coulometric and voltamperometric examinations. The presence of the Ag(tp) ₂ ³⁺ ion in the anodic oxidized solutions of the complexes Ag(tp)(NO₃)₂ and Ag(tp)₂(NO₃)₂ has been proved. Properties of the system Ag(II)/Ag(I) in the presence of terpyridine in water and in acetonitrile have been compared.

---

Charakteristik der Systeme Ag(II)/Ag(I) in Gegenwart von 2,2:6,2-Terpyridin in Acetonitril

Zusammenfassung Die Zusammensetzung der Komplexe von Ag(I)- und Ag(II)-Ionen mit 2,2:6,2-Terpyridin (tp) wurde bestimmt. Das Ag⁺-Ion bildet mittp in Acetonitril nur einen Komplex-Ag(tp)⁺. Seine Konditionalbildungskonstante ₀₁=6.6·10⁴ wurde mit Hilfe der potentiometrischen Methode bestimmt. Es wurden die Gleichgewichte und Redoxsysteme als Resultat der Komplexbildung von Ag(II)- und Ag(I)-Ionen und der Ag(II)-Komplexoxidation charakterisiert und die Formalpotentiale mittels Voltametrie und Coulometrie bestimmt. Die Gegenwart der Ag(tp) ₂ ³⁺ -Ionen wurde in anodisch oxydierten Lösungen der Komplexe Ag(tp)(NO₃)₂ und Ag(tp)₂(NO₃)₂ nachgewiesen. Die Eigenschaften des Systems Ag(II)/Ag(I) in Gegenwart von 2,2:6,2-Terpyridin in Wasser und in Acetonitril wurden verglichen.

     

Cation exchange column chromatography in aqueous ammonium acetate: Separation of U(VI), Al(III), Sr(II), Ba(II) and Hg(II) from other metal ions

Summary A rigorous analysis of the effect of various concentrations (0.02–1.60M) of ammonium acetate on the distribution coefficients (K) of a number of metal ions using cation exchanger Dowex 50W-X8 (100–200 mesh NH₄ ⁺-form) has been made. On account of the low affinity of U(VI) for resin in 0.20M NH₄OAc it can be separated from all other metal ions. HighK values of Sr(II), Ba(II) and Hg(II) at higher 0.50M NH₄OAc are responsible for their separation from others. The abnormal column Chromatographic behaviour of Al(III) permits its separation from other metal ions including U(VI), Sr(II), Ba(II), Hg(II). A number of binary and ternary separations have been achieved.     

Evaluation study on properties of isohexyl-BTP/SiO2-P resin for direct separation of trivalent minor actinides from HLLW

In order to develop a direct separation process for trivalent minor actinides from fission products in high level liquid waste (HLLW) by extraction chromatography, a novel macroporous silica-based 2,6-bis(5,6-diisohexyl)-1,2,4-triazin-3-yl)pyridine resin (isohexyl-BTP/SiO₂-P resin) was prepared. The content of isohexyl-BTP extractant in the resin was as high as 33.3 wt%. The resin exhibited much higher adsorption affinity for Am(III) in 2–3 M (mol/L) HNO₃ solution over U and FP which are contained in HLLW. The kinetic data were analyzed using pseudo-second-order equation. The results suggested that the Eu(III), Gd(III), and Dy(III) adsorption was well explained by the pseudo-second-order equation. Quantitative desorption for adsorbed elements was achieved by using H₂O or thiourea as eluting agents. However, the kinetics of adsorption and desorption were rather slow and this drawback needs to be resolved. Stability of the resin against HNO₃ was also examined. It was found that the resin was considerably stable against ≤4 M HNO₃ solution for the reasons of an extremely small leakage of the extractant into the solution from the resin and the adsorption performance keeping for rare earths in 3 M HNO₃ solution.     

Distribution of Strontium in the System Water — Ca(NO3)2 — Nitrobenzene — Strontium Dicarbollylcobaltate — 18-crown-6

From several strontium distribution experiments with ⁸⁵Sr tracer, the extraction constant corresponding to the equilibrium Ca²⁺(aq)+SrL²⁺(nb) CaL²⁺(nb)+Sr²⁺ (aq) in the two-phase water-nitrobenzene system (L = 18-crown-6; aq = aqueous phase, nb = nitrobenzene phase) was tentatively evaluated as log K _ex (Ca²⁺,SrL²⁺) = –1.9±0.1. Furthermore, the stability constant of the calcium — 18-crown-6 complex in nitrobenzene saturated with water was calculated for a temperature of 25 °C: log _nb(Cal²⁺) = 10.1±0.1.     

Lamellar Copper(I) Thiocyanate‐Based Coordination Polymers containing the Alkali Cation ligating Thiacrown Ether 1,10‐Dithia‐18‐crown‐6

The lamellar coordination polymer [(CuSCN)₂(μ‐1,10DT18C6)] (1,10DT18C6 = 1,10‐dithia‐18‐crown‐6), in which staircase‐like CuSCN double chains are bridged by thiacrown ether ligands, may be prepared in two triclinic modifications 1 a and 1 b by reaction of CuSCN with 1,10DT18C6 in respectively benzonitrile or water. Performing the reaction in acetonitrile in the presence of an equimolar quantity of KSCN leads, in contrast, to formation of the K⁺ ligating 2‐dimensional thiocyanatocuprate(I) net [{Cu₂(SCN)₃}^–] of 2 , half of whose Cu(I) atoms are connected by 1,10DT18C6 macrocycles. The potassium cations in [{K(CH₃CN)}{Cu₂(SCN)₃(μ‐1,10DT18C6)}] ( 2 ) are coordinated by all six potential donor atoms of a single thiacrown ether in addition to a thiocyanate S and an acetonitrile N atom. Under similar conditions, reaction of CuI, NaSCN and 1,10DT18C6 affords [{Na(CH₃CN)₂}{Cu₄I₄(SCN)(μ‐1,10DT18C6)}] ( 3 ), which contains distorted Cu₄I₄ cubes as characteristic molecular building units. These are bridged by thiocyanate and thiacrown ether ligands into corrugated Na⁺ ligating sheets. In the presence of divalent Ba²⁺ cations, charge compensation requirements lead to formation of discrete [Cu(SCN)₃(1,10DT18C6‐κS)]^2– anions in [Ba{Cu(SCN)₃(1,10DT18C6‐κS)}] ( 4 ).