Miscibility and Thermal Behaviour of Poly(styrene-co-itaconic acid)/Poly(butyl methacrylate-co-4-vinylpyridine) Mixtures. Accessibility and Self-Association Effects

Summary: The miscibility and thermal behaviour of binary mixtures of poly(styrene-co-itaconic acid) containing 11 or 27 mol % of itaconic acid (PSIA-11 or PSIA27) with poly(butyl methacrylate) (PBMA)or poly(butyl methacrylate-co-4-vinylpyridine) containing 10 or 26 mol% of 4-vinylpyridine (PBM4VP-10, PBM4V-P26) were investigated by differential scanning calorimetry, scanning electron microscopy, FTIR spectroscopy and thermogravimetry. The results showed that 11 mol % of itaconic acid and 10 mol % of 4-vinylpyridine respectively introduced within the polystyrene and poly(butyl methacrylate) matrices induced the miscibility of this pair of polymers due to specific interactions of hydrogen bonding type with partial pyridine protonation that occurred between the two copolymers as evidenced by FTIR from the appearance of two new bands at 1607 cm⁻¹ and 1640 cm⁻¹. Increasing itaconic acid content from 11 to 27 mol % led to a decrease of the intensity of the specific interactions within PSIA-27/PBM4VP blends and is attributed to both accessibility and self association effects as evidenced by DSC from the change of the shape of the Tg- composition curves and by FTIR spectroscopy. As shown from the thermogravimetric study, the presence of these specific interactions delayed the anhydride formation and improved the thermal stability of the blends.     

Phase Behaviour of Poly(styrene-co-methacrylic acid)/ Poly(styrene-co-N,N-dimethylacrylamide)/Poly(styrene-co-4-vinylpyridine) Ternary Blends by DSC and FTIR

Summary: we have investigated by DSC and FTIR the miscibility and phase behaviour of binary and ternary blends of different ratios of poly(styrene-co-methacrylic acid) containing 15 mol% of methacrylic acid (SMA15) with poly(styrene-co-N,N-dimethylacrylamide) containing 17 mol% of N,N,-dimethylacrylamide (SAD-17) and poly(styrene- co-4-vinylpyridine) containing 15 mol% of 4-vinylpyridine. SMA15 is miscible with both SAD17 and S4VP15 and interacts more strongly with S4VP15 than with SAD17 as evidenced by the positive deviations from linear average line observed with these blends and the appearance of new bands in the 1800–1550 cm⁻¹ region. This behaviour is known as ΔK effect. The FTIR study confirms that though the specific intermolecular interactions that occurred with each pair of the SMA15/S4VP15 and SMA15/SAD17 binary components are of different strength, they still exist in the ternary blend. Even though the three binary polymer pairs are individually miscible, the ternary system of SMA15/S4VP15/SAD17 exhibits only partial miscibility with small loop of immiscibility due to a significant ΔK effect. These results obtained by DSC and FTIR are in a fair agreement with theoretical prediction applying the Painter-Coleman association model.     

Investigation of Hydrogen Bonded Interpolymer Complexes Based on Poly (n-butyl methacrylate–co-methacrylic acid) and Poly (n-butyl methacrylate -co-4-vinyl pyridine). Temperature Effect

Summary: Two kinds of interpolymer complexes as soluble or precipitate of different structures were obtained in both THF and butan-2-one as common solvents by monitoring the hydrogen-bonding density within homoblends of poly(n-butyl methacrylate-co-4-vinylpyridine) (BM4VP) and poly(n-butyl methacrylate-co-methacrylic acid) (BMMA). A viscometry study confirmed such differences between these two types of interpolymer complexes from the behavior of the reduced viscosity of their blend solutions with feed blend composition. Qualitative and quantitative analyses of the interactions that occurred between these copolymers of relatively bulky side chain length containing various amounts of methacrylic acid and 4-vinylpyridine were carried out by FTIR. The fraction of associated pyridine groups to the carboxylic groups of the BMMA increases as the content of these latter increases in the BMMA/BM4VP blends. The obtained results also showed that the fractions of associated pyridine within the BMMA25/BM4VP26 blends are higher than those within BMMA18/BM4VP19 or BMMA8/BM4VP10. The FTIR analysis of a selected BMMA18/BM4VP19 1:1 ratio, carried out from 80 °C to 160 °C, above the glass transition temperatures of the two constituents of the blend, confirms the presence of strong hydrogen bonding interactions between the pyridine and the carboxylic groups within these blends even at 160 °C. A LCST is expected to occur at higher temperature as shown from the progressive decrease of the fraction of the associated pyridine.     

Self-association effects on phase behavior and thermal properties of poly(styrene-co-itaconic acid)/poly(butyl methacrylate-co-4-vinylpyridine) blends

Blends based on poly(styrene-co-itaconic acid) containing 11 or 27 mol % of itaconic acid (PSIA11, PSIA27) and poly(n-butyl methacrylate-co-4-vinylpyridine) containing 26 or 37 mol% of 4-vinylpyridine (PBM4VP26, PBM4VP37) were prepared. Their phase behavior and thermal properties were investigated by several techniques. Specific interactions that occurred between these copolymers were evidenced by FTIR from the appearance of characteristic new bands. The different T _g-composition behaviors of these systems evidenced by DSC and interpreted in terms of different types and strength of interactions that occurred within these blends, were analyzed by Kwei and “BCKV” (Brostow, Chiu, Kalogeras, Vassilikou-Dova) approaches. The positive deviation from the weight average of their constituent T _g’s, observed with the PSIA11/PBM4VP26 and PSIA11/PBM4VP37 systems, is due to the presence of strong specific interactions that occurred within this system while the practically similar S shaped curves obtained with PSIA27/PBM4VP26 and PSIA27/PBM4VP37 blends indicate that, due to self-association of carboxylic groups within PSIA27, a reduced number of efficient specific interactions occurred within these blends even though containing relatively higher amounts of interacting species. A thermogravimetric analysis confirmed improved thermal stability of these blends over the individual copolymers.     

Interpolymer complexation in hydrolysed poly(styrene-co-maleic anhydride)/poly(styrene-co-4-vinylpyridine)

Complexation between hydrolysed poly(styrene-co-maleic anhydride) (HSMA) copolymers containing 28% and 50% maleic anhydride and a poly(styrene-co-4-vinylpyridine), St4VP32 copolymer with 32% of 4-vinylpyridine content has been investigated. Formation of interpolymer complexes from 1,4-dioxane solutions is observed, over the entire composition range and the stoichiometry of these complexes has been determined from elemental analysis.Quantitative FTIR study of the system HSMA50/StV4Py32 shows that the ideal complex composition leads to 2:1 unit mole ratio of interacting component. FTIR results are in good agreement with DSC and TGA ones, since this complex composition gives the maximum value of the glass transition temperature and the best thermic stability.For the systems investigated, the T_g versus composition curve do not follow any of the commonly accepted models proposed for polymer blends. A new model proposed by Cowie [Cowie JMG, Garay MT, Lath D, McEwen IJ. Br Poly J 1989;21:81] is used to fit the T_g data and found to reproduce the experimental results more closely.     

Hydrogen Bonding Complexes of Poly(styrene-co-2-hydroxyethyl acrylate) and Poly (styrene-co-4-vinylpyridine)

Summary: Random copolymers of poly(styrene-co-4-vinylpyridine) (S4VP) and poly (styrene-co-2-hydroxyethyl acrylate) (SHEA) of different compositions were prepared and characterized. An investigation of the effects of solvent and densities of the interacting species incorporated within these copolymers showed that novel and various hydrogen bonding interpolymer complexes of different structures were elaborated when these copolymers are mixed together. The specific interactions that occurred within the SHEA copolymers and the elaborated complexes were evidenced by FTIR qualitatively from the appearance of a new band at 1604 cm⁻¹ and quantitatively using appropriate spectral curve fitting in the carbonyl and pyridine regions. The intermolecular hydrogen bonding interactions that occurred between the hydroxyl groups of the SHEA and the nitrogen atom of the pyridine groups in the S4VP are stronger than the self-associations within the SHEA. In the solid state, a DSC analysis showed that the variation of the glass transition temperatures of these materials with the composition behaved differently with the densities of interacting species and were analyzed quantitatively. A thermal stability study of the synthesized copolymers and of their different mixtures carried by thermogravimetry confirmed a similar behaviour.     

Adsorption of poly(N-isopropylacrylamide-co-4-vinylpyridine) onto core-shell poly(styrene-co-methylacrylic acid) microspheres

Adsorption of the thermoresponsive copolymer of poly(N-isopropylacrylamide-co-4-vinylpyridine) (PNIPAM-co-P4VP) onto the core-shell microspheres of poly(styrene-co-methylacrylic acid) (PS-co-PMAA) is studied. The core-shell PS-co-PMAA microspheres are synthesized by one-stage soap-free polymerization in water. The copolymer of PNIPAM-co-P4VP is synthesized by free radical polymerization of N-isopropylacrylamide and 4-vinylpyridine in the mixture of DMF and water using K₂S₂O₈ as initiator. Adsorption of PNIPAM-co-P4VP onto the core-shell PS-co-PMAA microspheres results in formation of the composite microspheres of PS/PMAA-P4VP/PNIPAM. The driven force to adsorb the copolymer of P4VP-co-PNIPAM onto the core-shell PS-co-PMAA microspheres is ascribed to hydrogen-bonding and electrostatic affinity between the P4VP and PMAA segments. The resultant composite microspheres of PS/PMAA-P4VP/PNIPAM with surface chains of PNIPAM are thermoresponsive in water and show a cloud-point temperature at about 33 °C.     

A novel synthesis of acrylic acid containing polymers

A novel synthesis of linear acrylic acid containing polymers, poly(styrene-co-acrylic acid) and poly(acrylic acid), was accomplished through hydrolysis of the respective parent polymers, i.e. poly(styrene-co-methyl acrylate) and poly(methyl acrylate), with trimethylsilyl iodide under mild conditions. Combination of ¹H NMR, ¹³C NMR, FTIR, DSC and chemical titration confirms that the conversion from methoxycarbonyl to carboxyl is almost complete. This method is further successfully applied to synthesize poly-(ethyl methacrylate-co-acrylic acid) through selective hydrolysis of the methyl acrylate units in poly(ethyl methacrylate-co-methyl acrylate).     

Study of ionomer blends based on a polyurethane cationomer and an acrylic anionomer

Polyurethane and polyurethane cationomers were synthesized using 2,3-dihydroxypyridine and 2,3-dihydroxypyridine hydrochloride as chain extenders. Poly(butyl methacrylate-co-methacrylic acid) was synthesized by free radical solution polymerization and was converted into its sodium salt. The polyurethane cationomer and the acrylic anionomer were blended in different proportions in N,N-dimethylformamide. Simple blends without ionic groups were also prepared. Miscibility enhancement in these systems was studied by means of differential scanning calorimetry and scanning electron microscopy.     

Thermal and FTIR analysis of the miscibility and phase behaviour of poly (isobutyl methacrylate-co-4-vinylpyridine)/poly (styrene-co-acrylic acid) systems

The miscibility and phase behaviour of poly (isobutyl methacrylate-co-4-vinylpyridine) containing 20 mol% of 4-vinylpyridine (IBM4VP20) and poly (styrene-co-acrylic acid) containing 27 or 32 mol% of acrylic acid (SAA27 or SAA32) mixtures were investigated by DSC, TGA and FTIR spectroscopy in the 25–180 °C temperature range. The results showed that sufficient specific carboxyl–pyridine hydrogen bonding interactions occurred between these copolymers and led to miscible blends as cast from THF and to inter-polymer complexes of significantly improved thermal stability when butan-2-one is the common solvent. The self-association effect on the inter-polymer interactions was evidenced by the decrease of complexation yields, observed when the carboxylic content is increased above 27 mol% as with SAA32.The trend of phase behaviour predicted by a thermodynamic analysis of the specific interactions of hydrogen bonding type that occurred between the two components of the SAA27/IBM4VP20 blends, neglecting the weak carboxyl–ester interactions and the functional group accessibility effect, carried out using the Painter–Coleman association model that considers the screening effects, is in a fair agreement with the experimental results. Moreover an LCST is predicted to occur at relatively high temperature.     

Preparation of amphiphilic networks by Diels-Alder reactions between oligo(butyl methacrylate) with furan end-groups and a poly(ethylene oxide-co-acetylenedicarboxylate)

A butyl methacrylate oligomer with furan end-groups was synthesized by ozonolysing a poly(butyl methacrylate-co-butadiene) latex. The end-groups of this oligomer were amidated with aminomethylfuran to give a coagulated mass of derivatized oligomers. This furan functional oligomer was then mixed with poly(ethylene oxide-co-acetylenedicarboxylate) and heated at 60°C or 125°C. The material cured at 125°C was found to contain a higher gel fraction (55 wt.-%) than that cured at 60°C (30 wt.-%).     

Site-Site Interactions in a Polymer Matrix. Functionalization of Pyridine Rings with Dibromoalkanes in Crosslinked Poly(Styrene-CO-4-Vinylpyridine)

Pyridine ring functionalization and additional crosslinking in crosslinked poly(styrene-co-4-vinylpyridine) with various dibromoalkanes depend on the chain length of the dibromoalkane, the solvent polarity, and the molar ratio between the pyridine rings and the dibromoalkane. the effect of chain length on additional crosslinking becomes more pronounced when the good swelling solvent dimethylformamide is replaced by dibromoalkane. on the other hand, the degree of crosslinking of poly(styrene-co-4-vinylpyridine) influences both the reactivity and the additional crosslinking.     

Interpolymer complexation and thermal behaviour of poly(styrene-co-maleic acid)/poly(vinyl pyrrolidone) mixtures

Polymer complexation between poly(styrene-co-maleic acid), (SMA28) and (SMA50) containing 28 and 50 mol% of maleic acid and poly(vinyl pyrrolidone) (PVP), has been investigated by differential scanning calorimeter (DSC), Fourier-transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA). All results showed that the ideal complex composition of SMA28/PVP and SMA50/PVP leads, respectively, to 2:1 and 1:1 mole ratio of interacting components.For the investigated systems, the T_g versus composition curve does not follow any of the usual proposed models for polymer blends. Withal, a new model proposed by Cowie et al. is used to fit the T_g data and it is found to reproduce the experimental results more closely. According to n and q obtained values, it seems reasonable to conclude that the inter-associated hydrogen bonds dominate in SMA28/PVP (2:1) complexes. This effect is corroborated by the FTIR study as evidenced by the high displacement of the specific bands and ionic interactions have been clearly identified. Finally, a thermogravimetric study shows that ionic interactions increase the thermal stability of these complexes.     

Stereoregularity of poly(2-vinylpyridine) and poly-(4-vinylpyridine)

In order to determine the stereoregularity of poly(4-vinylpyridine), 4-vinylpyridine-β,β-d₂ was synthesized from 4-acetylpyridine. The ¹H-NMR spectra of the deuterated and nondeuterated polymers were measured and analyzed. From the ¹H-NMR spectra of poly(4-vinylpyridine-β,β-d₂), triad tacticity can be obtained, while the ¹H-NMR spectra of nondeuterated poly(4-vinylpyridine) give the fraction of isotactic triad. The ¹³C-NMR spectra of poly(4-vinylpyridine) were also observed, and the spectra of C₄ carbon of polymers were assigned by the pentad tacticities. The fraction of isotactic triad of poly(2-vinylpyridine) and poly(4-vinylpyridine) obtained under various polymerization conditions were determined. The radical polymerization and anionic polymerizations with phenylmagnesium bromide and n-butyllithium as catalysts of 4-vinylpyridine gave atactic polymers.     

Application of FTIR Microscopy in Combinatorial Experimentation on Polymer Blends

Summary: A novel combinatorial, high-throughput experimentation (HTE) setup has been developed, which allows for rapid mapping of the phase behavior of blends of homopolymers and block copolymers. The principle is based on the preparation of composition (ϕ)-temperature (T) gradient films. Linear ϕ gradients were obtained over a large composition range, as shown by FTIR microscopy. The applicability of this combinatorial approach was demonstrated by studying the phase behavior of a poly(styrene-co-acrylonitrile) (SAN)/poly(methyl methacrylate-co-ethyl acrylate) (PMMA-EA) blend with varying EA content and a poly(styrene-b-butadiene-b-methyl methacrylate) (SBM) triblock copolymer.     

Association of copolymers of methacrylic acid and 4-vinylpyridine in comparison with an intermacromolecular complex of poly(methacrylic acid) with poly(4-vinylpyridine)

Solution properties of copolymers [C(MA-Py)x] of methacrylic acid and 4-vinylpyridine and intermacromolecular complexes of poly(methacrylic acid) (PMAA) and poly(4-vinylpyridine) (PVP) in the presence or absence of a proton-accepting water-soluble polymer such as poly(ethylene glycol) (PEG) in water/methanol mixed solvent are studied by potentiometric titration, turbidity and viscosity methods. These copolymers behave like polyampholytes and their solubilities are strongly dependent with pH changes. The pH regions where they are precipitated around their isoelectric points are narrower than those of the intermacromolecular complex of PMAA with PVP. The polyampholyte can form an intermacromolecular complex with PEG in acidic solution but this complex is soluble in the medium.     

Preparation of monodisperse polymer particles from 4-vinylpyridine

Dispersion polymerization of 4-vinylpyridine was performed by using polystyrene-block-polybutadiene as stabilizer in a mixture of N,N-dimethylformamide (DMF) and toluene to produce polymer particles. The weight ratio of the solvents affects the particle size and dispersity. In the range of DMF content from 5 to 20 wt.-%, uniform particles of a diameter of ca. 1 μm were obtained. The present system was expanded to the preparation of monodisperse particles of poly[(4-vinylpyridine)-co-(methacrylic acid)].     

Complexation of sequence-ordered methacrylic acid copolymers with poly(4-vinylpyridine)

The complexation of three kinds of sequence-ordered acid (co)polymers with a base homopolymer was studied. The acid polymers used are poly(methacrylic acid) 1 , alternating (1:1) ethylene-methacrylic acid copolymer 2 , and periodic (2:1) ethylene-methacrylic acid copolymer 3 , and the base polymer is poly(4-vinylpyridine) 4. When mixing a methanol solution of 1, 2 , or 3 with that of 4 (0.1 M of each functional group), precipitate was formed immediately for all polymer pairs. All the precipitates contained carboxyl and pyridyl groups in ca. 1:1 molar ratio and showed IR spectra indicating the hydrogen bonding between carboxyl and pyridyl groups. When mixing dilute methanol solutions (10⁻⁴M) of the above polymer pairs, no precipitation was observed, but the extinction coefficient (ϵ_B) at 255 nm of pyridyl groups in 4 was found to increase with an increasing acid polymer concentration. This is ascribed to hydrogen bonding between carboxyl and pyridyl groups in methanol. Based on the ϵ_B variation, the order of complexation constants for acid/base polymer pairs was estimated as follows: 1/4 pair ∼ 2/4 pair ≫ 3/4 pair. © 1996 John Wiley & Sons, Inc.     

A novel synthesis of linear high-molecular-weight poly(4-vinylphenol) and poly[styrene-co-(4-vinylphenol)]

A novel synthesis of linear high-molecular-weight poly(4-vinylphenol) (PVPh) and poly[styrene-co-(4-vinylphenol)] (STVPh, 2 ) via demethylation reaction is developed. The parent polymers, poly(4-methoxystyrene) and poly[styrene-co-(4-methoxystyrene)] produced by free-radical polymerization, are converted to PVPh and STVPh ( 2 ), respectively, by being treated with trimethylsilyl iodide (TMSI) at room temperature. Both ¹H NMR and ¹³C NMR data show that methoxy is completely cleaved and converted to hydroxy after hydrolysis without crosslinking and other side reactions. In addition, size-exclusion chromatography data show that no chain scission occurs during group conversion.     

Synthesis and characterization of nano-sized poly[(butyl acrylate)-co-(methyl methacrylate)-co-(methacrylic acid)] latex via differential microemulsion polymerization

Poly[(butyl acrylate)-co-(methyl methacrylate)-co-(methacrylic acid)] latex particles were synthesized via differential microemulsion polymerization. The effect of initiator type and methacrylic acid incorporation were investigated. The initiator type could significantly affect the particle size and the molecular weight of the resulting polymer and 2,2′-azobisisobutyronitrile produced the smallest particle size. The incorporation of methyl methacrylate (MAA) in the copolymer and terpolymer structures was confirmed by FTIR and NMR spectroscopy, and DSC in that the carbonyl peak of carboxylic acid at 1,700 cm^?1 in the FTIR spectrum was observed when the MAA amount was high enough, the peak areas at 0.9 ppm in the NMR spectrum confirmed the participation of MAA from the increasing proton signals and the glass transition temperature and polarity of the polymer increased when the MAA amount was increased. This supported that the MAA was incorporated into the polymer chains. MAA was found to produce a vitrification effect during the polymerization.