Synthesis and degradation of intelligent hydrogels containing polyacetal segments

Intelligent hydrogels were first obtained by copolymerization of telechelic poly(1,3-dioxolane) (pDXL) with acrylic acid, acrylamide, N-isopropylacrylamide respectively. The synthesis and characterization of the networks were discussed. The swelling behavior of the hydrogel was dependent on the solubility parameter of the solvents and hydrogels. The networks containing polyacetal segments (pDXL) can degrade by acid in different solvents. DXL and few other cycle molecules measured by GC-MS analysis were formed after degradation. According to the degradation products, the polymerization mechanism can be testified.     

Novel degradable polymer networks containing acetal components

A novel copolymer network with acetal structure was prepared using bis[4-(vinyloxy)butyl](4-methyl-1,3-phenylene)biscarbamate(BECT)as the crosslinking agent.Firstly,a tri-copolymer of maleic anhydride(MAn),n-butyl vinyl ether(BVE)and 4-hydroxybutyl vinyl ether(HBVE)was synthesized via free-radical polymerization with 2,2′-azobisisobutyronitrile as the initiator.The tri-copolymer consisted of two sorts of alternating units,MAn-alt-BVE and MAn-alt-HBVE.The linear copolymer Poly((MAn-alt-BVE)-co-(MAn-alt-HBVE)...     

Synthesis of degradable model networks via ATRP and click chemistry

A simple scheme involving atom transfer radical polymerization (ATRP) from a bifunctional initiator, conversion of the bromine end groups of the resulting telechelic polymer to azides, and cross-linking of this azido-telechelic macromonomer with multi-acetylene functionalized small molecules via copper-catalyzed azide-alkyne cycloaddition was employed to prepare the first tert-butyl acrylate model networks. This general scheme is wide in scope, enabling synthesis of model networks possessing defined pore size from any monomer polymerizable by ATRP. Introduction of an olefin moiety into the ATRP initiator enabled degradation of the materials by ozonolysis to yield star polymer products bearing three or four arms depending on which cross-linker was employed in the parent network. Size-exclusion chromatography of the ozonolysis products confirmed the pore size of the parent network and yielded insight into the number of unreacted functionalities. Model networks derived from a trifunctional alkyne were found to be more completely cross-linked than those derived from a tetrafunctional alkyne, presumably due to less steric hindrance in the former system.     

Synthesis of molecular imprinted polymer networks

Summary The article covers the methods that are currently available for the preparation of molecularly imprinted polymers. The disadvantages of the conventional grinding of bulk polymerized blocks of imprinted polymer are first identified. The newer methods are divided into four sections: suspension polymerization; modified surfaces; polymer colloids and finally miscellaneous techniques such as the use of linear polymers. Each alternative method is compared with the grinding method and the relative advantages and disadvantages identified. Presented at: Affinity Chromatography Conference, Cambridge, UK, July 1–3, 1997 An erratum to this article is available at .     

Thermolyzable polymer networks and star polymers containing a novel,compact, degradable acylal‐based dimethacrylate cross‐linker: Synthesis,characterization, and thermolysis

A compact, cleavable acylal dimethacrylate cross‐linker, 1,1‐ethylenediol dimethacrylate (EDDMA), was synthesized from the anhydrous iron(III) chloride‐catalyzed reaction between methacrylic anhydride and acetaldehyde. The ability of EDDMA to act as cross‐linker was demonstrated by using it for the preparation of one neat cross‐linker network, four star polymers of methyl methacrylate (MMA), and four randomly cross‐linked MMA polymer networks using group transfer polymerization (GTP). For comparison, the corresponding polymer structures based on the commercially available ethylene glycol dimethacrylate (EGDMA) cross‐linker (isomer of EDDMA) were also prepared via GTP. The number of arms of the EDDMA‐based star polymers was lower than that of the corresponding EGDMA polymers, whereas the degrees of swelling in tetrahydrofuran of the EDDMA‐based MMA networks were higher than those of their EGDMA‐based counterparts. Although none of the EDDMA‐containing polymers could be cleanly hydrolyzed under basic or acidic conditions, they could be thermolyzed at 200 °C within 1 day giving lower molecular weight products. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5811–5823, 2007     

The performance of degradable polymer bags

The use of degradable polymers for the collection and composting of organic wastes is explored within this paper. With reference to one trial where the performance of a ‘degradable’ polyethylene based sack for the kerbside collection of organic wastes was investigated. Areas for consideration were the impacts of the degradable polymer on the composting process and the quality of the finished product. This trial also included a comparative study of two different types of ‘degradable’ polymer sacks currently on the European market (polyethylene and starch). A number of quantitative tests were conducted on the different polymers to assess the mechanisms of degradation and how this affected their suitability for the treatment of organic wastes. Provisional results have indicated that the polyethylene (PE) sacks are not degrading as anticipated within open windrow conditions, adversely affecting both the composting process and the quality of the finished compost product. Whilst the degradable starch based sacks appear to actively degrade within open windrow compost conditions.     

Double-stimuli-responsive degradable hydrogels: interpenetrating polymer networks consisting of gelatin and dextran with different phase separation

Biodegradable interpenetrating polymer network (IPN)-structured hydrogels consisting of gelatin (Gtn) and dextran (Dex) were prepared by sequential crosslinking reactions of Gtn and methacryloylated Dex. Phase separation of these hydrogels is dominated by preparation conditions, i.e., above or below the sol-gel transition temperature (T_trans) of Gtn. Enzymatic degradation by either α-chymotrypsin or dextranase is hindered for the IPN-structured hydrogel prepared below T_trans whereas this hydrogel is perfectly degradable in the presence of both enzymes. Such a specific feature of enzymatic degradation was not observed for the hydrogel prepared above T_trans. These results suggest that double-stimuli-responsive degradation of IPN-structured hydrogels is related to their phase separation.     

Synthesis and characterization of graft copolymers containing polystyrene and liquid-crystalline segments

The synthesis and characterization of novel graft copolymers containing side-chain liquid-crystalline backbones and polystyrene grafts are described. The liquid-crystalline behaviour and the phase separation are examined with respect to the molecular weight of the grafts and the composition of the graft copolymers.     

Deformation behavior of polymer networks containing or interacting with a solvent

General formalism to describe both equilibrium and nonequilibrium states of polymer networks containing a solvent or interacting with the solvent medium is proposed. Two classes of problems have been formulated. It is necessary to determine the stress-strain state of an inhomogeneously swollen material in one case and that of a statically loaded material occurring in thermodynamic equilibrium with the solvent in the other case. The state of the swollen material is characterized in terms of the global mechanical stress tensor and the solvent chemical potential. In the case of incompressible material and liquid, an osmotic stress tensor is introduced. A method for deriving physical expressions for the mechanical stress tensor, the chemical potential, and the osmotic stress tensor is proposed on the basis of the known free energy relations that follow from different theories of rubber elasticity. The efficacy of the general formalism is demonstrated using particular examples in which the deformation behavior and the equilibrium swelling of mechanically loaded polymer networks are considered.     

Synthesis, processing and properties of conjugated polymer networks

Despite the diverse research activities focused on the chemistry, materials science and physics of conjugated polymers, the feature of conjugated cross-links, which can provide electronic communication between chains, has received little attention. This situation may be a direct consequence of the challenge to introduce such links while retaining adequate processability. Focusing on recent studies of materials for which charge transport or electrical conductivity data are available, this feature article attempts to present an overview of the synthesis, processing and electronic properties of conjugated polymer networks. For the purpose of this discussion, two distinctly separate architectures-featuring covalent cross-links on the one hand and non-covalent organometallic bridges on the other-are treated in separate sections. The available data indicate that cross-linking can have significant benefits for intermolecular charge transfer if the polymers are carefully designed.     

Polyfluorenes containing tetraphenylthiophene segments: Synthesis,photophysics, and electroluminescence

2,5‐Bis(4‐bromophenyl)‐3,4‐diphenylthiophene was synthesized from benzyl chloride and sulfur and through the subsequent bromination of the intermediate 2,3,4,5‐tetraphenylthiophene. It was condensed with 2,7‐dibromo‐9,9‐dihexylfluorene via a nickel‐mediated Yamamoto coupling reaction to afford a new series of statistical copolymers with various compositions. In addition, poly(9,9‐dihexylfluorene) (PF) was synthesized under the same conditions for comparison. All the polymers were soluble in common organic solvents such as tetrahydrofuran (THF), chloroform, and dichloromethane. Their glass‐transition temperatures increased with an increase in the tetraphenylthiophene (TPT) content in the polymers, and they were 63–149 °C. The solutions of the polymers in THF emitted intense blue light with a photoluminescence maximum at 418–440 nm and quantum yields of 0.32–0.62. Thin films of the polymers with TPT fractions lower than 20 mol % emitted blue‐green light with two well‐resolved peaks at 445 and 520 nm and an optical band gap of about 2.85 eV. A thin film of the polymer with aTPT fraction of 50 mol % emitted pure blue light with a maximum at 419 nm and an optical band gap of 3.28 eV. An enhancement of the light‐emitting‐diode brightness by a factor of ～8 with respect to that of PF was achieved in apolymer containing 5 mol % TPT. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4015–4026, 2006     

Synthesis of dendronized polymer brushes containing metallo‐supramolecular polymer side chains

A new kind of dendronized polymer brush with metallo‐supramolecular polymer side chains was fabricated by a combination of macromonomer and graft‐to approach. The alternating copolymers of maleic anhydride and styryl macromonomers pendant with Fréchet‐type dendrons of three generations were reported previously. In this article, terpyridine groups were introduced along the backbone of the dendronized polymers through the amidolysis of anhydride groups. The terpyridine functionalized PEO linear chains were then incorporated through the complexation of terpyridine and Ru(II) ion. Thus, dendronized polymer brushes with amphiphilic properties were synthesized. AFM analysis showed worm‐like single molecular morphologies of the polymers of three generations, and ¹H NMR analysis indicated that such molecular brushes had an amphiphilic nature in solution. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3303–3310, 2007     

Synthesis and characterization of novel degradable photocrosslinked poly(ether‐anhydride) networks

New degradable poly(ether‐anhydride) networks were synthesized by UV photopolymerization. Dicarboxylated poly(ethylene glycol) (PEG) or poly(tetramethylene glycol) (PTMG) was reacted with an excess of methacrylic anhydride to form dimethacrylated macromers containing anhydride linkages. The percent of conversion for the macromer formation was more than 80% at 60 °C after 24 h. ¹H NMR and IR spectroscopies show the presence of anhydride linkages in the macromer. In vitro degradation studies were carried out at 37 °C in PBS with crosslinked polymer networks formed by UV irradiation. All PEG‐based polymers degraded within 2 days, while PTMG‐based polymers degraded by 50% of the initial weight after 14 days. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1277–1282, 2000     

Synthesis and applications of novel fluoroalkyl end‐capped cooligomers containing diphenylacetylene segments: a new approach to the surface arrangement of diphenylacetylene segments on the traditional organic polymer

Fluoroalkyl end‐capped cooligomers containing diphenylacetylene segments [R_F‐(DPMA)_x‐(Co‐M)_y‐R_F] were prepared by reaction of fluoroalkanoyl peroxide with 4‐(phenylethynyl)phenyl methacrylate (DPMA) and radical polymerizable comonomers such as N,N‐dimethylacrylamide (DMAA) and acryloylmorpholine (ACMO) under very mild conditions. Fluorinated cooligomers containing diphenylacetylene segments thus obtained exhibited a good solubility in a variety of organic solvents. These fluorinated cooligomers were also applied to the surface modification of traditional organic polymers such as poly(methyl methacrylate) (PMMA) to exhibit not only a good surface active property imparted by fluorine but also a fluorescent characteristic related to diphenylacetylene segments on their surface. In addition, these fluorinated cooligomers could form the nanometer size‐controlled fluorinated molecular aggregates in chloroform. Interestingly, some benzenes and biphenyl (BP) derivatives could interact with these fluorinated oligomeric aggregates as guest molecules, and in particular 2‐chloro‐5‐nitrobenzotrifluoride (CNB) was most effective for enhancing the fluorescent intensity of these guest molecules. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis of thermally degradable epoxy adhesives

We have developed a new strategy for the synthesis of epoxide‐containing polymers where the pendant reactive groups are connected to the main backbone via thermally labile oxonorbornene groups. The polymers were synthesized by radical 1,4‐polymerization of the appropriate bicyclic diene monomer. The produced polymers can be crosslinked in the presence of a diamine and de‐crosslinked by thermal treatment at 160 °C, which induces retro‐Diels–Alder reaction and cleaves pendant groups from the polymer backbone, as confirmed by differential scanning calorimetry. The potential for the utilization of this polymer as a thermally removable adhesive was demonstrated by a simple adhesion test. This method provides access to thermally cleavable epoxy networks that can be quickly and irreversibly disintegrated into nonvolatile components upon heating to a specified temperature. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4992–4997     

Synthesis and characterization of interpenetrating polymer networks for nonlinear optics

Two-component simultaneous interpenetrating networks (IPN) of thepoly(4′-[[2-(methylacryloxy)ethyl]ethylamino]-4-nitroazobenzene-co-methyl meth-acrylate) (PDR1MA-co-MMA)/poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) system, the PDR1MA/PPO system and 4′-[[2-(acetoxy)ethyl]ethylamino]-4-nitroazo benzene (ACDR1) doped MMA/PPO system were synthesized and characterized. As studied by differential scanning calorimetry (DSC) the full IPNs of the PDR1MA-co-MMA/PPO system and the PDR1MA/PPO system showed a single T_g varying with the PPO composition. A single-phase morphology of the full IPNs was also indicated by scanning electron microscopy (SEM). Transparent films were cast onto clean microscopic glass slides and poled at 190°C for 1 h. The UV-VIS absorption spectra of the three IPN systems before and after curing and corona poling showed a shift in the maximum absorption due to the induced alignment of the nonlinear optical chromophores in the IPN systems. The absorption intensity of the full IPNs remained same after heating at 120°C for 72 h, indicating that the electric field-induced alignment is stable in the full IPN materials. Preliminary second harmonic generation (SHG) data on these IPNs are presented. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 553–561, 1998