Self-assembled,wormlike-cylinder network of polystyrene-block-poly(ethylene oxide) micelles in solution

We report the formation of a highly entangled and interconnected, self-assembled, wormlike-cylinder network of polystyrene-block-poly(ethylene oxide) in N, N-dimethylformamide/water. In this system, N,N-dimethylformamide was a common solvent and water was a selective solvent for the poly(ethylene oxide) blocks. The degrees of polymerization of the polystyrene and poly(ethylene oxide) blocks were 962 and 227, respectively. The network was formed at copolymer concentrations higher than 0.4 wt % and consisted of self-assembled, wormlike cylinders that were interconnected by Y-shaped, T-shaped, and multiple junctions. The network morphology was visualized with transmission electron microscopy. Capillary viscometry measurements revealed an order-of-magnitude increase in the inherent viscosity of the colloidal system upon the formation of the network. A similar effort to obtain a wormlike-cylinder network in an N,N-dimethylformamide/acetonitrile system, in which acetonitrile was a selective solvent for the poly(ethylene oxide) blocks, was unsuccessful even at high copolymer concentrations; instead, the wormlike cylinders showed a tendency to align. The viscosity measurements also did not show a substantial increase in the inherent viscosity. Thus, the solvent played a critical role in determining the formation of the self-assembled, wormlike-cylinder network. This formation of the network resulted from an interplay between the end-capping energy, bending energy (curvature), and configurational entropy of the self-assembled, wormlike-cylinder micelles that minimized the free energy. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3605–3611, 2006     

Temperature-induced reversible morphological changes of polystyrene-block-poly(ethylene oxide) micelles in solution

Temperature-induced reversible morphological changes of polystyrene-block-poly(ethylene oxide) micelles with degrees of polymerization of 962 for the PS and 227 for the PEO blocks (PS962-b-PEO227) in N,N-dimethylformamide (DMF)/water, in which water is a selective solvent for the PEO block, were observed. For a system with 0.2 wt % copolymer concentration and 4.5 wt % water concentration in DMF/water, the micelle morphology observed in transmission electron microscopy changed from vesicles at room temperature to worm-like cylinders and then to spheres with increasing temperature. Mixed morphologies were also formed in the intermediate temperature regions. Cooling the system back to room temperature regenerated the vesicle morphology, indicating that the morphological changes were reversible. No hysteresis was observed in the morphological changes during heating and cooling. Dynamic light scattering revealed that the hydrodynamic radius of the micelles decreased with increasing temperature. Combined static and dynamic light scattering results supported the change in morphology with temperature. The critical micellization temperatures and critical morphological transition temperatures were determined by turbidity measurements and were found to be dependent on the copolymer and water concentrations in the DMF/water system. The morphological changes were only possible if the water concentration in the DMF/water system was low, or else the mobility of the PS blocks would be severely restricted. The driving force for these morphological changes was understood to be mainly a reduction in the free energy of the corona and a minor reduction in the free energy of the interface. Morphological observations at different time periods of isothermal experiments indicated that in the pathway from one equilibrium morphology to another, large compound micelles formed as an intermediate or metastable stage.     

Morphology of hybrid polystyrene-block-poly(ethylene oxide) micelles: analytical ultracentrifugation and SANS studies

Morphology and structure of aqueous block copolymer solutions based on polystyrene-block-poly(ethylene oxide) (PS-b-PEO) of two different compositions, a cationic surfactant, cetyl pyridinium chloride (CPC), and either platinic acid (H2PtCl6.6H2O) or Pt nanoparticles were studied using a combination of analytical ultracentrifugation (AUC), transmission electron microscopy (TEM), and small angle neutron scattering (SANS). These studies combining methods contributing supplemental and analogous structural information allowed us to comprehensively characterize the complex hybrid systems and to discover an isotope effect when H2O was replaced with D2O. In particular, TEM shows formation of both micelles and larger aggregates after incorporation of platinic acid, yet the amount of aggregates depends on the H2PtCl6.6H2O concentration. AUC reveals the presence of micelles and micellar clusters in the PS-b-PEO block copolymers solution and even larger (supermicellar) aggregates in hybrids (with CPC). Conversely, SANS applied to D2O solutions of the similar species indicates that micelles are spherical and no other micellar species are found in block copolymer solutions. To reconcile the SANS and AUC data, we carried out AUC examination of the corresponding D2O block copolymer solutions. These measurements demonstrate a pronounced isotope effect on micelle aggregation and micelle size, i.e., no micelle aggregation in D2O solutions, revealing good agreement of AUC and SANS data.     

Reversible aggregation of polystyrene-block-poly(2-vinylpyridine)-block-poly(ethylene oxide) block copolymer micelles in acidic aqueous Solutions

Micelles of polystyrene-block-poly(2-vinylpyridine)-block-poly(ethylene oxide) (PS-PVP-PEO) were studied in acidic aqueous solutions by static and dynamic light scattering, alkalimetric titration, fluorescence correlation spectroscopy, and after deposition on a mica surface by atomic force microscopy. The PS-PVP-PEO micelles prepared by dialysis in ternary 1,4-dioxane-methanol-acidic water mixtures have a very low association number and show a strong tendency to form aggregates. The aggregation, which is promoted at low pH, seems to be fully reversible. Possible mechanisms of the aggregation are discussed. Atomic force microscopy scans of PS-PVP-PEO micelles deposited on a mica surface reveal the formation of micellar aggregates and support the general concept of aggregation upon changes in conditions and deterioration of the stability of small micelles.     

Structure and ordering kinetics of micelles in triblock copolymer solutions in selective solvents

We have used small-angle x-ray scattering (SAXS), and small-angle neutron scattering (SANS) to study the micelle structure of a polystyrene-block-poly(ethene-co-butene)-block-polystyrene triblock copolymer in dilute - semidilute solutions in solvents selective for either the outer styrene block (dioxane) or for the middle block (heptane or tetradecane). Measurements of equilibrium structure factors showed that micelles were formed in both types of selective solvents. In the case of dioxane, the micelles are isolated whereas in the case of heptane or tetradecane, a bridged micellar structure may be formed at higher copolymer concentrations. In both cases we observed an ordered cubic structure of insoluble domains (micellar cores) at high concentrations (> 8 %). The micellar scattering function was fit to the Percus-Yevick interacting hard-sphere model. The temperature dependence of the core radius, the hard-sphere interaction radius and the volume fraction of hard spheres were obtained. We also used synchrotron-based time-resolved SAXS to examine the kinetics of ordering of the micelles on a cubic lattice for many different temperature jumps into the ordered cubic phase starting from the disordered micellar fluid phase in different solvents at different concentrations. The time evolution of the structure changes was determined by fitting the data with Gaussians to describe the structure factor of the ordered Bragg peaks and the Percus-Yevick structure factor was used to describe the micellar fluid. The time dependence of the peak intensities and widths as well as of the micellar parameters will be presented. The results showing the kinetics of the transformation from the fluid to the ordered phase were analyzed using the Mehl-Johnson-Avrami theory of nucleation.     

Loading and release mechanisms of a biocide in polystyrene-block-poly(acrylic acid) block copolymer micelles

The kinetics of loading of polystyrene197-block-poly(acrylic acid)47 (PS197-b-PAA47) micelles, suspended in water, with thiocyanomethylthiobenzothiazole biocide and its subsequent release were investigated. Loading of the micelles was found to be a two-step process. First, the surface of the PS core of the micelles is saturated with biocide, with a rate determined by the transfer of solid biocide to micelles during transient micelle-biocide contacts. Next, the biocide penetrates as a front into the micelles, lowering the Tg in the process (non-Fickian case II diffusion). The slow rate of release is governed by the height of the energy barrier that a biocide molecule must overcome to pass from PS into water, resulting in a uniform biocide concentration within the micelle, until Tg is increased to the point that diffusion inside the micelles becomes very slow. Maximum loading of biocide into micelles is approximately 30% (w/w) and is achieved in 1 h. From partition experiments, it can be concluded that the biocide has a similar preference for polystyrene as for ethylbenzene over water, implying that the maximum loading is governed by thermodynamics.     

A theory of swollen hollow micelles of diblock copolymers in selective solvents

Micellization behavior of diblock copolymers in selective solvent near the critical micelle temperature (c.m.t.) is theoretically studied focusing our attention to that the core must be swollen with the solvent near c.m.t. Supposing a micellar solution of core–corona type spherical micelles with swollen hollow cores, we calculate the association number distribution and the micelle structure at equilibrium in terms of controlling parameters, i.e. intrinsic interfacial tensions (γ_eff0 and γ_AS0) for core/corona and core/solvent interfaces, and core-segment/solvent interaction parameter χ_AS. Infinitely-large micelle region (ILM-Region), where the micelle size is divergent, is found at smaller values of γ_AS0 and χ_AS other than micelle and unimer regions. In the micelle region near ILM-Region, the micelle size and the degree of swelling become extremely large as ILM-Region is approached, while the micelles become very compact far away from ILM-Region. By investigating the micellar behavior with increasing the association strength on a particular trace in the χ_AS−γ_eff0−γ_AS0 space, it is demonstrated that large swollen hollow micelles are easily formed near c.m.t., and then sharply change to be more compact micelles with decreasing solvent quality to core blocks. This is exactly similar to the so-called anomalous micellization experimentally observed near c.m.t.     

Interpolymer complexes based on the core/shell micelles. interaction of polystyrene-block-poly(methacrylic acid) micelles with linear poly(2-vinylpyridine) in 1,4-dioxane water mixtures and in aqueous media

The size and structural changes of nanoparticles formed after the addition of poly(2-vinylpyridine), PVP, to block copolymer micelles of polystyrene-block-poly(methacrylic acid), PS-PMA, were studied by light scattering and atomic force microscopy. Due to the strong hydrogen bonding between PVP and PMA segments, complex structures based on the core/shell micelles form in mixed selective solvents. As proven by a combination of light scattering and atomic force microscopy, individual PS-PMA micelles are "glued" together by PVP chains. The dialysis against solvents with a high content of water results in transient increase in polydispersity and turbidity of originally clear solutions. However, the precipitated polymer material dissolves in basic buffers and stable soluble nanoparticles reform in aqueous media. The behavior of their solutions was studied in a broad pH range by light scattering, atomic force microscopy and capillary zone electrophoresis.     

AFM study of micelle chaining in surface films of polystyrene-block-poly(ethylene oxide) stars at the air/water interface

A series of three-arm star block copolymers were examined using atomic force microscopy (AFM). These stars consisted of a polystyrene core composed of ca. 111 styrene units/branch with poly(ethylene oxide) (PEO) chains at the star periphery. Each star contained different amounts of PEO, varying from 107 to 415 ethylene oxide units/branch. The stars were spread as thin films at the air/water interface on a Langmuir trough and transferred onto mica at various surface pressures. Circular domains representing 2D micelle-like aggregated molecules were observed at low pressures. Upon further compression, these domains underwent additional aggregation in a systematic manner, including micellar chaining. At this point, domain area and the number of molecules/domain increased with increasing pressure. In addition, it was found that longer PEO chains led to greater intermolecular separation and less aggregation. These AFM results correspond to attributes seen in the surface pressure-area isotherms of the stars. In addition, they demonstrate the viability of AFM as a quantitative characterization technique.     

Effect of water content on the size and membrane thickness of polystyrene-block-poly(ethylene oxide) vesicles

The asymmetric amphiphilic block copolymer polystyrene962-block-poly(ethylene oxide)227(PS962-b-PEO227) canforms micelles with N, N-dimethylformamide(DMF) as co-solvent and water as selected solvent, and when the water content of the mixed solvent is higher than 4.5 wt%, the vesicle will be dominated. This work finds that once vesicles are formed in the DMF-water mixed solvent, the vesicle size and membrane thickness can be tuned by further increasing water content. As the water fraction elevated from 4.8 wt% to 13.0 wt%, the vesicle size dercreases from 246 nm to 150 nm, while the membrane thickness increases from 28 nm to 42 nm. In addition, the block copolymer packing and the free energy are analyzed as the vesicle size becomes small and the membrane becomes thick.     

Conformational transition of the core chain in radiation-modified polysilane micelles formed in selective solvents

Poly(methyl acrylate)-grafted poly(methyl-n-propylsilane) (PMPrS-g-PMA) and poly(acrylic acid)-grafted PMPrS (PMPrS-g-PAA) were synthesized by gamma-ray-induced graft polymerization, and the association behavior of these graft copolymers was investigated in selective solvents composed of good and poor solvents for the PMPrS main chain. Fluorescence spectroscopy with perylene as a fluorescent probe revealed that PMPrS-g-PAA in a water/THF mixed solvent self-assembles into micelles with a swollen core of PMPrS chains in the water content range of 50-95%. UV spectroscopy demonstrated that a further increase of the water content gives rise to the conformational transition of the PMPrS chains in the micelle core from the random conformation to the conformation that corresponds to that in the solid state at a water content of ca. 95%, independent of the grafting yield. Similar behavior was also observed in DMSO/THF solutions of PMPrS-g-PMA, for which the conformational transition occurred at the constant DMSO content of ca. 95%. These results indicate that solvatochromic behavior of polysilane, which is a characteristic feature of polysilane, proved to provide information on the inner structure of those micelles: PMPrS chains in the core undergo conformational transition as the content of the poor solvents for PMPrS increases, while maintaining the micelle structure.     

Solvent relaxation study of pH-dependent hydration of poly(oxyethylene) shells in polystyrene-block-poly(2-vinylpyridine)-block-poly(oxyethylene) micelles in aqueous solutions

The hydration of the poly(oxyethylene) shell in polystyrene-block-poly(2-vinylpyridine)-block-poly(oxyethylene) micelles was investigated by monitoring the solvent relaxation response of a solvent-sensitive fluorophore (patman). It has been found that the relaxation occurs on the nanosecond time scale. Results for triblock copolymer micelles have been compared with those obtained for polystyrene-block-poly(2-vinylpyridine) micelles in order to evaluate the effect of the outer polyoxyethylene layer. Considerable pH-dependent changes in the hydration of poly(oxyethylene) units at the poly(2-vinylpyridine)/polyoxyethylene interface were observed. Additionally, the paper shows that the solvent relaxation technique is a suitable tool for studying polymeric nanoparticles and that the measurement of time-dependent half-width of the emission spectrum allows for estimation of the extent of relaxation process observed by a given experimental setup.     

Structural evolution of multicompartment micelles self-assembled from linear ABC triblock copolymer in selective solvents

Using dissipative particle dynamics simulation, structural evolution from concentric multicompartment micelles to raspberry-like multicompartment micelles self-assembled from linear ABC triblock copolymers in selective solvents was investigated. The structural transformation from concentric micelles to raspberry-like micelles can be controlled by changing either the length of B blocks or the solubility of B block. It was found that the structures with B bumps on C surface (B-bump-C) are formed at shorter B block length and the structures with C bumps on B surface (C-bump-B) are formed at relative lower solubility of B blocks. The formation of B-bump-C is entropy-driven, while the formation of C-bump-B is enthalpy-dominated. Furthermore, when the length of C blocks is much lower than that of B blocks, an inner-penetrating vesicle was discovered. The results gained through the simulations provide an insight into the mechanism behind the formation of raspberry-like micelles.     

Hydrolytic degradation of poly(ethylene oxide)-block-polycaprolactone worm micelles

Spherical micelles and nanoparticles made with degradable polymers have been of great interest for therapeutic application, but degradation-induced changes in a spherical morphology can be subtle and mechanism/kinetics appears poorly understood. Here, we report the first preparation of giant and flexible worm micelles self-assembled from degradable copolymer poly(ethylene oxide)-block-polycaprolactone. Such worm micelles spontaneously shorten to generate spherical micelles, triggered by polycaprolactone hydrolysis, with distinct mechanism and kinetics from that which occurs in bulk material.     

The influence of ethylene glycol chains on the thermodynamics of hydrogen-bonded supramolecular assemblies in apolar solvents

Substitution of hydrogen bond directed supramolecular assemblies with ethylene glycol chains leads to a reduction in the association constant in apolar solvents, where the reduction of the association constant is dependent on the length of the aliphatic spacer connecting the hydrogen bonds and the ethylene glycol chain.     

Poly(ethylene glycol)-lipase complexes catalytically active in fluorous solvents

Lipase-catalyzed alcoholysis between vinyl cinnamate and benzyl alcohol in fluorous solvents was investigated. This is the first report of a lipase-catalyzed reaction in a fluorous solvent. Forming the poly(ethylene glycol)(PEG)-lipase PL complex enhanced lipase activity over 16-fold over that of native lipase powder. The PEG-lipase PL complex exhibited markedly higher alcoholysis activities in fluorous solvents than in conventional organic solvents such as isooctane and n-hexane. The optimum reaction temperature for FC-77 (perfluorooctane) was 55 [degree]C and the optimum pH for the preparation of the PEG-lipase complex was 9.0; similar to the conditions for lipase PL-catalyzed reaction in aqueous solution. The alcoholysis reaction in fluorous solvent requires the addition of a FC77-miscible organic solvent (isooctane) in order to dissolve non-fluorinated substrates. Lipase activity in the fluorous solvent was significantly influenced by the volume ratio of isooctane in the reaction medium. Vinyl cinnamate inhibition of the lipase-catalyzed reaction occurred at a much lower concentration in the fluorous solvent than in isooctane. These results can be explained by the localization of substrates around lipase molecules, induced by adsorption of the substrates to the PEG layer of the PEG-lipase complex.     

An investigation of the structure of micelles formed by a polystyrene-b-poly(ethylene/propylene) block copolymer in paraffinic solvents using 1H and 13C-nuclear magnetic resonance

The dynamic structure of micelles formed by a polystyrene-b-poly(ethylene/propylene) block copolymer in paraffinic solvents has been studied by electron microscopy, photon correlation spectroscopy and ¹H and ¹³C-nuclear magnetic resonance. In n-octane below 50°, the polystyrene core has two components, a “rigid” component exhibiting the same NMR linewidth as bulk glassy polystyrene and a “mobile” component attributed to a plasticised surface layer. The “rigid” component undergoes a sharp linewidth transition at 50° attributed to segmental motions. In n-octane, the micelles dissociate significantly above 80°. In higher alkanes, the dissociation occurs at increasing temperature with increasing solvent molecular weight.     

Methoxy poly(ethylene glycol)-b-poly(valerolactone) diblock polymeric micelles for enhanced encapsulation and protection of camptothecin

Amphiphilic block copolymers, methoxy poly(ethylene glycol)-b-poly(valerolactone) (mPEG-b-PVL), were synthesized via ring opening polymerization of δ-valerolactone in the presence of methoxy poly(ethylene glycol) (mPEG). The copolymers form micelle-like nanoparticles by their amphiphilic characteristics and their structures were examined by Nuclear Magnetic Resonance (NMR). The sizes of nanoparticles ranged from 60 to 120 nm as measured by dynamic light scattering detection, and were larger with higher molecular weight of the copolymers. The Critical Micelle Concentration (CMC) of these nanoparticles in water decreased with increasing molecular weight of hydrophobic segment. Stability analysis showed that the micellar solutions maintain their sizes at 37 °C for six weeks without aggregation or dissociation. The lyophilization method was better than the evaporation method when camptothecin (CPT) was incorporated to the micelles. The former method yielded higher CPT loading efficiency and lower aggregation. The loading efficiency of CPT could be more than 96% and a steady release rate of CPT was kept for twenty six days. Moreover, the mPEG-b-PVL polymeric micelles offered good protection of CPT lactone form at 37 °C for sixteen days. The copolymers showed no cytotoxicity towards L929 mouse muscular cells when incubated for one day. Taken together, the mPEG-b-PVL copolymer has potential to be used for the delivery of CPT or other similar drugs.