Chain transfer by addition-fragmentation mechanism. VII. Radical polymerization of vinyl monomers in the presence of ethyl 2-[1-(trimethylsilylperoxy)ethyl]propenoate and related compounds

Ethyl 2-[1-(trimethylsilylperoxy)ethyl]propenoate 1 , ethyl 2-[1-(dimethylvinylsilylperoxy)-ethyl]propenoate 2 , ethyl 2-[1-(1-(2-ethoxycarbonyl-1-methyl-2-propenylperoxysilyl)-1-methylethylperoxy)ethyl]propenoate 3 , and 2-phenyl-2-trimethylsilylperoxypropane 4 were synthesized and added to the free radical polymerization of vinylic monomers. 1 and 2 were found to show no homopolymerizability but act as effective chain transfer reagents in radical polymerizations of methyl methacrylate (MMA), styrene (St), and n-butyl acrylate (BA). The estimated chain transfer constants (C_tr) are as follows: C_tr ( 1 ) = 0.15 for MMA, 0.90 for St, and 2.03 for BA at 60°C; C_tr ( 2 ) = 0.12 for MMA, 1.16 for St, and 1.9 for BA at 60°C. ¹H–NMR spectra of poly(St) formed in the presence of 1 is consistent with the view that the polymers bear an oxirane at one terminal and an trimethylsilyloxy fragment at the other end. Moreover, peroxysilane 4 showed very low transfer properties by direct homolytic substitution (SH₂). These findings indicate that the ethyl 2-[1-(substituted dimethylsilylperoxy)ethyl]-propenoates 1–3 undergo chain transfer reaction via a intramolecular homolytic substitution (SHi) following an addition process. Preparation of poly(styrene) up to high conversion in the presence of 3 yielded to the formation of the corresponding polymeric structures bearing hydrolysable C(SINGLE BOND)O(SINGLE BOND)Si(SINGLE BOND)O(SINGLE BOND)C bonds. © 1996 John Wiley & Sons, Inc.     

Synthesis of perfectly bifunctional polyacrylates by single‐electron‐transfer living radical polymerization

Poly(methyl acrylate)s, poly(ethyl acrylate)s, and poly(butyl acrylate)s with α,ω‐di(bromo) chain ends and M_n from 8500 to 35,000 were synthesized by single‐electron‐transfer living radical polymerization (SET‐LRP). The analysis of their chain ends by a combination of ¹H and 2D‐NMR, GPC, MALDI‐TOF MS, chain end functionalization, chain extension, and halogen exchange experiments demonstrated the synthesis of perfectly bifunctional polyacrylates by SET‐LRP. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4684–4695, 2007     

Formation of hyperbranched polymers in atom transfer radical copolymerization of MMA and DVB

Hyperbranched poly(methyl methacrylate)s (HPMMAs) have been successfully prepared by atom transfer radical copolymerization of MMA and divinylbenzene (DVB). Kinetic study shows complete consumption of the initiator in 0.5 h, and relatively low polymerization rate when DVB content in the feed was high. By analyzing MALDI-TOF spectra of the resulting copolymers, the linear A _n B* (n = 0, 1, 2, 3) oligomers were formed in 0.5 h of polymerization, and then the oligomers reacted each other to form dimers, further reactions produced HPMMA. The SEC and NMR spectroscopies were used to trace the polymerization, and the results demonstrate that small amount of the branching reactions occur in the initial polymerization, and the branched polymers are significantly generated past a certain conversion depending upon the feed ratios. Raising the content of DVB in the monomer mixture can increase the pendent vinyl groups of the linear oligo-inimers, leading to gelation at low MMA conversion.     

Addition–fragmentation chain transfer: Molecular weight distributions and retardation in the system methyl methacrylate/methyl α‐(bromomethyl)acrylate

A detailed investigation of addition–fragmentation chain transfer (AFCT) in the free‐radical polymerization of methyl methacrylate (MMA) in the presence of methyl α‐(bromomethyl)acrylate (MBMA) was carried out to elucidate mechanistic details with efficient macromonomer synthesis as an underlying goal. Advanced modeling techniques were used in connection with the experimental work. Curve fitting of simulated and experimental molecular weight distributions with respect to the rate coefficient for addition of propagating radicals to MBMA (k_add) over 60–120 °C resulted in E_add = 21.7 kJ mol^?1 and A_add = 2.18 × 10⁶ M^?1 s^?1 and a very weak temperature dependence of the chain‐transfer constant (E_add ≈ E_p). The rate coefficient for fragmentation of adduct radicals at 60 °C was estimated as k_f ≈ 39 s^?1 on the basis of experimental data of the MMA conversion and the concentration of 2‐carbomethoxy‐2‐propenyl end groups. The approach developed is generic and can be applied to any AFCT system in which copolymerization does not occur and in which the resulting unsaturated end groups do not undergo further reactions. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2640–2650, 2004     

Atom transfer graft copolymerization of 2‐ethyl hexylacrylate from labile chlorines of poly(vinyl chloride) in an aqueous suspension

Copper‐mediated atom transfer radical polymerization (ATRP) is presented as a versatile tool for the graft copolymerization of 2‐ethyl hexylacrylate with poly(vinyl chloride) (PVC) in an aqueous suspension. The appreciable solubility of PVC in 2‐ethyl hexylacrylate (30%) at temperatures around 130 °C makes grafting of the monomer possible from labile chlorines of PVC in aqueous suspensions without the use of additional solvent. The first‐order kinetics (rate constant k = 4.2 × 10^?6 s^?1) of the mass percentage increase reveals a typical ATRP fashion of the graft copolymerization at low conversions. The use of a completely organosoluble copper(I) complex of hexylated triethylene tetramine, in combination with α‐methylcellulose as a stabilizer, makes the graft copolymerization possible in a dispersed organic phase. Nearly spherical, green particles can be obtained with moderate stirring rates (1000 rpm) in high graft yields. Although the kinetics of the reaction deviates from the first order at high conversions, reasonable graft yields (146%) can be attained within a reaction period of 24 h. In this study, the reaction conditions of the grafting have been studied, and graft products have been confirmed by common techniques such as ¹H NMR, gel permeation chromatography, and differential scanning calorimetry. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1900–1907, 2006     

Surface functionalized nano‐objects from oleic acid‐derived stabilizer via non‐polar RAFT dispersion polymerization

Surface functionalization in a nanoscopic scaffold is highly desirable to afford nano‐particles with diversified features and functions. Herein are reported the surface decoration of dispersed block copolymer nano‐objects. First, side‐chain double bond containing oleic acid based macro chain transfer agent (macroCTA), poly(2‐(methacryloyloxy)ethyl oleate) (PMAEO), was synthesized by reversible addition‐fragmentation chain transfer (RAFT) polymerization and used as a steric stabilizer during the RAFT dispersion block copolymerization of benzyl methacrylate (BzMA) in n‐heptane at 70 °C. We have found that block copolymer morphologies could evolve from spherical micelles, through worm to vesicles, and finally to large compound vesicles with the increase of solvophobic poly(BzMA) block length, keeping solvophilic chain length and total solid content constant. Finally, different thiol compounds having alkyl, carboxyl, hydroxyl, and protected amine functionalities have been ligated onto the PMAEO segment, which is prone to functionalization via its reactive double bond through thiol‐ene radical reactions. Thiol‐ene modification reactions of the as‐synthesized nano‐objects retain their morphologies as visualized by field emission‐scanning electron microscopy. Thus, the facile and modular synthetic approach presented in this study allowed in situ preparation of surface modified block copolymer nano‐objects at very high concentration, where renewable resource derived oleate surface in the nanoparticle was functionalized. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 263–273     

Dimethyl 1-hexene-2,5-dicarboxylate,methyl methacrylate dimer,as polymerizable acrylic ester bearing bulky α-substituent

Dimethyl 1-hexene-2,5-dicarboxylate (MMAD), a methyl methacrylate dimer, which is an acrylic ester bearing a large α-substituent, was polymerized and copolymerized. During the bulk polymerization at room temperature, an ESR spectrum assigned to the propagating radical was observed. MMAD which polymerized much slower than methyl methacrylate (MMA) was less reactive in copolymerization than MMA. These findings may exemplify that slow propagation concomitant with termination suppressed with steric hindrance could lead to polymer formation of MMAD. Thermogravimetric analysis of poly(MMAD) exhibited that the degadation through depropagation was facilitated by the α-substituent. A relatively large chain transfer constant of MMAD in MMA polymerization, 9.8 × 10^?3, was evaluated consistent with a considerable decrease in the molecular weight of poly (MMA) in the presence of a small amount of MMAD.     

Modelling free-radical copolymerization kinetics—evaluation of the pseudo-kinetic rate constant method, 2. Molecular weight calculations for copolymers with long chain branching

The full moment equations and equations using pseudo-kinetic rate constants for binary copolymerization with chain transfer to polymer in the context of the terminal model have been developed and solved numerically for a batch reactor operating over a wide range of conditions. Calculated number- and weight-average molecular weights (M̄_n and M̄_w) were compared with those found using the pseudo-kinetic rate constant method (PKRCM). The results show that the weight-average molecular weights calculated using PKRCM are in agreement with those found using the method of full moments for binary copolymerization when polymeric radical fractions φ₁^˙ and φ₂^˙ of type 1 and 2 (radical centers are on monomer types 1 and 2 for a binary copolymerization) are calculated accounting for chain transfer to small molecules and polymer reactions in addition to propagation reactions. Errors in calculating M̄_w using PKRCM are not always negligible when polymer radical fractions are calculated neglecting chain transfer to small molecules and polymer. In this case, the relative error in M̄_w by PKRCM increases with increase in monomer conversion, extent of copolymer compositional drift and chain transfer to polymer rates. The errors in calculating M̄_w, however, vanish over the entire monomer conversion range for all polymerization conditions when chain transfer reactions are properly taken into account. It is theoretically proven that the pseudo-kinetic rate constant for chain transfer to polymer is valid for copolymerizations. One can therefore conclude that the pseudo-kinetic rate constant method is a valid method for molecular weight modelling for binary and multicomponent polymerizations.     

Substituent effects in the catalytic chain transfer polymerization of 2-hydroxyethyl methacrylate

The catalytic chain transfer behavior of 2-hydroxyethyl methacrylate (HEMA) was studied in bulk at 40 and 60 °C. The chain transfer constant of cobaloxime boron fluoride (COBF) was found to be 6×10² at 40 and 60 °C, which corresponds to chain transfer rate coefficients of about 1.2×10⁶ and 2.0×10⁶ l mol⁻¹ s⁻¹, respectively. These values are about 10-15 times lower than those found previously for methyl methacrylate (MMA) and this decrease can be conceivably ascribed to the combination of a monomer viscosity effect, which lowers the rate coefficient by a factor of 6-8, and the complexation of the hydroxyl group with the catalyst, which causes an additional lowering by a factor of about two. The latter effect was studied by UV/Vis spectroscopy and additional kinetic studies of the COBF-mediated polymerization of MMA in the presence of ethanol. Similar UV/Vis spectra as in the case of HEMA and a reduction in chain transfer constant by a factor of two were observed.     

Radiation polymerization of methacrylates controlled by a chain transfer catalyst

The effect of γ-radiation dose and chain transfer catalyst on polymerization of methyl methacrylate (MMA) and copolymerization of MMA with hydroxyethyl methacrylate or triethylene glycol dimethacrylate has been investigated. The addition of 5 × 10^?4?10^?3 mol/L of bis[(difluoroboryl) isopropylpyridine dimethylglyoximato]cobalt(II) (Co(II)) makes it possible to produce macromonomers MM _n ⁼⁼ bearing terminal double bonds and having a degree polymerization of n = 2?40 and a polydispersity index of 1.05?1.15. It has been found that the degree polymerization of the macromonomers increases with the increasing γ-radiation dose and monomer conversion through the mechanism of the reversible β-cleavage of the terminal unit: R _k ^? + MM _n ⁼ ? MM _k+1 ⁼ + R _n-1 ^? followed by the living polymerization of both radicals. This reaction may compete with the catalytic chain transfer reaction and have a significant effect on the evolution of the molecular weight characteristics of the macromonomers during the course of MMA (co)polymerization.     

Atom transfer radical polymerization of methyl methacrylate by copper(I)‐pyridine‐2‐carboximidate catalysts

Pyridine‐2‐carboximidates [methyl ( 1a ), ethyl ( 1b ), isopropyl ( 1c ), cyclopentyl ( 1d ), cyclohexyl ( 1e ), n‐octyl ( 1f ), and benzyl ( 1g )] were prepared from the reaction of 2‐cyanopyridine with the corresponding alcohols. Cyclopentyl‐substituted 1d was found to be a highly effective ligand for copper‐catalyzed atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA). For example, the observed rate constant for a CuBr/ 1d catalytic system was found to be nearly twice as high as the cyclohexyl‐substituted CuBr/ 1e catalytic system [k_obs = (1.19 vs 0.56) × 10^?4 s^?1). The effects of the solvents, temperature, catalyst/initiator, and solvent/monomer ratio on the ATRP of MMA were studied systematically for the CuBr/ 1d catalytic system. The optimum condition for the ATRP of MMA was found to be a 1:2:1:400 [CuBr]_o/[ 1d ]_o/[ethyl 2‐bromoisobutyrate]_o/[MMA]_o ratio at 60 °C in veratrole solution, which yielded well‐defined poly(MMA) with a narrow molecular weight distribution of 1.14. The catalytically active copper complex 2d was isolated from the reaction of CuBr with 1d . Narrow molecular weight distributions as low as 1.06 were achieved for the CuBr/ 1d catalytic system by employing 10% of the deactivator CuBr₂. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2747–2755, 2004     

Atom transfer radical polymerization of 1-phenoxycarbonyl ethyl methacrylate monomer

Atom transfer radical polymerization conditions with copper(I) bromide/2,2^′-bipyridine (Cu/2,2^′-bpy) as the catalyst system were employed for the homopolymerization and random copolymerization of 1-phenoxycarbonyl ethyl methacrylate (PCMA) with methyl methacrylate (MMA). Temperature studies indicated that the polymerizations occurred smoothly in bulk at 110 °C. Poly(PCMA)(polydispersity index=1.27) homopolymer was characterized and then used as macroinitiator for increasing its molecular weight. The homopolymerization of PCMA was also carried out under free radical conditions using 2,2^′-azobisisobutyronitrile as an initiator.The monomer and polymers were characterized by FT-IR and ¹H and ¹³C-NMR techniques. The glass transition temperatures, the solubility parameters and average-molecular weights of the polymers were determined. Thermal stabilities of the polymers were given as compared with each other by using TGA curves. Thermal degradation products of poly(PCMA)s obtained by ATRP and free radical polymerization were compared with each other by using ¹H-NMR technique.     

A Study on End Group Characterization of Poly(phenacyl methacrylate) Polymer Produced by Free Radical Polymerization

Free‐radical homopolymerization and copolymerization of phenacyl methacrylate (PAMA) with methyl methacrylate (MMA) was done using 2,2′‐azobis(isobutyronitrile) (AIBN) as the initiator in 1,4‐dioxane at 60°C. ¹H‐NMR and FT‐IR spectroscopy confirmed the existence of OCH₂ and CH signals and unsaturated structure and CN stretch at the chain end of low molecular weight poly(phenacyl methacrylate)[poly(PAMA)], respectively. The six‐membered ring with both ester and ether at the end group was detected by ¹H‐NMR. In the poly(PAMA), the end groups formed due to chain transfer reactions were found in large concentrations. The mechanism of the formation of end groups has been presented. The behavior of free radical polymerization of PAMA was compared with that of phenoxycarbonylmethyl methacrylate (PCMMA). The molecular weight distribution of the homo and copolymers was determined using gel permeation chromatography. Thermal properties of the polymers were determined using differential thermal analysis (DTA) and thermogravimetric analysis (TGA).     

A Study on End Group Characterization of Poly(phenacyl methacrylate) Polymer Produced by Free Radical Polymerization

Free‐radical homopolymerization and copolymerization of phenacyl methacrylate (PAMA) with methyl methacrylate (MMA) was done using 2,2′‐azobis(isobutyronitrile) (AIBN) as the initiator in 1,4‐dioxane at 60°C. ¹H‐NMR and FT‐IR spectroscopy confirmed the existence of OCH₂ and CH signals and unsaturated structure and CN stretch at the chain end of low molecular weight poly(phenacyl methacrylate) [poly(PAMA)], respectively. The six‐membered ring with both ester and ether at the end group was detected by ¹H‐NMR. In the poly(PAMA), the end groups formed due to chain transfer reactions were found in large concentrations. The mechanism of the formation of end groups has been presented. The behavior of free radical polymerization of PAMA was compared with that of phenoxycarbonylmethyl methacrylate (PCMMA). The molecular weight distribution of the homo and copolymers was determined using gel permeation chromatography. Thermal properties of the polymers were determined using differential thermal analysis (DTA) and thermogravimetric analysis (TGA).     

Organostibine mediated controlled/living random copolymerization of styrene and methyl methacrylate

The first example of organostibine mediated controlled/living random copolymerization of styrene (St) and methyl methacrylate (MMA) was achieved by heating a solution of St/MMA/organostibine mediator at 100 °C or St/MMA/organostibine mediator/AIBN with various monomer feed ratios at 60 °C. The addition of AIBN significantly decreased the reaction temperature and enhanced the rate of copolymerization. The structure of poly(St-co-MMA) was verified by ¹H NMR. The reactivity ratios at 60 °C were determined by the extended Kelen-Tüd?s method to be γ_St = 0.40 and γ_MMA = 0.44. The ln([M]₀/[M]) increased linearly with increasing reaction time. The number-average molecular weights of poly(St-co-MMA) increased linearly with conversion. Poly(St-co-MMA) with expected number-average molecular weight and low polydispersity index was formed. The living characteristic was further confirmed by chain-extension of poly(St-co-MMA) to form poly(St-co-MMA)-b-PMMA.     

Syntheses of graft and star copolymers possessing polyolefin branches by using polyolefin macromonomer

Graft and star copolymers having poly(methacrylate) backbone and ethylene–propylene random copolymer (EPR) branches were successfully synthesized by radical copolymerization of an EPR macromonomer with methyl methacrylate (MMA). EPR macromonomers were prepared by sequential functionalization of vinylidene chain‐end group in EPR via hydroalumination, oxidation, and esterification reactions. Their copolymerizations with MMA were carried out with monofunctional and tetrafunctional initiators by atom transfer radical polymerization (ATRP). Gel‐permeation chromatography and NMR analyses confirmed that poly(methyl methacrylate) (PMMA)‐g‐EPR graft copolymers and four‐arm (PMMA‐g‐EPR) star copolymers could be synthesized by controlling EPR contents in a range of 8.6–38.1 wt % and EPR branch numbers in a range of 1–14 branches. Transmission electron microscopy of these copolymers demonstrated well‐dispersed morphologies between PMMA and EPR, which could be controlled by the dispersion of both segments in the range between 10 nm and less than 1 nm. Moreover, the differentiated thermal properties of these copolymers were demonstrated by differential scanning calorimetry analysis. On the other hand, the copolymerization of EPR macromonomer with MMA by conventional free radical polymerization with 2,2′‐azobis(isobutyronitrile) also gave PMMA‐g‐EPR graft copolymers. However, their morphology and thermal property remarkably differed from those of the graft copolymers obtained by ATRP. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5103–5118, 2005     

Polymerization of Methyl Methacrylate with Bis(Cyclopentadienyl)Titanium Dichloride in a Water-Methanol Mixture: Formation of Tetrahydrofuran-Insoluble Polymer

Abstract

Methyl methacrylate (MMA) was found to be effectively polymerized with bis(cyclopentadienyl)titanium dichloride (CP₂TiCl₂) in a water-methanol mixture (1:1, v/v). The polymerization proceeded heterogeneously because the resulting poly(MMA) was insoluble in the system. The rate (R _p) of the heterogenous polymerization was apparently expressed by R _p = k[Cp₂TiCl₂]²[MMA]^2˙5 (at 40°C). The resulting poly(MMA) was observed to consist of tetrahydrofuran (THF)-soluble and insoluble parts. In contrast with the usual radical poly(MMA), the THF-insoluble part was soluble in benzene, toluene, and chloroform but insoluble in polar solvents such as ethyl acetate, acetone, acetonitrile, dimethylformamide, and dimethylsulfoxide. The polymerization was found to be profoundly accelerated by irradiation with a fluorescent room lamp (15 W). The results of copolymerization of MMA and acrylonitrile indicated that the present polymerization proceeds through a radical mechanism.     

RADICAL POLYMERIZATION OF METHYL METHACRYLATE WITH DIPHENYL DISELENIDE UNDER THERMAL OR PHOTOIRRADIATIONAL CONDITIONS

Polymerization of methyl methacrylate (MMA) with diphenyl diselenide (DPDSE) in the presence of AIBN at 60°C was investigated. DPDSE was worked as a chain transfer agent (CTA). The chain transfer constant (C_tr) of DPDSE for MMA was estimated to be 1.43. On the other hand, DPDSE was functioned as a photoiniferter for the photopolymerization of MMA. In a limited range of conversion, both the polymer yield and number average of molecular weight ([Mbar]_n) increased with the reaction time, and the [Mbar]_n linearly increased with the yield. The terminal structure of poly(MMA) was investigated by the ⁷⁷Se NMR spectrum based on Methyl α-phenylseleno isobutylate (MSEPI) as model compound of the ω-chain end of poly(MMA). Further, photopolymerization of poly (MMA) containing phenylseleno group at ω-chain end as a polymeric photoiniferter with MMA effectively afforded a poly (MMA) having higher molecular weight.     

水分散体系中苯乙烯和甲基丙烯酸甲酯梯度共聚物的合成与表征

以2-溴代异丁酸乙酯(EBiB)为引发剂,CuBr/CuBr₂/1,10-邻二氮菲(phen)为复合催化剂,十二烷基磺酸钠(SLS)为乳化剂,考察了水分散体系中苯乙烯(St)和甲基丙烯酸甲酯(MMA)的原子转移自由基共聚合的可控性和相对反应活性.在此基础上,通过反应进料法在水分散体系中进行了St和MMA的梯度共聚合,反应表现出“活性”聚合的特征,即所得共聚物的数均分子量随着单体转化率的增加而增大,分子量分布较窄(M_w/M_n<1.50).用¹HNMR跟踪分析了聚合反应过程中共聚物微观组成的变化规律,结果表明,共聚物链中MMA链节的累积含量和瞬时含量都随着共聚物相对链长的增加而增加,即随着聚合物相对链长的增加共聚物的微观组成从St链节占主导地位逐渐变化为以MMA链节占主导地位,表明确实形成了St和MMA的梯度或渐变共聚物.     

Grafting from ramie fiber with poly(MMA) or poly(MA) via reversible addition-fragmentation chain transfer polymerization

Reversible addition-fragmentation chain transfer (RAFT) polymerization was utilized to control the grafting of methyl methacrylate (MMA) and methyl acrylate (MA) from natural ramie fibers substrate. The hydroxyl groups of ramie fibers were first converted to 2-dithiobenzoyl isobutyrate as a RAFT chain transfer agent (CTA), which was further grafted with MMA or MA mediated by the RAFT polymerization in a presence of 2-(ethoxycarbonyl)prop-2-yl dithiobenzoate as a free chain transfer agent. Hydrophobic poly(MMA) or poly(MA) modified ramie fibers with contact angles greater than 130° were obtained. The modified ramie fibers were analyzed by gravimetry, Fourier transform infrared spectroscopy, scanning electron microscopy, differential scanning calorimetry, thermogravimetry and contact angle measurements. The results indicate that the polymer chains had indeed been grafted from the surface of the ramie fibers with an average 33% of the hydroxyl groups in the raw ramie fiber substituted by 2-bromoisobutyryl bromide and an average grafting ratio of 25% poly(MMA) or poly(MA) related to ramie fiber. The homopolymers formed in the copolymerization were also analyzed to estimate molecular weights and polydispersity indices of grafting chains from the surface of ramie fibers by size exclusion chromatography, which showed narrow polydispersity with the PDIs to be <1.32. This study provides a novel and feasible approach to the preparation of functional composite materials for utilizing the abundant natural ramie fiber cellulose resource.