Effect of pH on the control of molecular orientation in monolayer of bent-core liquid crystal materials by Langmuir–Blodgett method

Control of molecular orientation at the substrate surface is significant to understand the surface science. Langmuir films of bent-core liquid crystals having alkyl chains at both ends were deposited on silicon substrate. Studies were carried out on air–water interface by changing pH of the subphase. On compression, molecules were arranged in stacks at high pH where as uniform monolayer was formed at lower pH. Limiting area increased at low pH, which resulted in the formation of monolayer after attaining a sustainable surface pressure. Langmuir films were transferred to silicon substrate, and atomic force microscopy images showed appropriate height profiles.     

Effects of hydrogen bonding on the monolayer properties of amphiphilic double-decker-shaped polyhedral silsesquioxanes

"Core-corona" type amphiphiles, which comprise double-decker-shaped POSSs (DDSQs) as the core and two or four di(ethylene glycol) (DEG) units as the coronae, have recently been reported to form a stable monolayer at the air-water interface. In this paper, another core-corona amphiphile, 2DEGNH-DDSQ, which has a urethane group at the end of the coronae, was synthesized to elucidate the effects of hydrogen bonding on monolayer properties. The surface pressure-area isotherm and Brewster angle microscopy revealed that 2DEGNH-DDSQ initially formed rodlike assemblies. They subsequently coalescence to form a uniform monolayer with compression. Actually, 2DEGNH-DDSQs are well ordered in the rodlike assembly because of the strong hydrogen bonds among the urethane groups, as confirmed by FT-IR spectra. Although the monolayer was not transferred onto a solid substrate, mixing of 2DEGNH-DDSQ with 2DEG-DDSQ, which has already been reported to form a liquidlike monolayer, overcame this problem. The 1:1 molar mixture of 2DEGNH-DDSQ and 2DEG-DDSQ forms a uniform liquidlike monolayer. The mixed monolayer was transferred onto a solid substrate as a Z-type Langmuir-Blodgett film. Atomic force microscopic (AFM) images of the mixed-bilayer film showed a uniform surface with root-mean-square surface roughness of 0.21 nm. The intermolecular hydrogen bonds between the urethane groups in 2DEGNH-DDSQ and the hydroxyl groups in 2DEG-DDSQ improve the monolayer properties, which enable successful transfer of the LB film.     

Preparation and characterization of redox cellulose Langmuir–Blodgett films containing a ferrocene derivative

The 3‐ferrocenoylpropanoyl group, one of the redox species, was introduced at C‐2 and/or C‐3 positions of 6‐O‐(4‐stearyloxytrityl)cellulose. The spreading behavior of the cellulose derivatives on the water surface and the properties of Langmuir–Blodgett (LB) films were investigated. The surface pressure–area isotherm of the cellulose monolayer was changed by the subphase temperature. Uniform monolayers of 6‐O‐(4‐stearyloxytrityl)cellulose 3‐ferrocene propionate (STCFc) could be deposited successively onto several substrates by the horizontal lifting method at 10 mN m^?1, and this produced X‐type LB films. The successive uniform depositions of STCFc were confirmed by ultraviolet–visible absorption spectra. X‐ray diffraction measurements indicated that the thickness of the STCFc molecules in the LB films was 1.99 nm. Fourier transform infrared spectroscopy measurements supported the idea that hydrocarbon chains in the LB films were highly ordered (trans‐zigzag) and oriented considerably perpendicular to the surface of the substrate. Moreover, the C?O group of the ferrocenoyl groups was perpendicular to the surface of the substrate, and the ferrocene group was occupied in the water phase. Cyclic voltammograms for the STCFc monolayer on a gold electrode exhibited surface waves. The interfacial electron‐transfer process between the redox site incorporated into the cellulose LB monolayer and the electrode surface was fast enough at a scanning rate lower than 100 mV s^?1. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5023–5031, 2005     

Au@Pt纳米粒子单层膜对甲醇氧化的电催化性能及SERS研究

通过种子生长法合成Au@Pt核壳结构纳米粒子,采用两相成膜法制备单层粒子膜,并转移获得Au@Pt核壳纳米粒子单层膜电极,该电极表面纳米粒子分布均匀,具有较大的比表面,对甲醇的氧化具有较好的电催化活性.研究表明,利用内核Au的长程电磁场增强效应,该单层膜表现出均匀且优良的表面增强拉曼散射(SERS)活性,适合作为基底在分子水平上研究表面的吸附和反应.获得了Au@Pt核壳纳米粒子单层膜表面甲醇电催化氧化过程的SERS光谱,为深入分析表面反应机理提供了实验依据.     

Preparation and Characterization of 6-<Emphasis Type="Italic">O</Emphasis>-(4-stearyloxytrityl)Cellulose acetate Langmuir–Blodgett Films

Multilayer films of 2,3-di-O-acetyl-6-O-(4-stearyloxytrityl)cellulose (ASTC) were prepared and investigated. The fairly high surface pressure (π)–area (A) isotherms (36– 47 mN/m) suggest that the balky and hydrophobic trityl group contribute to form a condensed monolayer. The cellulose derivative formed a homogeneous monolayer at 10 mN/m. The monolayer on the water surface was transferred successfully at 10 mN/m onto various substrates by modifying the preparation methods, to form Z-type multilayer films. The ultraviolet–visible (UV–Vis) absorbance was independent of the number of layers, indicating that each layer is made of definite number of anhydroglucose unit (AGU). The monolayer thickness determined from atomic force microscope (AFM) and ellipsometry was calculated to be about 1.9 nm, suggesting that the long alkyl chain in the film has a so-called hairy-rod type structure. This is the first paper about the Z-type LB film prepared from cellulose derivatives having long mono-alkyl chain only at 6-O-position.     

Effects of the surface pressure on the formation of Langmuir-Blodgett monolayer of nanoparticles

The effects of the surface pressure on the particle arrangement of Langmuir-Blodgett (LB) monolayers of alkanethiol-capped gold nanoparticles were studied. The LB monolayers were prepared from a highly concentrated particle solution, which increases film fabrication efficiency but readily causes small particle voids in the particle array. Overcompressing the LB monolayer to a high surface pressure restructured the particles and eliminated the voids. When the gold particles capped by dodecanethiol were 8.5 nm in diameter, the particle arrangement was vastly improved and a wafer-scale LB monolayer was transferred onto a substrate at the surface pressure of 20 mN/m.     

A study of the interaction between polyelectrolyte-coated nanostructured CaCO<Subscript>3</Subscript> particles and a stearic acid monolayer spread at the water/air interface

The influence of nanostructured CaCO₃ particles, both uncoated and coated with a polyelectrolyte (poly(diallyldimethylammonium chloride), polyethyleneimine, fluorescein-5-isothiocyanate-labeled poly(allylamine hydrochloride), or sodium polystyrene sulfonate), on a stearic acid monolayer spread on the surface of an aqueous subphase has been studied. The interaction of the particles present in the subphase with the monolayer as depending on the presence and composition of a polymer coating has been estimated with the help of compression isotherms and the Brewster angle microscopy. The monolayers were transferred from the aqueous subphase onto a solid substrate and studied by scanning electron microscopy. Strong interaction has been revealed between the calcium carbonate particles and the stearic acid monolayer. It has been shown that the transfer of the monolayer from the aqueous suspension surface onto the solid substrate may be accompanied by the detachment of the polymer coating from the surface of CaCO₃ particles or their transfer together with the monolayer.     

Stretching of single DNA molecules complexed with restriction endonuclease by Langmuir-Blodgett method

We have proposed a new technique for stretching single double-stranded DNA molecules on solid substrates by the Langmuir–Blodgett (LB) method. The polyion complex monolayer of a cationic amphiphile and DNA molecules formed at the air–water interface was transferred on a clean glass substrate. Vertical lifting up of the glass substrate provided the transferred monolayer consisting the stretched individual DNA molecules aligned parallel to the lifting direction on the glass. The DNA molecules complexed with the restriction endonuclease (EcoRI) were employed for stretching by using this method. Fluorescence images of the transferred monolayer showed that the EcoRI-binding DNA molecules could be stretched and immobilized on the glass substrate. A specific sequence of DNA recognized by EcoRI was detected as spatial positions of the stretched DNA molecules.     

水/甲苯界面制备均匀可循环SERS基底

采用在沸水浴中还原硅酸钠的方法制备壳层约4nm的Au@SiO2核壳纳米粒子,利用水/ 甲苯两相界面诱捕出其单粒子层膜并将这层膜转移到Si片上.作为对比,采用化学方法自组装Au@SiO2膜至ITO玻璃表面. 以1,4-对苯二硫作为探针分子考察了它们的SERS活性以及可循环使用性能. 研究结果表明,Au@SiO2核壳粒子可避免待测分子与基底直接接触,NaBH4溶液可作为基底循环的洗涤剂,经化学组装的基底的可循环性能较差,每次洗涤SERS效应均有一定程度降低,而两相界面形成的单粒子致密膜的SERS效应稳定性较好,其循环性能较高,即使洗涤10次后,SERS效应仍未明显降低,此膜可作为循环使用的SERS基底.     

Substrate‐induced formation of a recognition structure in a four‐polypeptide–lipid monolayer system

Poly(γ‐methyl L ‐glutamate)s with Ser, His, Asp, and Glu residues at the amino terminal as the serine protease catalytic site were prepared. The number‐average degree of polymerization of the polypeptides was 51. A dipalmitoylphosphatidylcholine monolayer containing the polypeptides was formed at the air–water interface and was transferred onto gold‐deposited glass plates. The binding of N‐acetyltyrosine ethyl ester, a typical substrate of the serine protease, to the monolayer was characterized by surface plasmon resonance measurements. The four‐polypeptide–lipid monolayer system conditioned on an aqueous solution containing the substrate N‐acetyltyrosine ethyl ester exhibited Langmuir‐type binding of the substrate. Its binding constant of 6.1 × 10⁴ M⁻¹ was about 20 times larger than that observed for a monolayer prepared on pure water. The behavior may have arisen from a substrate‐induced rearrangement of the four kinds of polypeptides in the monolayer, forming a substrate‐binding structure similar to that found in serine protease. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2186–2191, 2000     

Fluorescence microscopy studies of layer/substrate interaction during the Langmuir-Blodgett transfer: Fractional condensation and local layer modification in lipid monolayers at the three-phase line

Transfer fluorescence microscopy reveals the substrate-mediated fractional condensation and phase-selective deposition of dipalmitoylphosphatidylcholine (DPPC) and dimyristoylphosphatidylethanolamine (DMPE) monolayers during the LB-transfer. Preferentially the higher ordered liquid-condensed (LC) state is transferred onto the substrate during the transfer of a monolayer in the LC/LE (liquid/expanded) coexistence state on the water subphase. This is manifested in the directly observable attraction of LC-domains towards the three-phase line and observation of a domain-free gap as consequence of the segregation of the fluorescent probe into the floating monolayer adjacent to the three-phase line. Fingering domain growth nucleating at the three-phase line and the substrate-mediated pressure deposition of probe-free material corroborate the preference of the solid substrate for the higher condensed phase. These observations are caused by changes in the free energy of the monolayer due to the replacement of the aqueous interface by the solid substrate surface.     

Immobilization of glucose oxidase onto a Langmuir-Blodgett ultrathin film of a cellulose derivative deposited on a self-assembled monolayer

Glucose oxidase was immobilized on a Langmuir-Blodgett film of cellulose acetate propionate deposited on a self-assembled monolayer coated substrate. These layers were characterized in terms of their ellipsometric thickness, wettability and infra-red spectra. Glucose oxidase was immobilized on this composite layer by physisorption. The presence of the enzyme on the surface was confirmed by ellipsometry, infra-red spectroscopy and by detecting its activity electrochemically. An enzyme population remained active after adsorption onto this assembly.     

Transferable ordered ni hollow sphere arrays induced by electrodeposition on colloidal monolayer

We report an electrochemical synthesis of two-dimensionally ordered porous Ni arrays based on polystyrene sphere (PS) colloidal monolayer. The morphology can be controlled from bowl-like to hollow sphere-like structure by changing deposition time under a constant current. Importantly, such ordered Ni arrays on a conducting substrate can be transferred integrally to any other desired substrates, especially onto an insulting substrate or curved surface. The magnetic measurements of the two-dimensional hollow sphere array show the coercivity values of 104 Oe for the applied field parallel to the film, and 87 Oe for the applied field perpendicular to the film, which is larger than those of bulk Ni and hollow Ni submicrometer-sized spheres. The formation of hollow sphere arrays is attributed to preferential nucleation on the interstitial sites between PS in the colloidal monolayer and substrate, and growth along PSs' surface. The transferability of the arrays originates from partial contact between the Ni hollow spheres and substrate. Such novel Ni ordered nanostructured arrays with transferability and high magnetic properties should be useful in applications such as data storage, catalysis, and magnetics.     

Tuning the arrangement of mono-crown ether-substituted phthalocyanines in Langmuir-Blodgett films by the length of alkyl chains and the cation in subphase

Amphiphilic phthalocyanines with one crown ether and three alkyl chain substitutions can form stable monolayers on a water surface. This monolayer can be transferred to a substrate by a vertical dipping method. The arrangement of phthalocyanine molecules in LB films was affected by the length of alkyl chains and the coordination of alkali ions in crown ether. Davydov splitting was observed in the absorption spectra of the LB films of phthalocyanine with the shortest alkyl chain substitutions, and this splitting was affected by the alkali ions in the subphase.     

Films of novel mesogenic molecules at air-water and air-solid interfaces

Discotic molecules are known to form highly anisotropic structures at the air-water (A-W) interface. We have studied two novel ionic discotic mesogenic molecules, viz., pyridinium tethered with hexaalkoxytriphenylene with bromide counterion (Py-Tp) and imidazolium tethered with hexaalkoxytriphenylene with bromide counterion (Im-Tp) at A-W and air-solid interfaces. The monolayer phases were investigated at the A-W interface employing surface manometry and Brewster angle microscopy techniques. They indicate a uniform monolayer phase which shows negligible hysteresis on expanding and compressing. Also, in both the systems the collapsed state completely reverts to the monolayer state. These monolayer films transferred at different surface pressures by Langmuir-Blodgett technique were studied by employing atomic force microscopy. The topographies of these films transferred at the low and high surface pressure region of the isotherm indicate a transformation of the monolayer from face-on to edge-on structure.     

Polymerization of diacetylene phospholipid bilayers on solid substrate: influence of the film deposition temperature

Micropatterned phospholipid bilayers on solid substrates offer an attractive platform for various applications, such as high throughput drug screening. We have previously developed a photopolymerization-based methodology for generating micropatterned bilayers composed of polymerized and fluid lipid bilayers. Lithographic photopolymerization of a diacetylene-containing phospholipid (DiynePC) allowed facile fabrication of compartmentalized arrays of fluid lipid membranes. Herein, we report on a key experimental parameter that significantly influences the homogeneity and quality of the fabricated polymeric bilayers, namely the temperature at which monolayers of monomeric DiynePC were formed on the water surface and transferred onto solid substrates by the Langmuir-Blodgett/Langmuir-Schaefer (LB/LS) technique. Using fluorescence microscopy and atomic force microscopy, it was found that polymerized bilayers were homogeneous, if bilayers of DiynePC were prepared below the triple point temperature (ca. 20 degrees C) of the monolayer, where a direct transition from the gaseous state to the liquid condensed state occurred. Bilayers prepared above this temperature had a markedly increased number of crack-like line defects. The differences were attributed to the domain structures in the monolayer that were transferred from the water surface to the substrate. Domain size, rather than the molecular packing in each domain, was concluded to play a critical role in the formation of defects. The spontaneous curvature and area changes of bilayers were postulated to cause destabilization and detachment of the films from the substrate upon polymerization. Our present results highlight the importance of controlling the domain structures for the homogeneity of polymerized bilayers required in technological applications.     

A procedure for studying the sorption of ethanol vapor on a monomolecular Langmuir-Blodgett arachic acid film

The paper presents the results of studies of the sorption of ethanol from the gas phase by a monomolecular arachic acid layer deposited by the Langmuir-Blodgett method onto the surface of a nickel substrate. Studies were performed using a working model based on a field-effect transistor. Sorption was accompanied by changes in the potential of the nickel substrate. The dependence of transistor current I _D on time t was related to the conditions of Langmuir-Blodgett film deposition. The value and characteristic time of signal variations as the atmosphere changed depended on the pressure of monolayer deposition and, therefore, monolayer phase state on the surface of water when it was transferred to the solid substrate. The experimental I _D (t) dependence was compared with the time dependence of arachic monolayer surface coverage with sorbent molecules calculated by the Langmuir model. The conclusion was drawn that the model was capable of describing the sorption of ethanol vapor by the Langmuir-Blodgett arachic acid monolayer at low partial pressures p ≤ 0.05p ₀, where p ₀ is the saturated vapor pressure.     

Interaction of small amounts of bovine serum albumin with phospholipid monolayers investigated by surface pressure and atomic force microscopy

The influence of small amounts of bovine serum albumin (BSA) (nM concentration) on the lateral organization of phospholipid monolayers at the air-water interface and transferred onto solid substrates as one-layer Langmuir-Blodgett (LB) films was investigated. The kinetics of adsorption of BSA onto the phospholipid monolayers was monitored with surface pressure isotherms in a Langmuir trough, for the zwitterionic dipalmitoylphosphatidyl ethanolamine (N,N-dimethyl-PE) and the anionic dimyristoylphosphatidic acid (DMPA). A monolayer of N,N-dimethyl-PE or DMPA incorporating BSA was transferred onto a solid substrate using the Langmuir-Blodgett technique. Atomic force microscopy (AFM) images of one-layer LB films displayed protein-phospholipid domains, whose morphology was characterized using dynamic scaling theories to calculate roughness exponents. For DMPA-BSA films the surface is characteristic of self-affine fractals, which may be described with the Kardar-Parisi-Zhang (KPZ) equation. On the other hand, for N,N-dimethyl-PE-BSA films, the results indicate a relatively flat surface within the globule. The height profile and the number and size of globules varied with the type of phospholipid. The overall results, from kinetics of adsorption on Langmuir monolayers and surface morphology in LB films, could be interpreted in terms of the higher affinity of BSA to the anionic DMPA than to the zwitterionic N,N-dimethyl-PE. Furthermore, the effects from such small amounts of BSA in the monolayer point to a cooperative response of DMPA and N,N-dimethyl-PE monolayers to the protein.     

Modulated pattern formation of phospholipid monolayers on curved surfaces

Langmuir-Blodgett transfer of a dipalmitoylphosphatidylcholine monolayer onto macroscopically curved mica surfaces results in microscopic patterns of the transferred monolayer that differ from those of films transferred onto a flat mica substrate. On curved surfaces a modulated horizontal striped pattern evolves that has a zigzag boundary at the liquid condensed front of the stripe and a continuous straight boundary at the liquid condensed rear. We propose that the sensitivity of the pattern to the macroscopic curvature of the sample is due to a flow-controlled hydrodynamic instability caused by the subphase flow close to the three-phase contact line.     

Orientation of the alkyl side chains and glucopyranose rings in Langmuir–Blodgett films of a regioselectively substituted cellulose ether

An arrangement for the long alkyl side chains in a Langmuir–Blodgett (LB) film from regioselectively alkylated 2,3-di-O-octadecylcellulose on an Au-coated substrate was investigated using Fourier transform infrared reflection absorbance spectroscopy. The IR results indicated that the hydrophobic long alkyl side chains were forced to be repellent to the surface of water, resulting in deposition on the substrate, with it being tilted in the vertical direction, and further formed both hexagonal and orthorhombic crystalline structures up to 10 layers in the LB film. In addition, molecular modeling with CAChe software indicated that the optimized assembly of the side chains was supposed to own a vertical arrangement against the substrate surface after compression of the monolayer. This means that the conformation of 2₁ screw of the cellulose molecular chain may be altered by the compression to have an unusual conformation by a different φ–ψ dihedral angle such as onefold axis without a symmetry element.