Synthesis of 2-(2′,3′-dihydroxypropyl)-5-amino-2H-1,2,4-thiadiazol-3-one and 3-(2′,3′-dihydroxypropyl)-5-amino-3H-1,3,4-thiadiazol-2-one

The synthesis of two new acyclic nucleoside analogs, 2-(2′,3′-dihydroxypropyl)-5-amino-2H-1,2,4-thiadiazol-3-one (1) and 3-(2′,3′-dihydroxypropyl)-5-amino-3H-1,3,4-thiadiazol-2-one (2), is reported. The first compound, 1, was obtained by reaction of 3-chloro-1,2-propanediol with the sodium salt of 5-amino-2H-1,2,4-thiadiazol-3-one (3) in anhydrous dimethylformamide. Similarly, 5-amino-3H-1,3,4-thiadiazol-2-one (4) reacted with 3-chloro-1,2-propanediol to give 2. The thiadiazole 4 was prepared by condensation-cyclization of hydrazothiodicarbonamide (9).     

Synthesis of polyamide-quinazolinediones from 2,2′-disubstituted bis(1,3,4-oxadiazolin-5-ones) and aromatic bis-o-amino esters

A novel class of polyamide-quinazolinediones was synthesized by the polymerization of 2,2′-disubstituted bis(1,3,4-oxadiazolin-5-ones) with aromatic bis-o-amino esters in m-cresol. The polymerization probably proceeded in the formation of ring-opening adducts, which in turn were cyclized by the elimination of alcohol to give polyamide–quinazolinediones. These polymers, which were soluble in polar aprotic solvents such as dimethylformamide, dimethylacetamide, N-methyl-2-pyrrolidone, and dimethyl sulfoxide, had, with one exception, reduced viscosities in the range of 0.12–0.32 dL/g. Thermogravimetric analyses indicated that they began to decompose at 310–360°C in air.     

5-(α-Fluorovinyl)tryptamines and 5-(α-Fluorovinyl)-3-(N-methyl-1′,2′,5′,6′,-tetrahydropyridin-3′- and -4′-yl)indoles—5-(α-Fluorovinyl)tryptamines

5-(α-Fluorovinyl)tryptamines 4a, 4b and 5-(α-fluorovinyl)-3-(N-methyl-1′,2′,5′,6′-tetrahydropyridin-3′- and -4′-yl) indoles 5a, 5b were synthesized using 5-(α-fluorovinyl)indole ( 7 ). The target compounds are bioisosteres of 5-carboxyamido substituted tryptamines and their tetrahydropyridyl analogs.     

Synthesis and structure of (4R,5R)-α,α,α′,α′-2,2-hexaphenyl-4,5-dimethanol-1,3-dioxolane

We report the synthesis of the 1,4-diol (4R,5R)-α,α,α′,α′-2,2-hexaphenyl-4,5-dimethanol-1,3-dioxolane from dimethyl-L-tartrate and benzophenone. The X-ray and the IR structural studies on show that this compound has a preferred conformation with OHPh interactions which are different from related compounds.     

Angiotensin-II Analogues. I: Synthesis and incorporation of the halogenated amino acids 3-(4′-iodophenyl)alanine, 3-(3′,5′-dibromo-4′-chlorophenyl)alanine, 3-(3′,4′,5′-tribromophenyl)alanine,and 3-(2′,3′,4′,5′,6′-pentabromophenyl)alanine

The synthesis of the polyhalogenated phenylalanines Phe(3′,4′,5′-Br₃) ( 3 ), Phe(3′,5′-Br₂-4′-Cl) ( 4 ) and DL -Phe (2′,3′,4′,5′,6′-Br₅) ( 9 ) is described. The trihalogenated phenylalanines 3 and 4 are obtained stereospecifically from Phe(4′-NH₂) by electrophilic bromination followed by Sandmeyer reaction. The most hydrophobic amino acid 9 is synthesized from pentabromobenzyl bromide and a glycine analogue by phase-transfer catalysis. With the amino acids 4, 9 , Phe(4′-I) and D -Phe, analogues of [1-sarcosin]angiotensin II ([Sar¹]AT) are produced for structure-activity studies and tritium incorporation. The diastereomeric pentabromo peptides L - and D - 13 are separated by HPLC. and identified by catalytic dehalogenation and comparison to [Sar¹]AT ( 10 ) and [Sar¹, D -Phe⁸]AT ( 14 ).     

Asymmetric Synthesis of (S)-5,5,5,5′,5′,5′,5′-Hexafluoroleucine

(S)-5,5,5,5′,5′,5′-Hexafluoroleucine ((S)- 13 ) of 81 % ee is prepared from hexafluoroacetone ( l ) and ethyl bromopyruvate (= ethyl 2-oxopropanoate) in 7 steps with an overall yield of 18% (Schemes 1 and 2). Key step in this sequence is the highly enantioselective reduction of the carbonyl group in α-keto ester 4 either by bakers' yeast (91 % ee) or by ‘catecholborane’ 6 utilizing an oxazaborolidine catalyst, yielding hydroxy ester (R)- 5 with 99% ee. The absolute configuration was determined by X-ray analysis of the HCl adduct (S,R)- 9b of (2S)-N-[(R)- l-phenylethyl]-5,5,5,5′,5′,5′-hexafluoroleucine ethyl ester.     

Effect of tin tetrachloride on thermal decompositions of α,α′-azobisisobutyronitrile and dimethyl α,α′-azobisisobutyrate

Thermal decomposition of α,α′-azobisisobutyronitrile (AIBN) and dimethyl α,α′-azobisisobutyrate (MAIB) in the presence of a large amount of tin tetrachloride was investigated to determine the effect of complex formation on the decomposition rates and yields of the recombination products. The addition of tin tetrachloride significantly increased the decomposition rates; the observed first-order rate constant increased by factors of 4.5 and 17 at molar ratios of [SnCl₄]/[AIBN] = 21.65 and [SnCl₄]/[MAIB] = 19.53, respectively. It was found that the decomposition of these azo compounds was also accelerated by the addition of a comparable amount of donor solvent such as ethyl acetate or propionitrile to tin tetrachloride and that the enhancement in rate was accounted for by a larger frequency factor in the Arrhenius equation. Furthermore, the addition of tin tetrachloride seemed to suppress the formation of recombination products, tetramethyl succinonitrile and dimethyl tetramethylsuccinate, of the radicals produced by decomposition.     

N,N′,N′′,N′′′‐Tetraethylterephthalamidinium bis(tetrazolate)

The crystal structure of the title 2:1 salt of tetrazole and a substituted terephthal­amidine, C₁₆H₂₈N₄²⁺·2CHN₄^?, contains an infinite network of hydrogen bonds, with short N?N distances of 2.820 (2) and 2.8585 (19) Å between the tetrazolate anion and the amidinium cation. Involvement of the lateral N atoms of the tetrazole in the hydrogen bonding appears to be a typical binding pattern for the tetrazolate anion.     

2,2′‐Bipyridinium bis(perchlorate)

The title compound, [H₂bipy](ClO₄)₂ or C₁₀H₁₀N₂²⁺·2ClO₄^?, was obtained at the interface between an organic (2,2′‐bi­pyridine in methanol) and an aqueous phase (perchloric acid in water). The compound crystallizes in space group P and comprises discrete diprotonated trans‐bipyridinium cations, [H₂bipy]²⁺, and ClO₄^? anions. The cations and anions are connected through N—H?O and C—H?O hydrogen bonds [distances N?O 2.817 (4) and 2.852 (4) Å, and C?O 3.225 (6)–3.412 (5)Å]. The C—C bond distance between the two rings is 1.452 (5) Å. The bipyridinium cation has a trans conformation and the N—C—C—N torsion angle is 152.0 (3)°.     

Syntheses of polyamides and polypyrrolones from 2,2′-disubstituted bis(3-buten-4-olides) and diamines

The ring-opening polyaddition of 2,2′-disubstituted bis(3-buten-4-olides) with aliphatic diamines in m-cresol at room temperature afforded in quantitative yields polyamides with a pendant ketone moiety having inherent viscosities of up to 0.7. On the other hand, the polymerization in m-cresol at 80°C with acidic catalysts and at 160°C without any catalyst yielded directly polypyrrolones, a novel class of polyheterocycles. The cyclodehydration of the open-chain polyamides to polypyrrolones was also achieved by simply treating the polyamide films with methanolic hydrochloric acid at room temperature. Both of the polymers were generally soluble in hot polar solvents such as dimethylformamide, m-cresol, and nitrobenzene. The polypyrrolones began to lose weight gradually at around 250°C in nitrogen as determined by thermogravimetric analysis, while the thermograms in air showed an appreciable weight increase at about 230°C.     

Substituent effect on supercapacitive performances of conducting polymer‐based redox electrodes: Poly(3′,4′‐bis(alkyloxy) 2,2′:5′,2″‐terthiophene) derivatives

This work reports the synthesis of novel poly(3′,4′‐bis(alkyloxy)terthiophene) derivatives (PTTOBu, PTTOHex, and PTTOOct) and their supercapacitor applications as redox‐active electrodes. The terthiophene‐based conducting polymers have been derivatized with different alkyl pendant groups (butyl‐, hexyl‐, and octyl‐) to explore the effect of alkyl chain length on the surface morphologies and pseudocapacitive properties. The electrochemical performance tests have revealed that the length of alkyl substituent created a remarkable impact over the surface morphologies and charge storage properties of polymer electrodes. PTTOBu, PTTOHex, and PTTOOct‐based electrodes have reached up to specific capacitances of 94.3, 227.3, and 443 F g⁻¹ at 2.5 mA cm⁻² constant current density, respectively, in a three‐electrode configuration. Besides, these redox‐active electrodes have delivered satisfactory energy densities of 13.5, 29.3, and 60.7 W h kg⁻¹ and power densities of 0.98, 1, and 1.1 kW kg⁻¹ with good capacitance retentions after 10,000 charge/discharge cycles in symmetric solid‐state micro‐supercapacitor devices. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 480–495     

Eine Suche nach 3′-Epilutein ( = (3R,3′S,6′R)-β,ε-Carotin-3,3′-diol) und 3′, O-Didehydrolutein (=(3R, 6′R)-3-Hydroxy-β,ε-carotin-3′-on) in Eigelb,in Blüten von Caltha palustris und in Herbstblättern

Search for the Presence in Egg Yolk, in Flowers of Caltha palustris and in Autumn Leaves of 3′-Epilutein ( =(3R,3′S,6′R)-β,ε-Carotene-3,3′-diol) and 3′,O-Didehydrolutein ( =(3R,6′R)-3-Hydroxy-β,ε-carotene-3′-one) 3′.O-Didehydrolutein ( =(3R, 6′R)-3-hydroxy-β,ε-carotene-3′-one; 2) has been detected in egg yolk and in flowers of Caltha palustris. This is the first record for its occurrence in a plant. The compound shows a remarkable lability towards base; therefore, it may have been overlooked til now, because it is destroyed under the usual conditions of saponification of the carotenoid-esters. One of the many products formed from 2 with 1% KOH in methanol has been purified and identified as the diketone 3 ( =(3R)-3-hydroxy-4′, 12′-retro-β,β-carotene-3′,12′-dione). The identification of this transformation product from lutein might throw a new light on the metabolism of this important carotenoid in green plants. 3′-Epilutein ( =(3R,3′S,6′R)-β,ε-carotene-3,3′-diol; 1) was not detected in egg yolk, but is present besides lutein in flowers of C. palustris, thus confirming an earlier report of the occurrence of an isomeric (possibly epimeric) lutein (‘calthaxanthin’) in that plant [21]. We were not able to detect even traces of 1 or 2 in the carotenoid fraction from autumn leaves of Prunus avium (cherry), Parrotia persica, Acer montanum (maple) and yellow needles of Larix europaea (larch). α-Cryptoxanthin (4) , a very rare carotenoid, was isolated in considerable quantity for the first time from flowers of C. palustris.     

Synthesis and characterization of novel polyimides with 2,2‐bis[4(4‐aminophenoxy)phenyl]phthalein‐3′,5′‐bis(trifluoromethyl)anilide

2,2‐Bis[4(4‐aminophenoxy)phenyl]phthalein‐3′,5′‐bis(trifluoromethyl)anilide (6FADAP), containing fluorine and phthalimide moieties, was synthesized via the Williamson ether condensation reaction from 1‐chloro‐4‐nitrobenzene and phenolphthalein‐3′,5′‐bis(trifluoromethyl)anilide, which was followed by hydrogenation. Monomers such as 2,2‐bis[4(4‐aminophenoxy)phenyl]phthalein‐anilide containing phthalimide groups and 2,2‐bis[4(4‐aminophenoxy)phenyl]phthalein containing only phthalein moieties were also synthesized for comparison. The monomers were first characterized by Fourier transform infrared (FTIR), ¹H NMR, ¹⁹F NMR, elemental analysis, and titration and were then used to prepare polyimides with 2,2‐bis(3,4‐dicarboxyphenyl)hexafluoropropane dianhydride. The polyimides were designed to have molecular weights of 20,000 g/mol via off‐stoichiometry and were characterized by FTIR, NMR, gel permeation chromatography (GPC), differential scanning calorimetry, and thermogravimetric analysis. Their solubility, water absorption, dielectric constant, and refractive index were also evaluated. The polyimides prepared with 6FADAP, containing fluorine and phthalimide moieties, had excellent solubility in N‐methylpyrrolidinone, N,N‐dimethylacetamide, tetrahydrofuran, CHCl₃, tetrachloroethane, and acetone, and GPC analysis showed a molecular weight of 18,700 g/mol. The polyimides also exhibited a high glass‐transition temperature (290 °C), good thermal stability (～500 °C in air), low water absorption (1.9 wt %), a low dielectric constant (2.81), a low refractive index, and low birefringence (0.0041). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3361–3374, 2003     

Photochemical Reactions. 126th Communication. Photochemistry of an α, β: δ, ε-unsaturated ketone: 4-(2′, 7′, 7′-Trimethylbicyclo [3.2.0]hept-2′-en-1′-yl)-3-buten-2-one

On ¹n,π*-excitation, the title compound 2 undergoes a photoinduced intramolecular [4 + 2]-cycloaddition affording the tetracyclic enol ether 3 as the only product in 79% yield. The assigned structure of 3 was confirmed by its conversion to the p-nitrobenzoate 6 whose structure was determined by X-ray analysis.     

(1H‐Pyrazole‐κN2)(2,2′:6′,2′′‐terpyridine‐κ3N,N′,N′′)platinum(II) bis(perchlorate) nitromethane monosolvate

The reaction between [PtCl(terpy)]·2H₂O (terpy is 2,2′:6′,2′′‐terpyridine) and pyrazole in the presence of two equivalents of AgClO₄ in nitromethane yields the title compound, [Pt(C₃H₄N₂)(C₁₅H₁₁N₃)](ClO₄)₂·CH₃NO₂, as a yellow crystalline solid. Single‐crystal X‐ray diffraction shows that the dicationic platinum(II) chelate is square planar with the terpyridine ligand occupying three sites and the pyrazole ligand occupying the fourth. The torsion angle subtended by the pyrazole ring relative to the terpyridine chelate is 62.4 (6)°. Density functional theory calculations at the LANL2DZ/PBE1PBE level of theory show that in vacuo the lowest‐energy conformation has the pyrazole ligand in an orientation perpendicular to the terpyridine ligand (i.e. 90°). Seemingly, the stability gained by the formation of hydrogen bonds between the pyrazole NH group and the perchlorate anion in the solid‐state structure is sufficient for the chelate to adopt a higher‐energy conformation.