Preparation of polyamides via the phosphorylation reaction. X. A study of higashi reaction conditions

We report a study of the conditions of the phosphorylation reaction for the preparation of aromatic polyamides using the Higashi reaction medium. For poly(p-phenylene terephthalamide) (PPD-T), the optimum conditions are: reaction temperature, 115°C; monomer concentration, C = 0.083 mol/L; and ratio of triphenyl phosphite (TPP) to monomer, 2.0. These optimum conditions produce PPD-T having η_inh = 6.2 dL/g. At temperatures of 120°C and above PPD-T precipitates from the reaction mixture, leading to lower molecular weights. At lower temperatures the reaction mixture gels, and the gel time decreases with increasing reaction temperature. However, polycondensation continues in the gel state. Monomer concentrations C = 0.10 mol/L and above produce precipitation and yield polyamides of lower molecular weight. For the preparation of poly(p-benzamide) (PBA), the optimum ratio of TPP to monomer is 0.6 for either p- aminobenzoic acid or N-4-(4′-aminobenzamido)benzoic acid. In the former case the inherent viscosity of polymer prepared at 115°C showed little dependence upon the concentration of the monomer. The highest value, η_inh = 1.8 dL/g, was obtained with C = 0.40 mol/L and a TPP/monomer ratio of 0.6. However, for the same TPP/monomer ratio, the monomer containing a preformed amide linkage, N-4-(4′-aminobenzamido)benzoic acid, gave PBA with η_inh = 4.6 dL/g when the monomer concentration is 0.33 mol/L. This is the highest value reported for PBA using the phosphorylation reaction. In A?A + B?B polycondensation, examples in which one of the monomers contained one or two preformed amide linkages produced polyamides having η_inh = 7.8 and 8.9 dL/g, respectively.     

Studies on reactions of the N-phosphonium salts of pyridines. XIV. Wholly aromatic polyamides by the direct polycondensation reaction by using phosphites in the presence of metal salts

Poly-p-benzamide of high molecular weight (η_inh = ～ in H₂SO₄) was obtained by the direct polycondensation reaction of p-aminobenzoic acid (p-ABA) by means of diphenyl and triaryl phosphites in N-methylpyrrolidone (NMP)-pyridine solution containing lithium and calcium chlorides. Molecular weight of polymer varied with the amount of these salts, showing maximum values at the concentration of about 4 wt-% of LiCl or about 8 wt-% of CaCl₂ in the reaction mixture. The reaction temperature at around 80°C gave a polymer of the highest viscosity. The polycondensation reaction was also affected by monomer concentration, solvents, and tertiary amines like pyridine. Similarly, aromatic polyamides with high molecular weight (η_inh values up to 1.34 in H₂SO₄) were prepared from isophthalic acid and aromatic diamines, whereas terephthalic acid gave only low-viscosity polymers.     

Polymers containing polyhedral borane rings I. Condensation polymers

The preparation and properties of a unique new class of polymers containing polyhedral borane cages as part of the backbone polymer chain are described. The synthesis of polyamides, polyesters, polyureas, and polyurethanes proceeds from suitably chosen B₁₀ and B₁₂ polyhedral borane dicarbonyls, diols, and diisocyanates by typical condensation polymer techniques. Each complementary monomer may be a borane compound, but more often higher molecular weight products are provided when one monomer is a conventional organic reagent such as an aromatic diisocyanate. The polyamides prepared from 1, 12-B₁₂H₁₀(CO)₂ and organic diamines were crystalline and soluble, but molecular weight were limited because the amidation reaction was reversible and/or the amide linkage could be split by nucleophilic attack by some solvents. The polyurethanes prepared from Na₂B₁₂H₁₀(OH)₂ and aromatic diisocyanates were high molecular weight and relatively more stable. Clear, colorless, tough films were prepared. These polymers were soluble in many polar solvents and exhibited typical polyelectrolyte behavior.     

Synthesis of new ordered aromatic polyester copolymers

Aromatic polyesters of 3,5-di-tert-butyl-4-hydroxybenzoic acid and 3,5-diisopropyl-4-hydroxybenzoic acid were prepared. The polymers were found to be high-melting but largely insoluble in organic solvents. The polymer based on 3,5-di-tert-butyl-4-hydroxy-benzoic acid was not degraded to monomer by sulfuric acid. A number of new aromatic polyesters were also prepared. Several new monomers for aromatic polyesters were synthesized, including bis(2,5-di-tert-butyl-4-carbophenoxyphenyl)terephthalate, m- and p-phenylene bis(3,5-di-tert-butyl-4-hydroxybenzoate), bis(2,6-di-tert-butyl-4-chlorocarboxyphenyl)terephthalate, and m-phenylene bis(3,5-diisopropyl-4-hydroxybenzoate). An aromatic polyester prepared from bis(2,6-di-tert-butyl-4-chlorocarboxyphenyl) terephthalate and resorcinol had a η_inh (trichloroethylene) of 1.05 (0.5%, 30°C) and a possible melting point of 330°C (DSC). Tough, creasable films could be cast from trichloroethylene solution of this polymer. Attempts to observe or to trap the keto-ketene that might result when 3,5-di-tert-butyl-4-hydroxybenzoyl chloride is treated with base were unsuccessful.     

Copolymerization behavior of direct polycondensation of AB2 and AB monomers that forms hyperbranched aromatic polyamide copolymers

The copolymerization behavior of the one‐step direct polycondensation of 3,5‐bis‐(4‐aminophenoxy)benzoic acid (AB₂ monomer) and 3‐(4‐aminophenoxy)benzoic acid (AB monomer) was investigated by IR and ¹³C NMR measurements. IR measurements revealed that the content of the AB₂ units in the polymer was higher in the early stages of polymerization. ¹³C NMR spectra of the polymers indicated that the number of dendritic units increased slowly with increasing reaction time. The stepwise copolymerization of the AB₂ and AB monomers was also carried out, and the structure was analyzed by ¹³C NMR measurements. Copolymer synthesized stepwise by adding AB₂ monomer first (polymer II ) had more dendritic units and less terminal units as compared with the one‐step copolymer (polymer I ). Copolymer synthesized stepwise by adding AB monomer first gave a resulting copolymer (polymer III ) composed of long AB chains. The solubility of the stepwise copolymers was low, and the inherent viscosity was high in comparison with the one‐step copolymer as a result of the difference in architecture of the copolymers. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3304–3310, 2001     

Preparation and properties of N-phenylated aromatic polyamides from N,N′-diphenyl-p-phenylenediamine and aromatic diacid chlorides

N-Phenylated aromatic polyamides and copolyamides derived from N,N′-diphenyl-p-phenylenediamine, isophthaloyl, and terephthaloyl chloride were prepared by high-temperature solution polycondensation in anisole at 155°C. Factors that influenced the reaction, such as monomer concentration, solvent, temperature, and time, were studied to determine the optimum conditions for the preparation of high molecular weight polymers. Compared with analogous unsubstituted aromatic polyamides, the N-phenylated polymers exhibited better solubility in chlorinated and amide solvents, reduced crystallinity, and lower glass transition temperatures (above 200°C). All polymers except the polyterephthalamide could be solvent-cast, as well as hot-pressed, into transparent flexible films.     

Hydroxyl‐terminated hyperbranched aromatic poly(ether‐ester)s: Synthesis,characterization, end‐group modification,and optical properties

Novel AB₂‐type monomers such as 3,5‐bis(4‐methylolphenoxy)benzoic acid ( monomer 1 ), methyl 3,5‐bis(4‐methylolphenoxy) benzoate ( monomer 2 ), and 3,5‐bis(4‐methylolphenoxy)benzoyl chloride ( monomer 3 ) were synthesized. Solution polymerization and melt self‐polycondensation of these monomers yielded hydroxyl‐terminated hyperbranched aromatic poly(ether‐ester)s. The structure of these polymers was established using FTIR and ¹H NMR spectroscopy. The molecular weights (M_w) of the polymers were found to vary from 2.0 × 10³ to 1.49 × 10⁴ depending on the polymerization techniques and the experimental conditions used. Suitable model compounds that mimic exactly the dendritic, linear, and terminal units present in the hyperbranched polymer were synthesized for the calculation of degree of branching (DB) and the values ranged from 52 to 93%. The thermal stability of the polymers was evaluated by thermogravimetric analysis, which showed no virtual weight loss up to 200 °C. The inherent viscosities of the polymers in DMF ranged from 0.010 to 0.120 dL/g. End‐group modification of the hyperbranched polymer was carried out with phenyl isocyanate, 4‐(decyloxy)benzoic acid and methyl red dye. The end‐capping groups were found to change the thermal properties of the polymers such as T_g. The optical properties of hyperbranched polymer and the dye‐capped hyperbranched polymer were investigated using ultraviolet‐absorption and fluorescence spectroscopy. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5414–5430, 2008     

Polyamides with pendant 1,3,4-oxadiazole and pyridine moieties

A novel aromatic diamine,2-（5-（3,5-diaminophenyl）-l,3,4-oxadiazole-2-yl）pyridine（POBD）,containing a pyridine ring and a 1,3,4-oxadiazole moiety,was synthesized.It was used in a polycondensation with various aromatic and aliphatic diacid chlorides to generate a series of new aromatic polyamides with pendant 1,3,4-oxadiazole groups.The prepared polyamides were characterized by IR,elemental analysis and through the synthesis of model compounds.Thermophysical properties of the synthesized polyamides have been studied by DSC,TGA and inherent viscosity measurements. Relatively high inherent viscosity values（0.76-1.62 dL/g,in 0.125%H₂SO₄ at 25℃） were observed for these compounds. Number average molecular weight（M_n） of the polymers was measured by vapor phase osmometry（VPO）.The introduction of bulky side chains in the structure of aromatic polyamides led to increased solubility of these polymers in common polar and aprotic solvents,such as DMF,DMSO,NMP and DMAc,which allowed thin films to be cast from polymer solutions. The highest molecular weight（M_n = 51190） was observed for polymer（DC）,which was prepared from pyridine-2,6-dichlorocarbonyl.     

Microwave step‐growth polymerization of 5‐(4‐methyl‐2‐phthalimidylpentanoylamino)isophthalic acid with different diisocyanates

The utilization of microwave energy in polymer synthesis is a fast growing field of research leading to a more rapid and cleaner polymerization process. In order to synthesize novel optically active monomer 5‐(4‐methyl‐2‐phthalimidylpentanoylamino)isophthalic acid ( 6 ), the reaction of phthalic anhydride with l ‐leucine was carried out in an acetic acid solution and 4‐methyl‐2‐phthalimidylpentanoic acid as an imide acid was obtained in good yield. Then, it was converted to 4‐methyl‐2‐phthalimidylpentanoyl chloride by treatment with thionyl chloride. This acid chloride was reacted with 5‐aminoisophthalic acid and the novel bulky aromatic amide‐imide chiral monomer 6 was obtained in high yield and was characterized with spectroscopy techniques as well as specific rotation and elemental analysis. Polycondensation of monomer 6 with different diisocyanates such as 4,4′‐methylenebis(phenyl isocyanate), toluene‐2,4‐diisocyanate, isophorone diisocyanate, and hexamethylene diisocyanate was performed by two different methods: microwave irradiation and classical heating polymerization techniques in the presence of various catalysts and without a catalyst. The microwave polymerization technique provides a new way for the production of polymers at high rates. The resulting novel optically active polyamides have inherent viscosities in the range of 0.25–0.63 dl/g. They show good thermal stability and are soluble in amide‐type solvents. The obtained polyamides were characterized by FT‐IR, ¹H‐NMR spectroscopy, elemental analyses, specific rotation, and thermal analyses methods. Copyright © 2008 John Wiley & Sons, Ltd.     

New organosoluble and thermally stable poly(amide‐imide)s with benzoxazole or benzothiazole pendent groups: synthesis and characterization

Two new benzoxazole or benzothiazole‐containing diimide‐dicarboxylic acid monomers, such as 2‐[3,5‐bis(N‐trimellitimidoyl)phenyl]benzoxazole ( 2 _o ) or 2‐[3,5‐bis(N‐trimellitimidoyl)phenyl]benzothiazole ( 2 _s ) were synthesized from the condensation reaction between 3,5‐diaminobenzoic acid and 2‐aminophenol or 2‐aminothiophenol in polyphosphoric acid (PPA) with subsequent reaction of trimellitic anhydride in the presence of glacial acetic acid, respectively, and two new series of modified aromatic poly(amide‐imide)s were prepared. This preparation was done with pendent benzoxazole or benzothiazole units from the newly synthesized diimide‐dicarboxylic acid and various aromatic diamines by triphenyl phosphite‐activated polycondensation. In addition, the corresponding unsubstituted poly(amide‐imide)s were prepared under identical experimental conditions for comparative purposes. Characterization of polymers was accomplished by inherent viscosity measurements, FT‐IR, UV–visible, ¹H‐NMR spectroscopy and thermogravimetry. The polymers were obtained in quantitative yields with inherent viscosities between 0.39 and 0.81 dl g^?1. The solubilities of modified poly(amide‐imide)s in common organic solvents as well as their thermal stability were enhanced compared to those of the corresponding unmodified poly(amide‐imide)s. The glass transition temperature, 10% weight loss temperature, and char yields at 800°C were, respectively, 7–26°C, 17–46°C and 2–5% higher than those of the unmodified polymers. Copyright © 2010 John Wiley & Sons, Ltd.     

Soluble aromatic polyamides modified by incorporation of 1,2,4-triazole and pentadecyl units into the backbone of polymer

Abstract

A new series of soluble aromatic polyamides was synthesized by low temperature solution polycondensation of novel aromatic diamine namely 3,5-bis-(4′-amino phenyl)-4-(4″-methoxy-2″-pentadecyl phenyl) 1,2,4-triazole (VII) with aromatic diacid chlorides, viz. isophthaloyl chloride (IPC) and terephthaloyl chloride (TPC). The aromaticdiamine (VII) was characterized by elemental analysis, FT-IR, NMR (¹H, ¹³C), and mass spectrometry. Copolyamides were also synthesized by employing various mole proportions of IPC and TPC with diamine (VII). Inherent viscosities of these polyamides were in the range of 0.50–0.65 dL/g in DMAc, indicating formation of moderate to high molecular weight of polyamides. These polyamides showed good solubility in polar aprotic solvents such as N,N-Dimethyl acetamide (DMAc), N-Methyl 2-pyrrolidone (NMP), N, N, Dimethyl formamide (DMF), and Dimethyl sulphoxide (DMSO), which may be due to incorporation of pendant methoxyphenyl moiety with pentadecyl units. The amorphous morphology of polyamides as evidenced by XRD. These polyamides had lower glass transition temperatures; as determined by DSC, compared to the T_g of conventional aromatic polyamides due to internal plasticization effect of long alkyl pentadecyl group. Polymers showed good thermal stability, with initial decomposition temperature above 300?°C.     

Synthesis and characterization of new soluble polyamides containing phthalimide pendent group

A dicarboxylic acid monomer, 5-phthalimidoisophthalic acid, containing a phthalimide pendent group was prepared by the condensation of 5-aminoisophthalic acid and phthalic anhydride in glacial acetic anhydride. The monomer was reacted with various aromatic diamines to produce polyamides using triphenyl phosphite and pyridine as condensing agents. These polyamides were produced with inherent viscosities of 0.64–1.14 dL · g⁻¹. All the polymers, characterized by wide-angle X-ray diffraction, revealed an amorphous nature resulting from the presence of the bulky pendent group. These polyamides exhibited excellent solubility in a variety of solvents such as N- methyl-2-pyrrolidinone, N,N-dimethylacetamide (DMAc), N,N-dimethylformamide, dimethyl sulfoxide, pyridine, and cyclohexanone. These polyamides showed glass-transition temperatures (T_g's) between 247 and 273 °C (by DSC) and 248 and 337 °C (by a dynamic mechanical analyzer). The thermogravimetric analytic measurement revealed the decomposition temperature at 10% weight-loss temperatures (Td₁₀) ranging from 442 to 530 °C in nitrogen. The polyamides containing phthalimide groups exhibited higher T_g and Td₁₀ values than those having no phthalimide groups. Transparent, tough, and flexible films of these polyamides could be cast from the DMAc solutions. These casting films had tensile strengths ranging from 81 to 126 MPa, elongations at break ranging from 7 to 13%, and tensile moduli ranging from 2.0 to 2.9 GPa. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1557–1563, 2001     

新型超支化聚芳酰胺的合成及表征

以3，5—二硝基苯甲酰氯和对氨基苯甲酸为原料，经两步反应合成了新型AB2型单体4—(3，5-二氨基苯甲酰氨基)苯甲酸。在溶液中通过自缩聚反应合成了新型超支化聚芳酰胺，将其活性端氨基与酰氯反应，经原位改性合成了五种封端的超支化聚芳酰胺，并利用IR、^1HNMR、DSC及TG等方法对所合成的六种新型超支化聚合物的结构和性能进行了表征与测试。     

Synthesis and properties of soluble aromatic polyamides derived from 2,2′‐bis(4‐carboxyphenoxy)‐9,9′‐spirobifluorene

The synthesis of a new bis(ether carboxylic acid), 2,2′‐bis(4‐carboxyphenoxy)‐9,9′‐spirobifluorene, in which two orthogonally arranged carboxyphenoxyfluorene entities are connected through an sp³ carbon atom (the spiro center), is reported. The direct phosphorylation polycondensation of this diacid monomer with various aromatic diamines yields aromatic polyamides containing 9,9′‐spirobifluorene moieties in the main chain. The presence of the spiro segment restricts the close packing of the polymer chains and decreases interchain interactions, resulting in amorphous polyamides with enhanced solubility, and high glass‐transition temperatures and good thermal stability are maintained through controlled segmental mobility. The glass‐transition temperatures of these polyamides are in the range of 234–306 °C, with 10% weight losses occurring at temperatures above 530 °C. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1160–1166, 2003     

Aromatic polyamides. IV. A novel synthesis of sulfonated poly(para-phenyleneterephthalamide): Polymerization of terephthalic acid and para-phenylenediamine in sulfur trioxide

A novel polyamide condensation reaction of aromatic diamines (usually as strong inorganic acid salts) and aromatic diacids in SO₃ has been discovered. para-Phenylenediamine was polymerized with terephthalic acid in SO₃ at 20–47% polymer concentration to form highly anisotropic (liquid crystalline) sulfonated poly(p-phenyleneterephthalamide) (SPT) solutions (dopes) with inherent viscosities as high as 1.6. Sulfonation of the aromatic diamine ring was a major side reaction. The effects of reaction variables such as temperature, time, monomer concentration, stoichiometry, and solvent acidity on molecular weight were studied. The dopes were spun to fiber, but tensile properties were limited by coagulation problems associated with hydrophilicity of the highly sulfonated polymer. Thermogravimetric analysis of SPT at 20°C/min showed weight loss only above 450°C.     

Synthesis and Radical Polymerization of N‐[4‐N′‐(Phenylamino‐carbonyl)phenyl]maleimide and its Copolymerization with Methyl Methacrylate

A novel type of imide‐amide monomer, 4‐maleimidobenzanilide (MB) i.e., N‐[4‐N′‐(phenylaminocarbonyl)phenyl]maleimide was synthesized from maleic anhydride, p‐aminobenzoic acid and aniline. Radical polymerization of MB and its copolymerization with MMA (methyl methacrylate), initiated by AIBN, were performed in THF solvent at 65°C. Nine copolymer samples were prepared using different feed ratios of comonomers. All the polymer samples have been characterized by a solubility test, intrinsic viscosity measurements, FT‐IR and ¹H‐NMR spectral analysis, and thermo‐gravimetric analysis. The values of monomer reactivity ratios of MB‐MMA system (r₁, r₂) and the Alfrey‐Price parameters Q₁ and e₁ were determined.     

Photodegradation of aramids. II. Irradiation in air

A series of isomeric fully aromatic polyamides (aramids) were photodegraded in the presence of oxygen. Films and fibers of these aramids gave carboxylic acids as the major products when measured by infrared spectroscopy and potentiometric titration. These acids probably resulted from the oxygen interception of the radicals generated by photocleavage of the amide bonds. In contrast to results found upon irradiation in the absence of oxygen, carboxylic acid formation was accompanied by a rapid loss in molecular weight, and a decrease in useful mechanical properties. Quantum yields for carboxylic acid formation were ≤5.5 × 10^?5 mole/einstein and decreased along the aramid series roughly in agreement with increases in T_g. The photo-Fries rearrangement product was observed in aramid fibers irradiated in air, whereas no rearrangement product was seen in films irradiated in air.     

Preparation and properties of polyamides from 2,8-phenoxathiin-bis-(γ-ketobutyric acid), 2,7-thianthrene-bis(γ-ketobutyric acid), and aromatic diamines

Aromatic-aliphatic polyamides containing phenoxathiin and thianthrene heterocyclic units were prepared by the direct polycondensation of 2,8-phenoxathiin-bis(γ-ketobutyric acid) ( I ) or 2,7-thianthrene-bis(γ-ketobutyric acid) (II) with various aromatic diamines in a triphenylphosphite-pyridine system. Prior to polymer synthesis two model diamides were prepared by condensing γ-keto acid I or II with p-toluidine. The model diamides and polyamides were characterized by spectral methods and elemental analysis. The polyamides, obtained in 56–90% yields, had inherent viscosities in the 0.82–1.1 dL/g range in concentrated H₂SO₄ at 30°C. The effect of heterocyclic units on polymer properties, such as solubility, crystallinity, and thermal stability has been discussed.     

Synthesis and properties of polyurethane elastomers crosslinked with amine-terminated AB2-type hyperbranched polyamides

Amine-terminated AB₂-type hyperbranched polyamides of different molecular weights were prepared from 3,5-bis-(4-aminophenoxy)benzoic acid (AB₂ monomer) by fractional precipitation technique and characterized by FTIR, ¹H-NMR spectroscopies, DSC and GPC techniques. The degree of branching (DB) of hyperbranched polymers (HBP) was determined using ¹³C-NMR spectroscopy and it was found that the value increased with decrease in molecular weight of polymer considered. As the molecular weight distribution was narrow, the approximate number of end functional groups of each HBP was conveniently calculated. Three polymers were selected and used as crosslinkers in the preparation of polyurethanes. The incorporation of hyperbranched polyamide into the polyurethane chains was confirmed using FTIR and ¹H-NMR spectroscopic techniques. Among the range studied (1-6%), it was found that high tensile strength is attained with 1% of HBP. It was also found that the tensile strength decreases with increase in number of end functional groups and decrease in DB of HBP. However, glass transition temperatures and thermal stability of polyurethanes crosslinked with up to 6% of HBP, above which gelation occurred, were not affected and similar to the blank polymer prepared without AB₂ polymer.     

Synthesis and characterization of polyamides containing pendant pentadecyl chains

A new aromatic diacid monomer viz., 4-(4′-carboxyphenoxy)-2-pentadecylbenzoic acid was synthesized starting from cardanol and was characterized by FTIR, ¹H- and ¹³C NMR spectroscopy. A series of new aromatic polyamides containing ether linkages and pendant pentadecyl chains was prepared by phosphorylation polycondensation of 4-(4′-carboxyphenoxy)-2-pentadecylbenzoic acid with five commercially available aromatic diamines viz., 1,4-phenylenediamine, 4,4′-oxydianiline, 4,4′-methylenedianiline, 1,3-phenylenediamine, and 4,4′-(hexafluoroisopropylidene)dianiline. Inherent viscosities of the polyamides were in the range 0.45-0.66 dL/g in N,N-dimethylacetamide at 30 ± 0.1 °C. The introduction of ether linkages and pendant pentadecyl chains into polyamides led to an enhanced solubility in N,N-dimethylacetamide and 1-methyl-2-pyrrolidinone at room temperature or upon heating. The polyamides could be solution-cast into tough, flexible and transparent films from their N,N-dimethylacetamide solution. Wide angle X-ray diffraction patterns exhibited broad halo indicating that the polymers were essentially amorphous in nature. X-Ray diffractograms also displayed a diffuse to sharp reflection in the small-angle region (2θ = ∼2-5°) for the polyamides characteristics of formation of loosely to well-developed layered structure arising from packing of flexible pentadecyl chains. The glass transition temperature observed for the polyamides was in range 139-189 °C. The temperature at 10% weight loss (T₁₀), determined by TGA in nitrogen atmosphere, of the polyamides was in the range 425-453 °C indicating their good thermal stability.