聚氧化乙烯和聚醋酸乙烯酯共混热力学参数的理论估算

实验测定了聚氧化乙烯（ＰＥＯ）和聚醋酸乙烯酯（ＰＶＡｃ）的共混热以及共混组分的热压系数和热膨胀系数．并由上述实测值计算了状态方程参数．用Ｈａｍａｄａ~［１－２］等改进的Ｆｌｏｒｙ状态方程理论估算了ＰＥＯ／ＰＶＡｃ混体系的交换能参数（Ｘ_１２）、相互作用参数（ｘ_１２／ｒ_１）和剩余混合体积（Ｖ~Ｅ／Ｖ~０）．     

苯乙烯—丙烯酸钠共聚物改性PET结晶行为的研究

本文用DSC和FT-IR方法研究了PET/苯乙烯-丙烯酸钠共聚物共混体系的相溶性、等温结晶动力学、组成、温度等因素对结晶速率、结晶度等结晶行为的影响,并初步探讨了离聚物对PET的作用。     

Enantioselective polymerization of γ-benzyl-DL-glutamate N-carboxy anhydride in the presence of poly(γ-benzyl-L-glutamate)

The polymerization of γ-benzyl-DL -glutamate NCA in the presence of poly(γ-benzyl-L -glutamate) was investigated. At the initial stage the D -enantiomer was preferentially polymerized (ca. 35% ee) by using triethylamine as an initiator. Enantioselectivity was independent of the molecular weight of preformed poly(γ-benzyl-DL -glutamate).     

A distribution kinetics approach for crystallization of polymer blends

The cluster distribution approach is extended to investigate the crystallization kinetics of miscible polymer blends. Mixture effects of polymer-polymer interactions are incorporated into the diffusion coefficient. The melting temperature, activation energy of diffusion, and phase transition enthalpy also depend on the blending fraction and lead to characteristic kinetic behavior of crystallization. The influence of different blending fractions is presented through the time dependence of polymer concentration, number and size of crystals, and crystallinity (in Avrami plots). Computational results indicate how overall crystallization kinetics can be expressed approximately by the Avrami equation. The nucleation rate decreases as the blending fraction of the second polymer component increases. The investigation suggests that blending influences crystal growth rate mainly through the deposition-rate driving force and growth-rate coefficient. The model is further validated by simulating the experimental data for the crystallization of a blend of poly(vinylidenefluoride)[PVDF] and poly(vinyl acetate)[PVAc] at various blending fractions.     

A study of three-layered latex interpenetrating polymer networks used as processing modifiers and impact modifiers of thermo-plastic resins

In this paper, the latex interpenetrating polymer network poly(n-butyl acrylate) polystyrene/poly(methyl methacrylate) (PBA/PS/PMMA, or PBSM) was synthesized by microagglomeration and three-stage emulsion polymerization. The initial poly(n-butyl acrylate) latex particle was agglomerated by methacrylic acid residue containing the polymer latex and then encapsulated by PS and PMMA. The polyblend of poly(vinyl chloride) (PVC) and PBSM (PVC/PBSM) was prepared by blending PVC and PBSM. The morphology and properties of the polyblend have been studied. Experimental results have shown that the processability and impact-resistance of PVC can be enhanced considerably by means of blending 6–20 per hundred resin (phr) PBSM. The three-layered latex interpenetrating polymer network is a promising modifier for rigid PVC (RPVC) manufactures.     

Block Polymers Derived from Poly(ethylene Oxide) and Carboxyl-Terminated Polybutadiene

The use of preformed poly(ethylene oxide) (PEO) and carboxyl-terminated polybutadiene (CTPB) for the preparation of block polymers is reported. Block polymerization was carried out by esterification and by coupling of equimolar amounts of these polymers with 2,4-toluene diisocyanate (TDI). When esterification was carried out, conversion of the two preformed polymers and block polymer composition varied with reaction temperature, catalyst used, and molecular weight of the PEO. Full conversions were not obtained. Better results were achieved when the preformed polymers were coupled with TDI. Tensile properties and water absorption capability of these block polymers were determined. Hydrogels with high water content up to 82% were obtained.     

Plasticization of biodegradable stereocomplex polylactides with poly(propylene glycol)

The plasticization of stereocomplex polylactide (scPLA) with poly(propylene glycol) (PPG) is described. The poly(L-lactide) (PLLA), poly(D-lactide) (PDLA) and PPG were completely blended in chloroform before film casting to prepare scPLA/PPG blend films. The PLLA/PDLA ratio was fixed at 50/50 (w/w). The PPG blending enhanced the stereocomplex formation of the scPLA films. The stereocomplex crystallinities of the scPLA films increased as the PPG blend ratio increased, the PPG molecular weight decreased and the PDLA molecular weight decreased. The PPG blending significantly decreased the T _g and film transparency, and improved the elongation at break of the scPLA films. The results indicated that the PPG blending had an effect on the stereocomplexation and it improved the flexibility of the scPLA films.     

SINGLE IONIC CONDUCTI0N OF POLYSILOXANE CONTAINING PROPYLENE CARBONATE GROUP AND LITHIUM POLYMERIC SALTS

The polysiloxane containing propylene carbonate side group and several lithium poly-meric salts were synthesized. The structure were confirmed by IR, NMR and XPS. Theblending systems of polysiloxane containing propylene carbonate group with different lithiumpolymeric salts were studied by ion conductivity XPS and DSC. Different lithium poly-meric salts in the blending system lead to conductivity arranged in the following sequence:poly(lithium ethylenebenzene sulfonate methylsiloxane)>poly(lithium propionate methyl-siloxane)>poly(lithium propylsulfonate methylsiloxane)>poly(lithium styrenesulfonate).In the blending system the best single ion conductivity was close to 10~(-5) Scm~(-1) at roomtemperature. XPS showed that at low lithium salt concentration the conductivity increasedwith the increasing content of lithium salt, in consequence of the increase of free ion andsolvent separated ion pair. At high lithium salt concentration the free ion was absent andthe solvent-separated ion pair functioned as carrier.     

高特PET-PBT共混单丝的结构与性能

采用一定比例的聚对苯二甲酸丁二醇酯(PBT)对聚对苯二甲酸乙二醇酯(PET)进行共混改性纺制大直径单丝,通过对共混单丝的力学性能、扫描电子显微镜及热性能分析,研究了共混比例、后拉伸工艺对共混物的相容性和拉伸强度的影响.结果表明:通过PET-PBT共混,提高了单丝的勾结强度;液体冷却温度、拉伸倍率及拉伸温度是影响共混单丝...     

聚2,5-呋喃二甲酸乙二醇酯/聚丁二酸丁二醇酯共混物的制备与表征

通过熔融共混制备了聚2,5-呋喃二甲酸乙二醇酯(PEF)/聚丁二酸丁二醇酯(PBS)共混物,探究了制备PEF/PBS共混物的影响因素,考察了共混温度、共混时间、螺杆转速、共混比例对PEF/PBS共混物力学性能的影响因素,并用示差扫描量热仪、热失重、扫描电子显微镜等技术手段对其热性能和相容性进行了表征。 结果表明,当PBS的含量为15%、共混温度为230 ℃,共混时间为90 s、螺杆转速为150 r/min时,为最佳共混制备条件,此时相容性最好,热性能良好,冲击强度和拉伸强度最大,冲击强度相对纯PEF提高了6倍,拉伸强度提高了近20%,从而大幅提高了PEF的冲击强度,有效地增强了PEF的抗冲击韧性。 这些工作为这一生物基聚酯材料的应用提供了可能。     

Poly(vinyl chloride)‐based miscible blends: Changes induced in the structural characteristics and in dielectric α relaxation of pure poly(vinyl chloride)

In this work we investigate by means of dielectric relaxation spectroscopy how segmental motions occurring in poly(vinyl chloride) (PVC) are modified by blending of PVC with small amounts of two different homopolymers: crystalline poly(ϵ‐caprolactone) (PCL) and glassy syndiotactic poly(methylmethacrylate) (sPMMA). The dynamics of the α relaxation of PVC is severely changed by blending it with PCL or sPMMA becoming faster or slower, respectively. Simultaneously, the shape of the relaxation function is being importantly altered. It shows a stronger non‐Debye character being broader and strongly temperature‐dependent. This fact leads us to calculate distributions of relaxation times for the blends that are wider in comparison to the one obtained for pure PVC. Complementary X‐ray diffraction measurements have been performed in order to assure the absence of crystallinity in the blends, and some small variations can be deduced at the level of interchain structural correlations of PVC. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 234–247, 2000     

Fully biodegradable blends of poly(butylene succinate) and poly(butylene carbonate): Miscibility, thermal properties, crystallization behavior and mechanical properties

Fully biodegradable poly(butylene succinate) (PBS) and poly(butylene carbonate) (PBC) blends were prepared by melt blending. Miscibility, thermal properties, crystallization behavior and mechanical properties of PBS/PBC blends were investigated by scanning electron microscopy (SEM), phase contrast optical microscopy (PCOM), differential scanning calorimetry (DSC), wide angle X-ray diffraction (WAXD) and mechanical properties tests. The SEM and PCOM results indicated that PBS was immiscible with PBC. The WAXD results showed that the crystal structures of both PBS and PBC were not changed by blending and the two components crystallized separately in the blends. The isothermal crystallization data showed that the crystallization rate of PBS increased with the increase of PBC content in the blends. The impact strength of PBS was improved significantly by blending with PBC. When the PBC content was 40%, the impact strength of PBS was increased by nearly 9 times.     

A chemical view onto post-consumer poly(ethylene terephthalate) valorization through reactive blending with functionalized polyolefins

The recovery of poly(ethylene terephthalate) from post-consumer packaging products, such as beverage bottles, allowed to obtain flakes with a purity level suitable for reprocessing. Among many possibilities, the blending with polyolefins can provide toughened materials but, as poly(ethylene terephthalate) and polyolefins are immiscible, different methods of reactive compatibilization were followed to achieve a fine dispersion of polyolefln domains into a poly(ethylene terephthalate) matrix. In this meanwhile the use of a functionalized polyolefin, bearing reactive groups toward poly(ethylene terephthalate) terminals, is a promising route to obtain grafted copolymers acting as interface stabilizers. In particular, the use in the melt blending of ester or hydroxyl functionalized polyolefins in the presence of transesterification catalysts and/or anhydride functionalized polyolefins as compatibilizer precursors were both investigated by focusing onto chemical aspects. The prepared blends were analyzed through suitable fractionation methods, such as selective extractions, and spectroscopic analysis in order to identify the molecular architecture of the macromolecules resulting from the process and study their effectiveness at the interface region. Moreover the phase morphology and the thermo-mechanical properties were investigated and correlated to the structure of the macromolecular species in the system.     

Reactive-ion etch resistant polysulfones for microlithography

The various chemical approaches aimed at improving the reactive-ion etch resistance of poly(olefin sulfone)s are described. Resist systems based on incorporation of RIE-resistant moieties via random copolymerization, blending and block copolymer formation are described and lithographic properties noted.     

Oxidative polymerization of aniline on the surface of silica in the presence of poly(sulfonic acids) as a method of preparing efficient biosorbents

Polyaniline coatings on the surface of the macroporous silica have been prepared by oxidative polymerization via protonation of aniline by poly(sulfonic acids): poly(p,p′-(2,2′-disulfonic acid)diphenyle-neisophthalamide and poly(p,p′-(2,2′-disulfonic acid)diphenyleneterephthalamide. Two variants of modification have been studied: namely, the polymerization of aniline carried out in the presence of the preliminarily silaminated glass covered by poly(sulfonic acid) and the modification of silaminated glass by preformed complexes of poly(p,p′-(2,2′-disulfonic acid)diphenylenephthalamide-polyaniline. In both cases, the even polyaniline-containing polymer coating with a thickness of ～3 nm is formed on the support surface. Sorbents containing the poly(p,p′-(2,2′-disulfonic acid)diphenylenephthalamide-polyaniline complex are efficient for isolation of DNA from mixtures of biopolymers.     

Compatibility studies of styrene and hydroxyl containing styrene copolymers with poly(ethylene oxide)

Copolymers of styrene with vinylphenyl trifluoromethyl carbinol, p-vinylphenyl trifluoromethyl carbinol, vinylphenyl hexafluorodimethyl carbinol, and p-vinylphenol are conditionally compatible with poly(ethylene oxide), depending on their composition and blending ratios, whereas copolymers of styrene and vinylphenyl methyl carbinol are much less compatible with poly(ethylene oxide), as determined by T_g criteria and differential scanning calorimetry. The crystallinity of poly(ethylene oxide) is changed in the copolymer/poly(ethylene oxide) blends, as indicated by depressions of the poly(ethylene oxide) melting point. Hydrogen-bond formation has been studied in two selected blends by infrared (IR) spectroscopy. Hydrogen bonding dissociation and reassociation as a function of temperature are reported. The conformation changes of poly(ethylene oxide) in the blends, the interaction between copolymer and poly(ethylene oxide) as well as in the reference blend, polystyrene/poly(ethylene oxide), are also investigated.     

Influence of chain extender on thermal properties and melt flow index of stereocomplex PLA

The effects of chain extension and melt blending temperature on the stereocomplex formation of 50/50 (w/w) poly(L-lactide) (PLLA)/poly(D-lactide) (PDLA) blends or stereocomplex polylactides (scPLAs) were investigated. Joncryl^® ADR 4368, a styrene-acrylic multifunctional oligomeric agent, was used as a chain extender. Differential scanning calorimetry and X-ray diffractometry were used to confirm the stereocomplex formation of the PLLA/PDLA blends. Melt flow indices (MFI) of the blends were also determined. The stereocomplex crystallinities gradually decreased with increasing blending temperature and Joncryl^® ADR 4368 ratio. The significant decrease in the MFI of scPLAs is believed to be attributed to chain extension at the blending temperatures of 170 °C and 200 °C. The MFI values of scPLAs decreased as the Joncryl^® ADR 4368 ratio and blending temperature increased. The results indicated that the chain extension has an effect on the stereocomplexation and it improved the melt strength of the scPLAs.     

Pervaporation of alcohol-toluene mixtures through polymer blend membranes of poly(acrylic acid) and poly(vinyl alcohol)

Homogeneous membranes were prepared by blending poly(acrylic acid) with poly(vinyl alcohol). These blend membranes were evaluated for the selective separation of alcohols from toluene by pervaporation. The flux and selectivity of the membranes were determined both as a function of the blend composition and of the feed mixture composition. The results showed that a polymer blending method could be very useful to develop new membranes with improved permselectivity. The pervaporation properties could be optimized by adjusting the blend composition. All the blend membranes tested showed a decrease in flux with increasing poly(vinyl alcohol) content for both methanol—toluene and ethanol—toluene liquid mixtures. The alcohols permeated preferentially through all tested blend membranes, and the selectivity values increased with increasing poly(vinyl alcohol) content. The pervaporation characteristics of the blend membranes were also strongly influenced by the feed mixture composition. The fluxes increased exponentially with increasing alcohol concentration in the feed mixtures, whereas the selectivities decreased for both liquid mixtures.     

Methyl methacrylate oligomerically-modified clay and its poly(methyl methacrylate) nanocomposites

A methyl methacrylate oligomerically-modified clay was used to prepare poly(methyl methacrylate) clay nanocomposites by melt blending and the effect of the clay loading level on the modified clay and corresponding nanocomposite was studied. These nanocomposites were characterized by X-ray diffraction, transmission electron microscopy, thermogravimetric analysis and cone calorimetry. The results show a mixed intercalated/delaminated morphology with good nanodispersion. The compatibility between the methylacrylate-subsituted clay and poly(methyl methacrylate) (PMMA) are greatly improved compared to other oligomerically-modified clays.