Enantiomeric impurities in chiral synthons,catalysts, and auxiliaries: Part 3

The enantiomeric excess of chiral reagents used in asymmetric syntheses directly affects the reaction selectivity and product purity. In this work, 84 of the more recently available chiral compounds were evaluated to determine their actual enantiomeric composition. These compounds are widely used in asymmetric syntheses as chiral synthons, catalysts, and auxiliaries. These include chiral alcohols, amines, amino alcohols, amides, carboxylic acids, epoxides, esters, ketones, and oxolanes among other classes of compounds. All enantiomeric test results were categorized within five impurity levels (i.e., <0.01%, 0.01–0.1%, 0.1–1%, 1–10%, and >10%). The majority of the reagents tested were determined to have enantiomeric impurities over 0.01%, and two of them were found to contain enantiomeric impurities exceeding the 10% level. The most effective enantioselective analysis method was a GC approach using a Chiraldex GTA chiral stationary phase (CSP). This method worked exceedingly well with chiral amines and alcohols.     

Enantiomeric impurities in chiral catalysts,auxiliaries and synthons used in enantioselective synthesis

Eighty three popular chiral reagents that are used to synthesize a wide variety of compounds of high enantiomeric purity were analyzed in order to determine their enantiomeric composition. Included in the study are chiral catalysts for stereoselective reductions, epoxidations and hydrocarboxylations; chiral auxiliaries including a variety of oxazolidinones; a wide variety of chiral synthons and chiral resolving agents. Enantiomeric impurities were found in all reagents. The reagents were categorized by the level of their enantiomeric contaminants. The four level ranges were: 0.01% to 0.1%, 0.1% to 1%, 1% to 10% and >10%. Over half of the chiral reagents tested had enantiomeric impurities at levels >0.1%. The batch to batch enantiopurity of a reagent from a single source was examined as well as the variation in the enantiopurity of the same reagent from different sources. Possible adverse aspects of having unknown quantities of enantiomeric impurities in stereoselective syntheses are mentioned.     

Quantitative 1H NMR method for the routine spectroscopic determination of enantiomeric purity of active pharmaceutical ingredients fenfluramine, sertraline, and paroxetine

Determining the enantiomeric purity of chiral therapeutic agents is important in the development of active pharmaceutical ingredients (API). A strategy for determining the enantiomeric purity of three APIs was developed using nuclear magnetic resonance (NMR) and the chiral solvating agent (CSA) 1,1-bi-2-naphthyl (1). While chiral chromatography is widely used to evaluate enantiomeric purity, it can sometimes suffer from tedious sample preparation obviating rapid measurements that are sometimes needed during the manufacture of such agents. The techniques described herein provide comparable enantiomeric purity results with those obtained with traditional chiral HPLC and other published methods for these compounds. Chiral analysis of standard samples of methylbenzylamine enantiomeric mixtures using 1 were found to be quantitative to approximately 1% minor enantiomer. Enantiomeric purity determination by NMR utilizing chiral solvating agents do not require special instrumental techniques, chemical derivatization or standards and is therefore ideally suited for rapid routine analysis. As a result, the technique demonstrated is commonly used in our laboratory as a complementary or alternative method to chiral HPLC or optical rotation measurements for routine determination of enantiomeric purity.     

Enantiomeric impurities in chiral catalysts,auxiliaries, and synthons used in enantioselective syntheses. Part 4

The enantiomeric purity of chiral reagents used in asymmetric syntheses directly affects the apparent reaction selectivity and the product’s enantiomeric excess. Herein, 46 recently available chiral compounds were evaluated in order to determine their actual enantiomeric compositions. They have not been assayed previously and/or have been introduced after 2006, when the last comprehensive evaluation of commercially available chiral compounds was reported. These compounds are widely used in asymmetric syntheses as chiral synthons, catalysts, and auxiliaries. The enantioselective analysis methods include HPLC approaches using Chirobiotic, Cyclobond and LARIHC series chiral stationary phases, and GC approaches using Chiraldex chiral stationary phases. Accurate, efficient assays for selected compounds are given. All enantiomeric test results were categorized within five impurity levels (i.e., <0.01%, 0.01–0.1%, 0.1–1%, 1–10% and >10%). Different batches of the same reagent from the same company can have different levels of enantiomeric impurities. Many of the reagents tested were found to have less than 0.1% enantiomeric impurities. Only one of the chiral compounds was found to have an enantiomeric impurity exceeding 10%.     

手性溶剂-NMR法测定2,4-滴丙酸对映体纯度的定量分析

研究了手性溶剂法测定2,4-滴丙酸的^1H、^13C谱,在满足NMR准确定量所要求的分离度和信噪比的条件下,能准确测定手性化合物的对映体纯度。比较了以对映体百分含量（R％）和对映体过量（ee）表示手性农药的对映体纯度的差别,发现以对映体百分含量代替对映体过量来表示手性农药的对映体纯度更为准确。     

Development of enhanced ultrafiltration methodologies for the resolution of racemic benzoin

In the scope of achieving the separation of chiral molecules, enzyme enhanced ultrafiltration (EEUF), a new method based on polymer enhanced ultrafiltration (PEUF), utilizing apoenzymes as ligands, was developed. Benzoin was chosen as the model chiral molecule. Bovine serum albumin (BSA) and apo form of benzaldehyde lyase (BAL) (E.C. 4.1.2.38) were used as chiral ligands in PEUF and EEUF experiments, respectively. In order to bind to the target enantiomer well, the addition of ligand to the benzoin solution was followed by ultrafiltration. With the use of BSA as ligand, adaptation of PEUF for chiral target molecules and process parameter optimization was carried out; whereas, in EEUF studies the effect of ligand concentration was focused on. In PEUF experiments, although total benzoin retention values reached to 48.7% and 41.3% at pH 10, for 15% (v/v) PEG 400 and 30% (v/v) DMSO cosolvents, respectively; obtained enantiomeric excess (ee) % values were all less than 20%. In EEUF experiments, at BAL concentrations greater than 158 ppm, total benzoin retention and ee% remained constant at ca. 75% and 60%, respectively. On the other hand, at 61 ppm BAL concentration, total benzoin retention was kept at ca. 75%, but ee% decreased to ca. 30%, probably due to the nonspecific binding of benzoin to DNA and other proteins. Thus, the method developed enzyme enhanced ultrafiltration, functioned with its intended purpose effectively in chiral separation.     

Multicomponent analyses of chiral samples by use of regression analysis of UV–visible spectra of cyclodextrin guest–host complexes

We report the first combined use of analytical spectroscopy, guest–host chemistry, and multivariate regression analysis for determination of enantiometric composition of multicomponent samples of chiral analytes. Sample solutions containing multicomponent analytes of ephedrine, tryptophan, propranolol, and proline of varying enantiomeric composition with beta-cyclodextrin (BCD) or methyl-beta-cyclodextrin (Me-BCD) as chiral host molecules were investigated using ultraviolet (UV)–visible spectroscopy. The interactions of enantiomers of chiral analytes with chiral hosts resulted in the formation of transient diastereomeric inclusion complexes with varying spectral properties. Multivariate analysis using partial-least-square (PLS) regression was used to correlate subtle changes in the UV–visible spectra of the guest–host complexes with the enantiomeric composition of the calibration samples. These PLS regressions were carefully optimized and then used to predict the enantiomeric composition of multicomponent chiral analytes of validation samples. The results of these validation studies demonstrate the predictive ability of the regression models for determination of future enantiomeric composition of samples. The accuracy of the models to correctly predict the enantiomeric composition of samples, evaluated by use of the root mean square percent relative error (RMS%RE) was analyte and chiral host dependent. In general, better prediction of enantiomeric composition of samples and low RMS%RE values were obtained when Me-BCD was used as the chiral host. The analyses procedure reported here is simple, rapid, and inexpensive. In addition, this approach does not require prior separation of chiral analytes, thus reducing analysis time and eliminating the need for expensive chiral columns.     

Kinetic resolution of iodophenylethanols by Candida antarctica lipase and their application for the synthesis of chiral biphenyl compounds

The kinetic resolution of (±)-iodophenylethanols was carried out using lipase from Candida antarctica and in some cases the enantiomeric excesses were high (up to >98%). Enantiomerically enriched (S)-iodophenylethanols produced by the enzymatic resolution process were used in the synthesis of chiral biphenyl compounds by the Suzuki reaction with good yields (63–65%).     

Changes in the Enantiomeric Composition of Chiral Mixtures Upon Adsorption on a Non‐Chiral Surface

The adsorption of propylene oxide, a chiral molecule, on a Pt(111) single‐crystal surface was studied as a function of enantiomeric composition by temperature programmed desorption (TPD) and molecular beams. Two opposing trends were observed leading to variations in the enantiomeric excess (ee) of the chemisorbed layers with respect to the composition of the gas‐phase mixtures: a kinetic effect dominant during the initial uptake, with a preference toward the formation of enantiopure layers, and a steady‐state effect seen after approximately monolayer half‐saturation, at which point the preference is toward racemization. These effects may account for important phenomena such as the bias toward one chirality in biological systems and the selective crystallization of some chiral compounds, and may also be used in practical applications for chemical separations and catalysis.     

温度对蛋白和β-环糊精手性固定相拆分对映体的影响

 采用三聚氯氰为活化剂分别合成了牛血清白蛋白 (BSA)、人血清白蛋白 (HSA)和 β 环糊精手性固定相 ,研究了温度在色氨酸 ,华法令 ,酮基布洛芬和丹酰化苏氨酸手性拆分中的影响。结果表明 ,在蛋白手性固定相上对映体间的熵变对色氨酸 ,华法令和酮基布洛芬的拆分有很大的影响 ,而丹酰化苏氨酸对映体在 β 环糊精手性固定相上的拆分为典型的焓控过程 ,与蛋白柱有着不同的热力学特性。由于键合方式不同 ,色氨酸在我们合成的BSA手性固定相上的最佳分离温度为 35℃左右 ,而不是文献报道的以戊二醛为活化剂的 2 4℃。     

Synthesis and application of dehydroabietylisothiocyante as a new chiral derivatizing agent for the enantiomeric separation of chiral compounds by capillary electrophoretic

A new chiral derivatizing reagent, dehydroabietylisothiocyante (DHAIC), was synthesized and used for the enantiomeric separation of chiral compounds in capillary electrophoresis (CE). The synthetic route to obtain DHAIC is described. The separation conditions for the chiral separation of several chiral compounds, such as protein amino acids and chiral drug DOPA were optimized. Best results for the chiral separation of DHAIC derivatized amino acids and DOPA were obtained in a running buffer consisted of 50 mM borate (pH 9.5), 5 mM sodium dodecyl sulphate (SDS) and 20% acetonitrile for amino acids and 60 mM Na₂HPO₄ (pH 8.0), 17 mM SDS and 25% acetonitrile for DOPA. Under the conditions studied, chiral separation of five amino acids including Ser, Val, Ala, Thr, Cys and a chiral drug DOPA as their diastereomeric DHAIC derivatives has been achieved by micellar electrokinetic chromatography (MEKC).     

新型手性方酸衍生物的合成及催化前手性芳酮的不对称 还原反应

方酸经酯化后与手性氨基醇反应,继而与脂肪胺、硫醇等作用,首次合成了11个新型手性方酰氨基醇配体。研究了它们经原位制成手性恶唑硼烷催化前手性芳酮的不对称还原的性能,得到手性仲醇的化学产率和e.e值分别为88%～98%和42%～81%。新化合物的结构经IR,1^HNMR,MS及元素分析证实,4b的绝对构型经X射线衍射确认。     

Rapid separation of pharmaceutical enantiomers using electrokinetic chromatography with a novel chiral microemulsion

A novel oil-in-water microemulsion incorporating the chiral surfactant dodecoxycarbonylvaline (DDCV) was used to achieve the rapid enantiomeric separation of pharmaceutical drugs by electrokinetic chromatography (EKC). Incorporation of DDCV into a microemulsion resulted in an elution range more than double that provided the micellar form of the surfactant aggregate. Interestingly, for the same compounds the enantioselectivity provided by the chiral DDCV microemulsions ranged from 1.06-1.30 for the neutral and cationic drugs, which was slightly higher than that provided by chiral DDCV micelles. The use of a low surface tension oil (ethyl acetate) permitted a much lower concentration of chiral surfactant to be employed; this, together with the use of a zwitterionic buffer (ACES) resulted in a very low conductivity microemulsion that allowed a higher separation voltage to be utilized, resulting in rapid enantiomeric separations (< 8 min.). Mobility matching of the buffer cation(s) was used to improve peak shape and efficiencies. In our limited survey of the phase diagram, the optimum composition of the microemulsion buffer was 1.0% (w/v) DDCV (30 mM), 0.5% (v/v) ethyl acetate, 1.2% (v/v) 1-butanol and 50 mM ACES buffer at pH 7.     

Chiral capillary electrophoretic determination of the enantiomeric purity of tetrahydronaphthalenic derivatives, melatoninergic ligands, using highly sulfated beta-cyclodextrins

Using cyclodextrin capillary zone electrophoresis (CD-CZE), baseline separation of synthetic tetrahydronaphthalenic derivatives, potential melatoninergic compounds, was achieved. A method for the enantioresolution of these tetralins and determination of their enantiomeric purity was developed using anionic CDs (highly sulfated-CD or highly S-CD) as chiral selectors and capillaries dynamically coated with polyethylene oxide (PEO). Operational parameters such as the nature and concentration of the chiral selectors, buffer pH, organic modifiers, temperature and applied voltage were investigated. The use of charged CDs provides a driving force for our neutral compounds in the running buffer and enantiomeric resolution by inclusion of compounds in the CD cavity. The highly S-beta-CD was found to be the most effective complexing agent, allowing good enantiomeric resolution. The complete resolution of three tetralin compounds was obtained using 25 mM phosphate buffer at pH 2.5 containing 2.5% w/v of highly S-beta-CD at 25 degrees C with an applied field of 0.25 kV/cm. The apparent association constants of the inclusion complexes were calculated. This optimized method was validated in terms of linearity, sensitivity, accuracy and recovery. The enantiomeric purity for the three molecules was determined and the detection limit of enantiomer impurities is about 0.3-0.6%.     

Neutral cyclodextrins as chiral agents for enantiomeric separations of chromanes in capillary electrophoresis

Summary Six different cyclodextrins with varying cavity size and rim substitution were used as chiral agents for the enantiomeric separation of eight chromane compounds or analogues using capillary electrophoresis. It is shown that the cyclodextrin type and concentration have a large influence on the enantiomeric separation obtained for these compounds. A chiral resolution of 1.4 or better could be obtained for all the substances with either substituted heptakis(2,3,6-tri-O-methyl)-β-cyclodextrin or unsubstituted γ-cyclodextrin as the chiral selector. The influence of the γ-cyclodextrin concentration, ionic strength and pH on the chiral separations was also investigated with a multivariate screening design. The detection limit and resolution of the present method allow determinations of the investigated compounds down to a chiral impurity of less than 0.1 % (area/area).     

Highly Enantioselective Adsorption of Small Prochiral Molecules on a Chiral Intermetallic Compound

Intrinsically chiral surfaces of intermetallic compounds are shown to be novel materials for enantioselective processes. Their advantage is the significantly higher thermal and chemical stability, and therefore their extended application range for catalyzed chiral reactions compared to surfaces templated with chiral molecular modifiers or auxiliaries. On the Pd₁‐terminated PdGa(111) surface, room‐temperature adsorption of a small prochiral molecule (9‐ethynylphenanthrene) leads to exceptionally high enantiomeric excess ratios of up to 98 %. Our findings highlight the great potential of intrinsically chiral intermetallic compounds for the development of novel, enantioselective catalysts that can be operated at high temperatures and potentially also in harsh chemical environments.     

Comparing cyclodextrin derivatives as chiral selectors for enantiomeric separation in capillary electrophoresis

A total of 26 different cyclodextrin (CD) derivatives with different functional groups and degrees of substitution were tested against 35 basic pharmaceutical compounds in an effort to investigate their effectiveness as chiral selectors for enantiomeric separation in capillary electrophoresis (CE). Testing was performed under the same conditions using a low pH buffer (25 mM phosphate buffer at pH approximately 2.5). Five CD derivatives, namely, highly sulfated-beta-CD, highly sulfated-beta-CD, hydroxypropyl-beta-CD (degree of substitution approximately 1), heptakis-(2,6-O-dimethyl)-beta-CD, and heptakis(2,3,6-O-trimethyl)-beta-CD were identified to be most effective for enantiomeric separations and have a wide range of enantiomeric selectivity towards the model compounds. Over 90% of the model compounds were enantiomerically resolved with the five identified CD derivatives, at a minimum resolution of 0.5. An additional 20 compounds were also tested to demonstrate the validity of the identified CD derivatives. The five CD derivatives were recommended as the starting chiral selectors in developing enantiomeric separation methods by CE.     

Non-biaryl atropisomers in organocatalysis

A new class of 6'-hydroxy cinchona alkaloids, with a non-biaryl atropisomeric functionalisation at position 5' of the quinoline core can be prepared by an easy amination procedure. These are the first derivatives for which the principle of atropisomerism is engrafted in the classical core of the cinchona alkaloids. The aminated cinchona alkaloids are effective organocatalysts for the Michael addition of beta-keto esters to acrolein and methyl vinyl ketone, in up to 93 % ee (ee=enantiomeric excess), as well as for the asymmetric Friedel-Crafts amination of a variety of 2-naphthols, permitting the preparation of the latter in up to 98 % ee. The aminated 8-amino-2-naphthol itself is the first chiral organocatalyst based on non-biaryl atropisomerism. The two enantiomers of this chiral primary amine can be used for the direct alpha-fluorination of alpha-branched aldehydes. The fluorinated compounds can thereby be accessed in up to 90 % ee.     

Use of vancomycin chiral stationary phase for the enantiomeric resolution of basic and acidic compounds by nano-liquid chromatography

In this paper we studied the potentiality of nano-liquid chromatography (nano-LC) for the enantiomeric resolution of both basic and acidic compounds of pharmaceutical interest using a vancomycin modified silica stationary phase. Experiments were carried out in a fused silica capillary of 75 microm I.D. packed with chiral modified silica particles of 5 microm diameter, the detection, was done on-line at 195 nm. Enantiomeric resolution of alprenolol, atenolol, metoprolol, oxprenolol, pindolol, propranolol (basic compounds) and some acidic analytes, namely 2-[(5'-benzoyl-2'-hydroxy)phenyl]propionic acid (DF1738Y), 2-[(4'-benzoyloxy-2'-hydroxy)phenyl]propionic acid (DF1770Y), ketoprofen, indoprofen and suprofen was studied by nano-LC utilizing mobile phases containing methanol-acetonitrile-ammonium formate or acetate. The effect of mobile phase composition (buffer type and concentration, organic modifier type and concentration) on chiral resolution (Rs), retention factor (k) and retention time (tR) was also investigated. Good enantiomeric resolution was achieved for basic compounds utilizing the mobile phase containing 90% (MeCN-MeOH)/5% water/5% of 100 mM ammonium acetate pH 4.5. Acidic compounds such as DF1738Y and DF1770Y were better resolved at lower pH 3.5 while ketoprofen, indoprofen and suprofen exhibited the highest resolution at pH 4.5; in this case the mobile phase contained MeOH or MeCN (90%), 5% buffer and 5% of water. The nano-LC method was validated using R-(+)-propranolol as an internal standard finding good repeatability, detection limit, correlation coefficient and recovery and applied to the assay of a pharmaceutical formulation containing a racemic mixture of metoprolol.