Understanding the problems in pharmaceutical procurement with special reference to active pharmaceutical ingredients and excipients

Accreditation and Quality Assurance - Procurement of raw materials, key intermediates and excipients for the preparation of finished pharmaceutical preparation is considered to be complex process...     

Use of subambient DSC for liquid and semi solid dosage forms

Examples of the use of subambient DSC for characterizing excipients which have the melting range within ambient or subambient temperatures as well as liquid and semiliquid dosage forms are presented in the following paper.Influences of the quality, polymorphism, storage of excipients used for dosage forms and changes in the composition on the melting behaviour and quality of dosage forms were investigated.Changes of the melting behaviour of dosage forms determined with subambient DSC have shown to correlate with the quality of the dosage form, the quality of excipients used or structural changes (due to various influences) in the dosage form. DSC for use in the range of subambient and ambient temperatures represents an alternative analytical method for development and quality assurance in pharmaceutical industry for liquid and semiliquid preparations.     

Application of microemulsion electrokinetic chromatography to the analysis of a wide range of pharmaceuticals and excipients

Microemulsion electrokinetic chromatography (MEEKC) is a capillary electrophoresis (CE) technique in which solutes partition with moving oil droplets present in a microemulsion buffer. Ionised species will also separate by electrophoresis. In this paper MEEKC is shown to give highly efficient and relatively rapid separations for a wide range of pharmaceuticals, vitamins and excipients. A single set of operating conditions was used to resolve both water-soluble and insoluble compounds. The method was also used to separate both ionic and neutral compounds. The method was especially useful in the analysis of water-insoluble neutral compounds such as steroids and lecithin, which are difficult to analyse by CE. The method was found to be both quantitative and highly repeatable. The quality of the separation was found to be dependent upon the sample diluent used if large injection volumes are employed. The use of MEEKC for the determination of complex mixtures such as multi-ingredient formulations and drug-related impurities was successfully demonstrated. MEEKC offers significant advantages over many forms of CE and capillary electrochromatography (CEC) and should be considered as an extremely useful option in pharmaceutical analysis.     

An evaluation of the use of capillary electrophoresis to monitor trace drug residues following the manufacture of pharmaceuticals

Summary The novel use of capillary electrophoresis to the important and developing area of monitoring possible drug residues on pharmaceutical manufacturing equipment is reported. The CE method is applicable to a wide range of basic drugs with sensitivity as low as 25ng/ml (equivalent to 8×10^–8 M). This sensitivity is equivalent to that obtainable for HPLC for the drugs tested and is obtained by employing a combination of a wider bore capillary with low wavelength UV detection. Preliminary evaluation of the method performance shows acceptable precision, linearity, sensitivity and accuracy. Features of the method compared to HPLC include simplicity, ease of method transfer, reductions in analysis set-up time, and reduced costs of solvents and columns.     

Development and validation of new assay method for the simultaneous analysis of diltiazem, metformin, pioglitazone and rosiglitazone by RP-HPLC and its applications in pharmaceuticals and human serum

Simple, sensitive, rapid, and accurate high-performance liquid chromatographic (HPLC) method is developed and validated for the simultaneous determination of diltiazem, metformin, pioglitazone, and rosiglitazone hydrochloride in raw materials, their pharmaceutical formulations, and human serum. In HPLC, all the above drugs were chromatographed using acetonitrile-methanol-water (30:20:50, v/v, pH 2.59 ± 0.02) as the mobile phase at a flow rate of 1.0 mL/min at ambient temperature. The separation is carried out on a Hiber, 250-4.6 RP-18 column, equipped with a UV-vis detector at 230 nm. All the antidiabetic drugs eluted at different retention time and each showed a good resolution from diltiazem. The method is successfully applied to pharmaceutical formulations because no chromatographic interferences from the tablet excipients are found. The method is found to be linear, accurate, and precise with apposite detection and quantification limit. Suitability of the method for the quantitative determination of the drugs is proven by validation in accordance with the requirements laid down by International Conference on Harmonization (ICH) guidelines. The validation results, together with statistical treatment of the data, demonstrated the reliability of this method.     

Determination of ciclopirox olamine in pharmaceutical products by capillary electrophoresis with capacitively coupled contactless conductivity detection

This paper describes the determination of ciclopirox olamine in pharmaceutical formulations using capillary electrophoresis with capacitively coupled contactless conductivity detection. In an alkaline medium, ciclopirox olamine is converted into an anionic species and its detection is possible in capillary electrophoresis with capacitively coupled contactless conductivity detection without an electroosmotic flow modifier, because it is a low-mobility species. A linear working range from 2.64 to 264 μg/mL in sodium hydroxide electrolyte as well as low detection limit (0.39 μg/mL) and a good repeatability (RSD = 3.4% for 264 μg/mL ciclopirox solution (n = 10)) were achieved. It was also possible to determine olamine in its cationic form when acetic acid was used as the electrolyte solution. The results obtained include a linear range from 26.4 to 184.8 μg/mL and a detection limit of 2.6 μg/mL olamine. The proposed methods were applied to the analysis of commercial pharmaceutical products and the results were compared with the values indicated by the manufacturer as well as those obtained using a titrimetric method recommended by American Pharmacopoeia.     

Application of multidimensional scaling to preformulation sciences: a discriminatory tool to group microcrystalline celluloses

Pre-formulation studies constitute the first step of any pharmaceutical product development and manufacture. Establishment of a comprehensive library of critical physical, chemical, biological and mechanical properties of all materials used for a formulation can be costly, tedious and time consuming, despite its importance in quality manufacturing management. This study seeks to demonstrate the pharmaceutical application of multidimensional scaling (MDS) by incorporating it as a pre-formulation tool for grouping an expanded range of microcrystalline celluloses (MCC). MDS presents the various MCC grades in two-dimensional space based on their torque rheological properties; thus conferring an extra dimension to the pre-formulation tool to facilitate the visualization of the relative positions of each MCC grade. Through this work, the utility of MDS for expediting pre-formulation studies, in particular, grouping of excipients that are available in different brands and grades can be amply exemplified.     

The advantages of evaporative light scattering detection in pharmaceutical analysis by high performance liquid chromatography and supercritical fluid chromatography

The evaporative light scattering detector (ELSD) has been used in pharmaceutical analysis by liquid and supercritical fluid chromatography. An ELSD equipped with interchangeable interfaces enables the use of various eluents (UV- or non-UV-absorbing) in isocratic or gradient mode. Analyses were performed on several non-UV-absorbing excipients and active substances. The narrow spread of the response factors of the various compounds investigated has indicated that the detector is suitable for direct raw quantitation of unknown samples in stability studies.     

Development of a multiresidue method for analyzing herbicide and fungicide residues in bovine milk based on solid-phase extraction and liquid chromatography-tandem mass spectrometry

The adverse effect of reactive chemical residues on the quality of drug products has necessitated the determination of low-molecular-weight aldehydes in pharmaceutical excipients. An analytical methodology for the detection of trace amounts of C1-C8 aliphatic aldehydes and benzaldehyde in excipients is described. The proposed procedure is based on the derivatization of aldehydes in aqueous solution with O-2,3,4,5,6-(pentafluorobenzyl) hydroxylamine hydrochloride (PFBHA), followed by static headspace gas chromatographic (SHS-GC) analysis of PFBHA aldehyde oximes with negative chemical ionization (NCI) MS detection. The method developed was demonstrated to be simple, selective, sensitive, and was successfully applied to the screening of aldehydes at sub-microg/g levels in over 30 typical excipients. The most abundant aldehydes found in the samples were formaldehyde and acetaldehyde, for which a rapid and reliable routine quantification method by readily available SHS-GC instrumentation coupled with flame-ionization detection was also developed and validated.     

Application of chemometrically processed thermogravimetric data for identification of baclofen-excipient interactions

Studies are constantly being conducted on the elaboration of efficient methods to confirm the compatibility of active pharmaceutical ingredients (APIs) and excipients, since medicinal products, apart from their APIs, also contain numerous excipients that not only have important functions in pharmaceutical preparations but can also initiate or participate in interactions with drug substances, which eventually lead to a decline in drug quality. With this in mind, research was undertaken to evaluate two of the most often applied pattern recognition methods, hierarchical cluster analysis (HCA) and principal component analysis (PCA), as supporting techniques in the identification of potential physicochemical interactions that may occur during the preformulation of solid dosage forms. The investigation performed with the use of baclofen and selected excipients has shown that with thermogravimetric analysis, HCA and PCA fulfill their role as supporting techniques in the interpretation of the data obtained. Based on these methods, it is possible to detect incompatibilities between baclofen and excipients, and the data obtained concur strongly with the results of differential scanning calorimetry and IR spectrometry analyses.     

Analysis of organic volatile impurities in pharmaceutical excipients by static headspace capillary gas chromatography

A systematic approach for the identification and quantification of organic volatile impurities (OVIs) in pharmaceutical excipients is described. Analytical procedures utilizing static headspace capillary gas chromatography coupled with flame-ionization and MS detection techniques were developed for the analysis of toxic ICH class 1 solvents and US Pharmacopeia OVIs at sub-ppm levels, and commonly used organic solvents in a wide range of concentrations. Chromatographic conditions and headspace parameters for the methods were optimized for separation, sensitivity, and speed. The proposed methodologies were demonstrated to be selective, accurate, and reproducible, and were successfully applied to the rapid screening of OVIs in typical excipients.     

Molecular detection of Burkholderia cepacia in toiletry, cosmetic, and pharmaceutical raw materials and finished products

A polymerase chain reaction (PCR) assay was developed and compared with standard methods for rapid detection of Burkholderia cepacia, a major industrial contaminant, in cosmetic and pharmaceutical raw materials and finished products. Artificially contaminated samples were incubated for 24 h in trypticase soy broth containing 4% Tween 20 and 0.5% soy lecithin. DNA was extracted from each sample using a proteinase K-tris-EDTA-Tween 20 treatment at 35 degrees C. The extracted DNA was added to Ready-To-Go PCR beads and specific DNA primers for B. cepacia. The B. cepacia DNA primers coded for a 209-base pair (bp) fragment of the 16S rRNA ribosomal gene. No DNA amplification was observed in samples that were not spiked with B. cepacia. However, all contaminated samples showed the specific 209-bp fragment for B. cepacia. There was a 100% correlation between standard methods and the PCR assay. Standard microbiological methods required 5-6 days for isolation and identification of spiked microorganisms, whereas PCR detection and identification was completed in 27 h. PCR detection of B. cepacia allows for rapid quality evaluation of cosmetic and pharmaceutical raw materials and finished products.     

Evaluation of the moisture sorption behaviour of several excipients by BET, GAB and microcalorimetric approaches

Moisture content of solid-state pharmaceutical products is one of the main factors that affect drug stability, therefore suitable sorption studies need to be performed to assure drug quality throughout their shelf life. The Brunauer-Emmett-Teller (BET) and the Guggenheim-Anderson-de Boer (GAB) models are usually used for this purpose. Using gravimetrically obtained data, both methods were applied in the present work to evaluate the sorption characteristics of several excipients. Microcalorimetric analysis was also performed in order to evaluate the interaction between water and the substances. The results of these experiments show excellent agreement between data and the BET model up to 55% RH and the GAB model over the entire humidity range, confirmed by high values of the statistical determination coefficients. Furthermore, microcalorimetric measurements suggested that the hygroscopicity of solid materials could be estimated approximately using this approach.     

Thermal compatibility between hydroquinone and retinoic acid in pharmaceutical formulations

Thermogravimetry (TG) and differential scanning calorimetry (DSC) are used in pharmaceutical studies for characterization of drugs, purity, compatibility of formulations, identification of polymorphism, evaluation of stability, and thermal decomposition of drugs and pharmaceutical formulations. Hydroquinone (HQ) and products containing HQ have been widely used as depigmentation agents for lightening the skin. Retinoids are compounds that have the basic core structure of vitamin A and its oxidized metabolites, or synthetic compounds that share similar mechanisms of action as naturally occurring retinoids. Depigmentants and excipients were analyzed by TG and DSC. The dynamic thermogravimetric curves were obtained on a SHIMADZU thermobalance, model DTG-60, using an alumina crucible, at the heating rate of 10 °C min^?1, in the temperature range of 25–900 °C, under an atmosphere of nitrogen at 50 mL min^?1. The sample's mass was 10 ± 0.05 mg. The DSC curves were obtained using Shimadzu calorimeter, model DSC-60, using aluminum crucible, at the heating rate of 10 °C min^?1, in the temperature range of 25–400 °C. The thermogravimetric and calorimetric curves were analyzed using TASYS software SHIMADZU. In this study were found the interaction between retinoic acid (RA) and the following excipients: cetyl alcohol(CA), cetostearyl alcohol (CTA), glycerin(GLY), and dipropylene glycol (DPG), and that between HQ and the excipient, DPG. Therefore, additional studies are necessary to evaluate final formulations. Thermal analysis is an effective and reliable technique that can be used in the control of raw materials and pharmaceutical products, and for evaluating their employment potential in the development and characterization of products.     

Applications of capillary electrophoresis with electrochemical detection in pharmaceutical and biomedical analyses

As a high efficiency separation technique, capillary electrophoresis has been widely used in various fields of analytical science. This review discusses the applications of electrochemical detection systems combined with capillary electrophoresis in pharmaceutical and biomedical analysis. These detection methods mainly involve amperometric detection but also include conductivity detection and potentiometric detection. Its applications in the field are divided into six parts, including catechol compounds, thiols, amino acids and peptides, carbohydrates, general pharmaceuticals, and other related compounds. A relatively detailed discussion is described for each compound under the current studied. On this basis, we have suggested several conceivable directions for capillary electrophoresis with electrochemical detection in the future.     

Variation in the composition of the essential oils, phenolic compounds and mineral elements of Hypericum perforatum L. growing in Estonia

A comprehensive investigation of the chemical composition of the aerial parts of Hypericum perforatum L. collected in three habitations in Estonia was carried out. An analysis by gas chromatography-mass spectrometry and gas chromatography-flame ionisation detection established the main components of the essential oils. The phenolic compounds both in ethanol and water extracts of the plant were analysed using liquid chromatography-mass spectrometry (LC-MS) and capillary zone electrophoresis. In addition to the earlier published polyphenols, several new phenolic acids and flavonoids, such as quercetin hexoside malonates and an A-type catechin-epicatechin trimer were identified in this Hypericum for the first time. The contents of the pharmaceutically important antidepressants hyperforin and hypericin were also estimated by LC-MS and compared with the data in the literature. The composition of the mineral elements was determined by atomic absorption spectroscopy. The results of the study demonstrate a rather high variability in the content of different substance groups in H. perforatum L. and, hence, the need for a survey of the raw material in the course of selection of raw materials for pharmaceutical preparations.     

Quality analytics of internet pharmaceuticals

Trading pharmaceutical products through the Internet poses several challenges related to legal responsibilities, good distribution practices, information content and patient use, financial implications, but also regarding product quality. One of the major concerns is the well-known phenomenon of counterfeited and/or substandard drugs commercialized through rogue Internet sites. Therefore, controlling and assuring the quality of those products has become an important and challenging task for the authorities. This review gives an overview of the different quality attributes that can be evaluated to have a complete understanding of the quality of the finished pharmaceutical product traded through the Internet, as well as the current analytical techniques that serve this objective. Aspects considered are labelling and packaging, physicochemical quality attributes, identification and assay of active substances and/or excipients, impurity profiling, biopharmaceutical testing and data interpretation.     

Chemometric experimental design based optimization techniques in capillary electrophoresis: a critical review of modern applications

A critical review of recent developments in the use of chemometric experimental design based optimization techniques in capillary electrophoresis applications is presented. Current advances have led to enhanced separation capabilities of a wide range of analytes in such areas as biological, environmental, food technology, pharmaceutical, and medical analysis. Significant developments in design, detection methodology and applications from the last 5 years (2002–2007) are reported. Furthermore, future perspectives in the use of chemometric methodology in capillary electrophoresis are considered.     

Compatibility of sildenafil citrate and pharmaceutical excipients by thermal analysis and LC–UV

The evaluation of sildenafil citrate (SC), the best-selling drug for treatment of impotence, for compatibility with various excipients was investigated using thermal and isothermal stress testing. Differential scanning calorimetry (DSC), hot-stage microscopy (HSM) and liquid chromatography (LC) with ultraviolet detection were successfully employed to investigate the compatibility between SC and various excipients commonly used in solid form in the pharmaceutical industry. The studies were performed using 1:1 (m/m) drug/excipient physical mixtures and samples were stored under accelerated stability conditions (40 °C at 75% relative humidity). All excipients tested (such as colloidal silicon dioxide, croscarmellose sodium, lactose, mannitol and sucrose) showed potential incompatibilities by DSC and LC analysis after accelerated stability testing. However, some incompatibilities were not detected by the DSC method and were observed only when LC analysis was performed. HSM was able to differentiate active pharmaceutical ingredient degradation from solubilisation, supporting the interpretation of DSC in excipients where thermal events either overlapped or disappeared. The combination of both the analytical techniques (DSC and LC) and use of a stability chamber is extremely helpful in detecting incompatibilities and providing more robust and accurate approaches for pre-formulation studies.