Studies on the thermal decomposition of the silver group of alkali metal nitritocobaltates(III)

The thermal decomposition of nitritocobaltate(III) of the silver group of general formula M₂Ag[Co(NO₂)₆] (where M = K⁺, NH⁺₄, Rb⁺ or Cs⁺) has been investigated. Based on the thermal curves of the investigated compounds and chemical and diffractometric analysis, the mechanism of thermal decomposition has been determined. The results obtained indicate that the decomposition proceeds in three stages. As a result of decomposition in the first stage (300°C), nitrates of alkali metals, metallic silver and Co₃O₄ are formed. In the second stage (500°C), a partial decomposition of nitrates to alkali metal oxides occurs, and in the third stage the products are alkali metal oxides, silver and Co₃O₄. This paper also presents the dependence of the decomposition temperature of nitritocobaltates(III) of the silver group on the ionic radius of the outer-sphere cation.     

Effects of alkali metal ions on the thermal decomposition of ammonium heptamolybdate tetrahydrate

The thermal decomposition of pure ammonium heptamolybdate tetrahydrate (AHMT), and doped with Li⁺, Na⁺ and K⁺ ions was investigated using thermogravimetry, differential thermal analysis, infrared and X-ray diffraction techniques. Results obtained revealed that the decomposition of AHMT proceeded in three decomposition stages in which both NH₃ and H₂O were released in all stages. The presence of 0.5 mol % alkali metal ions enhances the formation of the intermediateb (NH₄)₂MO₇O₂₂·2H₂O while the decomposition of this intermediate into MoO₃ is slightly affected in the presence of all dopant concentrations used. The infrared absorption spectra of the thermal products of AHMT treated with 10 mol% alkali metal ions (AMI) at 350°C indicated a reduction of some Mo⁶⁺ ions. By heating of AHMT above 500°C in presence of 5 or 10 mol % of AMI, a solid-solid interaction between alkali metal oxides and MoO₃ giving rise to well crystallized alkali metal molybdates. finally the activation energies accompanied various decomposition stages were calculated.     

Thermal stability and decomposition of nafion® membranes with different cations

The thermal decomposition of Nafion has been studied by means of high-resolution and constant heating rate thermogravimetry (TG), under nitrogen and synthetic air atmospheres. Nafion membranes have been studied in acid and salt (alkali chlorides) forms. The TG curves of Nafion with alkali countercations show similar profiles, whichever the atmosphere employed. The kinetics of thermal decomposition of the Nafion-Cs⁺ has also been studied. The method employed to calculate the kinetic parameters and to estimate the polymer lifetime from the data was based on Kissinger's method. This revised version was published online in August 2006 with corrections to the Cover Date.     

Reactions of the trimethylsilyl ion with 1,2-cyclopentanediol isomers in the collision region of a triple quadrupole instrument

Ion-molecule reactions with the trimethylsilyl ion were used to distinguish between cis- and trans-1,2-cyclopentanediol isomers. The ion kinetic energy of [Si(CH₃)₃]⁺ was varied from 0 eV to 15 eV (center of mass frame of reference). At low ion kinetic energies (<4 eV), there are significant differences in the relative stabilities and decomposition behavior of the adduct ions [M + Si(CH₃)₃]⁺. The cis-1,2-cyclopentanediol isomer favors decomposition of [M + Si(CH₃)₃]⁺ to yield the hydrated trimethylsilyl ion [Si(CH₃)₃OH₂]⁺ at m/z 91. For the trans isomer, the formation of the hydrated trimethylsilyl ion is an endothermic process with a definite threshold ion kinetic energy.     

The [M?OH]+ ions of m- and p-ethylnitrobenzene: A common structure?

The structures of the [M? OH]⁺ ions of m- and pethylnitrobenzene have been compared by measurements of metastable ion spectra, collisional activation spectra, kinetic energy releases and critical energies for the formation of these ions and their subsequent decomposition. Normalized rates of fragmentation of metastable molecular ions and metastable [M? OH]⁺ ions have been compared for ion lifetimes up to 30 μs. The energy measurements fail to distinguish between the structures of the [M? OH]⁺ ions, but the normalized fragmentation rates and the collisional activation spectra show their structures to be different.     

Thermal characterization of Flemion® membranes substituted by alkali metal cations

The thermal behavior of perfluorosulfonated membranes of three equivalent mass (EW=910, 1000 and 1100 g eq⁻¹) has been studied for membranes in acid form and in the alkali metal countercations substituted samples. The water contents of the membranes decrease progressively with increasing EW and the countercations charge density. The monovalent cations substitutions increase the membranes thermal stability. DSC curves show a single endothermic peak around 120°C that give low peak temperature for low EW and high peak temperature for large cations size. The membrane mechanical properties changed for different EW and temperatures of membranes. Stress-strain analysis showed that K⁺ substituted membranes at both temperatures present a highest YM compared to the other alkali cation substitutions. The thermal properties of perfluorosulfonated membranes depend on the water contents, cation size, temperature and also on EW value.     

Alkali and Alkaline Earth Metal Ions Complexes with a Partial Peptide of the Selectivity Filter in K+ Channels Studied by a Cold Ion Trap Infrared Spectroscopy

The infrared (IR) spectra of alkali and alkaline earth metal ion complexes with the Ac-Tyr-NHMe (GYG) peptide have been measured by laser photodissociation in a cold ion trap coupled with an electrospray mass spectrometer. The GYG peptide corresponds to a portion of the ion selectivity filter in the KcsA K⁺ channel that allows K⁺ to pass, but blocks Na⁺ even though it has a smaller ionic radius than K⁺. This current study extends a previous investigation on Na⁺ and K⁺ to the entire set of alkali metaI ions and alkaline earth dications. IR-IR hole-burning (IR² dip) spectroscopy has established the coexistence of several conformers of the GYG-metal ion complexes. The structures of the conformers were assigned by comparison between the isomer-selected IR spectra and theoretical IR spectra obtained from quantum chemical calculations. It was found that the structure of the dominant conformer correlates with the ability of the ion to permeate through the K⁺ channel.     

Effect of alkali metal cationization on the collision-induced decomposition of alkyl per-O-acetyl-2-deoxy-2-halo-α-O-mannopyranosides

The effect of alkali metal cationization on the collision-induced decomposition of alkyl per-O-acetyl-2-deoxy-2-bromo-and-iodo-α-O-mannopyranosides was studied. The bromo sugars gave fairly abundant MH⁺, whereas for the iodo sugars the MH⁺ ions were insignificant. However, both the bromo and the iodo derivatives gave abundant M + alkali metal ion complexes. In contrast to the behaviour of the MH⁺ ion, the [M + Li]⁺, [M + Na]⁺ and [M + K]⁺ ions of these compounds do not decompose by loss of the C(1) substituent. Elimination of AcOH is the preferred fragmentation pathway of [M + Cat]⁺. Elimination of HX occurs only after loss of AcOH and CH₂CO from MH⁺, whereas [M + Cat]⁺ directly loses HX. The elimination of HX is more pronounced from [M + Na]⁺ and [M + K]⁺ than from [M + Li]⁺. Loss of AcOLi is an additional fragmentation route observed in the case of the decomposition of [M + Li]⁺ ion.     

Synthesis,alkali metal picrate extraction,and alkali metal cation binding selectivities of some new cage‐annulated polyoxamacrocyclic crown ethers

Five new cage‐annulated crown ethers, i.e., 4a, 4b, 6b, 11a, and 11b, have been synthesized and their respective alkali metal picrate extraction profiles along with that of a previously synthesized host molecule, 6a, have been obtained. These results are compared with the corresponding results obtained for electrospray ionization mass spectrometric (ESI‐MS) measurements of relative binding selectivities displayed by the same hosts toward a series of alkali metal chlorides. Among the crown‐5 hosts studied, 6a displays enhanced avidity toward complexation with K⁺ picrate in liquid‐liquid extraction experiments. Among the three crown‐6 hosts, 4b proved to be the best alkali metal picrate extractant and displayed significant levels of avidity toward complexation with the larger alkali metal cations (i.e., K⁺, Rb⁺, and Cs⁺). The trends in the picrate extraction and the ESI‐MS results obtained herein show several notable similarities and some differences. The similarities generally stem from size‐selective binding properties that are intrinsic to the different cavity sizes of the cage‐annulated macrocycles, whereas the differences reflect the important influence of solvation effects on the binding properties of the macrocycles.     

Reproducibility and extent of fragmentation of laser-desorbed ions : Relation to mechanism of desorption

The reproducibility of decomposition patterns of laser desorbed propyltriphenyl-phosphonium ions and (M + Na)⁺ ions of sucrose is evaluated. These compounds were chosen because they desorb by two different mechanisms commonly ascribed to “thermal” desorption. The phosphonium ions desorb directly whereas sucrose requires cationization with an alkali metal ion. Samples were either pipetted or electrosprayed onto both “smooth” and “rough” copper probe tips. The precision of two ratios of ion abundances are slightly worse for laser desorption of the phosphonium ions than for ions produced by electron ionization of toluene and 2,5-dibromotoluene. Little improvement was obtained by turning to electrospray as a means of depositing the sample. Worse precision was found for ion abundance ratios obtained from the laser desorption of (M + Na)⁺ of sucrose which hadbeen pipetted onto the probe. The precision was improved by using the electrospray deposition method. Fragmentation of the phosphonium ions was greater if desorption was from a “rough” probe tip whereas less decomposition of the (M + Na)⁺ of sucrose occurred with desorption from a “rough” tip. The trends in precision and extent of fragmentation are rationalized in terms of mechanisms of ion desorption. Chemical ionization of laser-desorbed neutral species was found to be impossible under the experimental conditions used.     

ACE applied to the quantitative characterization of benzo‐18‐crown‐6‐ether binding with alkali metal ions in a methanol–water solvent system

ACE was applied to the quantitative evaluation of noncovalent binding interactions between benzo‐18‐crown‐6‐ether (B18C6) and several alkali metal ions, Li⁺, Na⁺, K⁺, Rb⁺ and Cs⁺, in a mixed binary solvent system, methanol–water (50/50 v/v). The apparent binding (stability) constants (K_b) of B18C6–alkali metal ion complexes in the hydro‐organic medium above were determined from the dependence of the effective electrophoretic mobility of B18C6 on the concentration of alkali metal ions in the BGE using a nonlinear regression analysis. Before regression analysis, the mobilities measured by ACE at ambient temperature and variable ionic strength of the BGE were corrected by a new procedure to the reference temperature, 25°C, and the constant ionic strength, 10 mM . In the 50% v/v methanol–water solvent system, like in pure methanol, B18C6 formed the strongest complex with potassium ion (log K_b=2.89±0.17), the weakest complex with cesium ion (log K_b=2.04±0.20), and no complexation was observed between B18C6 and the lithium ion. In the mixed methanol–water solvent system, the binding constants of the complexes above were found to be about two orders lower than in methanol and about one order higher than in water.     

Determination of orders of relative alkali metal ion affinities of crown ethers and acyclic analogs by the kinetic method

Ladders of relative alkali ion affinities of crown ethers and acyclic analogs were constructed by using the kinetic method. The adducts consisting of two different ethers bound by an alkali metal ion, (M₁ + Cat + M₂)⁺, were formed by using fast atom bombardment ionization to desorb the crown ethers and alkali metal ions, then collisionally activated to induce dissociation to (M₁ + Cat)⁺ and (M₂ + Cat)⁺ ions. Based on the relative abundances of the cationized ethers formed, orders of relative alkali ion affinities were assigned. The crown ethers showed higher affinities for specific sizes of metal ions, and this was attributed in part to the optimal spatial fit concept. Size selectivities were more pronounced for the smaller alkali metal ions such as Li⁺, Na⁺, and K⁺ than the larger ions such as Cs⁺ and Rb⁺. In general, the cyclic ethers exhibited greater alkali metal ion affinities than the corresponding acyclic analogs, although these effects were less dramatic as the size of the alkali metal ion increased.     

Influence of heating rate on kinetic quantities of solid phase thermal decomposition

Thermogravimetric analyses of thermal decomposition (pyrolysis, thermal dissociation and combustion) of 9 different samples were carried out in dynamic conditions at different heating rates. The kinetic parameters (E, A and k_m) of thermal decomposition were determined and interrelations between the parameters and heating rate q were analyzed. There were also relations between Arrhenius and Eyring equations analyzed for thermal decomposition of solid phase. It was concluded that Eyring theory is an element, which interconnects used thermokinetic equations containing Arrhenius law and suggests considering kinetic quantities in way relative to 3 kinetic constants (E, A and k_m). Analysis of quantities other than km (i.e. E, A, Δ⁺H, Δ⁺S) in relation to heating rate is an incomplete method and does not lead to unambiguous conclusions. It was ascertained that in ideal case, assuming constant values of kinetic parameters (E and A) towards heating rate and satisfying both Kissinger equations, reaction rate constant k_m should take on values intermediate between constants (k_m)₁ and (k_m)₂ determined from these equations. Whereas behavior of parameters E and A towards q were not subjected to any rule, then plotting relation k_m vs. q in the background of (k_m)₁ and (k_m)₂ made possible classification of differences between thermal decomposition processes taking place in oxidizing and oxygen-free atmosphere.     

The effects of alkali metal(Na+,K+) on the exchange degree of Hβ zeolite and the catalytic properties of the alkalized zeolites

The effects of alkali metals (Na+,K+) on the exchange degree of Hβ zeolite under different conditions and the conversion of α(or β)-methylnaphthalene over the alkalized zeolites were studied. The results showed that the H+ of Hβ zeolite is totally replaced by the Na+ of NaCl solution, while partially exchanged by the K+ of KC1 solution, there is an exchange equilibrium between the H+ and K+ for Hβ zeolite (Si/Al=17.23) and the value of equilibrium is 88.39. The exchange degree also increases with increasing the Si/Al of the samples. It was suggested that these resluts are attributed to the electrostatic field in the pore of Hβ zeolite and the nature of zeolite and the properties of alkali metal. The isomerization of α(or β)-methylnaphthalene is the main reaction over the samples and it is more favour on the proper acid-base sites of KHβ zeolite.     

Ion formation in fast atom bombardment mass spectrometry: a divided probe investigation of gas-phase reactions

Some ion-formation processes during fast atom bombardment (FAB) are discussed, especially the possibility of reactions in the gas phase. Divided (two halves) FAB probe tips were used for introducing two different samples into the source at the same time. Our results showed [M + A]⁺ ions (where M = crown ethers and A = alkali metal ions), can be produced, at least in part, in the gas phase when crown ethers and sources of alkali metal ion are placed on two halves of the FAB probe tip. The extent of this ion formation depends on the volatility of the crown ether and on steric factors. Cluster ions such as (M + LiCl)Li⁺, (2M + LiCl)Li⁺, [2M + K]⁺ and [2M + Na]⁺ are also observed to form in the gas phase. Unimolecular decompositions contribute to some ions detected in FAB. When the alkali ion salt and the crown ether are mixed together the probability of [M + A]⁺ ion formation increases significantly, regardless of the volatility of the crown ether.     

Thermal degradation of natural and treated hemp hurds under air and nitrogen atmosphere

Sustainability goals are essential driving principles for the development of innovative materials in the construction industry. Natural fibers represent an attractive alternative as reinforcing material due to good mechanical properties and sustainability prerequisites. The study has been focused on the comparative investigation of chemical and physical treatments of hemp hurds and their influence on the thermal behavior of main hemp constituents in air and nitrogen atmosphere. Thermal decomposition of hemp hurds involves several parallel reactions related to heat and mass transfer processes. A comparison of DSC and TG/DTG results of hemp hurds samples before and after treatments demonstrates a better thermal stability for treated samples. It is caused by changes in chemical composition due to a partial removal of non-cellulosic components from hemp hurds structure, an increase in cellulose content and decrease in its degree of polymerization. The results show different thermal behavior of the hurds samples heated under nitrogen and air atmosphere. Based on DTG records, several-stage process of mass loss has been found for the samples under air, whereas only two-stage process under nitrogen.

     

An Ab Initio MO Study on Orbital Interaction and Charge Distribution in Alkali Metal Aqueous Solution: Li+, Na+, and K+

The analysis of the orbital interaction between an alkali metal ion and the surrounding solvent molecules is performed for aqueous solutions of Li⁺, Na⁺, and K⁺, by means of the ab initio MO method with the aid of the quantum mechanical (QM)/molecular mechanics (MM) method. A total of 171 water molecules are included for each system. The effect of Li⁺ orbitals reaches as far as 6 Å 7 Å for Na⁺; and 9 Å for K⁺. This effect is caused by the orbital interactions between the valence orbitals of an alkali metal ion and of the surrounding water molecules. The electrostatic interaction and the orbital interaction must not be neglected. The difference in the effect between the alkali metal ions originates from the difference in the valence orbital extensions of the alkali metal ions.     

Alkali‐Metal‐Ion‐Functionalized Graphene Oxide as a Superior Anode Material for Sodium‐Ion Batteries

Although graphene oxide (GO) has large interlayer spacing, it is still inappropriate to use it as an anode for sodium‐ion batteries (SIBs) because of the existence of H‐bonding between the layers and ultralow electrical conductivity which impedes the Na⁺ and e^? transformation. To solve these issues, chemical, thermal, and electrochemical procedures are traditionally employed to reduce GO nanosheets. However, these strategies are still unscalable, consume high amounts of energy, and are expensive for practical application. Here, for the first time, we describe the superior Na storage of unreduced GO by a simple and scalable alkali‐metal‐ion (Li⁺, Na⁺, K⁺)‐functionalized process. The various alkali metals ions, connecting with the oxygen on GO, have played different effects on morphology, porosity, degree of disorder, and electrical conductivity, which are crucial for Na‐storage capabilities. Electrochemical tests demonstrated that sodium‐ion‐functionalized GO (GNa) has shown outstanding Na‐storage performance in terms of excellent rate capability and long‐term cycle life (110 mAh g^?1 after 600 cycles at 1 A g^?1) owing to its high BET area, appropriate mesopore, high degree of disorder, and improved electrical conductivity. Theoretical calculations were performed using the generalized gradient approximation (GGA) to further study the Na‐storage capabilities of functionalized GO. These calculations have indicated that the Na?O bond has the lowest binding energy, which is beneficial to insertion/extraction of the sodium ion, hence the GNa has shown the best Na‐storage properties among all comparatives functionalized by other alkali metal ions.     

Collisional activation spectra of [M + Li]+, [M + Na]+ and [M + K]+ ions formed by field desorption of some monosaccharides

The collisional activation spectra of monosaccharide ions formed by [Li]⁺, [Na]⁺ and [K]⁺ ion attachment under field desorption conditions are reported. It is shown that the elimination of the alkali ions is determined by the alkali ion affinities of the molecules (M) and competes with a fragmentation of M which is almost independent of the alkali ion attached. Correspondingly the alkali ion is predominantly retained in the fragment ions. The usefulness of this method for the differentiation of underivatized isomers is demonstrated.     

Mechanism of formation of alkali metal cation adducts in plasma desorption mass spectrometry of biomolecules

Experimental data on correlations between the directions of the incident primary ion and the ejected protonated [M + H]⁺ and alkali metal adduct [M + Cs]⁺ molecules for three peptide samples with an incident beam of 72.3 MeV ¹²⁷I¹⁴⁺ ions are reported. Measurements were carried out in a linear time-of-flight mass spectrometer by monitoring the secondary ion yield as a function of electrostatic deflection in a direction perpendicular to the spectrometer axis. No difference was observed in the direction in which [M + H]⁺ and [M + Cs]⁺ ionic species are preferentially desorbed. The results obtained suggest that alkali metal cation attachment to biomolecules in plasma desorption mass spectrometry is realized in a close spatial location and time interval with protonation. Formation of ion-molecule complexes occurs at an early stage of the desorption event and precedes their ejection into the gas phase.