A Fe<Superscript>3+</Superscript>/Hg<Superscript>2+</Superscript>-Selective Anthracene-Based Fluorescent PET Sensor with Tridentate Ionophore of Amide/β-Amino Alcohol

A new anthracene-based fluorescent PET sensor 1 with a tridentate ionophore of amide/β-amino alcohol displays very good selectivity and sensitivity for Fe³⁺ (K _a = 1.6 × 10³ M⁻¹) and Hg²⁺ (K _a = 2.1 × 10³ M⁻¹) in CH₃CN–H₂O (3:7, v/v) with detection limit of 1 μM. More fluorescence enhancement was observed when 1 selectively detected Fe³⁺ or Hg²⁺ in CH₃CN and its detection limit was up to 0.03 μM.     

Application of Functionalized ZnSe Nanoparticles to Determinate Heavy Metal Ions

In this paper, ZnSe nanoparticles, which were modified with mercaptoacetic acid (MAA), worked as novel fluorescence sensors for the quantitative determination of copper(II) and nickel(II). Under the optimal conditions, the fluorescence intensities of functionalized ZnSe nanoparticles were quenched by the addtion of copper(II) or nickel(II) ions, there were linear relationships between the relative fluorescence intensity (logF₀/F) and the concentration in the range of 140–2,000 μg/L for copper(II) (R = 0.9973) and 30–1,000 μg/L for nickel(II) (R = 0.9992), the limits of detection were 50 μg/L and 5 μg/L, respectively.     

Synthesis of Functionalized ZnSe Nanoparticles and Their Applications in the Determination of Bovine Serum Albumin

Luminescent quantum dots (QDs)-semiconductor nanocrystals were promising alternative to organic dyes for fluorescence-based applications. In this paper, we developed procedures to use mercaptoacetic acid (MAA) to modify ZnSe nanoparticles and made the nanoparticles to be soluble for the quantitative and selective determination of bovine serum albumin (BSA). Maximum fluorescence intensity was produced at pH 7.0, with excitation and emission wavelengths at 242 and 348 nm, respectively. Under optimal conditions, the straight line equation: ^△ F = 0.38 + 0.34 C (μg/ml) was found between the relative fluorescence intensity and the concentration of BSA in the range of 9.6–124.8 μg/ml, and the limit of detection was 2 μg/ml.     

Interaction of Thyroxine with 7 Hydroxycoumarin: A Fluorescence Quenching Study

The interaction between thyroxine hormone and 7 hydroxycoumarin (7HC) was investigated using fluorescence quenching method. The experimental results showed that thyroxine could quench the fluorescence of 7HC by forming the 7HC–thyroxine complex with static quenching. The apparent binding constants (K) between 7HC and thyroxine were determined to be 1.51 × 10⁴ (297 K) and 9.06 × 10³ (310 K). The binding sites (n) 0.98 ± 0.1. The thermodynamic parameters showed that the interaction between 7HC and thyroxine was driven mainly by hydrogen bonding interactions and van der Waals force. Calibration for thyroxine, based on quenching titration data, was linear in the concentration range 2.0 × 10⁻⁸ to 3.0 × 10⁻⁷ mol/l. The relative standard deviation was 2.58% for 2.0 × 10⁻⁷ mol/l thyroxine (n = 4) and the 3σ limit of detection was 3.42 × 10⁻⁸ mol/l in cationic surfactant CTAB medium.     

Determination of Enoxacin Using Tb Composite Nanoparticles Sensitized Luminescence Method

In our study, terbium-acetylacetone (Tb-acac) composite nanoparticles have been prepared under vigorous ultrasonic irradiation. The nanoparticles are water soluble, stable and have extremely narrow emission bands and high internal quantum efficiencies. They were used as fluorescence probes in the determination of enoxacin (Enox) based on the fluorescence enhancement of nanoparticles through fluorescence resonance energy transfer (FRET). The influence of buffer solution on the fluorescence intensity was investigated. Under the optimum conditions, the fluorescence intensity of the Tb-acac-Enox system is linearly proportional to the Enox concentration in the Enox concentration range of 2 × 10⁻⁷–1 × 10⁻⁴ M. The correlation coefficient for the calibration curve was 0.9976. The limit of detection as defined by IUPAC, C _LOD = 3S _b/m (where S _b is the standard deviation of the blank signals and m is the slope of the calibration graph) was found to be 3 × 10⁻⁸ M. The relative standard deviation (RSD) for six repeated measurements of 1 × 10⁻⁴ M Enox was 1.35%. The method was applied to the determination of Enox in pharmaceutical formulation and recovery results were obtained from urine samples.     

Spectrofluorimetric Determination of Oxamniquine in Dosage Forms and Spiked Human Plasma through Derivatization with 1-dimethylaminonaphthalene-5-sulphonyl chloride

A sensitive, simple and selective spectrofluorimetric method was developed for the determination of oxamniquine (OXM) in pharmaceutical formulations and biological fluids. The method is based on the reaction between the drug and 1-dimethylaminonaphthalene-5-sulphonyl chloride (dansyl chloride) in presence of 0.5 M sodium carbonate (pH 10) to yield a highly fluorescent derivative that is measured at 445 nm after excitation at 335 nm. The different experimental parameters affecting the development and stability of the reaction product were carefully studied and optimized. The fluorescence concentration plot was rectilinear over the range of 0.02–0.2 μg ml⁻¹ with a lower detection limit (LOD) of 0.007 μg ml⁻¹ and limit of quantitation (LOQ) of 0.02 μg ml⁻¹. The proposed method was successfully applied to the analysis of commercial capsules. The results obtained were in good agreement with those obtained using the official spectrophotometric method. Furthermore, the method was applied for the determination of oxamniquine in spiked human plasma, the mean % recovery (n = 4) is 97.77 ± 1.19. A proposal of the reaction pathway was presented.     

Development of Flow Injection Spectrofluorimetric Detection System for the Determination of Homocysteine

In this work, a new simple and sensitive flow injection method is developed for the determination of homocysteine with spectrofluorimetric detection technique. This method is based on the oxidation of homocysteine with Tl (III) in acidic media, producing fluorescence reagent, TlCl₃^2- (λ_ex = 237 nm, λ_em = 419 nm). The effects of chemical parameters (including pH of the solutions, the buffer, Tl (III) and potassium chloride concentrations), instrumental parameters (such as flow rate of the solutions, reaction coil length, and sample loop volume) and temperature on the fluorescence intensity as an analytical signal are studied and optimized. In the optimum conditions of the above variables, homocysteine can be determined in the range 4.0 × 10^-7–40.0 × 10^-6 M with the LDR from 4.0 × 10^-7 to 25.0 × 10^-6 M. The detection limit (with S/N = 3) is 6.0 × 10^-8 M of homocysteine and precision for the injection of 5.0, 10.0 and 15.0 μM of homocysteine are 0.8%, 1.5% and 2.5% (n = 10) respectively. The rate of analysis is 90 samples per hour. The influence of potential interfering substances, including amino acids and carbohydrates is also studied. The proposed method has been successfully used for the determination of homocysteine in the real sample (blood serum and tap water) matrix.     

Spectrofluorimetric Protocol for Ceftriaxone in Commercial Formulation and Human Plasma After Condensation with Formaldehyde and Ethyl Acetoacetate

A new spectrofluorimetric method has been developed and validated for the quantification of ceftriaxone in bulk powder, pharmaceutical formulations and spiked human plasma. The developed method is reproducible, accurate, sensitive and cost effective. In this method, ceftriaxone was converted into a fluorescent compound by reacting with 0.8 M ethyl acetoacetate and 25% formaldehyde in a buffered medium (pH = 4.2) at 90 °C. The excitation and emission wavelengths of the fluorescent reaction product are 316 nm and 388 nm respectively. Optimization of the experimental conditions affecting the condensation reaction were carefully carried out and the optimum experimental conditions were incorporated in the procedure. The developed method has a broad linear range (0.2–20 μg mL⁻¹) with a correlation coefficient of 0.9992. The limit of detection (LOD) and limit of quantification (LOQ) was found to be 1.94 × 10⁻² μg mL⁻¹ and 6.47 × 10⁻² μg mL⁻¹ respectively. The common excipients and co-administered drugs were investigated for their interferences effect in the assay. The developed method was validated statistically through recovery studies and successfully applied to ceftriaxone determination in bulk powder, pharmaceutical formulations and spiked human plasma samples. The percent recoveries were found to be in the range of 99.04–100.26% for bulk powder, 98.88–99.92% for pharmaceutical formulations and 94.22–98.48% for spiked human plasma. The results were verified by comparing with reference literature HPLC method and were found in good agreement.     

Spectrofluorometric Determination of Methocarbamol in Pharmaceutical Preparations and Human Plasma

A simple, sensitive and rapid spectrofluorometric method for determination of methocarbamol in pharmaceutical formulations and spiked human plasma has been developed. The proposed method is based on the measurement of the native fluorescence of methocarbamol in methanol at 313 nm after excitation at 277 nm. The relative fluorescence intensity-concentration plot was rectilinear over the range of 0.05–2.0 μg/mL, with good correlation (r = 0.9999), limit of detection of 0.007 μg/ mL and a lower limit of quantification of 0.022 μg/ mL. The described method was successfully applied for the determination of methocarbamol in its tablets without interference from co-formulated drugs, such as aspirin, diclofenac, paracetamol and ibuprofen, The results obtained were in good agreement with those obtained using the official method (USP 30).The high sensitivity of the method allowed the determination of the studied drug in spiked human plasma with average percentage recovery of 99.42 ± 3.84.     

Study of Enhanced Chemiluminescence of Diperiodatocuprate (III) on 1,10-Phenanthroline/Hydrogen Peroxide/Cetyltrimethylammonium Bromide System

In the paper, a chemiluminescence (CL) system was developed based on the catalytical effect of diperiodatocuprate (III) (DPC) on the 1,10-phenanthroline (phen)/hydrogen peroxide (H₂O₂) in the presence of cetyltrimethylammonium bromide (CTAB). The effects of experimental conditions were investigated. Meanwhile the increase of CL intensity of the DPC/phen/H₂O₂/CTAB system is proportional to the concentration of phen in the range of low concentration. The linear range of the calibration curve is 5.0 × 10⁻⁹–1.0 × 10⁻⁶ mol L⁻¹, and the corresponding detection limit is 1.9 × 10⁻⁹ mol L⁻¹. The effects of phenolic compounds (PCs) on the system were investigated. Hydroquinone was used as an example to investigate the application of the CL system to the determination of PCs. The quenched CL intensity is linearly related to the logarithm of concentration of hydroquinone. The linear range of the calibration curve is 2.5 × 10⁻⁹–1.0 × 10⁻⁵ g mL⁻¹, and the corresponding detection limit is 1.8 × 10⁻⁹ g mL⁻¹. This phen and hydroquinone can be synchronously determined. The method was applied to the determination of hydroquinone in water samples and the recoveries were from 92% to 106%.     

Synthesis and field emission of two kinds of ZnO nanotubes: taper-like and flat-roofed tubes

Two kinds of ZnO nanotubes, including taper-like and flat-roofed tubes, have been successfully fabricated using a simple aqueous solution route by changing the experimental conditions. All the obtained nanotubes have a uniform size of 500 nm in diameter, 10–50 nm in wall thickness, and 2–5 μm in length. The growth mechanism of two kinds of ZnO nanotubes was investigated. Field emission measurements showed that tapering nanotubes have the good field emission performance with a low turn-on field of ∼ 2.1 V μm^-1 and a low threshold field of ∼ 3.8 V μm^-1, which suggests the possible applications of the ZnO tubular structures in field emission microelectronic devices. PACS 73.61.Ga; 73.63. Fg; 85.45.Db     

Solid Substrate–Room Temperature Phosphorimetry for the Determination of Trace Terbutaline Sulfate Based on Its Inhibition Oxidation of Rhodamine 6G by Sodium Periodate

When 1.00 mol l⁻¹ I⁻ is used as ion perturber, rhodamine 6G (Rh 6G) can emit strong and stable room temperature phosphorescence (RTP) on filter paper substrate in KHC₈H₄O₄–HCl buffer solution (pH = 3.50), heated at 70 °C for 10 min. NaIO₄ can oxidize Rh 6G, which makes the RTP signal quench. Terbutaline sulfate (TBS) can inhibit NaIO₄ from oxidizing Rh 6G, which makes the RTP signal of Rh 6G enhance sharply. The content of TBS is linear correlation to ΔIp of the system. Based on the facts above, a new inhibition solid substrate-room temperature phosphorimetry (SS-RTP) for the determination of trace TBS has been established. The linear range of this method is 0.0104–2.08 pg spot⁻¹ (corresponding concentration: 0.026–5.2 ng ml⁻¹, with a sample volume of 0.4 μl) with a detection limit (L.D.) of 2.6 fg spot⁻¹ (corresponding concentration: 6.5 × 10⁻¹² g ml⁻¹), and the regression equation of working curve is ΔIp = 2.040 + 54.54 m_TBS (pg spot⁻¹), n = 6, correlation coefficient is 0.9994. For the samples containing 0.0104 pg spot⁻¹ and 2.08 pg spot⁻¹ TBS, the relative standard deviation (RSD) are 3.8% and 2.3% (n = 8), respectively, indicating good precision. This method has been applied to determination of trace TBS in the practical samples with satisfactory results. The reaction mechanism of NaIO₄ oxidizing Rh 6G to inhibit SS-RTP for the determination of trace TBS is also discussed.     

High-sensitivity detection of NO2 using a 740 nm semiconductor diode laser

 An AlGaAs diode laser was used to detect NO₂ absorption lines belonging to the (0 0 0)–(2 13 1) vibrational band, within the X˜² A ₁ electronic ground state, at 739 nm. A simple absorption spectrometer based on wavelength-modulation spectroscopy with second-harmonic detection was developed. The minimum detectable pressure of pure NO₂ was 0.1 μbar with 2 m absorption path-length, corresponding to an absorbance of 10^-6. High-sensitivity detection of NO₂ was also performed in the presence of N₂ and air at different total pressures: The effects on the detection limit of our apparatus were accurately investigated. The minimum NO₂ concentration at 500 mbar of air was measured to be 2 ppm. Received: 11 June 1996 / Revised version: 11 October 1996     

Validated Spectrofluorimetric Method for the Determination of Lamotrigine in Tablets and Human Plasma Through Derivatization with <Emphasis Type="BoldItalic">o</Emphasis>-phthalaldehyde

A sensitive, simple and selective spectrofluorimetric method was developed for the determination of Lamotrigine (LMT) in pharmaceutical formulations and biological fluids. The method is based on reaction of LMT with o-phthalaldehyde in presence of 2-mercaptoethanol in borate buffer of pH 9.8 to yield a highly fluorescent derivative that is measured at 448 nm after excitation at 337 nm. The different experimental parameters affecting the development and stability of the reaction product were carefully studied and optimized. The fluorescence-concentration plot was rectilinear over the range of 0.1–1.0 μg ml⁻¹ with lower limit of detection (LOD) 0.02 μg ml⁻¹ and limit of quantification (LOQ) 0.06 μg ml⁻¹ respectively. The proposed method was successfully applied to the the analysis of commercial tablets. Statistical comparison of the results obtained by the proposed and reference method revealed no significant difference in the performance of the two methods regarding the accuracy and precision respectively. The proposed method was further extended to the in-vitro and in-vivo determination of the drug in spiked and real human plasma. The mean percentage recoveries in spiked and real human plasma (n = 3) were 95.78 ± 1.37 and 90.93 ± 2.34 respectively. Interference arising from co-administered drugs was also studied. A proposal for the reaction pathway with o-phthalaldehyde was postulated.     

Synthesis of Highly Selective Indole-Based Sensors for Mercuric Ion

Two indole-based fluorescent chemosensors 1 and 2 were prepared and investigated characteristic features with transition metal ions. Sensors 1 and 2 were selective for Hg²⁺ ion, among a series of metal ions, in aqueous ethanol (H₂O–EtOH, 1:2, v/v) with association constants of 5.74 × 10³ and 4.46 × 10³ M⁻¹ and detection limits of 7.4 and 6.8 μM, respectively. Computational results revealed that sensor 1 or 2 with Hg²⁺ ion formed 1:1 complex with a central, sandwich-coordinated Hg²⁺ ion. Computational calculations provided evidence that a sandwich-coordinated Hg²⁺ ion center was formed and the polyoxyethylene spacer acted as a scaffold for bringing functional ligands into a suitable geometry.     

Current status of astronomical observations on possible cosmological variations of the proton-to-electron mass ratio μ=m<Subscript>p</Subscript>/m<Subscript>e</Subscript>

Astronomical constraints on a possible cosmologicalvariation of the proton-to-electron mass ratio μ=m_p/m_e are discussed. The analysis of H₂ lines observed in thespectra of distant quasars Q 0405-443 (z_em=3.02) andQ 0347-383 (z_em=3.22) is performed [1] using, partly, very precise values of H₂ frequencies from new laboratorymeasurements [2] and sensitivity coefficients from newaccurate calculations [2,3]. A possibleμ-variation of Δμ/ μ= (2.0±0.6)×10^-5over 12 Gyr is not excluded. However, the discussion of systematicerrors show that some may well be underestimated. Thus, the abovevalue should be treated as the most stringent limit the cosmologicalvariation of μ at z≈2.6 - 3.0 (12 Gyr ago).     

Spectrofluorimetric Study and Detection of Ketoconazole in the Presence of β-cyclodextrin

The formation of a complex between ketoconazole and β-cyclodextrin was followed by spectrofluorimety. The inclusion of ketoconazole in β-cyclodextrin cavity enhanced the native fluorescence of the drug. The stoichiometry of the complex was 1:1 β-cyclodextrin to ketoconazole and the stability constant of the complex (log K _f) was determined to be 4.3 ± 0.01 at pH = 7.9 and 3.7 ± 0.04 at pH = 2.6. A sensitive spectrofluorimetric method for the detection of ketoconazole is presented. At optimized experimental conditions, a linear relationship between the fluorescence intensity of the solution and concentration of ketoconazole is observed in the range of 0.01–10 μg ml⁻¹ (5 × 10⁻⁸ M–1.88 × 10⁻⁵ M). The method was applied to the detection of ketoconazole in pharmaceutical products and the results were satisfactory in comparison to the official method (relative error = 2.8% and standard deviation = 0.06 for tablets of ketoconazole). The recovery of ketoconazole from a blood serum sample, determined by the proposed method, was 97.1 ± 2.4%.     

Terbium Sensitized Luminescence for the Determination of Ketoprofen in Pharmaceutical Formulations

This paper explores an ultra-sensitive luminescence method for the determination of Ketoprofen (KP) in pharmaceutical formulations. The technique is indirect and exploits the luminescence enhancement of terbium (Tb³⁺) by complexation with KP (Tb³⁺–KP), which was monitored at respective excitation and emission wavelengths of λ _ex = 258 nm and λ _em = 549 nm. The effect of varying the Tb³⁺ concentration and using multiple solvents was examined to determine optimal experimental conditions. Maximum sensitization was accomplished in the presence of methanol where the most favourable condition for the formation of the complex was recorded at a level of 1.0 × 10⁻⁵ M of Tb³⁺. Under these optimum experimental conditions, linear calibration curve was obtained in the range of 2.8 × 10⁻⁷–3.1 × 10⁻⁶ M with a detection limit of 8.7 × 10⁻⁸ M. The technique was validated with ‘working’ reference standards and produced relative standard deviations < 2% indicating that the reproducibility was highly acceptable. The proposed method was successfully applied to assays of KP in pharmaceutical formulations with average recoveries of 92–98%. The results were found to be in good agreement with those obtained by HPLC. The method is highly suited for general applications of this nature.     

Micelle-Enhanced Spectrofluorimetric Method for Determination of Cholesterol-Reducing Drug Ezetimibe in Dosage Forms

A simple and sensitive spectrofluorimetric method was developed for the determination of ezetimibe in its pharmaceutical formulations. The proposed method is based on investigation of the fluorescence spectral behavior of ezetimibe in sodium dodecyl sulfate (SDS) micellar system. In aqueous solution of acetate buffer pH 5.0, the fluorescence intensity of ezetimibe was greatly enhanced, 200% enhancement, in the presence of SDS. The fluorescence intensity of ezetimibe was measured at 380 nm after excitation at 268 nm. The fluorescence-concentration plot was rectilinear over the range of 0.03–3.0 μg/mL with lower detection limit of 3.08 × 10⁻³ μg/mL. The method was successfully applied to the analysis of ezetimibe in its commercial tablets; the results were in good agreement with those obtained with the reported method. The application of the proposed method was extended to the stability studies of ezetimibe after exposure to different forced degradation conditions, such as acidic, alkaline, photo and oxidative conditions, according to ICH guidelines.     

Second-derivative Synchronous Fluorometric Method for the Simultaneous Determination of Cinnarizine and Domperidone in Pharmaceutical Preparations. Application to Biological Fluids

A rapid, simple and highly sensitive second derivative synchronous fluorometric method has been developed for the simultaneous analysis of binary mixture of cinnarizine (CN) and domperidone (DOM). The method is based upon measurement of the native fluorescence of these drugs at Δλ = 80 nm in aqueous methanol (50% V/V). The different experimental parameters affecting the native fluorescence of the studied drugs were carefully studied and optimized. The fluorescence-concentration plots were rectilinear over the range of 0.1 to 1.3 μg mL⁻¹ and 0.1–3.0 μg mL⁻¹ for CN and DOM, respectively with lower detection limits of 0.017 and 5.77 × 10⁻³ μg mL⁻¹ and quantification limits of 0.058 and 0.02 μg mL⁻¹ for CN and DOM. The proposed method was successfully applied for the determination of the studied compounds in synthetic mixtures and in commercial tablets. The results obtained were in good agreement with those obtained with reference methods. The high sensitivity attained by the synchronous fluorometric method allowed the determination of CN in real and spiked human plasma. The mean % recoveries in case of spiked human plasma (n = 3) were 96.39 ± 1.18 while that in real human plasma (n = 3) was 104.67 ± 4.16.