Two New N‐(O‐Carbamoylglucopyranosyl)‐N‐dimethylansamitocins from Actinosynnema pretiosum

Two new and a known N‐(O‐carbamoylglucopyranosyl)ansamitocins were isolated from Actinosynnema pretiosum ssp. auranticum ATCC 31565. The known N‐(4‐O‐carbamoyl‐β‐D ‐glucopyranosyl)‐N‐demethylansamitocin P 2 (=ACGP‐2; 1 ) was assigned according to 1D‐ and 2D‐NMR data, and the two new compounds were identified as N‐(6‐O‐carbamoyl‐β‐D ‐glucopyranosyl)‐N‐demethylansamitocin P 2 (=ACGP‐2′; 2 ) and N‐(4‐O‐carbamoyl‐β‐D ‐glucopyranosyl)‐N‐demethylansamitocin P 1 (=ACGP‐1; 3 ) on the basis of spectroscopic data interpretation including 2D‐NMR and tandem MS analysis.     

N‐Germyl derivatives of sulfacetamide and ortho‐(sulfonamido)phenylamines: characterization of N‐[o‐(N′,N′‐dimethylsulfonamido)phenyl]‐N‐dimesitylgermaimine

Triethylgermylation of sulfacetamide occurs on the sulfonamido nitrogen in competition with the 1,2 addition of the starting triethylgermyl dimethylamine on the carbonyl group. Thermal decomposition in the presence of dimethylamine yields N‐triethylgermylsulfanilamide. Stable 1:1 sulfacetamide–DBU and 1:1 sulfacetamide–Et₃N complexes were isolated and fully characterized in the course of dehydrochlorination reactions. o‐Sulfonamidophenylamine yields N,N′‐bis‐triethylgermylated derivatives, whereas o‐(N,N‐dimethylsulfonamido)phenylamine leads to monogermylated compounds. The N‐dimethylaminodimesitylgermyl derivative is thermally stable. Dehydrohalogenation of the N‐dimesitylfluorogermyl compound leads to the thermally stable but water sensitive N‐[o‐(N′,N′‐dimethylsulfonamido)phenyl]‐N‐dimesitylgermaimine. Copyright © 2003 John Wiley & Sons, Ltd.     

Towards the syntheses of N‐H and N‐alkylated derivatives of meridianins

Novel N‐H and N‐alkylated derivatives of meridianins have been synthesized as potential antitumor agents by a two‐step conversion of N‐tosyl‐3‐acetylindoles or N‐alkyl‐3‐acetylindoles to the corresponding enaminones using DMF‐DMA, with or without added pyrrolidine. Further cyclization with guanidine gave the corresponding 2‐aminopyrimidines. The structures of the compounds, thus obtained, were proved by ¹H and ¹³C NMR spectroscopy, NOE experiments and X‐ray analysis.     

Two (Z)‐N‐aryl‐3‐benzylideneisoindolin‐1‐ones

Two isoindolin‐1‐one derivatives, (Z)‐3‐benzyl­idene‐N‐phenyl­isoindolin‐1‐one, C₂₁H₁₅NO, (II), and (Z)‐3‐benzyl­idene‐N‐(4‐methoxy­phenyl)­isoindolin‐1‐one, C₂₂H₁₇NO₂, (III), were synthesized by the palladium‐catalysed heteroannulation. The mol­ecules of both compounds have a Z configuration. The interplanar angles between the five‐ and six‐membered rings of the isoindolinone moiety in (II) and (III) are 1.66 (11) and 2.26 (7)°, respectively. The phenyl rings at the N‐position in (II) and (III) are twisted out of the C₄N ring plane by 62.77 (11) and 67.10 (7)°, respectively. The substitutions at the N and C‐3 positions of the isoindolinone system have little influence on the molecular dimensions of the resulting compounds.     

Two polymorphs of N‐(2,6‐difluorophenyl)formamide

The structures of two distinct polymorphic forms of N‐(2,6‐difluorophenyl)formamide, C₇H₅F₂NO, have been studied using single crystals obtained under different crystallizing conditions. The two forms crystallize in different space groups, viz. form (Ia) in the orthorhombic Pbca and form (Ib) in the monoclinic P2₁ space group. Each polymorph crystallizes with one complete molecule in the asymmetric unit and they have a similar molecular geometry, showing a trans conformation with the formamide group being out of the plane of the aromatic ring. The packing arrangements of the two polymorphs are quite different, with form (Ia) having molecules that are stacked in an alternating arrangement, linked into chains of N—H...O hydrogen bonds along the crystallographic a direction, while form (Ib) has its N—H...O hydrogen‐bonded molecules stacked in a linear fashion. A theoretical study of the two structures allows information to be gained regarding other contributing interactions, such as π–π and weak C—H...F, in their crystal structures.     

Radical polymerization of novel N‐substituted‐N‐vinylformamide derivatives with bulky chiral substitutents

A series of novel N‐substituted‐N‐vinylformamides were synthesized, and the effect of bulky substituents on their radical polymerizability and polymer structure were investigated. N‐(p‐Methoxybenzyl)‐N‐vinylformamide ( 3 ) and N‐cyclohexylmethyl‐N‐vinylformamide ( 4 ) generated polymers, while it was known that their N‐vinylacetamide derivatives did not. ¹H NMR and ¹³C NMR analyses of poly( 3 ), however, revealed almost no difference among the various polymerization conditions, implying that the substituent bulkiness did not influence the polymer structures. On the other hand, the chiral polymers, which were obtained by the radical polymerization of N‐(S)‐2‐methylbutyl‐N‐vinylformamide ((S)‐ 5 ) and N‐(S)‐2,3‐dihydroxypropyl‐N‐vinylformamide ((S)‐ 7 ) at 0 °C, showed sharper spectral patterns than those obtained at higher polymerization temperatures. Furthermore, the intensities of their positive cotton effects on circular dichroism increased when the polymerization temperature was low, suggesting that the substituent bulkiness of (S)‐ 5 and (S)‐ 7 influenced the polymer structures, such as their stereoregularity and regioregularity. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Crystallographic report: Bis(N‐cyclohexyl,N‐methyldithiocarbamato)zinc(II)

The mononuclear structure of Zn[S₂CN(Me)Cy)]₂ features a tetrahedral zinc center defined by two chelating dithiocarbamate ligands. Copyright © 2004 John Wiley & Sons, Ltd.     

N‐Benzoyl‐N′,N′‐dibutylselenourea and its palladium(II) complex

The crystal and molecular structures of N‐benzoyl‐N′,N′‐dibutylselenourea (HL), C₁₆H₂₄N₂OSe, and the corresponding complex bis(N‐benzoyl‐N′,N′‐dibutylselenoureato‐κ²Se,O)palladium(II), [Pd(C₁₆H₂₃N₂OSe)₂], are reported. The selenourea molecule is characterized by intermolecular hydrogen bonds between the selenoamidic H atom and the Se atom of a neighbouring molecule forming a dimer, presumably as a consequence of resonance‐assisted hydrogen bonding or π‐bonding co‐operativity. A second dimeric hydrogen bond is also described. In the palladium complex, the typical square‐planar coordination characteristic of such ligands results in a cis‐[Pd(L‐Se,O)₂] complex.     

(N‐Maleoylglycinato)trimethyltin(IV)

The Sn atom in the crystal structure of the title compound,catena‐poly­[trimethyl­tin‐μ‐[(2,5‐di­oxo‐2,5‐di­hydro­pyrrol‐1‐yl)­acetato‐O:O′]], [Sn(CH₃)₃(C₆H₄NO₄)], adopts a distorted trigonal bipyramidal coordination geometry with three methyl groups defining the trigonal plane [mean Sn—C 2.117 (11) Å] and the axial positions occupied by O atoms from different carboxylate groups, with significantly different Sn—O bond lengths [2.207 (5) and 2.358 (6) Å]. The structure forms a polymeric chain of complex molecules linked via carboxylate moieties.     

(E)‐N′‐(4‐Chlorobenzylidene)‐, (E)‐N′‐(4‐bromobenzylidene)‐ and (E)‐N′‐[4‐(diethylamino)benzylidene]‐ derivatives of 4‐hydroxybenzohydrazide

The 4‐chloro‐ [C₁₄H₁₁ClN₂O₂, (I)], 4‐bromo‐ [C₁₄H₁₀BrN₂O₂, (II)] and 4‐diethylamino‐ [C₁₈H₂₁N₃O₂, (III)] derivatives of benzylidene‐4‐hydroxybenzohydrazide, all crystallize in the same space group (P2₁/c), (I) and (II) also being isomorphous. In all three compounds, the conformation about the C=N bond is E. The molecules of (I) and (II) are relatively planar, with dihedral angles between the two benzene rings of 5.75 (12) and 9.81 (17)°, respectively. In (III), however, the same angle is 77.27 (9)°. In the crystal structures of (I) and (II), two‐dimensional slab‐like networks extending in the a and c directions are formed via N—H...O and O—H...O hydrogen bonds. The molecules stack head‐to‐tail viaπ–π interactions involving the aromatic rings [centroid–centroid distance = 3.7622 (14) Å in (I) and 3.8021 (19) Å in (II)]. In (III), undulating two‐dimensional networks extending in the b and c directions are formed via N—H...O and O—H...O hydrogen bonds. The molecules stack head‐to‐head viaπ–π interactions involving inversion‐related benzene rings [centroid–centroid distances = 3.6977 (12) and 3.8368 (11) Å].     

Crystallographic report: Bis[bis(N‐methyl‐N‐phenyldithiocarbamato)‐(methylxanthato)bismuth(III)]

The centrosymmetric structure of {Bi[S₂CN(Me)Ph]₂(S₂COMe)}₂ features chelating dithiocarbamate and xanthate ligands, as well as intermolecular Bi·S interactions, so that a distorted pentagonal bipyramidal S₇ coordination geometry results. Copyright © 2004 John Wiley & Sons, Ltd.     

Photoinduced Cyclization of (o‐Alkylbenzoyl)phosphonates to Benzocyclobutenols

(o ‐Alkylbenzoyl)phosphonates readily cyclize to highly strained benzocyclobutenols simply upon irradiation with UV light. The remarkable efficiency is ascribed to the electron‐accepting character of the phosphonate substituent, which facilitates thermal ring closing of the o ‐quinodimethane intermediate and suppresses reversion to the starting carbonyl compound.     

Synthesis and Spectroscopic Study of Some New Phosphoramidates,Crystal Structures of N‐Benzoyl‐N′,N″‐bis(azetidinyl)phosphoric Triamide and N‐Benzoyl‐N′,N″‐bis(hexamethylenyl)phosphoric Triamide

Some new N‐carbonyl, phosphoramidates with formula C₆H₅C(O)N(H)P(O)R₂ (R = NC₃H₆ ( 1 ), NC₆H₁₂ ( 2 ), NHCH₂CH=CH₂ ( 3 ), N(C₃H₇)₂ ( 4 )) and CCl₃C(O)N(H)P(O)R′₂ (R′ = NC₃H₆ ( 5 ), NHCH₂CH=CH₂ ( 6 )) were synthesized and characterized by ¹H, ¹³C, ³¹P NMR and IR spectroscopy and elemental analysis. The structures were determined for compounds 1 and 2 . Compound 1 exists as two crystallographically independent molecules in crystal lattice. Both compounds 1 and 2 produced dimeric aggregates via intermolecular ‐P=O…H‐N‐ hydrogen bonds, which in compound 2 is a centrosymmetric dimer. In compounds with four‐membered ring amine groups, ³J(P,C)>²J(P,C), in agreement with our previous studies about five‐membered ring amine groups. Also, ³J(P,C) values in compounds 1 and 5 are greater than in compounds with five‐, six‐ and seven‐membered ring amine groups.     

Convergent Synthesis of a Bisecting N‐Acetylglucosamine (GlcNAc)‐Containing N‐Glycan

The chemical synthesis of a bisecting N‐acetylglucosamine (GlcNAc)‐containing N‐glycan was achieved by a convergent synthetic route through [4+2] and [6+2] glycosylations. This synthetic route reduced the number of reaction steps, although the key glycosylations were challenging in terms of yields and selectivities owing to steric hindrance at the glycosylation site and a lack of neighboring group participation. The yields of these glycosylations were enhanced by stabilizing the oxocarbenium ion intermediate through ether coordination. Glycosyl donor protecting groups were explored in an effort to realize perfect α selectivity by manipulating remote participation. The simultaneous glycosylations of a tetrasaccharide with two disaccharides was investigated to efficiently construct a bisecting GlcNAc‐containing N‐glycan.     

Synthese und Struktur von N,N,N‴,N‴‐Tetraisobutyl‐N′,N″‐isophthaloylbis(thioharnstoff) und Dimethanol‐bis(N,N,N‴,N‴‐tetraisobutyl‐N′,N″‐isophthaloylbis(thioureato))dicobalt(II)

Synthesis and Structure of N,N,N?,N?‐Tetraisobutyl‐N′,N″‐isophthaloylbis(thiourea) and Dimethanol‐bis(N,N,N?,N?‐tetraisobutyl‐N′,N″‐isophthaloylbis(thioureato))dicobalt(II) The synthesis and the crystal structure of the ligand N,N,N?,N?‐tetraisobutyl‐N′,N″‐isophthaloylbis(thiourea) and its Co^II‐complex are reported. The ligand co‐ordinates quadridentately forming a di‐bischelate. The donor atoms O and S are arranged in cis‐position around the central Co^II ions. In addition the co‐ordination geometry is determined by methanol molecules resulting in the co‐ordination number five. The complex crystallizes in the space group P1 (Z = 1) with two additional methanol molecules per formula unit. The free ligand crystallizes in the space group P1 (Z = 2) with one methanol molecule per formula unit. It shows the typical keto form of N‐acylthioureas with a protonated central N atom. The structures of both acylthiourea fragments come close to E,Z′‐configurations.     

Phosphorylation of N‐iso‐propyl‐ and N‐tert‐butylpyrroles with phosphorus(III) halides

The investigation concerns the effect of a bulky substituent at the pyrrole nitrogen atom on the orientation and regioselectivity of pyrrole phosphorylation with phosphorus(III) halides. As shown, phosphorylation of N‐iso‐propylpyrrole with phosphorus tribromide or trichloride proceeds nonregioselectively at positions 2 and 3 but it is followed by the 2 → 3 migration of the dihalogenophosphine group which quantitatively yields the 3‐isomer. N‐tert‐butylpyrrole is regioselectively phosphorylated with halogenophosphines at position 3. The tert‐butyl substituent at the nitrogen atom does not preclude the binding of even two or three pyrrolyl residues to the phosphorus atom. The key compounds, 3‐pyrrolyldihalogenophosphines, were isolated in a pure state, characterized and used to obtain a number of stable phosphorus(V) derivatives. © 2005 Wiley Periodicals, Inc. Heteroatom Chem 16:599–604, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20158     

Two N‐(2‐phenylethyl)nitroaniline derivatives as precursors for slow and sustained nitric oxide release agents

Notwithstanding its simple structure, the chemistry of nitric oxide (NO) is complex. As a radical, NO is highly reactive. NO also has profound effects on the cardiovascular system. In order to regulate NO levels, direct therapeutic interventions include the development of numerous NO donors. Most of these donors release NO in a single high‐concentration burst, which is deleterious. N‐Nitrosated secondary amines release NO in a slow, sustained, and rate‐tunable manner. Two new precursors to sustained NO‐releasing materials have been characterized. N‐[2‐(3,4‐Dimethoxyphenyl)ethyl]‐2,4‐dinitroaniline, C₁₆H₁₇N₃O₆, (I), crystallizes with one independent molecule in the asymmetric unit. The adjacent amine and nitro groups form an intramolecular N—H…O hydrogen bond. The anti conformation about the phenylethyl‐to‐aniline C—N bond leads to the planes of the arene and aniline rings being approximately perpendicular. Molecules are linked into dimers by weak intermolecular N—H…O hydrogen bonds such that each amine H atom participates in a three‐center interaction with two nitro O atoms. The dimers pack so that the arene rings of adjacent molecules are not parallel and π–π interactions do not appear to be favored. N‐(4‐Methylsulfonyl‐2‐nitrophenyl)‐l ‐phenylalanine, C₁₆H₁₆N₂O₆S, (II), with an optically active center, also crystallizes with one unique molecule in the asymmetric unit. The l enantiomer was established via the configuration of the starting material and was confirmed by refinement of the Flack parameter. As in (I), there is an intramolecular N—H…O hydrogen bond between adjacent amine and nitro groups. The conformation of the molecule is such that the arene rings display a dihedral angle of ca 60°. Unlike (I), molecules are not linked via intermolecular N—H…O hydrogen bonds. Rather, the carboxylic acid H atom forms a classic, approximately linear, O—H…O hydrogen bond with a sulfone O atom. Pairs of molecules related by twofold rotation axes are linked into dimers by two such interactions. The packing pattern features a zigzag arrangement of the arene rings without apparent π–π interactions. These structures are compared with reported analogues, revealing significant differences in molecular conformation, intermolecular interactions, and packing that result from modest changes in functional groups. The structures are discussed in terms of potential NO‐release capability.     

Synthesis and functionalities of poly(N‐vinylalkylamide). XII. Synthesis and thermosensitive property of poly(vinylamine) copolymer prepared from poly(N‐vinylformamide‐co‐N‐vinylisobutyramide)

The differences in the polymerization abilities of N‐vinylformamide (NVF) and N‐vinylisobutyramide (NVIBA) and the synthesis of their copolymers were studied. The polymerization abilities were fairly good and quite similar to those of N‐vinyl‐ acetamide (NVA), a monomer in the same class as N‐vinylalkylamides. Since the monomer reactivity ratios were r₁ = 1.08 and r₂ = 0.92 (M₁ = NVF, M₂ = NVIBA), respectively, it is clear that the comonomers definitely were converted to random copolymers. The resulting copolymers poly(NVF‐co‐NVIBA) exhibited the cloud points sharply. The light transmittance profiles were the same as those for poly(NVIBA) although they increased from 39 °C for poly(NVIBA), with an increase in the corresponding hydrophilic NVF component. Our final objective was to produce a cloud point controlled polymer material with primary amino groups. To achieve this, we examined the hydrolysis of poly(NVF), poly(NVA), poly(NVIBA), and poly(NVF‐co‐NVIBA) to obtain poly(vinylamine) [poly(VAm)]. The hydrolytic cleavage of poly(NVF) and poly(NVA) was promoted by an increase in temperature. However, poly(NVIBA) was not cleaved appreciably. The hydrolysis of poly(NVF‐co‐NVIBA) was done under controlled conditions, and amino groups selectively were introduced to only one of two components of the copolymer. The cloud point of the hydrolyzed copolymer shifted to a higher temperature than that of the copolymer. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3674–3681, 2000     

Living anionic polymerization of N‐methoxymethyl‐N‐isopropylacrylamide: Synthesis of well‐defined poly(N‐isopropylacrylamide) having various stereoregularity

Anionic polymerization of N‐methoxymethyl‐N‐isopropylacrylamide ( 1 ) was carried out with 1,1‐diphenyl‐3‐methylpentyllithium and diphenylmethyllithium, ‐potassium, and ‐cesium in THF at ?78 °C for 2 h in the presence of Et₂Zn. The poly( 1 )s were quantitatively obtained and possessed the predicted molecular weights based on the feed molar ratios between monomer to initiators and narrow molecular weight distributions (M_w/M_n = 1.1). The living character of propagating carbanion of poly( 1 ) either at 0 or ?78 °C was confirmed by the quantitative efficiency of the sequential block copolymerization using N,N‐diethylacrylamide as a second monomer. The methoxymethyl group of the resulting poly( 1 ) was completely removed to give a well‐defined poly(N‐isopropylacrylamide), poly(NIPAM), via the acidic hydrolysis. The racemo diad contents in the poly(NIPAM)s could be widely changed from 15 to 83% by choosing the initiator systems for 1 . The poly(NIPAM)s obtained with Li⁺/Et₂Zn initiator system possessed syndiotactic‐rich configurations (r = 75–83%), while either atactic (r = 50%) or isotactic poly(NIPAM) (r = 15–22%) was generated with K⁺/Et₂Zn or Li⁺/LiCl initiator system, respectively. Atactic and syndiotactic poly(NIPAM)s (42 < r < 83%) were water‐soluble, whereas isotactic‐rich one (r < 31%) was insoluble in water. The cloud points of the aqueous solution of poly(NIPAM)s increased from 32 to 37 °C with the r‐contents. These indicated the significant effect of stereoregularity of the poly(NIPAM) on the water‐solubility and the cloud point in water © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4832–4845, 2006