Phosphaniminato‐Acetato‐Komplexe von Cobalt und Cadmium mit M4N4‐Heterocuban‐Struktur

Phosphoraneiminato‐Acetato Complexes of Cobalt and Cadmium with M₄N₄ Heterocubane Structure The phosphoraneiminato‐acetato complexes [M(NPEt₃)(O₂C–CH₃)]₄ with M = Co and Cd are formed from the anhydrous metal(II) acetates with excess Me₃SiNPEt₃ at 180 °C. By crystallization from diethyl ether blue, moisture sensitive single crystals of [Co(NPEt₃) · (O₂C–CH₃)]₄ can be obtained, while colourless single crystals of [Cd(NPEt₃)(O₂C–CH₃)]₄ · 2 CH₂Cl₂ originate from dichloromethane solution. In vacuo the intercalary CH₂Cl₂ is released. The complexes are characterized by their IR spectra and by crystal structure analyses. In both complexes the metal atoms are associated via μ₃–N bridges of the (NPEt₃^–) groups to form heterocubanes. In the cobalt complex the acetato ligands are bonded in a semichelate fashion with a short Co–O and a long Co–O bond each (Co–O distances in average 199.5 and 257.4 pm). In the cadmium complex the acetato groups form almost symmetrical chelates (Cd–O distances in average 232.1 and 237.8 pm); this leads to a distorted trigonal‐bipyramidal arrangement at the cadmium atoms. [Co(NPEt₃)(O₂C–CH₃)]₄: Space group P 1, Z = 4, lattice dimensions at –60 °C: a = 1110.1(2), b = 2051.3(5), c = 2169.5(4) pm, α = 100.03(2)°, β = 103.404(15)°, γ = 97.63(2)°, R = 0.0480. [Cd(NPEt₃)(O₂C–CH₃)]₄ · 2 CH₂Cl₂: Space group C2/c, Z = 4, lattice dimensions at –80 °C: a = 1550.2(1), b = 2101.1(1), c = 1706.1(1) pm, β = 91.09(1)°, R = 0.0311.     

(E)‐1‐(2′‐Deoxy‐β‐d‐ribo­furan­osyl)‐2,4‐di­fluoro‐5‐(2‐iodo­vinyl)­benzene

This analysis of the title compound, C₁₃H₁₃F₂IO₃, establishes the orientation of (E)‐5‐(CH=CH—I) as antiperiplanar (ap) to the C—C bond (5–6 position) of the 2,4‐di­fluoro­phenyl ring system, with the (E)‐5‐(CH=CH—I) H atom located in close proximity (2.17 Å) to the F4 atom of the 2,4‐di­fluoro­phenyl moiety.     

Technetium Complexes with 2‐Mercapto‐methyltetrazolate

2‐Mercapto‐methyltetrazolate, Smetetraz^–, acts as monoanionic, monodentate ligand in a number of technetium compounds. Anionic Tc^V complexes of the types [TcO(Smetetraz)₄]^– and [TcN(Smetetraz)₄]^2– are formed when (Bu₄N)[Tc^VOCl₄] or (Bu₄N)[Tc^VINCl₄], respectively, react with Na(Smetetraz). Reduction of the metal takes place in the latter case. (Bu₄N)₂[TcN(Smetetraz)₄] crystallises in the monoclinic space group Pc (a = 9.701(5), b = 17.570(5), c = 16.821(10) Å, β = 96.50(3)°, Z = 2). The Tc atom is situated 0.580(3) Å above the basal plane of a square pyramid which is formed by the sulfur atoms and the nitrido ligand as its apex. The Tc–S bond lengths lie between 2.384(3) and 2.410(3) Å. [Tc(PPh₃)(Smetetraz)₃(CH₃CN)] is formed during the reaction of [TcCl₃(PPh₃)₂(CH₃CN)] with NaSmetetraz as blue needles with co‐crystallised solvent toluene (space group C2/c, a = 24.188(4), b = 14.373(1), c = 25.617(5) Å, β = 109.48(1)°, Z = 8). The metal atom is coordinated by PPh₃ and CH₃CN in the axial position of a trigonal bipyramid. All three aryl rings are on the sterically less strained side of the plane defined by the sulfur atoms. The Tc–S bond lengths range between 2.233(2) and 2.247(2) Å.     

Synthese und Kristallstruktur des heterobimetallischen Diorganozinndichlorids (FcN,N)2SnCl2 (FcN,N—: (η5‐C5H5)Fe{(η5‐C5H3[CH(CH3)N(CH3)CH2CH2NMe2]‐2}—)

Synthesis and Crystal Structure of the Heterobimetallic Diorganotindichloride (FcN, N)₂SnCl₂ (FcN, N^—: (η⁵‐C₅H₅)Fe{η⁵‐C₅H₃[CH(CH₃)N(CH₃)CH₂CH₂NMe₂]‐2}^—) The heterobimetallic title compound [(FcN, N)₂SnCl₂] ( 1 ) was obtained by the reaction of [LiFcN, N] with SnCl₄ in the molar ratio 1:1 in diethylether as a solvent. The two FcN, N^— ligands in 1 are bound to Sn through a C‐Sn σ‐bond; the amino N atoms of the side‐chain in FcN, N^— remain uncoordinated. The crystals contain monomeric molecules with a pseudo‐tetrahedral coordination at the Sn atom: Space group P2₁/c; Z = 4, lattice dimensions at —90 °C: a = 9.6425(2), b = 21.7974(6), c = 18.4365(4) Å, β = 100.809(2)°, R1_obs· = 0.051, wR2_obs· = 0.136.     

Nature of the Arsonium‐Ylide Ph3As=CH2 and a Uranium(IV) Arsonium–Carbene Complex

Treatment of [Ph₃EMe][I] with [Na{N(SiMe₃)₂}] affords the ylides [Ph₃E=CH₂] (E=As, 1As ; P, 1P ). For 1As this overcomes prior difficulties in the synthesis of this classical arsonium‐ylide that have historically impeded its wider study. The structure of 1As has now been determined, 45 years after it was first convincingly isolated, and compared to 1P , confirming the long‐proposed hypothesis of increasing pyramidalisation of the ylide‐carbon, highlighting the increasing dominance of E⁺?C^? dipolar resonance form (sp³‐C) over the E=C ene π‐bonded form (sp²‐C), as group 15 is descended. The uranium(IV)–cyclometallate complex [U{N(CH₂CH₂NSiPrⁱ₃)₂(CH₂CH₂SiPrⁱ₂CH(Me)CH₂)}] reacts with 1As and 1P by α‐proton abstraction to give [U(Tren^TIPS)(CHEPh₃)] (Tren^TIPS=N(CH₂CH₂NSiPrⁱ₃)₃; E=As, 2As ; P, 2P ), where 2As is an unprecedented structurally characterised arsonium‐carbene complex. The short U?C distances and obtuse U‐C‐E angles suggest significant U=C double bond character. A shorter U?C distance is found for 2As than 2P , consistent with increased uranium‐ and reduced pnictonium‐stabilisation of the carbene as group 15 is descended, which is supported by quantum chemical calculations.     

The Stability of α‐Hydroperoxyalkyl Radicals

High‐level ab initio and Born–Oppenheimer molecular dynamic calculations have been carried out on a series of hydroperoxyalkyl (α‐QOOH) radicals with the aim of investigating the stability and unimolecular decomposition mechanism into QO+OH of these species. Dissociation was shown to take place through rotation of the C?O(OH) bond rather than through elongation of the CO?OH bond. Through the C?O(OH) rotation, the unpaired electron of the radical overlaps with the electron density on the O?OH bond, and from this overlap the C=O π bond forms and the O?OH bond breaks spontaneously. The CH₂OOH, CH(CH₃)OOH, CH(OH)OOH, and α‐hydroperoxycycloheptadienyl radical were found to decompose spontaneously, but the CH(CHO)OOH has a decomposition energy barrier of 5.95 kcal mol^?1 owing to its steric and electronic features. The systems studied in this work provide the first insights into how structural and electronic effects govern the stabilizing influence on elusive α‐QOOH radicals.     

Syntheses and Spectroscopic Study of Some New N‐4‐Fluorobenzoyl Phosphoric Triamides; Crystal Structures of 4‐F‐C6H4C(O)N(H)P(O)R2, R = NH‐C(CH3)3, NH‐CH2C6H5, N(CH3)(CH2C6H5)

Some new N‐4‐Fluorobenzoyl phosphoric triamides with formula 4‐F‐C₆H₄C(O)N(H)P(O)X₂, X = NH‐C(CH₃)₃ ( 1 ), NH‐CH₂‐CH=CH₂ ( 2 ), NH‐CH₂C₆H₅ ( 3 ), N(CH₃)(C₆H₅) ( 4 ), NH‐CH(CH₃)(C₆H₅) ( 5 ) were synthesized and characterized by ¹H, ¹³C, ³¹P NMR, IR and Mass spectroscopy and elemental analysis. The structures of compounds 1 , 3 and 4 were investigated by X‐ray crystallography. The P=O and C=O bonds in these compounds are anti. Compounds 1 and 3 form one dimensional polymeric chain produced by intra‐ and intermolecular ‐P=O···H‐N‐ hydrogen bonds. Compound 4 forms only a centrosymmetric dimer in the crystalline lattice via two equal ‐P=O···H‐N‐ hydrogen bonds. ¹H and ¹³C NMR spectra show two series of signals for the two amine groups in compound 1 . This is also observed for the two α‐methylbenzylamine groups in 5 due to the presence of chiral carbon atom in molecule. ¹³C NMR spectrum of compound 4 shows that ²J(P,C_aliphatic) coupling constant for CH₂ group is greater than for CH₃ in agreement with our previous study. Mass spectra of compounds 1 ‐ 3 (containing 4‐F‐C₆H₄C(O)N(H)P(O) moiety) indicate the fragments of amidophosphoric acid and 4‐F‐C₆H₄CN⁺ that formed in a pseudo McLafferty rearrangement pathway. Also, the fragments of aliphatic amines have high intensity in mass spectra.     

N‐Chloro­acetyl‐β‐alanine

The β‐alanine residue of the title compound, C₅H₈ClNO₃, has a ggt folded conformation, which is mainly stabilized through intermolecular N—H⋯O=C (amide–acid) and O—H⋯O=C (acid–amide) hydrogen bonds. In addition, a cis conformation is found for the Cl—CH₂—C(=O)—NH torsion angle, which is associated with the presence of an intramolecular hydrogen bond.     

Polymerization of 2‐pentene with Ni(II) α‐diimine complex/M‐MAO catalyst and structure of the polymer

Polymerization of 2‐pentene with [ArN?C(An)C(An)·NAr)NiBr₂ (Ar?2,6‐iPr₂C₆H₃)] ( 1‐Ni) /M‐MAO catalyst was investigated. A reactivity between trans‐2‐pentene and cis‐2‐pentene on the polymerization was quite different, and trans‐2‐pentene polymerized with 1‐Ni /M‐MAO catalyst to give a high molecular weight polymer. On the other hand, the polymerization of cis‐2‐butene with 1‐Ni /M‐MAO catalyst did not give any polymeric products. In the polymerization of mixture of trans‐ and cis‐2‐pentene with 1‐Ni /M‐MAO catalyst, the M_n of the polymer increased with an increase of the polymer yields. However, the relationship between polymer yield and the M_n of the polymer did not give a strict straight line, and the M_w/M_n also increased with increasing polymer yield. This suggests that side reactions were induced during the polymerization. The structures of the polymer obtained from the polymerization of 2‐ pentene with 1‐Ni /M‐MAO catalyst consists of ? CH₂? CH₂? CH(CH₂CH₃)? , ? CH₂? CH₂? CH₂? CH(CH₃)? , ? CH₂? CH(CH₂CH₂CH₃)? , and methylene sequence ? (CH₂)_n? (n ≥ 5) units, which is related to the chain walking mechanism. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2858–2863, 2008     

1‐Silacyclopent‐2‐enes and 1‐silacyclohex‐2‐enes bearing functionally substituted silyl groups in 2‐positions. Novel electron‐deficient Si?H?B bridges

The reactions of alkyn‐1‐yl(vinyl)silanes R₂Si[C?C‐Si(H)Me₂]CH?CH₂ [R = Me (1a), Ph (1b)], Me₂Si[C?C‐Si(Br)Me₂]CH?CH₂ (2a), and of alkyn‐1‐yl(allyl)silanes R₂Si[C?C‐Si(H)Me₂]CH₂CH?CH₂ (R = Me (3a), R = Ph (3b)] with 9‐borabicyclo[3.3.1]nonane in a 1:1 ratio afford in high yield the 1‐silacyclopent‐2‐ene derivatives 4a, b and 5a, and the 1‐silacyclohex‐2‐ene derivatives 6a, b, respectively, all of which bear a functionally substituted silyl group in 2‐position and the boryl group in 3‐position. This is the result of selective intermolecular 1,2‐hydroboration of the vinyl or allyl group, followed by intramolecular 1,1‐organoboration of the alkynyl group. In the cases of 4a, b, potential electron‐deficient Si? H? B bridges are absent or extremely weak, whereas in 6a,b the existence of Si? H? B bridges is evident from the NMR spectroscopic data (¹H, ¹¹B, ¹³C and ²⁹Si NMR). The molecular structure of 4b was determined by X‐ray analysis. Copyright © 2005 John Wiley & Sons, Ltd.     

Polymerization and copolymerization of functionalized 2‐alkoxy‐1‐methylenecyclopropanes to form new polymers having alkoxy substituents

The polymers with functionalized alkoxy groups and with narrow molecular weight distribution (M_w/M_n < 1.12) are obtained from the living polymerization of 2‐alkoxy‐1‐methylenecyclopropanes using π‐allylpalladium complex, [(PhC₃H₄)Pd(μ‐Cl)]₂, as the initiator. The polymers with oligoethylene glycol groups in the alkoxy substituent are soluble in water, and hydroboration of the C?C double bond and ensuing addition of the OH groups to C?N bond of alkyl isocyanate produce the polymers with urethane pendant groups. The reaction decreases solubility of the polymer in water significantly. Di‐ and triblock copolymers of the 2‐alkoxy‐1‐methylenecyclopropanes are prepared by consecutive addition of the two or three 2‐alkoxy‐1‐methylenecyclopropane monomers to the Pd initiator. The polymers which contain both hydrophobic butoxy or tert‐butoxy group and hydrophilic oligoethylene glycol group dissolve in water and/or organic solvents, depending on the substituents. The ¹H NMR spectrum of poly( 1a ‐b‐ 1h ) (? (CH₂C(?CH₂)CHOBu)_n? (CH₂C(?CH₂)CH(OCH₂CH₂)₃OMe)_m? ) in D₂O solution exhibits peaks because of the butoxy and ?CH₂ hydrogen in decreased intensity, indicating that the polymer forms micelle particles containing the hydrophilic segments in their external parts. Aqueous solution of the polymer with a small amount of DPH (DPH = 1,6‐diphenyl‐1,3,5‐hexatriene) shows the absorbance due to DPH at concentration of the polymer higher than 5.82 × 10^?5 g mL^?1. Other block copolymers such as poly( 1b ‐b‐ 1h ) and poly( 1a ‐b‐ 1g ) also form the micelles that contain DPH in their core. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 959–972, 2009     

Nonadditivity of methyl group in single‐electron hydrogen bond of methyl radical‐water complex

The nonadditivity of methyl group in the single‐electron hydrogen bond of the methyl radical‐water complex has been studied with quantum chemical calculations at the UMP2/6‐311++G(2df,2p) level. The bond lengths and interaction energies have been calculated in the four complexes: CH₃? H₂O, CH₃CH₂? H₂O, (CH₃)₂CH? H₂O, and (CH₃)₃C? H₂O. With regard to the radicals, tert‐butyl radical forms the strongest hydrogen bond, followed by iso‐propyl radical and then ethyl radical; methyl radical forms the weakest hydrogen bond. These properties exhibit an indication of nonadditivity of the methyl group in the single‐electron hydrogen bond. The degree of nonadditivity of the methyl group is generally proportional to the number of methyl group in the radical. The shortening of the C···H distance and increase of the binding energy in the (CH₃)₂CH? H₂O and (CH₃)₃C? H₂O complexes are less two and three times as much as those in the CH₃CH₂? H₂O complex, respectively. The result suggests that the nonadditivity among methyl groups is negative. Natural bond orbital (NBO) and atom in molecules (AIM) analyses also support such conclusions. © 2008 Wiley Periodicals, Inc. Int J Quantum Chem, 2009     

High‐valent Molybdenum Imido Complexes with Tethered Olefins

Against the background of the (propene)Mo(=O)(=NH) and (allyl)Mo(=O)(=NH) surface species suggested as intermediates of the SOHIO process the potential of H₂N–C₆H₄–CH₂– CH=CH–CH₃, ( I ), for the introduction of chelating imido/olefin or imido/allyl ligands at highvalent Mo centres was tested. Reaction of I with Na₂[MoO₄] and trimethylchlorosilane yielded [Cl₂Mo(=N–C₆H₄–CH₂–CH=CH–CH₃)₂(dme)] ( 1 ), containing pendant olefinic arms. All attempts to introduce the olefin into the coordination sphere of the Mo centre failed. The same observation was made with [Cl₂Mo(=O)(=N–C₆H₄–CH₂–CH=CH–CH₃)(dme)] ( 2 ), synthesised via a commutation reaction from 1 and[(dme)Cl₂Mo(=O)₂]. Reaction of three equivalents of I with [CpMoCl_4′] yields [CpCl₂Mo(=N–C₆H₄–CH₂–CH=CH–CH₃)], ( 3 ), again with a pendant olefin arm; the products of experiments aiming at coordinating it to the Mo atom eluded isolation. I thus does not seem suitable for the synthesis of complexes with imido/olefin or imido/allyl ligands. However, products 1 – 3 , (two of which ( 1 , 3 ) were also characterised by single crystal X‐ray diffraction) are nevertheless interesting, e.g., with respect to the grafting of molybdenum complexes on the surfaces of solid supports to obtain heterogeneous oxidation catalysts.     

Coupling of internal rotations in propanelike molecules

A linear-combination-of-bond-orbitals (LCBO) formulation of INDO–SCF–MO theory is employed to investigate the origin of rotation barrier coupling in propane and related molecules. The dominant contributions to rotor coupling in propane are identified to be (i) a direct steric (bond–bond) interaction, involving the close approach of two methyl CH bonds in the eclipsed–eclipsed geometry, and (ii) a nonvicinal bond–antibond effect, which arises when the side of a ^σCH bond orbital in an eclipsed methyl group comes into favorable overlap with the “backside” lobe of the coplanar σ antibond in the staggered–eclipsed geometry. A smaller nonadditive interaction of each methyl rotor with the central group is noted to be of importance when the central atom contains lone pairs. Aspects of this qualitative picture, and its dependence on geometry changes, are tested in applications to (CH₃)₂CHF, (CH₃)₂NH, (CH₃)₂O, (CH₃)₂C?CH₂, (CH₃)₂C?O, and C(CH₃)₄.     

Synthesis of polyacetals with various main‐chain structures by the self‐polyaddition of vinyl ethers with a hydroxyl function

To establish the optimum conditions for obtaining high molecular weight polyacetals by the self‐polyaddition of vinyl ethers with a hydroxyl group, we performed the polymerization of 4‐hydroxybutyl vinyl ether (CH₂?CH? O? CH₂CH₂CH₂CH₂? OH) with various acidic catalysts [p‐toluene sulfonic acid monohydrate, p‐toluene sulfonic anhydride (TSAA), pyridinium p‐toluene sulfonate, HCl, and BF₃OEt₂] in different solvents (tetrahydrofuran and toluene) at 0 °C. All the polymerizations proceeded exclusively via the polyaddition mechanism to give polyacetals of the structure [? CH(CH₃)? O? CH₂CH₂CH₂CH₂? O? ]_n quantitatively. The reaction with TSAA in tetrahydrofuran led to the highest molecular weight polymers (number‐average molecular weight = 110,000, weight‐average molecular weight/number‐average molecular weight = 1.59). 2‐Hydroxyethyl vinyl ether, diethylene glycol monovinyl ether, cyclohexane dimethanol monovinyl ether, and tricyclodecane dimethanol monovinyl ether were also employed as monomers, and polyacetals with various main‐chain structures were obtained. This structural variety of the main chain changed the glass‐transition temperature of the polyacetals from approximately ?70 °C to room temperature. These polyacetals were thermally stable but exhibited smooth degradation with a treatment of aqueous acid to give the corresponding diol compounds in quantitative yields. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4053–4064, 2002     

A phase transition from monoclinic C2 with Z′ = 1 to triclinic P1 with Z′ = 4 for the quasiracemate l‐2‐aminobutyric acid–d‐methionine (1/1)

Racemates of hydrophobic amino acids with linear side chains are known to undergo a unique series of solid‐state phase transitions that involve sliding of molecular bilayers upon heating or cooling. Recently, this behaviour was shown to extend also to quasiracemates of two different amino acids with opposite handedness [Görbitz & Karen (2015). J. Phys. Chem. B, 119 , 4975–4984]. Previous investigations are here extended to an l ‐2‐aminobutyric acid–d ‐methionine (1/1) co‐crystal, C₄H₉NO₂·C₅H₁₁NO₂S. The significant difference in size between the –CH₂CH₃ and –CH₂CH₂SCH₃ side chains leads to extensive disorder at room temperature, which is essentially resolved after a phase transition at 229 K to an unprecedented triclinic form where all four d ‐methionine molecules in the asymmetric unit have different side‐chain conformations and all three side‐chain rotamers are used for the four partner l ‐2‐aminobutyric acid molecules.     

Reactions of Aromatic S‐ and O‐Enynes with Two Methyl Substituents on the Olefinic Unit Assisted by a Ruthenium Complex: Tandem Cyclization and Product Selectivity

Ruthenium‐assisted cyclizations of two enynes, HC≡CCH(OH)(C₆H₄)X? CH₂CH?CMe₂ (X=S ( 1a ), O ( 1b )), each of which contains two terminal methyl substituents on the olefinic parts, are explored. The reaction of 1a in CH₂Cl₂ gives the vinylidene complex 2a from the first cyclization and two side products, 3a and the carbene complex 4a with a benzothiophene ligand. The same reaction in the presence of HBF₄ affords 4a exclusively. Air oxidation of 4a in the presence of Et₃N readily gives an aldehyde product. In MeOH, tandem cyclizations of 1a generate a mixture of the benzothiochromene compound 10a and the carbene complex 7a also with a benzothiochromene ligand. First, cyclization of 1b likewise proceeds in CH₂Cl₂ to give 2b . Tandem cyclization of 1b in MeOH yields comparable products 10b and 7b with benzochromene moieties, yet with no other side product. The reaction of [Ru]Cl with HC≡CCH(OH)(C₆H₄)S? CH₂CH?CH₂ ( 1c ), which contains no methyl substituent in the olefinic part, in MeOH gives the carbene complex 15c with an unsubstituted thiochromene by means of a C? S bond formation. Structures of 3a and 15c are confirmed by X‐ray diffraction analysis. The presence of methyl groups of enynes 1a and 1b promotes sequential cyclization reactions that involve C? C bond formation through carbocationic species.     

Conformational Analysis of the 1,3‐Oxaphosphorinanes Formed from α,β‐Unsaturated Aldehydes and the (Hydroxymethyl)phosphines RP(CH2OH)2 (R = Ph or CH2OH)

Equimolar reactions of cinnamaldehyde or its 3,5‐dimethoxy‐4‐hydroxy derivative (sinapaldehyde) with RP(CH₂OH)₂ (R = Ph or CH₂OH) were studied in MeOH or CD₃OD at room temperature by NMR spectroscopy. In MeOH, nucleophilic attack of the phosphine at the C?C bond, with concomitant loss of CH₂O, affords the tertiary phosphine HOCH₂P(R)CH(Ar)CH₂CHO ( 3 ) that rapidly converts mainly into a 1,3‐oxaphosphorinane derivative ( 5 ) formed as a mixture of four diastereomers. Conformational analysis reveals that the Ar group in these is exclusively in an equatorial position while the OH and R groups can be equatorial‐oriented or axial‐oriented. In CD₃OD, 1,3‐oxaphosphorinanes monodeuterated in the C5 position are obtained as a mixture of eight diastereomers where the dominate diastereomers have an axial D‐atom. Diastereomeric ratios depend on the nature of the Ar and R groups.     

Synthesis of comb‐type polycarbosilanes via nucleophilic substitution reactions on the main‐chain silicon atoms

A series of comb‐type polycarbosilanes of the type [Si(CH₃)(OR)CH₂]_n {where R = (CH₂)_mR′, R′ = ? O‐p‐biphenyl? X [X = H (m = 3, 6, 8, or 11) or CN (m = 11)], and R′ = (CF₂)₇CF₃ (m = 4)} were prepared from poly(chloromethylsilylenemethylene) by reactions with the respective hydroxy‐terminated side chains in the presence of triethylamine. The product side‐chain polymers were typically greater than 90% substituted and, for R′ = ? O‐p‐biphenyl? X derivatives, they exhibited phase transitions between 27 and 150 °C involving both crystalline and liquid‐crystalline phases. The introduction of the polar p‐CN substituent to the biphenyl mesogen resulted in a substantial increase in both the isotropization temperature and the liquid‐crystalline phase range with respect to the corresponding unsubstituted biphenyl derivative. For R = (CH₂)₁₁? O‐biphenyl side chains, an analogous side‐chain liquid‐crystalline (SCLC) polysiloxane derivative of the type [Si(CH₃)(O(CH₂)₁₁? O‐biphenyl)O]_n was prepared by means of a catalytic dehydrogenation reaction. In contrast to the polycarbosilane bearing the same side chain, this polymer did not exhibit any liquid‐crystalline phases but melted directly from a crystalline phase to an isotropic liquid at 94 °C. Similar behavior was observed for the polycarbosilane with a fluorocarbon chain, for which a single transition from a crystalline phase to an isotropic liquid was observed at ?0.7 °C. The molecular structures of these polymers were characterized by means of gel permeation chromatography and high‐resolution NMR studies, and the crystalline and liquid‐crystalline phases of the SCLC polymers were identified by differential scanning calorimetry, polarized optical microscopy, and X‐ray diffraction. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 984–997, 2003     

<Emphasis Type="Italic">N</Emphasis>-allyl and <Emphasis Type="Italic">N</Emphasis>-propargyl trifluoromethanesulfonimides. Theoretical analysis

Tautomers of N-allyl- and N-propargyl-substituted trifluoromethanesulfonimides (CF₃SO₂)₂NR (R = CH₂CH=CH₂, Z/E-CH=CHMe, CH₂C≡CH, CH=CH=CH₂, C≡CCH₂) were calculated by the DFT (B3LYP, wB97XD, PBE1PBE), MP2, and CBS-QB3 methods. The results were compared with the theoretical data for the corresponding amines and amides NHRR¹ (R¹ = H, CF₃SO₂). It was shown that there is no conjugation between the nitrogen atom and C=C bond and that conjugation exists with the C≡C bond with electron density displacement toward the nitrogen atom. The calculations of anions derived from N-allyl- and N-propargyl-trifluoromethanesulfonimides revealed the possibility of their rearrangement with elimination of trifluoromethanesulfinate anion and formation of its H-complex with N-(prop-2-en-1-ylidene)trifluoromethanesulfonamide or N-(prop-2-yn-1-ylidene)trifluoromethanesulfonamide.