Polymeric μ‐cyano‐di­cyano­nickelate(II)‐μ‐cyano‐trans‐bis­[N‐(2‐hydroxyethyl)ethyl­enedi­amine]­cadmium(II)

The title compound, catena‐poly­[[μ‐cyano‐1:2κ²C:N‐di­cyano‐1κ²C‐trans‐bis­[N‐(2‐hydroxy­ethyl)­ethane‐1,2‐di­amine‐2κ²N,N′]­cadmium(II)­nickel(II)]‐μ‐cyano‐1:2′κ²C:N], [CdNi(CN)₄(C₄H₁₂N₂O)₂], consists of alternating square‐planar Ni(CN)₄ fragments, formally dianionic, and Cd(hydet‐en)₂ moieties [hydet‐en is N‐(2‐hydroxy­ethyl)­ethyl­ene­di­amine], with the two bridging cyanide ligands in a mutually trans disposition at the Ni atom and cis at the Cd atom. The resulting one‐dimensional zigzag chain structure has the Ni atom on an inversion center, while the distorted octahedron centered on the Cd atom lies on a twofold axis. The polymer chains are connected into undulating sheets by weak interchain N—H⋯N, N—H⋯O and O—H⋯N hydrogen bonds, which are also present between successive sheets.     

Intramolecular cyclization of 4,7‐bis(2‐bromo­acetyl)‐1‐thia‐4,7‐di­azacyclo­nonane

The reaction of 1‐thia‐4,7‐di­azacyclo­nonane with bromo­acetyl bromide in CHCl₃ affords the unexpected salt 4‐(2‐bromo­acetyl)‐8‐oxo‐1‐thionia‐4,7‐di­aza­bi­cyclo­[5.2.2]­un­decane bromide, C₁₀H₁₆BrN₂O₂S⁺·Br⁻. Two units of the salt are linked by S⋯Br contacts about a crystallographic inversion centre, thus forming dimers that are linked by Br⋯Br contacts into extended ribbons. S⋯O contacts between these ribbons generate a two‐dimensional sheet.     

catena‐Poly­[[(di‐2‐pyridyl­amine)­silver(I)]‐μ‐nicotinato] and catena‐poly­[[(di‐2‐pyridyl­amine)silver(I)]‐μ‐2,6‐di­hydroxy­benzoato]

In catena‐poly­[[(di‐2‐pyridyl­amine‐κ²N,N′)silver(I)]‐μ‐nico­tinato‐κ²N:O], [Ag(C₆H₄NO₂)(C₁₀H₉N₃)]_n, the Ag^I atom is tetracoordinated by two N atoms from the di‐2‐pyridyl­amine (BPA) ligand [Ag—N = 2.3785 (18) and 2.3298 (18) Å] and by one N atom and one carboxyl­ate O atom from nicotinate ligands [Ag—N = 2.2827 (15) Å and Ag—O = 2.3636 (14) Å]. Bridging by nicotinate N and O atoms generates a polymeric chain structure, which extends along [100]. The carboxyl O atom not bonded to the Ag atom takes part in an intrachain C—H⋯O hydrogen bond, further stabilizing the chain. Pairs of chains are linked by N—H⋯O hydrogen bonds to generate ribbons. There are no π–π interactions in this complex. In catena‐poly­[[(di‐2‐pyridyl­amine‐κ²N,N′)silver(I)]‐μ‐2,6‐di­hydroxy­benzoato‐κ²O¹:O²], [Ag(C₇H₅O₄)(C₁₀H₉N₃)]_n, the Ag^I atom has a distorted tetrahedral coordination, with three strong bonds to two pyridine N atoms from the BPA ligand [Ag—N = 2.286 (5) and 2.320 (5) Å] and to one carboxyl­ate O atom from the 2,6‐di­hydroxy­benzoate ligand [Ag—O = 2.222 (4) Å]; the fourth, weaker, Ag‐atom coordination is to one of the phenol O atoms [Ag⋯O = 2.703 (4) Å] of an adjacent moiety, and this interaction generates a polymeric chain along [100]. Pairs of chains are linked about inversion centers by N—H⋯O hydrogen bonds to form ribbons, within which there are π–π interactions. The ribbons are linked about inversion centers by pairs of C—H⋯O hydrogen bonds and additional π–π interactions between inversion‐related pairs of 2,6‐di­hydroxy­benzoate ligands to generate a three‐dimensional network.     

{3,3′‐[2,2′‐(Ethylenedioxy)dibenzyl­idene]bis(S‐methyl dithiocarbazate)}­nickel(II)

The tetradentate N₂S₂ Schiff base ligand 3,3′‐[2,2′‐(ethyl­ene­di­oxy)di­benzyl­idene]­bis­(S‐methyl di­thio­car­ba­zate) (H₂L), prepared by the condensation of S‐methyl di­thio­carb­aza­te with 1,4‐bis(2‐formyl­phenyl)‐1,4‐dioxa­butane in a 1:2 molar ratio, reacts with nickel acetate to form the title neutral metal complex, [Ni(C₂₀H₂₀N₄O₂S₄)]. The X‐ray structure of the complex shows a distorted square‐planar geometry around the Ni atom. The monomeric units are weakly associated into dimers via a long Ni?S interaction [3.569 (1) Å]. These dimeric units are then linked by C—H?S intermolecular contacts to form a polymeric chain along the a axis.     

cis‐[1,4‐Bis(di­phenyl­phosphino)­butane](μ‐tetra­thio­tungstato)­palladium(II) N,N′‐di­methyl­form­amide hemisolvate hemihydrate

In the title compound, [1,4‐bis(di­phenyl­phosphino)­butane‐2κ²P,P′]­di‐μ‐thio‐1:2κ⁴S‐di­thio‐1κ²S‐palladium(II)­tung­sten(VI) N,N′‐di­methyl­form­amide hemisolvate hemihydrate, [PdWS₄­(C₂₈H₂₈P₂)]·0.5C₃H₇NO·0.5H₂O, the Pd atom is coordinated by two S atoms from the distorted‐tetrahedral [WS₄]²⁻ anion and two P atoms from the dppb mol­ecule [dppb is 1,4‐bis(di­phenyl­phos­phino)­butane] in an approximately square‐planar configuration. A puckered seven‐membered ring is formed by the Pd atom and the dppb ligand.     

The new thioantimonate(V) (C3H10N)[NiSbS4(C6H18N4)]

Turquoise crystals of the title salt, propyl­ammonium di‐μ‐thio‐1:2κ⁴S‐di­thio‐2κ²S‐tris(2‐amino­ethyl)­amine‐1κ⁴N‐anti­mony(V)­nickel(II), (C₃H₁₀N)[NiSbS₄(C₆H₁₈N₄)] or [PAH][Ni(tren)SbS₄] [where tren is tris(2‐amino­ethyl)­amine and PA is propyl­amine], were synthesized under solvothermal conditions by reacting [Ni(tren)₂]Cl₂, Sb and S in a solution of PA. The Ni^II ion is octahedrally surrounded by four N atoms of the tetradentate tren mol­ecule and by two S atoms of the tetrahedral [Sb^VS₄]^3? anion, thus forming the anionic [Ni(tren)SbS₄]^? part of the compound. Charge balance is achieved through the PAH⁺ cation. An extended intermolecular hydrogen‐bonding network is observed between the anion and the cation.     

4,4′‐Thio­dipyridinium tetra­chloro­copper(II)

The title compound, (C₁₀H₁₀N₂S)[CuCl₄], was obtained by the reaction of cupric chloride with pyridine‐4‐thiol in a mixture of aceto­nitrile and tetra­hydro­furan, suggesting that the desulfurization and coupling reactions of pyridine‐4‐thiol occurred in the presence of the Cu²⁺ ion. X‐ray diffraction analysis reveals the presence of one 4,4′‐thio­dipyridinium cation, H₂bps²⁺, and one [CuCl₄]²⁻ anion. The cations interact with the anions via N—H⋯Cl hydrogen‐bonding interactions to form a closed `chair' conformation.     

4,5‐Bis(furoylsulfanyl)‐1,3‐dithiole‐2‐thione

The title compound, C₁₃H₆O₄S₅, possesses crystallographically imposed mirror symmetry, with the atoms of the C=S group lying on the mirror plane. It is an example of the general formula [RCO]₂(dmit), where R is a furan ring and dmit is 2‐thioxo‐1,3‐dithiole‐4,5‐dithiol­ate. The components exhibit some polarization of their mol­ecular–electronic structure. The dmit and furan moieties exhibit a high degree of conjugation, as the introduction of C=O connecting the conjugated furan (donor) and dmit (acceptor) rings forms a good conjugated system with high delocalization. A polar three‐dimensional framework is built from a combination of inter­molecular contacts, namely S⋯S inter­actions and C—H⋯O hydrogen bonding. The structural characteristics lead to good second‐order non‐linear optical properties.     

Ten‐vertex rhodadithiaborane ­chemistry: [8‐{I(CH2)5}‐3‐(η5‐C5Me5)‐arachno‐3,7,8‐RhS2B8H9]

Neutral 8‐(5‐iodo‐n‐pentyl)‐3‐(η⁵‐penta­methyl­cyclo­pentadi­enyl)‐arachno‐3‐rhoda‐7,8‐di­thia­undecaborane, [Rh(C₅H₁₉B₈­IS₂)­(C₁₀H₁₅)], obtained from the [arachno‐7,8‐S₂B₉H₁₀]^? anion by treatment with I(CH₂)₅I followed by [Rh(C₅Me₅)Cl₂]₂ and N,N,N′,N′‐tetra­methyl‐1,8‐di­amino­naphthalene, has the 11‐vertex cluster geometry of [arachno‐7,8‐S₂B₉H₁₀]^?, but with an {Rh(C₅Me₅)} unit in the 3‐position instead of a {BH} unit, and with a –(CH₂)₅I chain attached exo to an S atom.     

Bis(1,10‐phenanthroline)(thio­sulfato)­manganese(II) methanol solvate and catena‐poly­[[di­aqua(2,9‐di­methyl‐1,10‐phenanthroline)­manganese(II)]‐μ‐thio­sulfato]

The structure of bis(1,10‐phenanthroline‐κ²N,N′)(thio­sulfato‐κ²O:S)­manganese(II) methanol solvate, [Mn(S₂O₃)(C₁₂H₈N₂)₂]·CH₃OH, is made up of Mn²⁺ centers coordinated to two bidentate phenanthroline (phen) groups and an S,O‐chelating thio­sulfate anion, forming monomeric entities. The structure of catena‐poly­[[di­aqua(2,9‐di­methyl‐1,10‐phen­anthro­line‐κ²N,N′)­manganese(II)]‐μ‐thio­sulfato‐κ²O:S], [Mn(S₂O₃)(C₁₄H₁₂N₂)(H₂O)₂]_n, is polymeric, consisting of Mn(dmph)(H₂O)₂ units (dmph is 2,9‐di­methyl‐1,10‐phenanthroline) linked by thio­sulfate anions acting in an S,O‐chelating manner.     

Bis(μ‐cyst­amine‐κ4N,S:S′,N′)­bis­[(2‐amino­ethane­thiol­ato‐κ2N,S)­iridium(III)] tetrabromide dihydrate

In the complex cation of the title compound, [Ir₂(C₂H₆NS)₂(C₄H₁₂N₂S₂)₂]Br₄·2H₂O, which was obtained by rearrangement of [Re{Ir(aet)₃}₂]³⁺ (aet is 2‐amino­ethane­thiol­ate) in an aqueous solution, two approximately octahedral fac(S)‐[Ir(NH₂CH₂CH₂S)₃] units are linked by two coordinated di­sulfide bonds. The complex cation has a twofold axis, and the two non‐bridging thiol­ate S atoms in the complex are located on opposite sides of the two di­sulfide bonds. Considering the absolute configurations of the two octahedral units (Δ and Λ) and the four asymmetric di­sulfide S atoms (R and S), the complex consists of the Δ_RRΔ_RR and Λ_SSΛ_SS isomers, which combine to form the racemic compound.     

N,N′‐Bis(2‐methoxy­benzyl­idene) adducts of ethane‐1,2‐di­amine,propane‐1,3‐di­amine and butane‐1,4‐di­amine

We have isolated and crystallographically characterized the three homologous compounds N,N′‐bis(2‐methoxy­benzyl­idene)­ethane‐1,2‐di­amine (MeSalen), C₁₈H₂₀N₂O₂, N,N′‐bis(2‐methoxy­benzyl­idene)­propane‐1,3‐di­amine (MeSalpr), C₁₉H₂₂N₂O₂, and N,N′‐bis(2‐methoxy­benzyl­idene)­butane‐1,4‐di­amine (MeSalbu), C₂₀H₂₄N₂O₂. In contrast with MeSalpr, the mol­ecules of MeSalen and MeSalbu, which have an even number of methyl­ene units, have crystallographic symmetry. Comparing these methoxy‐substituted species with their hydroxy equivalents shows that the aryl rings rotate upon removal of the O—H⋯N hydrogen bonds. The packing of MeSalen and MeSalpr is controlled by C—H⋯π interactions, whereas that of MeSalbu has only van der Waals contacts.     

4,5‐Propyl­enedi­thio‐1,3‐di­thiole‐2‐thione and 4,5‐propyl­enedi­thio‐1,3‐di­thiol‐2‐one

4,5‐Propyl­ene­di­thio‐1,3‐di­thiole‐2‐thione, C₆H₆S₅, (I), crystallizes in the centrosymmetric space group P2₁/c. The molecular packing is characterized by pairs of S⋯S intermolecular contacts between neighbouring mol­ecules, which may account for the rather high thermal stablity of the crystal. 4,5‐Propyl­ene­di­thio‐1,3‐di­thiol‐2‐one, C₆H₆OS₄, (II), in which an O atom replaces the terminal S atom of (I), crystallizes in the non‐centrosymmetric polar space group Cc. The packing pattern of (II) indicates that the macropolarization direction is along [101]. Although the packing patterns are qualitatively significantly different, the molecular structures of (I) and (II) are similar, each exhibiting a chair conformation.     

1,4‐Di­methyl­pyridinium hexakis­(di­methyl­form­amide‐κO)­calcium(II) dodecamolybdophosphate

In the title compound, (C₇H₁₀N)[Ca(C₃H₇NO)₆][PMo₁₂O₄₀], two types of cations {viz. 1,4‐di­methyl­pyridinium and a [Ca(DMF)₆]²⁺ complex cation (DMF is di­methyl­form­amide)} and dodecamolybdophosphate (tetra­conta­oxo­phos­phido­dodeca­molybdate) anions form an infinite three‐dimensional assembly via electrostatic forces.     

[Bis­(di­phenyl­phosphino)­alkane](pentane‐2,4‐di­thionato) complexes of nickel(II)

The structures of a series of four‐coordinate nickel(II) complexes of the form [Ni(sacsac)L] PF₆ (sacsac = pentane‐2,4‐di­thione anion; L = (Ph₂P)₂(CH₂)_n, n = 1,2,3) have beendetermined. These are [bis­(di­phenyl­phosphino)­methane](pentane‐2,4‐di­thionato‐S,S′)­nickel(II) hexa­fluoro­phosphate, [Ni(C₂₅H₂₂P₂)(C₅H₇S₂)]PF₆, [1,2‐bis­(di­phenylphosphino)­ethane](pentane‐2,4‐di­thionato–S,S′)­nickel(II) hexa­fluoro­phosphate, [Ni(C₂₆H₂₄P₂)(C₅H₇S₂)]PF₆, and [1,3‐bis­(di­phenyl­phosphino)­propane](pentane‐2,4‐di­thionato‐S,S′)­nickel(II) hexa­fluoro­phosphate, [Ni(C₂₇H₂₆P₂)(C₅H₇S₂)]PF₆. All have a distorted square‐planar arrangement about Ni with angles around Ni varying with the length of the hydro­carbon chain.     

2,3‐Bis(2‐methyl­phenyl­imino)‐1,4‐di­thia­cyclo­hexane

An N,N′‐disubstituted di­thio­ox­amide derivative reacts with 1,2‐di­bromo­ethane to produce the title compound, C₁₈H₁₈N₂S₂, a heterocycle with a double Schiff base. In the crystal structure, the mol­ecule of the title compound lies on a twofold axis. Weak C—H⋯π interactions are the principal intermolecular forces, mediating the formation of layers parallel to the ab plane. Each mol­ecule participates as donor and acceptor in two such contacts.     

catena‐Poly­[[trans‐bis­(ethane‐1,2‐di­amine‐κ2N,N′)copper(II)]‐μ‐di­thion­ato‐κ2O:O′] and trans‐di­aqua­bis­(propane‐1,3‐di­amine‐κ2N,N′)copper(II) di­thionate

In title an­hydro­us catena‐poly­[[trans‐bis­(ethane‐1,2‐di­amine‐κ²N,N′)copper(II)]‐μ‐di­thionato‐κ²O:O′], [Cu(S₂O₆)(C₂H₈N₂)₂]_n or [{H₂N(CH₂)₂NH₂}₂Cu(O·O₂SSO₂·O)]_∞, successive Cu atoms are bridged by a single doubly charged di­thionate group, forming a one‐dimensional polymer with inversion centres at the metal atoms and the mid‐point of the S—S bond [Cu—O = 2.5744 (15) Å]. In title (hydrated) trans‐di­aqua­bis­(propane‐1,3‐di­amine‐κ²N,N′)copper(II) di­thionate, [Cu(C₃H₁₀N₂)₂(H₂O)₂](S₂O₆) or [{H₂N(CH₂)₃NH₂}₂Cu(OH₂)₂](S₂O₆), both ions have imposed 2/m symmetry. The `axial' anion components are displaced by a pair of water ligands [Cu—O = 2.439 (3) Å], the shorter Cu—O distance being compensated by the lengthened Cu—N distance [2.0443 (18), cf. 2.0100 (13) and 2.0122 (16) Å].     

A one‐dimensional ladder‐like coordination polymer derived from chains formed via hydrogen bonds: catena‐poly­[[aqua­di­pyridine­nickel(II)]‐μ‐2,2′‐di­thio­dibenzoato‐κ3O,O′:O′′]

The title one‐dimensional chain nickel(II)–di­sulfide complex, [Ni(C₁₄H₈O₄S₂)(C₅H₅N)₂(H₂O)]_n, has each Ni^II cation coordinated by two N atoms from two pyridine ligands, three carboxyl­ate O atoms from two different di­thio­dibenzoate ligands and one O atom from a coordinated water mol­ecule, in a distorted octahedral coordination geometry. Each di­thio­dibenzoate ion links two Ni^II cations through its carboxyl­ate O atoms, making the structure polymeric. Hydro­gen‐bond interactions between two shoulder‐to‐shoulder chains lead to the formation of a ladder‐like structure.     

Two 2,5‐bis(2‐pyridinyl)‐1,3,4‐oxa­diazo­le–metal complexes (M = Cu and Ni)

The reaction of the diazine ligand 3,5‐bis(2‐pyridinyl)‐1,3,4‐oxa­diazole (pod, C₁₂H₈N₄O), with Cu(CF₃SO₃)₂ or Ni(ClO₄)₂ afforded the title complexes di­aqua­bis­[3,5‐bis(2‐pyridinyl)‐1,3,4‐oxa­diazole‐N²,N³]copper(II) bis­(tri­fluoro­methane­sul­fon­ate), [Cu(pod)₂(H₂O)₂](CF₃SO₃)₂, and di­aqua­bis­[3,5‐bis(2‐pyridinyl)‐1,3,4‐oxa­diazo­le‐N²,N³]­nickel(II) diperchlorate, [Ni(pod)₂(H₂O)₂](ClO₄)₂. Both complexes present a crystallographically centrosymmetric mononuclear cation structure which consists of a six‐coordinated Cu^II or Ni^II ion with two pod mol­ecules acting as bidentate ligands and two axially coordinated water mol­ecules.     

A host–guest complex of di­aqua­bis­[1‐hydroxy‐2(1H)‐pyridine­thionato‐O,S]­magnesium(II) and 2,2′‐di­thio­bis­(pyridine N‐oxide)

The title compound, [Mg(C₅H₄NOS)₂(H₂O)₂]·C₁₀H₈N₂O₂S₂, is a two‐component host–guest material. The 2,2′‐di­thio­bis(pyridine N‐oxide) molecule has crystallographic twofold symmetry. The metal complex lies on an inversion centre and associates via C—H?S interactions into chains which thread the 2,2′‐di­thio­bis­(pyridine N‐oxide) lattice in perpendicular directions. Hydro­gen bonds exist between the water mol­ecules of the di­aqua­magnesium units and the N—O groups of the host lattice.