D2 layers on MgO(0 0 1): Simulation study

In response to recent helium atom scattering (HAS) and neutron scattering results, Monte Carlo simulations and perturbation theory calculations have been performed for D₂ on MgO(0 0 1). Monte Carlo simulations predict that D₂ molecules form a series of interesting structures, p(2 × 2) → p(4 × 2) → p(6 × 2), with coverages Θ = 0.5, 0.75, 0.83 respectively, and followed by a formation of a top layer of p(6 × 2) unit cell symmetry. The three types of mono-layers are stable up to 13 K, whereas the top layer still exists up to 10 K. This is in partial agreement with the neutron scattering and HAS results that report c(2 × 2), c(4 × 2) and c(6 × 2); they agree in terms of coverage and stability, but disagree in terms of symmetry. A quantum mechanical examination of the D₂ molecules’ rotational motion shows the molecular axes are azimuthally delocalized and hence the simulated structures are c-type rather than p-type. These calculations also indicate that ortho-D₂ and helicoptering para-D₂ prefer cationic sites, while cartwheeling para-D₂ prefers anionic sites.     

Oxygen-induced p(3 × 1) reconstruction of the W(1 0 0) surface

The oxidation of the W(1 0 0) surface at elevated temperatures has been studied using room temperature STM and LEED. High exposure of the clean surface to O₂ at 1500 K followed by flash-annealing to 2300 K in UHV results in the formation of a novel p(3 × 1) reconstruction, which is imaged by STM as a missing-row structure on the surface. Upon further annealing in UHV, this surface develops a floreted LEED pattern characteristic of twinned microdomains of monoclinic WO_x, while maintaining the p(3 × 1) missing-row structure. Atomically resolved STM images of this surface show a complex domain structure with single and double W〈0 1 0〉 rows coexisting on the surface in different domains.     

The bΣ(b0) → XΣ(X10,X21) and aΔ(a2) → X21 transitions of AsBr

Emission spectra of the b¹Σ⁺(b0⁺) → X³Σ⁻(X₁0⁺,X₂1) and a¹Δ(a2) → X₂1 transitions of AsBr have been measured in the near-infrared spectral region with a Fourier-transform spectrometer. The arsenic bromide radicals were generated in fast-flow systems by reaction of arsenic vapor (As_x) with bromine and were excited by microwave-discharged oxygen. The most prominent features in the spectrum are the Δv = +1,0,−1, and −2 band sequences of the b¹Σ⁺(b0⁺) → X³Σ⁻(X₁0⁺) transition in the range 11 700-12 700 cm⁻¹. With lower intensities, the Δv = 0 and −1 sequences of the b¹Σ⁺(b0⁺) → X³Σ⁻(X₂1) sub-system show up in the same range. Further to the red, between 6000 and 6700 cm⁻¹, the Δv = 0, +1, and −1 sequences of the hitherto unknown a¹Δ(a2) → X₂1 transition are observed. Analyses of medium- and high-resolution spectra have yielded improved molecular constants for the X₁0⁺, X₂1, and b0⁺ states and first values of the electronic energy and the vibrational constants of the a2 state.     

SrTiO3(0 0 1) reconstructions: the (2 × 2) to c(4 × 4) transition

Scanning tunneling microscopy (STM) is used to investigate the (0 0 1) surface structure of Nb doped SrTiO₃ single crystals annealed in ultra high vacuum (UHV). Atomically resolved images of the (2 × 2) reconstructed surface are obtained after annealing a chemically etched sample. With further annealing dotted row domains appear, which coexist with the (2 × 2) reconstruction. The expansion of these domains with further annealing gives rise to the formation of a TiO₂ enriched c(4 × 4) reconstruction.     

Initial stages of the autocatalytic oxidation of the InAs(0 0 1)-(4 × 2)/c(8 × 2) surface by molecular oxygen

The initial stages of oxidation of the In-rich InAs(0 0 1)-(4 × 2)/c(8 × 2) surface by molecular oxygen (O₂) were studied using scanning tunneling microscopy (STM) and density functional theory (DFT). It was shown that the O₂ dissociatively chemisorbs along the rows in the [1 1 0] direction on the InAs surface either by displacing the row-edge As atoms or by inserting between In atoms on the rows. The dissociative chemisorption is consistent with being autocatalytic: there is a high tendency to form oxygen chemisorption sites which grow in length along the rows in the [1 1 0] direction at preexisting oxygen chemisorption sites. The most common site size is about 21-24 Å in length at ∼25% ML coverage, representing 2-3 unit cell lengths in the [1 1 0] direction (the length of ∼5-6 In atoms on the row). The autocatalysis was confirmed by modeling the site distribution as non-Poisson. The autocatalysis and the low sticking probability (∼10⁻⁴) of O₂ on the InAs(0 0 1)-(4 × 2)/c(8 × 2) are consistent with activated dissociative chemisorption. The results show that is it critical to protect the InAs surface from oxygen during subsequent atomic layer deposition (ALD) or molecular beam epitaxy (MBE) oxide growth since oxygen will displace As atoms.     

Illumination dependence of I-V and C-V characterization of Au/InSb/InP(1 0 0) Schottky structure

The effects of surface preparation and illumination on electric parameters of Au/InSb/InP(100) Schottky diode were investigated, in the later diode InSb forms a fine restructuration layer allowing to block In atoms migration to surface. In order to study the electric characteristics under illumination, we make use of an He-Ne laser of 1 mW power and 632.8 nm wavelength. The current-voltage I(V_G), the capacitance-voltage C(V_G) measurements were plotted and analysed. The saturation current I_s, the serial resistance R_s and the mean ideality factor n are, respectively, equal to 2.03 × 10⁻⁵ A, 85 Ω, 1.7 under dark and to 3.97 × 10⁻⁵ A, 67 Ω, 1.59 under illumination. The analysis of I(V_G) and C(V_G) characteristics allows us to determine the mean interfacial state density N_ss and the transmission coefficient θ_n equal, respectively, to 4.33 × 10¹² eV⁻¹ cm⁻², 4.08 × 10⁻³ under dark and 3.79 × 10¹² eV⁻¹ cm⁻² and 5.65 × 10⁻³ under illumination. The deep discrete donor levels presence in the semiconductor bulk under dark and under illumination are responsible for the non-linearity of the C⁻²(V_G) characteristic.     

High resolution scanning tunneling spectroscopy of ultrathin Pb on Si(1 1 1)-(6 × 6) substrate

The electronic structure of Si(1 1 1)-(6 × 6)Au surface covered with submonolayer amount of Pb is investigated using scanning tunneling spectroscopy. Already in small islands of Pb with thickness of 1 ML Pb_(1 1 1) and with the diameter of only about 2 nm we detected the quantized electronic state with energy 0.55 eV below the Fermi level. Similarly, the I(V) characteristics made for the Si(1 1 1)-(6 × 6)Au surface reveal a localized energy state 0.3 eV below the Fermi level. These energies result from fitting of the theoretical curves to the experimental data. The calculations are based on tight binding Hubbard model. The theoretical calculations clearly show prominent modification of the I(V) curve due to variation of electronic and topographic properties of the STM tip apex.     

Analysis of the first triad of interacting states (0 2 0), (1 0 0), and (0 0 1) of D2O from hot emission spectra

The far-infrared and middle-infrared emission spectra of deuterated water vapour were measured at temperatures 1370, 1520, and 1940 K in the ranges 320-860 and 1750-3400 cm⁻¹. The measurements were performed in an alumina cell with an effective length of hot gas of about 50 cm. More than 3550 new measured lines for the D₂¹⁶O molecule corresponding to transitions from highly excited rotational levels of the (0 2 0), (1 0 0), and (0 0 1) vibrational states are reported. These new lines correspond to rotational states with higher values of the rotational quantum numbers compared to previously published determinations: J_max = 29 and K_a(max) = 22 for the (0 2 0) state, J_max = 29 and K_a(max) = 25 for the (1 0 0) state, and J_max = 30 and K_a(max) = 23 for the (0 0 1) state. The extended set of 1987 experimental rotational energy levels for the (0 2 0), (1 0 0), and (0 0 1) vibration states including all previously available data has been determined. For the data reduction we used the generating function model. The root mean square (RMS) deviation between observed and calculated values is 0.004 cm⁻¹ for 1952 rovibrational levels of all three vibration states. A comparison of the observed energy levels with the best available values from the literature and with the global predictions from molecular electronic potential energy surfaces of water isotopic species [H. Partridge, D.W. Schwenke, J. Chem. Phys. 106 (1997) 4618] is discussed. The latter confirms a good consistency of mass-dependent DBOC corrections in the PS potential function with new experimental rovibrational data.     

Soft X-ray appearance potential spectroscopy (SXAPS) study of TiO2(1 1 0)-1 × 2 and (0 0 1)-1 × 1 surfaces

A soft X-ray appearance potential spectroscopy (SXAPS) apparatus with high sensitivity was built to measure non-derivative spectra. SXAPS spectra (non-derivative) of Ti 2p and O 1s for TiO₂(1 1 0)-1 × 2 and (0 0 1)-1 × 1 surfaces have been measured using low incident currents (about 10 μA/cm²) and a photon counting mode. Density of empty states on Ti and O sites are deduced by self-deconvoluting the spectra. The self-deconvoluted SXAPS spectra are qualitatively similar to those measured by X-ray absorption spectroscopy (XAS). The Ti 2p_3/2 spectrum shows two strong peaks which correspond to t_2g and e_g states. For the O 1s spectrum two strong peaks near the threshold are also found which can be ascribed to O 2pπ and O 2pσ states. These results suggest that the spectra almost obey the dipole selection rule, so-called the “approximate dipole selection rule”. The SXAPS spectra of Ti 2p and O 1s for the (1 1 0) and (0 0 1) surfaces resemble qualitatively, which is consistent with the XAS results. The spectra measured on the (1 1 0)-1 × 2 surface at an incident angle of 45° off normal to the surface and on the (1 1 0) surface sputtered by Ar ions indicate that SXAPS is very sensitive to the surface electronic states.     

The CuGaSe2(0 0 1) surface: A (4 × 1) reconstruction

We report on the formation of a stable (4 × 1) reconstruction of the chalcopyrite CuGaSe₂(0 0 1) surface. Using Ar⁺ ion-bombardment and annealing of epitaxial CuGaSe₂ films grown on GaAs(0 0 1) substrates it was possible to obtain flat, well-ordered surfaces showing a clear (4 × 1) reconstruction. The cleanliness and structure were analyzed in situ by AES and LEED. AES data suggest a slight Se-enrichment and Cu-depletion upon surface preparation. Our results demonstrate that (0 0 1) surfaces of the Cu-III-VI₂(0 0 1) material can show stable, unfacetted surfaces.     

A Monte Carlo simulation study of H2 layers on NaCl(0 0 1)

Monte Carlo simulations show that, at one monolayer coverage, H₂ molecules adsorbed on a NaCl(0 0 1) surface occupy all Na⁺ sites and form a commensurate c(2 × 2) structure. If the Cl⁻ sites are occupied as well, a bi-layer p(2 × 1) structure forms. An examination of the H₂ molecules’ rotational motion shows the molecular axes are azimuthally delocalized and so both of the structures acquire (1 × 1) symmetry in accord with experimental observations. These calculations also show that helicoptering o-H₂ (J = 1, m = ±1) prefer to sit on top of Na⁺ sites, while cartwheeling o-H₂ (J = 1, m = 0) prefers to locate over Cl⁻ sites, in agreement with other work.     

Infrared reflection absorption study of carbon monoxide adsorption on Cu(1 0 0)-c(2 × 2)-Pd surfaces formed by palladium vacuum-depositions at various temperatures

Using infrared reflection absorption spectroscopy (IRRAS) and temperature programmed desorption (TPD), we investigated carbon monoxide (CO) adsorption and desorption behaviors on atomic checkerboard structures of Cu and Pd formed by Pd vacuum deposition at various temperatures of Cu(1 0 0). The 0.15-nm-thick Pd deposition onto a clean Cu(1 0 0) surface at room temperature (RT) showed a clear c(2 × 2) low-energy electron diffraction (LEED) pattern, i.e. Cu(1 0 0)-c(2 × 2)-Pd. The RT-CO exposure to the c(2 × 2) surfaces resulted in IRRAS absorption caused by CO adsorbed on the on-top sites of Pd. The LEED patterns of the Pd-deposited Cu(1 0 0) at higher substrate temperatures revealed less-contrasted c(2 × 2) patterns. The IRRAS intensities of the linearly bonded CO bands on 373-K-, 473-K-, and 673-K-deposited c(2 × 2) surfaces are, respectively, 25%, 22%, and 10% less intense than those on the RT-deposited surface, indicating that Pd coverages at the outermost c(2 × 2) surfaces decrease with increasing deposition temperature. In the initial stage of the 90-K-CO exposure to the RT surface, the band attributable to CO bonded to the Pd emerged at 2067 cm⁻¹ and shifted to higher frequencies with increasing CO exposure. At saturation coverage, the band was located at 2093 cm⁻¹. In contrast, two distinct bands around 2090 cm⁻¹ were apparent on the spectrum of the 473-K-deposited surface: the CO saturation spectrum was dominated by an apparent single absorption at 2090 cm⁻¹ for the 673-K-deposited surface. The TPD spectra of the surfaces showed peaks at around 200 and 300 K, which were ascribable respectively to Cu-CO and Pd-CO. Taking into account the TPD and IRRAS results, we discuss the adsorption-desorption behaviors of CO on the ordered checkerboard structures.     

Electron surface states in short-period superlattices: (GaAs)2/(AlAs)2(1 0 0)-c(4 × 4)

The electronic structure of (GaAs)₂/(AlAs)₂(1 0 0)-c(4 × 4) superlattice surfaces was studied by means of angular-resolved photoelectron spectroscopy (ARUPS) in the photon energy range 20-38 eV. Four samples with different surface termination layers were grown and As-capped by molecular beam epitaxy (MBE). ARUPS measurements were performed on decapped samples with perfect c(4 × 4) reconstructed surfaces. An intensive surface state was, for the first time, observed below the top of the valence band. This surface state was found to shift with superlattices’ different surface termination in agreement with theoretical predictions.     

Study of c(2 × 2)-MnAu(0 0 1) layers on Mn(0 0 1) by means of scanning tunneling microscopy/spectroscopy

Intermixing, growth, geometric and electronic structures of gold films grown on antiferromagnetic stacking body-centered-tetragonal manganese (0 0 1) films were studied by means of scanning tunneling microscopy/spectroscopy at room temperature in ultra-high vacuum. We found stable ordered c(2 × 2)-MnAu(0 0 1) alloy layers after depositing Au on pure Mn layers. Since at the fourth layer (5 × 23)-like Au reconstruction appears instead of the c(2 × 2) structure and local density of states peaks obtained on the c(2 × 2)-MnAu surface disappear, pure Au layers likely grow from the fourth layer.     

Surface phase transition and electronic structure of c(5√2 × √2)R45°-Pb/Cu(1 0 0)

The c(5√2 × √2)R45°-Pb/Cu(1 0 0) surface phase is investigated by means of angle resolved ultraviolet photoemission and low energy electron diffraction in the temperature range between 300 and 550 K. We identify and characterize a temperature-induced surface phase transition at 440 K from the room temperature c(5√2 × √2) R45° phase to a (√2 × √2)R45° structure with split superstructure spots. The phase transition is fully reversible and takes place before the two-dimensional melting of the structure at 520 K. The electronic structure of the split (√2 × √2)R45° phase is characterized by a metallic free-electron like surface band. This surface band is backfolded with c(5√2 × √2)R45° periodicity phase at room temperature, giving rise to a surface band gap at the Fermi energy. We propose that a gain in electronic energy explains in part the stability of the c(5√2 × √2)R45° phase.     

Comparative investigation of the c(2 × 2)-Si/Cu(0 1 1) and (√3 × √3)R30°-Cu2Si/Cu(1 1 1) surface alloys using DFT

The electronic structure of the c(2 × 2)-Si/Cu(0 1 1) surface alloy has been investigated and compared to the structures seen in the three phases of the (√3 × √3)R30°Cu₂Si/Cu(1 1 1) system, using LCAO-DFT. The weighted surface energy increase between the alloyed Cu(0 1 1) and Cu(1 1 1) surfaces is 126.7 meV/Si atom. This increase in energy for the (0 1 1) system when compared to the (1 1 1) system is assigned to the transition from a hexagonal to a rectangular local bonding environment for the Si ion cores, with the hexagonal environment being energetically more favorable. The Si 3s state is shown to interact covalently with the Cu 4s and 4p states whereas the Si 3p state, and to a lesser extent the Si 3d state, forms a mixture of covalent and metallic bonds with the Cu states. The Cu 4s and 4p states are shown to be altered by approximately the same amount by both the removal of Cu ion cores and the inclusion of Si ion cores during the alloying of the Cu(0 1 1) surface. However, the Cu 3d states in the surface and second layers of the alloy are shown to be more significantly altered during the alloying process by the removal of Cu ion cores from the surface layer rather than by the addition of Si ion cores. This is compared to the behavior of the Cu 3d states in the surface and second layers of the each phase of the (√3 × √3)R30°-Cu₂Si/Cu(1 1 1) alloy and consequently the loss of Cu-Cu periodicity during alloying of the Cu(0 1 1) surface is conjectured as the driving force for changes to the Cu 3d states. The accompanying changes to the Cu 4s and 4p states in both the c(2 × 2)-Si/Cu(0 1 1) and (√3 × √3)R30°-Cu₂Si/Cu(1 1 1) alloys are quantified and compared. The study concludes with a brief quantitative study of changes in the bond order of the Cu-Cu bonds during alloying of both Cu(0 1 1) and Cu(1 1 1) surfaces.     

Coverage temperature phase diagram of LEED spot and arced streak intensities for Li on Cu(0 0 1) surface using lattice gas model

It has been established that the arced streaks connecting four spots observed in LEED for a Li system adsorbed on a Cu(0 0 1) surface originate from the Bragg reflection from parallel adatomic lines on a c(2 × 2) lattice site. For example, one streak at about k_y = π/a originates from the parallel atomic lines including two atoms separated at a distance of d_y = 2a, which is the second-neighbor distance in a c(2 × 2) lattice.The c(2 × 2) structure sites consist of two sublattices with y = 2na and y = (2n + 1)a. Here, the difference in the number of adatoms on the two sublattices is the cause of the intensity of the midpoint of the streak, where the differences depend on the coverage of adatoms, Θ.In this study, using a lattice gas model on the substrate lattice with Monte Carlo simulation, we obtain the coverage and temperature dependence of intensities of the spots for the c(2 × 2) structure and the streaks.We found that the intensity of the streaks increase and decrease within the coverage range 0 < Θ < 0.5. That of the spots increases monotonically in this coverage range. These theoretical findings are similar to the experimental results.On the other hand, as temperature is increased, the intensity of the streaks increases and becomes saturated. We found a similar phenomenon using analytical calculation by statistical mechanics. In addition, the intensity of the spots decreased with the second-order transition.     

Mechanism of GeH4 dissociation on Si(1 1 1)-(7 × 7)

Results of an STM study of dissociative GeH₄ adsorption on Si(1 1 1)-(7 × 7) at 300 K show that GeH₄ adsorbs under scission of two Ge-H bonds according to GeH₄(g) + 4db → GeH₂(ad) + 2H(ad). GeH₂ binds to two adatom dangling bonds in a bridged configuration, while the two released hydrogen atoms saturate two additional dangling bonds. The GeH₄ sticking coefficient under these conditions is 1.2 × 10⁻⁶, one order of magnitude smaller than for SiH₄.     

Characterization of crystal lattice constant and dislocation density of crack-free GaN films grown on Si(1 1 1)

GaN have sphalerite structure (Cubic-GaN) and wurtzite structure (hexagonal GaN). We report the H-GaN epilayer with a LT-AlN buffer layer has been grown on Si(1 1 1) substrate by metal-organic chemical vapor deposition (MOCVD). According to the FWHM values of 0.166° and 14.01 cm⁻¹ of HDXRD curve and E₂ (high) phonon of Raman spectrum respectively, we found that the crystal quality is perfect. And based on the XRD spectrum, the crystal lattice constants of Si (a = 5.3354 ?) and H-GaN (a_epi = 3.214 ?, c_epi = 5.119 ?) have been calculated for researching the tetragonal distortion of the sample. These results indicate that the GaN epilayer is in tensile strain and Si substrate is in compressive strain which were good agreement with the analysis of Raman peaks shift. Comparing with typical values of screw-type (D_screw = 7 × 10⁸ cm⁻²) and edge-type (D_edge = 2.9 × 10⁹ cm⁻²) dislocation density, which is larger than that in GaN epilayers growth on SiC or sapphire substrates. But our finding is important for the understanding and application of nitride semiconductors.