Study on Transient Properties of Levitated Object in Near-FieldAcoustic Levitation

A new approach to the study on the transient properties of the levitated object in near-field acoustic levitation (NFAL) is presented. In this article, the transient response characteristics, including the levitated height of an object with radius of 24 mm and thickness of 5 mm, the radial velocity and pressure difference of gas at the boundary of clearance between the levitated object and radiating surface (squeeze film), is calculated according to several velocity amplitudes of radiating surface. First, the basic equations in fluid areas on Arbitrary Lagrange-Euler (ALE) form are numerically solved by using streamline upwind
petrov galerkin (SUPG) finite elements method. Second, the formed algebraic equations and solid control equations are solved by using synchronous
alternating method to gain the transient messages of the levitated object and gas in the squeeze film. Through theoretical and numerical analyses, it
is found that there is a oscillation time in the transient process and that the response time does not simply increase with the increasing of velocity
amplitudes of radiating surface. More investigations in this paper are helpful for the understanding of the transient properties of levitated
object in NFAL, which are in favor of enhancing stabilities and responsiveness of levitated object.     

声悬浮实验中谐振腔形状对声压大小的影响研究

研究了不同谐振腔接收器表面的声压大小,发现谐振腔内增减凹球面反射面对声压波形有较大影响.分析了声压波形发生变化的原因,认为增加凹球面反射面时,声压波形变化是由于声波在谐振腔上下两表面存在非垂直反射.     

气体物理性质对近场超声悬浮特性的影响研究

在利用近场超声悬浮技术搬运晶圆的过程中,为提高近场超声悬浮力,该文研究了气体物理性质与近场超声悬浮力之间的关系。利用声辐射压理论与流体力学理论对不同气体介质下的悬浮力进行建模与求解。搭建了可测量不同气体环境中悬浮力的实验平台。实验发现氩气环境下超声悬浮力平均值相对空气环境下提升24.8%。结合实验与理论计算分析了气体密度、比热容比、声速与动力黏度对悬浮力的影响,推断气体的比热容比为影响近场超声悬浮力的主要参数。该方法为晶圆搬运的环境适用性提供了参考价值。     

Imaging Analysis of Near-Field Recording Technique for Observation of Biological Specimens

We present an analysis of the properties of an imaging based on a near-field recording technique in comparison with simulation results. In the system, the optical field distributions localized near the specimens are recorded as the surface topographic distributions of a photosensitive film. It is possible to observe both soft and moving specimens, because the system does not require a scanning probe to obtain the observed image. The imaging properties are evaluated using fine structures of paramecium, and we demonstrate that it is possible to observe minute differences of refractive indices.     

细菌视紫红质近场光存储特性的研究

结合近场光学显微镜，利用菌紫质M态和基态之间的跃迁，对BR—D96N样品作了静态近场光存储特性的研究。结果表明，近场区域内细菌视紫外质在光激发前后对红光的吸收有较大差别，而且激发后无光照时会缓慢弛豫到激发前的状态，具有光致变色特性和热弛豫特性，可望作为近场光存储材料和微光学信息处理器件材料。     

阶梯型纳米孔径的近场光学局域增强特性研究

提出一种高分辨力与高通光效率兼备的阶梯型纳米孔径设计方法 ,孔径的尺寸从膜层的入射表面向出射表面呈阶梯型逐渐减小 ,直到在膜层的出射表面形成一个亚波长的小孔。采用三维时域有限差分 (FDTD)方法对方形阶梯型纳米孔径及三角形阶梯型纳米孔径进行了数值模拟计算。结果表明 ,由于近场光学很强的局域场增强效应 ,其通光效率与输出光强极大值在具有相同近场光斑尺寸情况下 ,较普通的非阶梯型纳米孔径提高了两个数量级 ,甚至更高 ,有效地提高了输出光功率。采用四台阶三角形阶梯型纳米孔径 ,当光斑半峰全宽为 97nm× 74nm时 ,出射光强极大值达到 10 4 9.76 ,较入射光增强了 10 0 0倍 ,而通光效率大于 1,达到 1.6 7。这种阶梯型纳米孔径可以直接作为纳米孔径激光器的出射孔径提高其输出光功率 ,也可以作为独立的光学屏对入射光进行整形得到具有高输出功率的亚波长尺度光源 ,在纳米尺度光学成像、光谱探测、数据存储、光刻、光学操作等近场光学应用领域具有潜在的应用前景。     

用于超声悬浮场可视化的光学全息相位倍增方法研究

基于二次曝光全息干涉测量原理,采用四倍相位倍增光路对声悬浮声压场分布进行了可视化研究.拍摄了给定模式的超声悬浮场在不同超声换能器激励电流时的光学全息图并进行光学再现,由再现光波的全息干涉条纹图样得到了反映声压场分布的光波波前相位变化,并进行了对比分析.结果表明,与无相位倍增光路相比,采用四倍相位倍增光路可使同一声压场的全息干涉条纹数目大大增加,测量灵敏度明显提高,为进一步研究声悬浮场声压分布提供了一种有效方法.     

Simulated Output Images of Near-Field Optics by Volume Integral Equation: Object Placed on the Dielectric Substrate

We investigated near-field optical (NFO) imaging characteristics of a small object placed on a dielectric slab by a computer-code using a three-dimensional volume integral equation with an effective iteration technique called the generalized minimal residual method. A simplified three-dimensional NFO microscope that consists of a small dielectric object placed on the dielectric substrate and a small dielectric sphere as a scanning probe-tip was considered. Calculating two-dimensional output images obtained from scattered far fields, we studied the effect of the substrate on NFO output images, the comparison of NFO output images with electrostatic field around the small object, the dependence of output image characteristics on the wavelength and the difference of imaging characteristics between incident plane waves and incident evanescent waves.     

扫描近场光学显微镜中两类光纤探针传输特性的研究

采用局域模式耦合理论，对扫描近场光学显微镜中的两类光纤探针－腐蚀锥和熔拉锥的传输特性进行了比较和分析。给出了光在探针锥中传输时耦合效率的分布情况，以及传输效率随锥长，针尖直径和光波长变化的特性。     

薄膜和半无限大介质间的近场辐射换热研究

研究了硼掺杂硅(记为Si-19)薄膜和半无限大物体(Si-19和SiC)在100 nm真空间距下的近场辐射换热随薄膜厚度的变化。研究结果表明,当半无限大物体和薄膜为相同的Si-19材料时,由于表面波激发并相互耦合,使得近场辐射换热随薄膜的厚度变化比较复杂。当半无限大物体为SiC材料时,由于表面波的耦合遭到破坏以及辐射体的高发射率频率区和吸收体的高吸收率频率区不匹配,导致表面波的激发对不同材料间的近场辐射换热的增强程度降低,因此在相同计算区域内热流密度随厚度的增加单调增加,没有出现极值点。     

六方氮化硼薄膜对石墨烯-碳化硅结构近场热辐射的增强

六方氮化硼(hBN)具有跟石墨烯类似的层状结构和晶格参数,研究发现hBN薄膜具有良好的热传导、电绝缘、光学和力学等性能.本文从理论上研究了 hBN薄膜对石墨烯-碳化硅(G/S)结构的近场热辐射的影响.研究发现在红外频段,hBN薄膜在低频率区和高频率区会增强G/S结构的近场热辐射,经计算在G/S结构中加入厚度为10 nm...     

Elastic,Piezoelectric and Acoustic Properties of Wurtzite MnO from Density Functional Calculation

The wurtzite MnO has been obtained lately and is expected to have large potential in varies applications.Since elastic properties are the bases of various applications, we calculate these properties of wurtzite MnO based on the density-functional theory and compare it with other two phases of MnO (rocksalt and zinc-blende MnO). The Young's modulus of wurtzite and zinc-blende MnO are 65.6 GPa and 73.4 GPa, respectively, which are much lower than those of rocksalt MnO (177.6 GPa). More importantly, both the Poisson ratio and the bulk modulus to shear modulus ratio indicate that wurtzite MnO should have much better ductile properties than rocksalt MnO. The calculated piezoelectric constants of wurtzite MnO are comparable to those of ZnO. This suggests wurtzite MnO is a good piezoelectric material.Furthermore, the slowness surfaces of acoustic waves of them are given from Christoffel equation.     

GaN的声表面波特性研究

采用金属有机物化学气相外延方法在(0001)面蓝宝石上生长了高质量、高阻的未掺杂(0001)面GaN薄膜。为精确测量GaN薄膜材料的声表面波特性，在GaN薄膜表面上沉积了金属叉指换能器，叉指换能器采用等叉指结构，叉指的数目为40对，叉指间距为15μm。采用脉冲法测量了声表面波在自由表面和金属表面上的速度，并通过计算得到了机电耦合系数(κ^2)。所测量的声表面波速度（ν)为5667m／s，机电耦合系数(κ^2)为1．9％。     

双声源驱动热声系统声场调制研究

本文在回热器边界声场调制理论的基础上,考虑了两端换热器和谐振管变径的影响,推导出热声系统(谐振管和回热器)内声场与双声源复声压相关的声场调制关系式。理论和实验分析了双声源复声压对谐振管中的行波比率以及回热器中的声阻抗的调制,并给出通过复声压调制后的系统内声场分布图。对比结果表明该声场调制关系式的适用性,通过双声源复声压的调节,能调制出谐振管及回热器所期望的工作声场。     

四能级原子量子相干过程中瞬态光学特性

利用半经典理论研究了N-型四能级相干原子的瞬态光学特性。理论分析表明：当信号光开启的瞬间，介质对探针光的非线性吸收从接近于零的状态迅速增加，经过驰豫振荡过程，趋于稳定状态。本文的研究结果将为吸收型光子开关的设计提供理论依据和参考。     

用扫描近场光学显微镜技术研究金膜表面等离体子共振

表面等离体子波(SPW)可与入射光横磁波极化能量耦合并被共振激发,这种现象被称为表面等离体子共振现象(SPR)。主要利用扫描近场光学显微镜(SNOM)技术和表面等离体子共振现象技术相结合,来研究金膜表面等离体子共振。设计并建立了结构独特的新型Kretschmann型表面等离体子共振现象耦合装置,同时又设计了具有厚度梯度的表面等离体子的制备方法。在此基础上,测量了改变入射角条件下的表面等离体子共振曲线,测得该装置的等离体子共振角灵敏度为1°。并且对金膜表面进行表面等离体子共振条件下的扫描近场光学显微成像。实验结果表明,在共振时金膜表面的扫描成像比不共振时清晰,而且增加了很多细节。应用表面等离体子共振现象技术将可以明显提高扫描近场光学显微镜的信噪比、分辨力等性能。     

基于模糊PID的磁悬浮球控制系统研究

针对磁悬浮球系统的本质不稳定性,设计模糊PID算法实现系统的稳定控制,并使之动态性能及稳态性能满足要求;文中首先分析了磁悬浮球系统的基本原理,并进行力学分析,建立系统的数学模型,并对其中的非线性部分进行了平衡点处的线性化,而后采用用PID控制设计,PID可以实现系统的稳定控制,且控制精度较高,但对于动态性能的改善不足,且当模型中的参数改变时,PID参数的适应性较差;因此在PID参数的基础上,采用模糊PID控制,使得系统既可以满足三性要求,又可以使其具有参数变化的适应能力。     

高功率激光近场诊断系统在线标定光源研制

针对高功率激光装置的特点，提出基于光纤激光的标准光源产生方法，以1053nm单模光纤激光为点源、以空间滤波器透镜为准直透镜获得了口径为300mm×300mm、不均匀性优于4％的均匀光源，成功实现了对神光Ⅲ原型装置近场诊断系统的在线标定。     

Theoretical Analyses on the Resolution of Collection Mode Scanning Near-Field Optical Microscopy

Numerical simulations have been carried out in the framework of waveguide theory to model collection mode scanning near-field optical microscopy (SNOM). The theoretical model includes the optical fiber end and describes the metal coated aperture on the probe tip. The developed formalism goes beyond the existing Bethe-Bouwkamp theories for electromagnetic transmission of subwavelength apertures. The finite coating and optical fiber end are now taken into account. The new features enable us to simulate the near-field probes that are widely used in the collection mode SNOM. The emphases of the numerical analyses have been mainly on the resolution mechanism of the microscopy. Influence on the resolution from important parameters of the probe tips, such as the size of the apertures and the probe-sample distance, is extensively studied. The resolution dependence has been analyzed in the light of the near-field coupling efficiency of the probe tip. An optimum tip size has been found which is balanced between the significant signal transmission and the resolution of the device.     

声悬浮过程的格子Boltzmann方法研究

采用轴对称多弛豫时间格子Boltzmann(LB)方法,研究了圆柱形封闭谐振腔中圆盘形样品的声悬浮过程.模拟结果表明,(001)模式下谐振腔的共振长度L=0.499λ,在谐振腔中心引入样品后共振漂移量δL≈-0.9,这与线性声学理论计算结果基本相符.声悬浮力的LB模拟过程包含了黏滞性效应和共振漂移效应,所获得的模拟结果与理论公式计算值在量值上一致,而且其在细节上更符合实验现象.此外,LB模拟还揭示出了声悬浮过程中的声压波形畸变、声流和声辐射压等非线性声学效应.