Drug Self‐Delivery Systems Based on Hyperbranched Polyprodrugs towards Tumor Therapy

Amphiphilic hyperbranched polyprodrugs (DOX‐S‐S‐PEG) with drug repeat units in hydrophobic core linked by disulfide bonds were developed as drug self‐delivery systems for cancer therapy. The hydroxyl groups and the amine group in doxorubicin (DOX) were linked by 3,3′‐dithiodipropanoic acid as hydrophobic hyperbranched cores, then amino‐terminated polyethylene glycol monomethyl ether (mPEG‐NH₂) as hydrophilic shell was linked to hydrophobic cores to form amphiphilic and glutathione (GSH)‐responsive micelle of hyperbranched polyprodrugs. The amphiphilic micelles can be disrupted under GSH (1 mg mL^?1) circumstance. Cell viability of A549 cells and 293T cells was evaluated by CCK‐8 and Muse Annexin V & Dead Cell Kit. The disrupted polyprodrugs maintained drug activity for killing tumor cells. Meanwhile, the undisrupted polyprodrugs possessed low cytotoxicity to normal cells. The cell uptake experiments showed that the micelles of DOX‐S‐S‐PEG were taken up by A549 cells and distributed to cell nuclei. Thus, the drug self‐delivery systems with drug repeat units in hydrophobic cores linked by disulfide bonds showed significant special advantages: 1) facile one‐pot synthesis; 2) completely without toxic or non‐degradable polymers; 3) DOX itself functions as fluorescent labeled molecule and self‐delivery carrier; 4) drug with inactive form in hyperbranched cores and low cytotoxicity to normal cells. These advantages make them excellent drug self‐delivery systems for potential high efficient cancer therapy.     

Synthesis of PEG‐PNIPAM‐PLys hetero‐arm star polymer and its variation of thermo‐responsibility after the formation of polyelectrolyte complex micelles with PAA

A hetero‐arm star polymer, poly(ethylene glycol)‐poly(N‐isopropylacrylamide)‐poly(L‐lysine) (PEG‐PNIPAM‐PLys), was synthesized by “clicking” the azide group at the junction of PEG‐b‐PNIPAM diblock copolymer with the alkyne end‐group of poly(L‐lysine) (PLys) homopolymer via 1,3‐dipolar cycloaddition. The resultant polymer was characterized by gel permeation chromatography, proton nuclear magnetic resonance, and Fourier transform infrared spectroscopes. Surprisingly, the PNIPAM arm of this hetero‐arm star polymer nearly lose its thermal responsibility. It is found that stable polyelectrolyte complex micelles are formed when mixing the synthesized polymer with poly(acrylic acid) (PAA) in water. The resultant polyelectrolyte complex micelles are core‐shell spheres with the ion‐bonded PLys/PAA chains as core and the PEG and PNIPAM chains as shell. The PNIPAM shell is, as expected, thermally responsive. However, its lower critical solution temperature is shifted to 37.5 °C, presumably because of the existence of hydrophilic components in the micelles. Such star‐like PEG‐PNIPAM‐PLys polymer with different functional arms as well as its complexation with anionic polymers provides an excellent and well‐defined model for the design of nonviral vectors to deliver DNA, RNA, and anionic molecular medicines. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1450–1462, 2009     

Physicochemical properties of pH-controlled polyion complex (PIC) micelles of poly(acrylic acid)-based double hydrophilic block copolymers and various polyamines

The physicochemical properties of polyion complex (PIC) micelles were investigated in order to characterize the cores constituted of electrostatic complexes of two oppositely charged polyelectrolytes. The pH-sensitive micelles were obtained with double hydrophilic block copolymers containing a poly(acrylic acid) block linked to a modified poly(ethylene oxide) block and various polyamines (polylysine, linear and branched polyethyleneimine, polyvinylpyridine, and polyallylamine). The pH range of micellization in which both components are ionized was determined for each polyamine. The resulting PIC micelles were characterized using dynamic light scattering and small-angle X-ray scattering experiments (SAXS). The PIC micelles presented a core–corona nanostructure with variable polymer density contrasts between the core and the corona, as revealed by the analysis of the SAXS curves. It was shown that PIC micelle cores constituted by polyacrylate chains and polyamines were more or less dense depending on the nature of the polyamine. It was also determined that the density of the cores of the PIC micelles depended strongly on the nature of the polyamine. These homogeneous cores were surrounded by a large hairy corona of hydrated polyethylene oxide block chains. Auramine O (AO) was successfully entrapped in the PIC micelles, and its fluorescence properties were used to get more insight on the core properties. Fluorescence data confirmed that the cores of such micelles are quite compact and that their microviscosity depended on the nature of the polyamine. The results obtained on these core–shell micelles allow contemplating a wide range of applications in which the AO probe would be replaced by various cationic drugs or other similarly charged species to form drug nanocarriers or new functional nanodevices.     

Nanometer‐Scaled Hollow Spherical Micelles with Hydrophilic Channels and the Controlled Release of Ibuprofen

PS‐b‐PAA spherical micelles with a liquid core and a PAA shell are prepared with the assistance of 1,2‐dichloroethane. During the process of adding a mixture of PNIPAM‐b‐P4VP and PEG‐b‐P4VP, multi‐layered micelles with a mixed corona that consists of both PNIPAM and PEG chains are constructed through the electrostatic interaction and hydrogen bonding between the PAA block and the P4VP block. When heating above the LCST, the PNIPAM chains collapse onto the PAA/P4VP complex layer while the PEG chains still stretch into the solution through the collapsed PNIPAM layer, which leads to the formation of hydrophilic channels around the PEG chains. The ibuprofen encapsulated in the hollow space can diffuse through the channels and its release rate can be controlled by changing the ratio of PEG chains to PNIPAM chains in the corona.

     

Synthesis and properties of fluorine‐containing amphiphilic graft copolymer P(HFMA)‐g‐P(SPEG)

A series of amphiphilic graft copolymers P(HFMA)‐g‐P(SPEG) comprising poly(hexafluorobutyl methacrylate) (PHFMA) backbones and poly(ethylene glycol) (PEG) side chains were synthesized by copolymerization of HFMA and SPEG macromonomer with the p‐vinylbenzyl end group. The SPEG macromonomer was synthesized by reacting Methoxy poly(ethylene glycol) (MPEG) with p‐chloromethylstyrene in THF in the presence of NaH. The macromonomer and amphiphilic graft copolymer were characterized by FTIR, ¹H NMR, ¹⁹F NMR, and gel permeation chromatography (GPC). The critical micelle concentration (CMC) of the amphiphilic graft copolymer was measured by surface tension technique. The results showed that the CMC decreased with increasing HFMA contents in the graft copolymers. The interaction between P(HFMA)‐g‐P(SPEG) and bovine serum albumin (BSA) was studied by fluorescence spectroscopy, transmission electron microscopy (TEM), and photon correlation spectroscopy (PCS). The fluorescence spectrum showed that the fluorescence intensity of BSA increased with increasing content of HFMA in P(HFMA)‐g‐P(SPEG) and concentration of P(HFMA)‐g‐P(SPEG) in the P(HFMA)‐g‐P(SPEG)/BSA solution. TEM micrographs showed that P(HFMA)‐g‐P(SPEG) mainly formed core‐shell structure micelles. When BSA was added, the micelles changed from a core‐shell structure into a worm‐like, vesicle‐like and hollow‐like structure with different initial concentrations of the copolymer. The size distribution of the micelles increased proving that the copolymer micelles encapsulated the bovine serum albumin. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4895–4907, 2009     

Doubly hydrophilic multiarm hyperbranched polymers with acylhydrazone linkages as acid-sensitive drug carriers

A novel type of drug carrier capable of controlled drug release is proposed. It consists of an acid-sensitive doubly hydrophilic multiarm hyperbranched copolymer with a hyperbranched polyamidoamine core and many linear poly(ethylene glycol) arms. Using pH-sensitive acylhydrazone linkages, the polymer forms unimolecular micelles that can encapsulate hydrophobic drugs. Due to their amphiphilicity, the drug-loaded unimolecular micelles can self-assemble into multimolecular micelles that show acid-triggered intracellular delivery of the hydrophobic drugs.     

Amphiphilic diblock copolymers bearing pendant aromatic acetal groups: Synthesis and tunable pH‐triggered assembly/disassembly transition behavior

A novel aromatic acetal‐based acid‐labile monomer 2‐phenyl‐5‐ethyl‐5‐acryloxymethyl‐1,3‐dioxacyclohexane (HEDPA) was synthesized and polymerized by reversible addition fragmentation chain transfer (RAFT) polymerization using alkynyl functional chain transfer agent (CTA‐Alk). Afterward, a series of amphiphilic diblock copolymers composed of fixed hydrophobic poly(2‐phenyl‐5‐ethyl‐5‐acryloxymethyl‐1,3‐dioxacyclohexane) (PDAEP) segments and various lengths of hydrophilic mPEG segments were prepared through click reaction between alkynyl‐terminated PDAEP and azido‐terminated mPEG. The self‐assembly behaviors of the diblock copolymers were investigated by dynamic light scattering (DLS), transmission electron microscopy (TEM), fluorescence spectroscopy, and ¹H NMR. These results indicated that the diblock copolymers could self‐assemble into nano‐sized micelles with PDAEP cores and PEG coronas in aqueous solution. DLS, fluorescence spectroscopy and UV–vis spectroscopy were used to monitor the pH‐triggered assembly/disassembly transition of the micelles. These results showed that the assembly/disassembly transition behaviors of the diblock copolymers micelles can be adjusted by changing the lengths of the mPEG segments. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1537–1547     

Construction of temperature responsive hybrid crosslinked self‐assemblies based on PEG‐b‐P(MMA‐co‐MPMA)‐b‐PNIPAAm triblock copolymer: ATRP synthesis and thermoinduced association behavior

A novel amphiphilic thermosensitive poly(ethylene glycol)₄₅‐b‐poly(methyl methacrylate₄₆‐co‐3‐(trimethoxysilyl)propyl methacrylate)₂‐b‐poly(N‐isopropylacrylamide)₄₂₉ (PEG₄₅‐b‐P(MMA₄₆‐co‐MPMA₂)‐b‐PNIPAAm₄₂₉) triblock copolymer was synthesized via consecutive atom transfer radical polymerization techniques. The thermoinduced association behavior of the resulting triblock copolymers in aqueous medium was further investigated in detail by ¹H NMR, transmission electron microscopy, and dynamic light scattering. The results showed that at the temperature (25 °C) below the LCST, PEG₄₅‐b‐P(MMA₄₆‐co‐MPMA₂)‐b‐PNIPAAm₄₂₉ triblock copolymers self‐assembled into the core crosslinked micelles with the hydrophobic P(MMA‐co‐MPMA) block constructing a dense core, protected by the mixed soluble PEG and PNIPAAm chains acting as a hydrophilic shell simultaneously. With an increase in temperature, the resulting core‐shell micelles converted into a new type of micelles with the hydrophilic PEG chains stretching out from the hydrophobic core through the collapsed PNIPAAm shell. On the other hand, at the temperature (40 °C) above the LCST, such triblock copolymers formed the crosslinked vesicles with the hydrophobic PNIPAAm and P(MMA‐co‐MPMA) blocks constructing a membrane core and the soluble PEG chains building the hydrophilic lumen and the shell. On further decreasing the temperature, the resulting vesicles underwent transformation from the shrunken to the expanded status, leading to the formation of swollen vesicles with enlarged size. This study is believed to present the first formation of two types of hybrid crosslinked self‐assemblies by thermoinduced regulation. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

基于环糊精包结络合作用的大分子自组装

本文综述了基于环糊精包结络合作用的大分子自组装的研究进展,包括：（1) 线型、梳型、多臂星型或超支化聚合物与环糊精或其二聚体自组装形成多聚轮烷（分子项链）、多聚准轮烷、双多聚（准）轮烷、分子管、双分子管、超分子凝胶及其应用;（2）桥联环糊精与桥联客体分子自组装制备线型或超支化超分子聚合物;（3）温度、pH值、光及客体分子刺激响应智能体系; （4) 通过亲水性的环糊精线型均聚物与含金刚烷的疏水性聚合物之间的包结络合作用来制备高分子胶束及其空心球等。     

Bioreducible unimolecular micelles based on amphiphilic multiarm hyperbranched copolymers for triggered drug release

A novel type of bioreducible amphiphilic multiarm hyperbranched copolymer (H40-star-PLA-SS-PEG) based on Boltorn® H40 core, poly(l-lactide) (PLA) inner-shell, and poly(ethylene glycol) (PEG) outer-shell with disulfide-linkages between the hydrophobic and hydrophilic moieties was developed as unimolecular micelles for controlled drug release triggered by reduction. The obtained H40-star-PLA-SS-PEG was characterized in detail by nuclear magnetic resonance (NMR), Fourier transform infrared (FTIR), gel permeation chromatography (GPC), differential scanning calorimeter (DSC), and thermal gravimetric analysis (TGA). Transmission electron microscopy (TEM) and dynamic light scattering (DLS) analyses suggested that H40-star-PLA-SS-PEG formed stable unimolecular micelles in aqueous solution with an average diameter of 19 nm. Interestingly, these micelles aggregated into large particles rapidly in response to 10 mM dithiothreitol (DTT), most likely due to shedding of the hydrophilic PEG outer-shell through reductive cleavage of the disulfide bonds. As a hydrophobic anticancer model drug, doxorubicin (DOX) was encapsulated into these reductive unimolecular micelles. In vitro release studies revealed that under the reduction-stimulus, the detachment of PEG outer-shell in DOX-loaded micelles resulted in a rapid drug release. Flow cytometry and confocal laser scanning microscopy (CLSM) measurements indicated that these DOX-loaded micelles were easily internalized by living cells. Methyl tetrazolium (MTT) assay demonstrated a markedly enhanced drug efficacy of DOX-loaded H40-star-PLA-SS-PEG micelles as compared to free DOX. All of these results show that these bioreducible unimolecular micelles are promising carriers for the triggered intracellular delivery of hydrophobic anticancer drugs.     

CO2‐Activated Reversible Transition between Polymersomes and Micelles with AIE Fluorescence

Fluorescent polymersomes with both aggregation‐induced emission (AIE) and CO₂‐responsive properties were developed from amphiphilic block copolymer PEG‐b‐P(DEAEMA‐co‐TPEMA) in which the hydrophobic block was a copolymer made of tetraphenylethene functionalized methacrylate (TPEMA) and 2‐(diethylamino)ethyl methacrylate (DEAEMA) with unspecified sequence arrangement. Four block copolymers with different DEAEMA/TPEMA and hydrophilic/hydrophobic ratios were synthesized, and bright AIE polymersomes were prepared by nanoprecipitation in THF/water and dioxane/water systems. Polymersomes of PEG₄₅‐b‐P(DEAEMA₃₆‐co‐TPEMA₆) were chosen to study the CO₂‐responsive property. Upon CO₂ bubbling vesicles transformed to small spherical micelles, and upon Ar bubbling micelles returned to vesicles with the presence of a few intermediate morphologies. These polymersomes might have promising applications as sensors, nanoreactors, or controlled release systems.     

New approaches to stimuli-responsive polymeric micelles and hollow spheres

This article briefly describes some new approaches to stimuli-sensitive polymeric micelles and hollow spheres, which were developed in the authors’ laboratory in recent years. (1) Self-assembly of component polymers to non-covalently connected micelles (NCCM) driven by specific interactions. For example, in water, PCL and PAA formed core-shell nanospheres due to interpolymer hydrogen bonding. After crosslinking the PAA shell and removing the PCL core, “nanocages” made of PAA network were obtained. This hollow structure shows perfect reversible size-pH dependence. (2) Simultaneous in-situ polymerization of monomers and self-assembly of the polymers. In this approach, PNIPAM network was formed by radical polymerization covering PCL particles. Hollow spheres of PNIPAM network were then obtained by biodegradation of the PCL core. Both the core-shell spheres and hollow spheres show reversible size dependence on temperature change because of the phase transition of PNIPAM around 32°C. (3) Complexation-induced micellization and transition between the micelles and hollow spheres. Graft copolymers of hydroxylethyl cellulose (HEC) and PAA were prepared by free radical polymerization. The copolymers showed pH dependent micellization, i.e., micelles formed when pH of the graft copolymer solution decreased to around 3. The micellar structure could be locked by crosslinking the PAA grafts. The resultant cross-linked micelles undergo pH-dependent transition between the micelles and hollow spheres, which accompanies a remarkable particle size change. Both the micellization and the structure transition were found to be reversible and associated with H-bonding complexation between the main chain and grafts. __________ Translated from Acta Polymerica Sinica, 2005, 650(5) (in Chinese)     

Micellization and luminescence of PEG-b-P4VP/Europium(III)/1,10-phenanthroline complex

Luminescent micelles were prepared through the self-assembly of poly(ethylene glycol)-block-poly(4-vinylpyridine) (PEG₁₁₄-b-P4VP₆₁) and Europium(III) (Eu(III)), with P4VP/Eu(III) as the core, and PEG as the corona. 1,10-phenanthroline (Phen) was assembled into the core of the micelles to sensitize the luminescence. The presence of Phen results into the increasing of apparent average hydrodynamic diameters (D_h^app {\hbox{D}}_{\rm{h}}^{\rm{app}} ) of the micelles. All Eu(III)-containing micelles emitted the characteristic fluorescence of Eu(III). The intensity of luminescence increased with the presence and the increasing quantity of Phen in the complex micelles due to the effective energy transferring of Phen in the “antenna effect”.     

pH敏感型mPEG-Hz-PLA聚合物纳米载药胶束的制备

以合成的含有腙键的聚乙二醇大分子(mPEG-Hz-OH)为引发剂,以丙交酯为单体引发开环聚合反应,并通过调整投料比,制备出3种不同分子量的含腙键的生物可降解嵌段聚合物(mPEG-Hz-PLA).将腙键引入到聚合物的骨架中,以此构建聚合物胶束并作为pH敏感型纳米药物载体.制备的pH敏感型胶束的CMC值等于或低于5.46×10-4 mg/m L,DLS和TEM显示粒径均小于100 nm,且粒径分布均匀.非pH敏感型胶束在不同pH下的粒径变化不明显,而pH敏感型胶束在酸性环境下(pH=4.0和pH=5.0)胶束粒径出现了明显变化.以阿霉素为模型药物制备了pH敏感型载药胶束,其粒径比空白胶束大(100~200 nm),且粒径分布均匀.药物释放实验表明pH敏感型载药胶束随着释放介质pH降低累积释药量增高.MTT实验表明空白胶束对HeLa细胞和RAW264.7细胞几乎没有抑制作用,而载阿霉素的胶束对2种细胞的抑制作用都随着剂量的增大和时间的延长而增强.     

基于水杨醛席夫碱锌配合物交联稳定化荧光聚合物胶束的合成及其对铜离子的荧光响应性

以S-十二烷基-S'-(α,α'-二甲基-α″-乙酸)-三硫代碳酸酯(DMAT)为链转移剂、2-羟基-5-乙烯基苯甲醛(HVB)为单体,利用可逆加成-断裂链转移自由基聚合法(RAFT)合成结构明确、数均相对分子质量可控的水杨醛聚合物(PHVB)。将PHVB直接地与单端胺基功能化聚乙二醇(m PEG-NH2)按n(—NH2group)/n(—CHO group)=0.50投料进行醛-胺缩合反应,获得接枝率为50%的两亲性接枝水杨醛席夫碱聚合物PHVB-graft-PEG。采用凝胶渗透色谱仪(GPC)和核磁共振氢谱(1H NMR)对合成的聚合物的数均相对分子质量和结构进行了确证。将PHVB-graft-PEG直接地分散于无水乙醇中,自组装形成以聚乙烯水杨醛席夫碱为核、聚乙二醇为壳的胶束,然后以所得胶束为微反应器,与Zn(OAc)2进行配位反应得到外壳为可溶性链段PEG,内核为发光水杨醛席夫碱锌配合物的PHVB-graft-PEG/Zn~(2+)交联稳定化胶束。通过紫外-可见分光光谱(UV-Vis)、荧光发射光谱(FLL)、动态光散射(DLS)和透射电子显微镜(TEM)分别对胶束的交联稳定化过程进行了表征。研究结果表明,经交联稳定化后,PHVB-graft-PEG/Zn~(2+)胶束在干燥后仍可在水和常见有机溶剂中再分散形成粒径大小约为100 nm、在约460 nm处发射出蓝光荧光的纳米粒子,并且可作为荧光传感器,在水溶液中对Cu~(2+)离子进行选择性识别,其荧光淬灭率与Cu~(2+)离子浓度(0~50μmol/L范围内)呈线性关系,最低检测下限至0.5μmol/L,而其它共存离子如Cd~(2+)、Mg~(2+)、Ni~(2+)、Pb~(2+)、Ca~(2+)、Hg~(2+)、Al3+、Mn~(2+)等对Cu~(2+)离子的荧光响应性没有干扰,即可实现对Cu~(2+)离子进行定量检测。     

Modulating the catalytic activity of Au/micelles by tunable hydrophilic channels

Polymeric micelles with a polystyrene core, poly(acrylic acid)/poly(4-vinyl pyridine) (PAA/P4VP) complex shell and poly(ethylene glycol) & poly(N-isopropylacrylamide) (PEG & PNIPAM) mixed corona were synthesized and used as the supporter for the gold nanoparticles (GNs). It was concluded from the result of ¹H NMR characterization that hydrophilic channels formed around PEG chains when PNIPAM collapsed above its lower critical solution temperature. The density of the channels in the corona can be tuned by changing the weight ratios of PEG chains to PNIPAM chains. The GNs were set in the PAA/P4VP complex layer and the catalytic activity of the GNs can be modulated by the channels. The catalytic activity increased with increasing the density of the channels in the corona. Meanwhile, the whole Au/micelle nanoparticles were stabilized by the extended PEG chains.     

溶剂热方法合成Cu2ZnSnS4空心球

以氯化亚铜,硝酸锌,氯化锡和硫脲作为反应前驱体,聚乙二醇作为模板,利用溶剂热方法合成Cu₂ZnSnS₄中空球。其中,聚乙二醇对于产物的最终形成起到关键作用。文章讨论了Cu₂ZnSnS₄中空球的生长机制,并通过X射线衍射(XRD)、拉曼光谱、场发射电子显微镜(FESEM)、透射电子显微镜(TEM)、X射线能量色散谱(EDX)、X射线光电子谱(XPS)、选区电子衍射谱(SAED)和紫外-可见光分光光度计(UV-Vis)等技术对样品的微结构以及光学性质进行了表征和分析。结果显示Cu₂ZnSnS₄中空球为四方晶体,尺寸为600 nm。其禁带宽度为1.52 eV,适用于制作光伏器件。     

Self‐Assembly of Poly(γ‐benzyl L‐glutamate)‐graft‐Poly(ethylene glycol) and Its Mixtures with Poly(γ‐benzyl L‐glutamate) Homopolymer

Summary: Self‐association behaviors of poly(γ‐benzyl L ‐glutamate)‐graft‐poly(ethylene glycol) (PBLG‐graft‐PEG) and its mixtures with PBLG homopolymer in aqueous media were investigated by fluorescence spectroscopy, transmission electron microscopy (TEM), and nuclear magnetic resonance (NMR) spectroscopy. It was revealed that PBLG‐graft‐PEG could self‐assemble to form polymeric micelles with a core‐shell structure in the shape of spindle. The introduction of PBLG homopolymer not only decreases the critical micelle concentration, but also changes the morphology of the micelles.

The excitation fluorescence spectra of pyrene as a function of concentrations for the mixture of PBLG‐graft‐PEG with PBLG and a TEM image of the formed micelles.     

Micellization and reversible pH-sensitive phase transfer of the hyperbranched multiarm PEI-PBLG Copolymer

A novel, hyperbranched, amphiphilic multiarm biodegradable polyethylenimine-poly(gamma-benzyl-L-glutamate) (PEI-PBLG) copolymer was prepared by the ring-opening polymerization of gamma-benzyl-L-glutamate-N-carboxyanhydride (BLG-NCA) with hyperbranched PEI as a macroinitiator. The copolymer could self-assemble into core-shell micelles in aqueous solution with highly hydrophobic micelle cores. As the PBLG content was increased, the size of the micelles increased and the critical micelle concentration (CMC) decreased. The surface of the micelles had a positive zeta potential. The cationic micelles were capable of complexing with plasmid DNA (pDNA), which could be released subsequently by treatment with polyanions. The PEI-PBLG copolymer formed unimolecular micelles in chloroform solution. The pH-sensitive phase-transfer behavior exhibited two critical pH points for triggering the encapsulation and release of guest molecules. Both the encapsulation and release processes were rapid and reversible. Under strong acidic or alkaline conditions, the release process became partially or completely irreversible. Thus, this copolymer system should be an attractive candidate for a gene- or drug-delivery system in aqueous media and could provide the phase-transfer carriers between water and organic media.     

Polymeric nanospheres with tunable sizes,water dispersibility,and thermostability from heating‐enabled micellization of polysulfone‐block‐polyethylene glycol

Polymeric nanospheres with uniform sizes, functional surfaces, and high mechanical strength and thermostability are attracting wide interest in different applications. Here, a new kind of polysulfone micellar spheres with PEGylated surfaces is prepared via directly heating the solution of an amphiphilic block copolymer, polysulfone‐b‐polyethylene glycol (PSF‐b‐PEG). The sizes of the micelles are uniform and tunable between ∼42 and ∼443 nm. TEM characterizations show that the micelles are core‐shell structures with PEG as the corona and PSF as the core. PEG endows the micelles with dispersibility in water and good biocompatibility, while PSF provides the mechanical strength and thermostability. The effects of PEG contents, polymer solution concentrations, solvent types, and heating temperatures are systematically investigated. Furthermore, heat resistance tests show that the micelles are stable at 150–180 °C. These PSF‐b‐PEG micellar spheres are expected to be applied in demanding environmental conditions such as heating involved surface modification process. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 769–777