Asymmetric oxidation of sulfides catalyzed by chiral (salen)Mn(III) complexes with a pyrrolidine backbone

Catalytic properties of a series of chiral (pyrrolidine salen)Mn(III) complexes for asymmetric oxidation of aryl methyl sulfides were evaluated. Moderate activity, good chemical selectivity and low enantioselectivity were attained with iodosylbenzene as a terminal oxidant. Enantioselectivity of sulfide oxidation was affected slightly by polar solvent and the sulfoxidation carried out in THF for thioanisole and in CH₃CO₂Et for electron‐deficient sulfides gave better enatioselctivities. The addition of the donor ligand PPNO (4‐phenylpyridine N‐oxide) or MNO (trimethylamine N‐oxide) only has a minor positive effect on the enantioselectivity. Also explored was the steric effect of the N_aza‐substituent in the backbone of (pyrrolidine salen)Mn(III) complexes on the enantioselectivity of sulfide oxidation. The sulfides' access pathway is discussed based on the catalytic results. Copyright © 2006 John Wiley & Sons, Ltd.     

The synthesis of n‐substituted isothiazol‐3(2h)‐ones from nsubstituted 3‐benzoylpropionamides

N‐Substituted isothiazol‐3(2H)‐ones can be easily prepared from N‐substituted 3‐benzoylpropi‐onamides in two experimentally simple steps, in satisfactory overall yields. Reaction of the amides with excess thionyl chloride results in the formation of N‐substituted 5‐benzoylisothiazol‐3(2H)‐ones, which are readily debenzoylated with alkali to the corresponding N‐substituted isothiazol‐3(2H)‐ones. This method has now been successfully applied to the synthesis of isothiazolones N‐substituted with a bulky alkyl group, such as the tert‐butyl group, and with a phenyl group bearing either a strong electron‐withdrawing substituent, such as the 3‐nitrophenyl and 4‐nitrophenyl group, or an electron‐releasing substituent, such as the 4‐methylphenyl and 4‐methoxyphenyl group.     

Linear Free‐Energy Relationships Applied to the 13C NMR Chemical Shifts in 4‐Substituted N‐[1‐(Pyridine‐3‐ and ‐4‐yl)ethylidene]anilines

Two series of 4‐substituted N‐[1‐(pyridine‐3‐ and ‐4‐yl)ethylidene]anilines have been synthesized using different methods of conventional and microwave‐assisted synthesis, and linear free‐energy relationships have been applied to the ¹³C NMR chemical shifts of the carbon atoms of interest. The substituent‐induced chemical shifts have been analyzed using single substituent parameter and dual substituent parameter methods. The presented correlations describe satisfactorily the field and resonance substituent effects having similar contributions for C1 and the azomethine carbon, with exception of the carbon atom in para position to the substituent X. In both series, negative ρ values have been found for C1′ atom (reverse substituent effect). Quantum chemical calculations of the optimized geometries at MP2/6‐31G++(d,p) level, together with ¹³C NMR chemical shifts, give a better insight into the influence of the molecular conformation on the transmission of electronic substituent effects. The comparison of correlation results for different series of imines with phenyl, 4‐nitrophenyl, 2‐pyridyl, 3‐pyridyl, 4‐pyridyl group attached at the azomethine carbon with the results for 4‐substituted N‐[1‐(pyridine‐3‐ and ‐4‐yl)ethylidene]anilines for the same substituent set (X) indicates that a combination of the influences of electronic effects of the substituent X and the π₁‐unit can be described as a sensitive balance of different resonance structures.     

Influence of the built-in pyridinium salt on asymmetric epoxidation of substituted chromenes catalysed by chiral (pyrrolidine salen)Mn(III) complexes

Chiral (pyrrolidine salen)Mn(III) complexes 1 with an N-benzoyl group and 2 with an N-isonicotinoyl group as well as the corresponding N-methyl (3) and N-benzyl (4) pyridinium salts of 2 were synthesized. The catalytic properties of 1–4 and 2 with excess CH₃I were explored to figure out the influence of the internal pyridinium salt in the catalyst on asymmetric epoxidation of substituted chromenes with NaClO/PPNO as an oxidant system in the aqueous/organic biphasic medium. The (pyrrolidine salen)Mn(III) complexes with an internal pyridinium salt, either formed in situ or isolated, displayed higher activities than analogous complexes 1, 2 and Jacobsen's catalyst in the aforementioned reaction, with comparable high yields and ee values. The acceleration of the reaction rate is attributed to the phase transfer capability of the built-in pyridinium salt of the (salen)Mn(III) catalyst. The effect of the internal pyridinium salt on the epoxidation of substituted chromenes is similar to that of the external pyridinium salts and ammonium halides.     

Substituent Effect on N-Benzylideneanilines by DFT Energy Partition

To investigate the substituent effect on x-electron delocalization of the N-benzylideneaniline （NBA）, the vertical resonance energies △E^V（θ） of eleven substituted NBAs were separated into n and a parts at the B3LYP/6-311G（d） level of the Density Functional Theory （DFT）. When substituted with an electron-releasing group --OH, the calculated △E^V（θ） of NBA was increased, indicative of more resonance destabilization than the mother molecule. However, when substituted with an electron-withdrawing group -NO2, the calculated △E^V（θ） values indicated less resonance destabilization. The most destabilizing effect was observed especially when the -OH group located at the ortho-position of the aromatic ring in the fragment -N=CH-Ar. For most of the substituted NBA molecules, it was the destabilized a framework that determined the destabilizing feature of the vertical resonance energy, instead of the stabilized n system. When the -NO2 substituent at the para-position of the aromatic ring of the -N=CH-Ar group, the π system had the highest stabilizing effect while the σ framework exhibited the highest destabilizing effect. While the -NO2 substituent was at the para-position of the left aromatic ring （At-）, the NBA had the least vertical resonance energy value.     

Electronic Tuning of Iron–Oxo‐Mediated C?H Activation: Effect of Electron‐Donating Ligand on Selectivity

We have reported previously that an iron(III) complex supported by an anionic pentadentate monoamido ligand, dpaq^H (dpaq^H=2‐[bis(pyridin‐2‐ylmethyl)]amino‐N‐quinolin‐8‐yl‐acetamido), promotes selective C? H hydroxylation with H₂O₂ with high regioselectivity. Herein, we report on the preparation of Fe^III–dpaq derivatives that have a series of substituent groups at the 5‐position of a quinoline moiety in the parent ligand dpaq^H (dpaq^R, R: OMe, H, Cl, and NO₂), and examine them with respect to their catalytic activity in C? H hydroxylation with H₂O₂. As the substituent group becomes more electron‐withdrawing, both the selectivity and the turnover number increase, but the selectivity of epoxidation shows the opposite trend.     

Synthesis of a variety of star‐shaped polybenzamides via chain‐growth condensation polymerization with tetrafunctional porphyrin initiator

A variety of well‐defined tetra‐armed star‐shaped poly(N‐substituted p‐benzamide)s, including block poly(p‐benzamide)s with different N‐substituents, and poly(N‐substituted m‐benzamide)s, were synthesized by using porphyrin‐cored tetra‐functional initiator 2 under optimized polymerization conditions. The initiator 2 allowed discrimination of the target star polymer from concomitantly formed linear polymer by‐products by means of GPC with UV detection, and the polymerization conditions were easily optimized for selective synthesis of the star polybenzamides. Star‐shaped poly(p‐benzamide) with tri(ethylene glycol) monomethyl ether (TEG) side chain was selectively obtained by polymerization of phenyl 4‐{2‐[2‐(2‐methoxyethoxy)ethoxy]ethylamino}benzoate ( 1b ′) with 2 at ?10 °C in the case of [ 1b ′]₀/[ 2 ]₀ = 40 and at 0 °C in the case of [ 1b ′]₀/[ 2 ]₀ = 80. Star‐shaped poly(p‐benzamide) with 4‐(octyloxy)benzyl (OOB) substituent was obtained only when methyl 4‐[4‐(octyloxy)benzylamino]benzoate ( 1c ) was polymerized at 25 °C at [ 1c ]₀/[ 2 ]₀ = 20. On the other hand, star‐shaped poly(m‐benzamide)s with N‐butyl, N‐octyl, and N‐TEG side chains were able to be synthesized by polymerization of the corresponding meta‐substituted aminobenzoic acid alkyl ester monomers 3 at 0 °C until the ratio of [ 3 ]₀/[ 2 ]₀ reached 80. However, star‐shaped poly(m‐benzamide)s with the OOB group were contaminated with linear polymer even when the feed ratio of the monomer 3d to 2 was 20. The UV–visible spectrum of an aqueous solution of star‐shaped poly(p‐benzamide) with TEG side chain indicated that the hydrophobic porphyrin core was aggregated. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Design and stereoselective synthesis of four peptide nucleic acid monomers with cyclic structures in backbone

Four isomers of the monomer of peptide nucleic acid (PNA) were derived from (2S,4R)‐4‐hydroxyproline; they had different stereochemistries at the C² and C⁴ positions in the pyrrolidine ring. These different backbone conformations corresponding to four different stereochemistries were realized through a combination of inversions at the C² and the C⁴ positions in pyrrolidine ring. The obtained backbone frameworks were reacted with N‐benzoyl thymine to give the corresponding PNA monomers. Spectroscopic comparison of the resultant monomers confirmed their stereochemistries. J. Heterocyclic Chem., (2011).     

Synchronizing Steric and Electronic Effects in {RuII(NNNN,P)} Complexes: The Catalytic Dehydrative Alkylation of Anilines by Using Alcohols as a Case Study

A series of new hexacoordinated {Ru^II(NNNN,P)} complexes was prepared from [RuCl₂(R₃P)₃]. Their structure was determined by X‐ray crystallography. The catalytic potential of this new class of complexes was tested in the alkylation of aniline with benzyl alcohol. In this test reaction, the influence of the counteranion plus electronic influences at the tetradentate ligand and the phosphine ligand were examined. The electrochemistry of all complexes was studied by cyclic voltammetry. Depending on the substituent at the ligand backbone, the complexes showed a different behavior. For all N‐benzyl substituted complexes, reversible Ru^II/III redox potentials were observed, whereas the N‐methyl substituted complex possessed an irreversible oxidation event at small scan rates. Furthermore, the electronic influence of different substituents at the ligand scaffold and at the phosphine on the Ru^II/III redox potential was investigated. The measured E₀ values were correlated to the theoretically determined HOMO energies of the complexes. In addition, these HOMO energies correlated well with the reactivity of the single complexes in the alkylation of aniline with benzyl alcohol. The exact balance of redox potential and reactivity appears to be crucial for synchronizing the multiple hydrogen‐transfer events. The optimized catalyst structure was applied in a screening on scope and limitation in the catalytic dehydrative alkylation of anilines by using alcohols.     

Transesterification Kinetics Investigation of R‐Substituted Phenyl Benzoates with 4‐Methoxyphenol in the Presence of K2CO3 in DMF

Transesterification of R‐substituted phenyl benzoates 1–5 with 4‐methoxyphenol 6 was kinetically investigated in the presence of K₂CO₃ in dimethylformamide (DMF) at various temperatures. The Hammett plots for the reactions of the 1–5 demonstrate good linear correlations with σ⁰ constants. Low magnitude of ρ_LG values indicate that the leaving group departure occurs after the rate‐determining step. The Brønsted coefficient values for the reactions (?0.2, ?0.16, ?0.13 at 15, 24, 36°C, respectively) demonstrate the weak effect of leaving group substituent on the reactivity of R‐substituted phenyl benzoates 1–5 for the reactions with 4‐methoxyphenol 6 in the presence of K₂CO₃ in DMF. The leaving group substituent effect on free energy (ΔG^≠), enthalpy (ΔH^≠), and entropy (ΔS^≠) of activation was examined. It was shown that the activation parameters obtained depend weakly on the leaving group substituent effect. The reaction is entropy controlled in case the leaving group substituent becomes electron withdrawing.     

Cobalt‐Catalyzed Cyclization of N‐Methoxy Benzamides with Alkynes using an Internal Oxidant through C−H/N−O Bond Activation

The cyclization of substituted N‐methoxy benzamides with alkynes in the presence of an easily affordable cobalt complex and NaOAc provides isoquinolone derivatives in good to excellent yields. The cyclization reaction is compatible with a range of functional group‐substituted benzamides, as well as ester‐ and alcohol‐substituted alkynes. The cobalt complex [Co^IIICp*(OR)₂] (R=Me or Ac) serves as an efficient catalyst for the cyclization reaction. Later, isoquinolone derivatives were converted into 1‐chloro and 1‐bromo substituted isoquinoline derivatives in excellent yields in the presence of POCl₃ or PBr₃.     

Synthesis of Asymmetrically Substituted Terpyridines by Palladium‐Catalyzed Direct C?H Arylation of Pyridine N‐Oxides

The synthesis of asymmetrically substituted 2,2′:6′,2′′‐terpyridines is reported. First, palladium‐catalyzed C? H arylation of pyridine N‐oxides with substituted bromopyridines gave 2,2′‐bipyridine N‐oxides, which were further arylated in a second step to form 2,2′:6′,2′′‐terpyridine N‐oxides. Yields of up to 77 % were obtained with N‐oxides bearing an electron‐withdrawing ethoxycarbonyl substituent in the 4‐position. Pd(OAc)₂ with either P(tBu)₃ or P(o‐tolyl)₃ was used as the catalyst. Cyclometalated complexes derived from Pd(OAc)₂ and these phosphines were also effective. K₃PO₄ as the base gave better results than K₂CO₃. Subsequent deoxygenation with H₂ and Pd/C as the catalyst gave the asymmetrically substituted 2,2′:6′,2′′‐terpyridines in near quantitative yield. This reaction sequence significantly reduces the number of steps required in comparison with known cross‐coupling methods and therefore allows convenient and scalable access to substituted terpyridines.     

Mechanism and Linear Free Energy Relationships in Michael‐Type Addition of 4‐Substituted Anilines to Activated Olefin in Acetonitrile

Kinetic studies for the Michael‐type reactions of ethyl‐3‐(4′‐N,N‐dimethylaminophenyl)‐2‐(nonafluorobutane)sulfonylpro‐penoate 1 with 4‐X‐substituted anilines 2a–e (X = OCH₃, CH₃, H, F, and Cl) have been investigated in acetonitrile at 20°C. A quadratic dependence of the pseudo–first‐order rate constants (k_obsd) versus [ 2a–e ] has been observed and has been interpreted in terms of a dimer nucleophile mechanism. The finding of a relatively large negative ρ value (?3.09) for the Hammett plot suggests that the intermediate ( I^± ) is highly zwitterionic in nature. A linear correlation (r² = 0.9989) between the Hammett's substituent constants σ and nucleophilicity parameters N of 4‐X‐substituted anilines in acetonitrile has been observed. The electrophilicity parameters E of the olefin 1 is evaluated, using the correlations σ versus N and log k versus σ and compared with the electrophilicities of analogously Michael acceptors.     

The peptide (Z)‐Pro–Leuol

The structure of the synthetic protected dipeptide (Z)‐Pro–Leuol [systematic name: benzyl 2‐(1‐hydroxy­methyl‐3‐methyl­butyl­amino­carbonyl)­pyrrolidine‐1‐carboxyl­ate], C₁₉H₂₈N₂O₄, was determined by X‐ray crystallography. The peptide adopts a novel backbone conformation compared with other longer oligopeptides containing Pro–Leuol.     

Reaction of 4‐benzylidene‐2‐methyl‐5‐oxazolone with amines,Part 2: Influence of substituents in para‐position in the phenyl ring and a substituent on amine nitrogen atom on the reaction kinetics

An influence of a structure of the amine (benzylamine, N‐methyl‐benzylamine, N‐isopropyl‐benzylamine, N‐methyl‐butylamine, N‐ethyl‐butylamine, sec‐butylamine, and tert‐butylamine) on a rate constant of the ring‐opening reaction of 4‐benzylidene‐2‐methyl‐5‐oxazolone (Ox) was studied. The good correlation between logarithm of the rate constants and Charton's steric substituent constant ν as well as good correlation with a form of the simple branching equation indicate that there is a steric effect because of substitution at C1 carbon atom of nucleophile which decreases the reaction rate. Additionally, an influence of a structure of the benzylidene moiety of Ox on a rate of the oxazolone ring‐opening reaction was studied. The substituents (? OH, ? OCH₃, ? N(CH₃)₂, ? Cl, ? NO₂) in para‐position of the phenyl ring of Ox substantially modified the rate of the reaction with benzylamine in acetonitrile. The rate of the Ox ring‐opening reaction decreased with increase of the electron‐donating properties of the substituent. A good correlation between the rate constants of the reaction of 4‐(4′‐substituted‐benzylidene)‐2‐methyl‐5‐oxazolones with benzylamine and the electron density at the reaction center (carbon C5 of the oxazolone ring), calculated using ab initio method, and the Hammett substituent constants, and CR equation were established. © 2002 Wiley Periodicals, Inc. Int J Chem Kinet 34: 148–155, 2002; DOI 10.1002/kin.10039     

Iron‐Promoted ortho‐ and/or ipso‐Hydroxylation of Benzoic Acids with H2O2

Regioselective hydroxylation of aromatic acids with hydrogen peroxide proceeds readily in the presence of iron(II) complexes with tetradentate aminopyridine ligands [Fe^II(BPMEN)(CH₃CN)₂](ClO₄)₂ ( 1 ) and [Fe^II(TPA)(CH₃CN)₂](OTf)₂ ( 2 ), where BPMEN=N,N′‐dimethyl‐N,N′‐bis(2‐pyridylmethyl)‐1,2‐ethylenediamine, TPA=tris‐(2‐pyridylmethyl)amine. Two cis‐sites, which are occupied by labile acetonitrile molecules in 1 and 2 , are available for coordination of H₂O₂ and substituted benzoic acids. The hydroxylation of the aromatic ring occurs exclusively in the vicinity of the anchoring carboxylate functional group: ortho‐hydroxylation affords salicylates, whereas ipso‐hydroxylation with concomitant decarboxylation yields phenolates. The outcome of the substituent‐directed hydroxylation depends on the electronic properties and the position of substituents in the molecules of substrates: 3‐substituted benzoic acids are preferentially ortho‐hydroxylated, whereas 2‐ and, to a lesser extent, 4‐substituted substrates tend to undergo ipso‐hydroxylation/decarboxylation. These two pathways are not mutually exclusive and likely proceed via a common intermediate. Electron‐withdrawing substituents on the aromatic ring of the carboxylic acids disfavor hydroxylation, indicating an electrophilic nature for the active oxidant. Complexes 1 and 2 exhibit similar reactivity patterns, but 1 generates a more powerful oxidant than 2 . Spectroscopic and labeling studies exclude acylperoxoiron(III) and Fe^IV?O species as potential reaction intermediates, but strongly indicate the involvement of an Fe^III? OOH intermediate that undergoes intramolecular acid‐promoted heterolytic O? O bond cleavage, producing a transient iron(V) oxidant.     

Covalent supporting of novel dioxo‐molybdenum tetradentate pyrrole‐imine complex on Fe3O4 as high‐efficiency nanocatalyst for selective epoxidation of olefins

A novel Mo(VI) tetradentate Schiff base complex based on two pyrrole‐imine donors was anchored covalently on Fe₃O₄ nanoparticles and characterized using physicochemical techniques. The catalytic epoxidation process was optimized in terms of the effects of solvent, reaction temperature, kind of oxidant and amount of oxidant and catalyst. Then the novel heterogeneous nanocatalyst was used for the efficient and selective catalytic epoxidation of internal alkenes (cyclohexene, cyclooctene, α‐pinene, indene and trans ‐1,2‐diphenylethene) and terminal alkenes (n ‐heptene, n ‐octene, n ‐dodecene and styrene) using tert ‐butyl hydroperoxide (70% in water) as oxidant in 1,2‐dichloroethane as solvent. The prepared nanocatalyst is very effective for the selective epoxidation of cis ‐cyclooctene with 100% conversion, 100% selectivity and turnover frequency of 1098 h⁻¹ in just 30 min. The magnetic nanocatalyst was easily recovered using an external magnetic field and was used subsequently at least six times without significant decrease in conversion.     

Temperature Dependence of Interactions Between Stable Piperidine‐1‐yloxyl Derivatives and a Semicrystalline Ionic Liquid

The stable 2,2,6,6‐tetramethylpiperidine‐1‐yloxyl and its derivatives with hydrogen‐bond‐forming (‐OH, ‐OSO₃H), anionic (‐OSO₃^? bearing K⁺ or [K(18‐crown‐6)]⁺ as counter ion), or cationic (‐N⁺(CH₃)₃ bearing I^?, BF₄^?, PF₆^? or N^?(SO₂CF₃)₂ as counter ion) substituents are investigated in 1‐butyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide over a wide temperature range. The temperature dependence of the viscosity of the ionic liquid is well described by the Vogel–Fulcher–Tammann equation. Interestingly, the temperature dependence of the rotational correlation time of the spin probes substituted with either a hydrogen‐bond‐forming group or an ionic substituent can be described using the Stokes–Einstein equation. In contrast, the temperature dependence of the rotational correlation time of the spin probe without an additional substituent at the 4‐position to the nitroxyl group does not follow this trend. The activation energy for the mobility of the unsubstituted spin probe, determined from an Arrhenius plot of the spin‐probe mobility in the ionic liquid above the melting temperature, is comparable with the activation energy for the viscous flow of the ionic liquid, but is higher for spin probes bearing an additional substituent at the 4‐position. Quantum chemical calculations of the spin probes using the 6‐31G+d method give information about the rotational volume of the spin probes and the spin density at the nitrogen atom of the radical structure as a function of the substituent at the spin probes in the presence and absence of a counter ion. The results of these calculations help in understanding the effect of the additional substituent on the experimentally determined isotropic hyperfine coupling constant.     

Hydride transfer reactions via ion–neutral complex: fragmentation of protonated N‐benzylpiperidines and protonated N‐benzylpiperazines in mass spectrometry

An ion‐neutral complex (INC)‐mediated hydride transfer reaction was observed in the fragmentation of protonated N‐benzylpiperidines and protonated N‐benzylpiperazines in electrospray ionization mass spectrometry. Upon protonation at the nitrogen atom, these compounds initially dissociated to an INC consisting of [RC₆H₄CH₂]⁺ (R = substituent) and piperidine or piperazine. Although this INC was unstable, it did exist and was supported by both experiments and density functional theory (DFT) calculations. In the subsequent fragmentation, hydride transfer from the neutral partner to the cation species competed with the direct separation. The distribution of the two corresponding product ions was found to depend on the stabilization energy of this INC, and it was also approved by the study of substituent effects. For monosubstituted N‐benzylpiperidines, strong electron‐donating substituents favored the formation of [RC₆H₄CH₂]⁺, whereas strong electron‐withdrawing substituents favored the competing hydride transfer reaction leading to a loss of toluene. The logarithmic values of the abundance ratios of the two ions were well correlated with the nature of the substituents, or rather, the stabilization energy of this INC. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthese von neuen (Phenylalkyl)aminen zur Untersuchung von Struktur–Aktivitätsbeziehungen. Mitteilung 2

Synthesis of Novel (Phenylalkyl)amines for the Investigation of Structure–Activity Relationships. Part 2¹). 4‐Thio‐Substituted [2‐(2,5‐Dimethoxyphenyl)ethyl]amines (=2,5‐Dimethoxybenzeneethanamines) The 4‐substituted [2‐(2,5‐dimethoxyphenyl)ethyl]amines (=2,5‐dimethoxybenzeneethanamines) and its α‐methyl analogs are known to act as potent 5‐HT_2A/C ligands, which have, depending on their 4‐substituent, agonistic or antagonistic character. Generally, compounds with a small lipophilic substituent typically are agonists and those with a larger lipophilic substituent predominantly antagonists or at least partial agonists. Since little is known about the transition and more information is needed about the structural requirements of the 4‐substituent to control the functional activity, 12 novel 4‐thio‐substituted [2‐(2,5‐dimethoxyphenyl)ethyl]amines were synthesized and spectroscopically characterized. Thus 2,5‐dimethoxybenzenethiol ( 7 ) was converted to the thioether derivatives 8a – l with several alkyl, fluoroalkyl, alkenyl, and benzyl halides. Subsequent Vilsmeier‐formylation afforded the benzaldehydes 9a – l , condensation with MeNO₂ the nitroethenyl derivatives 10a – l , and reduction with AlH₃ the desired (2‐phenylethyl)amines 11a – l .