ZP4, an improved neuronal Zn2+ sensor of the Zinpyr family

A second-generation fluorescent sensor for Zn(2+) from the Zinpyr family, ZP4, has been synthesized and characterized. ZP4 (Zinpyr-4, 9-(o-carboxyphenyl)-2-chloro-5-[2-(bis(2-pyridylmethyl)aminomethyl)-N-methylaniline]-6-hydroxy-3-xanthanone) is prepared via a convergent synthetic strategy developed from previous studies with these compounds. ZP4, like its predecessors, has excitation and emission wavelengths in the visible range ( approximately 500 nm), a dissociation constant (K(d)) for Zn(2+) of less than 1 nM and a high quantum yields (Phi = approximately 0.4), making it well suited for biological applications. A 5-fold fluorescent enhancement is observed under simulated physiological conditions corresponding to the binding of the Zn(2+) cation to the sensor, which inhibits a photoinduced electron transfer (PET) quenching pathway. The metal-binding stereochemistry of ZP4 was evaluated through the synthesis and X-ray structural characterization of [M(BPAMP)(H(2)O)(n)](+) complexes, where BPAMP is [2-(bis(2-pyridylmethyl)aminomethyl)-N-methylaniline]-phenol and M = Mn(2+), Zn(2+) (n = 1) or Cu(2+) (n = 0).     

Highly effective fluorescent and colorimetric sensors for pyrophosphate over H2PO4- in 100% aqueous solution

[Structure: see text]. This study demonstrated that Zinpyr-1*Zn2+ acts as a fluorescent and colorimetric sensor for pyrophosphate at pH 7.4. In addition, Zinpyr-1*Cu2+ and DIARB-1*Cu2+ complexes were found to act as selective fluorescent sensors for pyrophosphate. Furthermore, the chemosensors Zinpyr-1*Zn2+ and Zinpyr-1*Cu2+ show highly selective and ratiometric fluorescence changes for pyrophosphate compared with H2PO4-.     

The zinspy family of fluorescent zinc sensors: syntheses and spectroscopic investigations

Four fluorescent sensors designed for Zn(II) detection that contain a fluorescein reporting group and a pyridyl-amine-thioether derivatized ligand moiety were prepared and their photophysical properties characterized. These "Zinspy" sensors are water soluble and generally display approximately 1.4- to approximately 4.5-fold fluorescence enhancement upon Zn(II) coordination, depending upon fluorescein halogenation and the number and nature of the zinc-binding appendages. The Zinspy sensors exhibit improved selectivity for zinc compared to the di-(2-picolyl)amine-based Zinpyr family.     

Substituent-dependent fluorescent sensors for zinc ions based on carboxamidoquinoline

A series of carboxamidoquinoline-based fluorescent sensors (the AQZ family) were synthesized and characterized. The AQZ family members were highly soluble in water and showed good selectivity for Zn(2+)via enhanced fluorescence in aqueous buffer solution. Fluorescence signals could be tuned from dual-wavelength ratiometric changes to changes in the intensity of a single wavelength upon binding Zn(2+) through the introduction of different substituents onto the quinoline ring. Concentrations of free Zn(2+) of 10(-5)-10(-6) M could be detected using the sensors. Changes of substituents and their positions on the quinoline ring influenced the sensitivity for Zn(2+), but had little effect on Zn(2+) affinities.     

The rhodafluor family. An initial study of potential ratiometric fluorescent sensors for Zn2+

A new class of ratiometric Zn(2+) sensors that employ a hybrid fluorescein and rhodamine fluorophore has been designed, and two members of the rhodafluor family of sensors, RF1 and RF2, have been synthesized. The preparation of RF1 (9-(o-carboxyphenyl)-2-chloro-6-[bis(2-pyridylmethyl)amino]-3-xanthanone, Rhodafluor-1), uses conventional synthetic methods. Elaboration of the RF1 synthesis in an effort to enhance the Zn(2+) affinity was unsuccessful, so palladium-catalyzed aryl amination was applied to prepare RF2 (1-[9'-(o-carboxyphenyl)-6'-amino-2'-chloro-3'-xanthanone]-4,10-(diethyl)-7-(2-pyridylmethyl)-1,4,7,10-tetraazacyclododecane, Rhodafluor-2). The key step in the synthesis of RF2 is coupling of a triprotected tetraazamacrocycle (cyclen) to 3-bromoanisidine. RF2 binds Zn(2+) with a dissociation constant of 13.5 microM accompanied by an approximately 50% increase in quantum yield. Although only small shifts in absorption wavelength were observed, because protonation of the amino nitrogen atoms of the macrocycle prevents the uncomplexed sensor from adopting the desired mesomer, the intensity doubling makes the probe of value for immediate application in situations where our previous tight binding (<1 nM) sensors are inadequate.     

A highly selective and sensitive in vivo fluorosensor for zinc(II) without cytotoxicity

A highly selective and sensitive fluorescent Zn(2+) sensor, 2,6-bis(2-hydroxy-benzoic acid hydrazide)-4-methylphenol (1), was designed and synthesized. In aqueous THF (4 : 6 v/v) ligand 1 induces a 2 : 1 complex formation with respect to Zn(2+) at physiological pH. This probe features visible light excitation(390 nm) and emission (490 nm) profiles, excellent selectivity responses for Zn(2+)over other competing biological metal ions with K(d) < 1 pM(2), LOD < 1 ng L(-1) and about 680 fold enhancement in fluorescent intensity upon Zn(2+) binding. It also exhibits cell permeability and intracellular Zn(2+) sensing in A375 human melanoma cancer cell.     

Esterase-activated two-fluorophore system for ratiometric sensing of biological zinc(II)

Intracellular ester hydrolysis by cytosolic esterases is a common strategy used to trap fluorescent sensors within the cell. We have prepared analogues of Zinpyr-1 (ZP1), an intensity-based fluorescent sensor for Zn2+, that are linked via an amido-ester or diester moiety to a calibrating fluorophore, coumarin 343. These compounds, designated Coumazin-1 and -2, are nonpolar and are quenched by intramolecular interactions between the two fluorophores. Esterase-catalyzed hydrolysis generates a Zn2+-sensitive ZP1-like fluorophore and a Zn2+-insensitive coumarin as a calibrating fluorophore. Upon excitation of the fluorophores, coumarin 343 emission relays information concerning sensor concentration whereas ZP1 emission indicates the relative concentration of Zn2+-bound sensor. This approach enables intracellular monitoring of total sensor concentration and provides a ratiometric system for sensing biological zinc ion.     

Design and synthesis of a novel magnetic resonance imaging contrast agent for selective sensing of zinc ion

A series of new diethylenetriaminepentaacetic acid (DTPA)-bisamide chelators has been prepared and characterized for application as zinc sensors. We have designed and synthesized (GdL(a))(2-), which contains a DTPA-bisamide moiety. The R(1) relaxivity of (GdL(a))(2-) solution decreased monotonically on the addition of Zn(2+). Moreover, (GdL(a))(2-) showed high selectivity for Zn(2+) against Ca(2+) and Mg(2+). We also measured the UV-visible spectra and the coldspray ionization (CSI) MS spectra and concluded that the 1-to-1 Zn(2+) complex of (GdL(a))(2-) is stable at higher concentrations of Zn(2+). These complexes should provide the basis for creating a superior Zn(2+)-sensitive MRI contrast agent and are excellent candidates for incorporation into sensors designed for selective detection of Zn(2+) in biological applications.     

Aroylhydrazone derivative as fluorescent sensor for highly selective recognition of Zn2+ ions: syntheses, characterization, crystal structures and spectroscopic properties

A new Zn(2+) fluorescent chemosensor N'-(3,5-di-tert-butylsalicylidene)-2-hydroxybenzoylhydrazine (H(3)L(1)) and its complexes [Zn(HL(1))C(2)H(5)OH](∞) (1) and [Cu(HL(1))(H(2)O)]CH(3)OH (2) have been synthesized and characterized in terms of their crystal structures, absorption and emission spectra. H(3)L(1) displays high selectivity for Zn(2+) over Na(+), K(+), Mg(2+), Ca(2+) and other transition metal ions in Tris-HCl buffer solution (pH = 7.13, EtOH-H(2)O = 8?:?2 v/v). To obtain insight into the relation between the structure and selectivity, a similar ligand 3,5-di-tert-butylsalicylidene benzoylhydrazine (H(2)L(2)), which lacks the hydroxyl group substituent in salicyloyl hydrazide compared with H(3)L(1), and its complex [Zn(2)(HL(2))(2)(CH(3)COO)(2)(C(2)H(5)OH)] (3), [Co(L(2))(2)][Co(DMF)(4)(C(2)H(5)OH)(H(2)O)] (4), [Fe(HL(2))(2)]Cl·2CH(3)OH (5), have also been investigated as a reference. H(3)L(1) exhibits improved selectivity for Zn(2+) compared to H(2)L(2). The findings indicate that the hydroxyl group substituent exerts an effect on the spectroscopic properties, complex structures and selectivity of the fluorescent sensor.     

Structure and spectral properties of dinuclear zinc complex containing semicarbazonate ligands

The dinuclear Zn(2+) complex [Zn(HSSC)OAc](2)·2DMF (H(2)SSC=salicylaldehyde semicarbazone; HOAc=acetic acid; DMF=N,N-dimethylfomamide) was prepared and structurally characterized by single crystal X-ray. The basic structural unit of the complex is a dinuclear complex [Zn(HSSC)OAc](2) in which the semicarbazone ligand adopts the phenol-imine form. The deprotonated phenol group forms a one-atom bridge between the two zinc centers, and both of the zinc centers are five-coordinated. The local coordination environment of Zn(2+) can be approximately considered as square pyramidal. UV spectral studies show that the H(2)SSC provides strong binding of Zn(2+) in a 1:1 ratio in solution. The conditional binding constant of the complex is lgK(Zn-L)=12.89±0.76 in 0.05M Tris-HCl buffer at pH 7.4. The H(2)SSC exhibits an enhanced fluorescence effect by the addition of Zn(2+), and affords an excellent selectivity for Zn(2+) under physiological conditions.     

Membrane-permeable and -impermeable sensors of the Zinpyr family and their application to imaging of hippocampal zinc in vivo

Esterification of fluorescent biosensors is a common strategy used to trap probes within the cell. Zinpyr-1 (ZP1) is a fluorescein-based bright fluorescent sensor for divalent zinc that is cell permeable without prior modification. We describe here the synthesis and characterization of ZP1 sensors containing a carboxylic acid or ethyl ester functionality at the 5 or 6 position of the fluorescein. The presence of an electronegative carboxylate decreases the proton-induced background fluorescence of the probe by lowering the pKa of the benzylic amines responsible for fluorescence quenching. The charged species ZP1(6-CO2-) is membrane-impermeant, whereas the permeability of the neutral ZP1(5/6-CO2Et) is similar to that of the parent sensor. Intracranial microinfusion of ZP1(6-CO2Et) into rat hippocampus produces reduced staining of vesicular zinc in neuropil and very clear delineation of zinc-positive injured neuronal somata and dendrites as compared with ZP1.     

Modular and tunable chemosensor scaffold for divalent zinc

A modular peptide scaffold has been developed for fluorescent sensing of divalent zinc. The signaling component of the chemosensor is the chelation-sensitive fluorophore 8-hydroxy-5-(N,N-dimethylsulfonamido)-2-methylquinoline, which is prepared as the protected amino acid derivative Fmoc-Sox-OH and integrated into peptide sequences. Nineteen synthetic peptides incorporating the signaling element exhibit a range of affinities for Zn(2+) through variation of the type and number of Zn(2+) ligands, ligand arrangement and the beta-turn sequence that acts as a preorganization element between the ligands. The stoichiometry of the peptide-Zn(2+) complexes is evaluated by several criteria. The fluorescence response of these peptides to pH and various important metal ions is reported. Eleven of these sequences form only 1:1 complexes with Zn(2+) and their affinities range from 10 nM to nearly 1 microM. When used in concert, these sensors can provide Zn(2+) concentration information in a valuable range.     

TSQ (6-methoxy-8-p-toluenesulfonamido-quinoline), a common fluorescent sensor for cellular zinc, images zinc proteins

Zn(2+) is a necessary cofactor for thousands of mammalian proteins. Research has suggested that transient fluxes of cellular Zn(2+) are also involved in processes such as apoptosis. Observations of Zn(2+) trafficking have been collected using Zn(2+) responsive fluorescent dyes. A commonly used Zn(2+) fluorophore is 6-methoxy-8-p-toluenesulfonamido-quinoline (TSQ). The chemical species responsible for TSQ's observed fluorescence in resting or activated cells have not been characterized. Parallel fluorescence microscopy and spectrofluorometry of LLC-PK(1) cells incubated with TSQ demonstrated punctate staining that concentrated around the nucleus and was characterized by an emission maximum near 470 nm. Addition of cell permeable Zn-pyrithione resulted in greatly increased, diffuse fluorescence that shifted the emission peak to 490 nm, indicative of the formation of Zn(TSQ)(2). TPEN (N,N,N'N'-tetrakis(-)[2-pyridylmethyl]-ethylenediamine), a cell permeant Zn(2+) chelator, largely quenched TSQ fluorescence returning the residual fluorescence to the 470 nm emission maximum. Gel filtration chromatography of cell supernatant from LLC-PK(1) cells treated with TSQ revealed that TSQ fluorescence (470 nm emission) eluted with the proteome fractions. Similarly, addition of TSQ to proteome prior to chromatography resulted in 470 nm fluorescence emission that was not observed in smaller molecular weight fractions. It is hypothesized that Zn-TSQ fluorescence, blue-shifted from the 490 nm emission maximum of Zn(TSQ)(2), results from ternary complex, TSQ-Zn-protein formation. As an example, Zn-carbonic anhydrase formed a ternary adduct with TSQ characterized by a fluorescence emission maximum of 470 nm and a dissociation constant of 1.55 × 10(-7) M. Quantification of TSQ-Zn-proteome fluorescence indicated that approximately 8% of cellular Zn(2+) was imaged by TSQ. These results were generalized to other cell types and model Zn-proteins.     

Analogues of Zinpyr-1 provide insight into the mechanism of zinc sensing

Three compounds structurally related to the fluorescent zinc sensor Zinpyr-1 (ZP1) have been synthesized and characterized. In each of these ZinAlkylPyr (ZAP) analogues, an alkyl group (methyl, benzyl) replaces one of the metal-binding picolyl moieties in ZP1. The methyl-for-picolyl substitutions in ZAP1 and ZAP2 have a negligible effect on the optical spectrum of the fluorophore but elevate the quantum yields (Phi = 0.82 (ZAP1), 0.74 (ZAP2)) to values near that of Zn2+-saturated ZP1 (Phi = 0.92). The benzyl-for-picolyl substitution in ZAP3 similarly enhances the quantum yield (Phi = 0.52) relative to that of metal-free ZP1 (Phi = 0.38). As previously observed for methylated ZP1 sensors, methylation of the 6-position of the pyridyl ring diminishes the emission by lowering both the molar extinction coefficient and the quantum yield. Although these new ZAP compounds cannot detect Zn2+ fluorimetrically at neutral pH, complexation of Zn2+ does occur, as evidenced by sizable changes in the optical spectra. The ZAP1-3 probes can detect Zn2+ fluorimetrically at pH 9, indicating that proton-induced background emission obscures any Zn2+-induced fluorescence at pH 7. The tertiary amine groups in ZAP1-3 are less basic than those in ZP1, which implies that the additional pyridine rings are responsible for the emissive response to Zn2+ at pH 7.0.     

Calix[4]arene-based 1,3-diconjugate of salicylyl imine having dibenzyl amine moiety (L): synthesis, characterization, receptor properties toward Fe2+, Cu2+, and Zn2+, crystal structures of its Zn2+ and Cu2+ complexes, and selective phosphate sensing by the [ZnL

A calix[4]arene conjugate bearing salicylyl imine having dibenzyl moiety (L) has been synthesized and characterized, and its ability to recognize three most important essential elements of human system, viz., iron, copper, and zinc, has been addressed by colorimetry and fluorescence techniques. L acts as a sensor for Cu(2+) and Fe(2+) by exhibiting visual color change and for Zn(2+) based on fluorescence spectroscopy. L shows a minimum detection limit of 3.96 ± 0.42 and 4.51 ± 0.53 ppm and 45 ± 4 ppb, respectively, toward Fe(2+), Cu(2+), and Zn(2+). The in situ prepared [ZnL] exhibits phosphate sensing among 14 anions studied with a detection limit of 247 ± 25 ppb. The complexes of Zn(2+), Cu(2+), and Fe(2+) of L have been synthesized and characterized by different techniques. The crystalline nature of the zinc and copper complexes and the noncrystalline nature of simple L and its iron complex have been demonstrated by powder XRD. The structures of Cu(2+) and Zn(2+) complexes have been established by single crystal XRD wherein these were found to be 1:1 monomeric and 2:2 dimeric, respectively, using N(2)O(2) as binding core. The geometries exhibited by the Zn(2+) and the Cu(2+) complexes were found to be distorted tetrahedral and distorted square planar, respectively. The iron complex of L exists in 1:1 stoichiometry as evident from the mass spectrometry and elemental analysis.     

Anion detection by fluorescent Zn(II) complexes of functionalized polyamine ligands

The Zn(2+) coordination chemistry and luminescent behavior of two ligands constituted by an open 1,4,7-triazaheptane chain functionalized at both ends with 2-picolyl units and either a methylnaphthyl (L1) or a dansyl (L2) fluorescent unit attached to the central amino nitrogen are reported. The fluorescent properties of the ZnL1(2+) and ZnL2(2+) complexes are then exploited toward detection of anions. L1 in the pH range of study has four protonation constants. The fluorescence emission from the naphthalene fluorophore is quenched either at low or at high pH values leading to an emissive pH window centered around pH = 5. In contrast, in L2 the fluorescence emission from the dansyl unit occurs only at basic pH values. In the case of L1, a red-shifted band appearing in the visible region was assigned to an exciplex emission involving the naphthalene and the tertiary amine of the polyamine chain. L1 forms Zn(2+) mononuclear complexes of ZnH(p)L1((p+2)+) stoichiometry with p = 1, 0, -1. Formation of the ZnL1(2+)species produces a strong enhancement of the L1 luminescence leading to an extended emissive pH window from pH = 5 to pH = 9. Addition of several anions to this last complex leads to a partial quenching effect. On the contrary, the fluorescence emission of L2 is partially quenched upon complexation with Zn(2+) in the same pH window (5 < pH < 9). The lower stability of ZnL2(2+) with respect to ZnL1(2+) suggests a lack of involvement of the sulfonamide group in the first coordination sphere. However, there is spectral evidence for an interesting photoinduced binding of the sulfonamide nitrogen to Zn(2+). While addition of diphosphate, triphosphate, citrate, and D,L-isocitrate to a solution of ZnL2(2+) restores the fluorescence emission of the system (lambda max ca. 600 nm), addition of phosphate, chloride, iodide, and cyanurate do not produce any significant change in fluorescence. Moreover, this system would permit one to differentiate diphosphate and triphosphate over citrate and d, l-isocitrate because the fluorescence enhancement observed upon addition of the first anions is much sharper. The ZnL2(2+) complex and its mixed complexes with diphosphate, triphosphate, citrate, and D,L-isocitrate have been characterized by (1)H, (31)P NMR, and Electrospray Mass Spectrometry.     

A Zn2+-specific turn-on fluorescent probe for ratiometric sensing of pyrophosphate in both water and blood serum

A novel fluorescent sensor composed of a naphthalene functionalized tetraazamacrocycle ligand 3,6,9,15-tetraazabicyclo[9.3.1]pentadeca-1(15),11,13-triene-3-methyl naphthalene (1) and Zn(2+) has been designed and prepared, which can be utilized for selective and ratiometric sensing of pyrophosphate (PPi) over other phosphate-containing anions in aqueous solution at physiological pH. Notably, the water soluble 1 itself also exhibits a selective enhanced fluorescent response to Zn(2+), and the complex 1-Zn(2+) thus formed eventually fulfils the synergic Zn(2+) coordination-altered strategy with PPi. Furthermore, the ratiometric sensing of 1-Zn(2+) towards PPi performed well even in blood serum milieu. Finally, the sensor 1-Zn(2+) was successfully employed to monitor a real-time assay of inorganic pyrophosphatase (PPase) by means of ratiometric fluorescent measurements for the first time.     

A highly selective fluorescent chemosensor for zinc ion and imaging application in living cells

A new 2,6-bis(5,6-dihydrobenzo[4,5]imidazo[1,2-c]quinazolin-6-yl)-4-methylphenol (1) serves as a highly selective and sensitive fluorescent probe for Zn(2+) in a HEPES buffer (50 mM, DMSO:water = 1:9 (v/v), pH = 7.2) at 25 °C. The increase in fluorescence in the presence of Zn(2+) is accounted for by the formation of dinuclear Zn(2+) complex [Zn(2)(C(35)H(25)N(6)O)(OH)(NO(3))(2)(H(2)O)] (2), characterized by X-ray crystallography. The fluorescence quantum yield of the chemosensor 1 is only 0.019, and it increases more than 12-fold (0.237) in the presence of 2 equiv of the zinc ion. Interestingly, the introduction of other metal ions causes the fluorescence intensity to be either unchanged or weakened. By incubation of cultured living cells (A375 and HT-29) with the chemosensor 1, intracellular Zn(2+) concentrations could be monitored through selective fluorescence chemosensing.     

ZP8, a neuronal zinc sensor with improved dynamic range; imaging zinc in hippocampal slices with two-photon microscopy

The synthesis of a difluorofluorescein monocarboxaldehyde platform and its use for preparing ZP8, a new member of the Zinpyr family of neuronal Zn(2+) sensors, are described. By combining an aniline photoinduced electron transfer (PET) switch and an electron-withdrawing fluorescein scaffold, ZP8 displays reduced background fluorescence and improved dynamic range compared to previous ZP probes. The bright sensor undergoes an 11-fold increase in fluorescence intensity upon Zn(2+) complexation (Phi = 0.03-0.35) with high selectivity over cellular concentrations of Ca(2+) and Mg(2+). In addition, sensors in the ZP family have been utilized for optical imaging in biological samples using two-photon microscopy (TPM). The cell-permeable ZP3 probe is capable of identifying natural pools of labile Zn(2+) within the mossy fiber synapses of live hippocampal slices using TPM, establishing the application of this technique for monitoring endogenous Zn(2+) stores.     

A novel,cell-permeable,fluorescent probe for ratiometric imaging of zinc ion

Zn(2+) plays important roles in various biological systems; as a result, the development of tools that can visualize chelatable Zn(2+) has attracted much attention recently. We report here newly synthesized fluorescent sensors for Zn(2+), ZnAF-Rs, whose excitation maximum is shifted by Zn(2+) under physiological conditions. Thus, these sensors enable ratiometric imaging, which is a technique to reduce artifacts by minimizing the influence of extraneous factors on the fluorescence of a probe. Ratiometric measurement can provide precise data, and some probes allow quantitative detection. ZnAF-Rs are the first ratiometric fluorescent sensors for Zn(2+) that enable quantitative analysis under physiological conditions. ZnAF-Rs also possess suitable K(d) for applications, and high selectivity against other biologically relevant cations, especially Ca(2+). Using these probes, changes of intracellular Zn(2+) concentration in cultured cells were monitored successfully. We believe that these probes will be extremely useful in studies on the biological functions of Zn(2+).