An improved sodium dodecyl sulfate-polyacrylamide gel electrophoresis system for the analysis of membrane protein complexes

Membrane protein complexes such as the reaction center complexes of oxygenic photosynthesis or the complex I of mitochondira are composed of many subunit polypeptides. To analyze their polypeptide compositions by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE), a wide range of molecular sizes has to be resolved, especially in the low molecular mass range. We have improved the traditional Tris/HCI buffer systems adopting a Tris/2-(N-morpholino)ethanesulfonic acid (MES) buffer system containing 6 M urea. This gel system was used with an 18-24% acrylamide gradient for the separation of polypeptides with molecular masses from below 5 kDa to over 100 kDa. This buffer system can also be applied to the usual uniform concentration of acrylamide gel and also to minislab gels.     

Simultaneous electrophoretic analysis of proteins of very high and low molecular mass using Tris‐acetate polyacrylamide gels

To separate and analyze giant and small proteins in the same electrophoresis gel, we have used a 3–15% polyacrylamide gradient gel containing 2.6% of the crosslinker bisacrylamide and 0.2 M of Tris‐acetate buffer (pH 7.0). Samples were prepared in a sample buffer containing lithium dodecyl sulphate and were run in the gel described above using Tris‐Tricine‐SDS‐sodium bisulfite buffer, pH 8.2, as electrophoresis buffer. Here, we show that this system can be successfully used for general applications of SDS‐PAGE such as CBB staining and immunoblot. Thus, by using Tris‐acetate 3–15% polyacrylamide gels, it is possible to simultaneously analyze proteins, in the mass range of 10–500 kDa, such as HERC1 (532 kDa), HERC2 (528 kDa), mTOR (289 kDa), Clathrin heavy chain (192 kDa), RSK (90 kDa), S6K (70 kDa), β‐actin (42 kDa), Ran (24 kDa) and LC3 (18 kDa). This system is highly sensitive since it allows detection from as low as 10 μg of total protein per lane. Moreover, it has a good resolution, low cost, high reproducibility and allows for analysis of proteins in a wide range of weights within a short period of time. All these features together with the use of a standard electrophoresis apparatus make the Tris‐acetate‐PAGE system a very helpful tool for protein analysis.     

Analysis of E. coli soluble proteins by non‐denaturing micro 2‐DE/3‐DE and MALDI‐MS‐PMF

Escherichia coli (strain K‐12)‐soluble proteins were analyzed by nondenaturing micro 2‐DE and MALDI‐MS‐PMF. The reported conditions of nondenaturing IEF in agarose column gels [Jin, Y., Manabe, T., Electrophoresis 2009, 30, 939–948] were modified to optimize the resolution of cellular soluble proteins. About 300 CBB‐stained spots, the apparent molecular masses of which ranged from ca. 6000 to 10 kDa, were detected. All the spots on two reference 2‐DE gels (one for wide mass range and one for low‐molecular‐mass range) were numbered and subjected to MALDI‐MS‐PMF for the assignment of constituting polypeptides. Most of the spots (310 spots out of 329) provided significant match (p<0.05) with polypeptides in Swiss‐Prot database and totally 228 polypeptide species were assigned. Activity staining of enzymes such as alkaline phosphatase and catalases was performed on the 2‐DE gels and the locations of the activity spots matched well with those of the MS‐assigned polypeptides of the enzymes. Most of the polypeptides with subunit information in Swiss‐Prot (119 polypeptides as homo‐multimers and 25 as hetero‐multimers out of the 228), such as pyruvate dehydrogenase complex which is composed of three enzymatic components, were detected at the apparent mass positions of their polymers, suggesting that the proteins were separated retaining their subunit structures. When a nondenaturing 2‐DE gel was vertically cut into 2 mm strips and one of the strips was subjected to a third‐dimension micro SDS‐PAGE (micro 3‐DE), about 190 CBB‐stained spots were detected. The assignment of the polypeptides separated on the 3‐DE gel would further provide information on protein/polypeptide interactions.     

High-efficiency protein extraction from polyacrylamide gels for molecular mass measurement by matrix-assisted laser desorption/ionization-time of flight-mass spectrometry

A simple and fast method of protein extraction from Coomassie Brilliant Blue (CBB)-stained polyacrylamide gels suited for molecular mass measurement of proteins by matrix-assisted laser desorption/ionization-time of flight-mass spectrometry (MALDI-TOF-MS) is reported. Proteins in CBB-stained gel pieces were extracted by a 10-min soaking in 0.1 M NaOH at 25 degrees C. The recovery of this one-step extraction method was 34-73% for proteins <67 kDa. CBB adduction to proteins during mass spectrometric analysis was avoided by a destaining step before the alkaline extraction. The molecular mass values of the extracted proteins coincided with those of purified proteins within +/-0.01-0.10% deviation for all the proteins <36 kDa. Because of the high extraction recovery, mass measurement was possible for the proteins extracted from CBB-stained gels with loaded protein quantities as little as 34 ng for cytochrome c, alpha-lactalbumin, myoglobin, beta-lactoglobulin, trypsinogen, and carbonic anhydrase (12.4-29.0 kDa), 340 ng for glyceraldehyde-3-phosphate dehydrogenase (35.6 kDa) and albumin (66.3 kDa). This method provides a highly efficient approach to utilize CBB-stained one- or two-dimensional gels for whole protein analysis using MALDI-TOF-MS.     

Electronic gel protein transfer and identification using matrix-assisted laser desorption/ionization-mass spectrometry

An electronic protein transfer technique is described for achieving the rapid and efficient recovery of sodium dodecyl sulfate (SDS)-protein complexes from polyacrylamide gels. This process involves the use of small-dimension capillaries in physical contact with a resolved protein band within the polyacrylamide gel, providing a large potential drop and high electric field strength at the capillary/gel interface. Several factors controlling the electronic protein transfer, including the applied electric field strength, the electrophoresis buffer concentration, and the capillary dimension, are studied to further enhance the use of field-amplification for sample stacking of extracted SDS-protein complexes. As a result of sample stacking, the extracted proteins from a 50 ng gel loading are present in a narrow ( approximately 80 nL) and highly concentrated (0.46 mg/mL or 3.3 x 10(-5) M for cytochrome c) solution plug. Three model proteins with molecular mass ranging from 14 kDa (cytochrome c) to 116 kDa (beta-galactosidase) are stained by Coomassie blue and electrophoretically extracted from gels with protein loadings as low as 50 ng. The capillary format of the electronic protein transfer technique allows direct deposition of extracted proteins onto a matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) target. Various matrices and solvent compositions are evaluated for the analysis of extracted and concentrated SDS-protein complexes using MALDI-MS. The electronic protein transfer technique, when operated under optimized conditions, is demonstrated for the effective (>70% recovery), speedy (less than 5 min), and sensitive MS identification of gel resolved proteins (as low as 50 ng).     

Alkaline extraction of human plasma proteins from nondenaturing micro-2-D gels for protein/polypeptide mass measurement and peptide mass fingerprinting using MALDI-TOF MS

Previously, we have reported a high-efficiency method of protein extraction from CBB-stained polyacrylamide gels for molecular mass measurement with MALDI-TOF MS [1]. In the present work, the alkaline extraction method was applied to CBB-stained 2-DE gels on which human plasma proteins were separated in the absence of denaturant. In order to examine the performance of the method, ten spots with apparent molecular masses (MMapp) in the range of 65 to 1000 kDa were selected and the proteins were extracted from the gel pieces. The extracts were subjected to whole-mass measurement by MALDI-TOF MS, with and without DTT treatment. In addition, the extracts were subjected to in-solution trypsin digestion followed by MALDI-TOF MS and PMF analysis. Successful extraction of proteins from the ten spots, up to MMapp 1000 kDa, has been ascertained by the significant PMF assignment (MASCOT) with high sequence coverage of the respective proteins or polypeptides. When direct mass measurement of the extracted proteins was attempted, three spots in MMapp range 65-100 kDa provided mass peaks. Five spots in MMapp range 150-400 kDa did not give mass peaks of the intact proteins, but showed those of the constituent polypeptides after the DTT treatment. Extraction of proteins prior to trypsin digestion enabled the procedure of PMF analysis to be much simpler than the conventional in-gel digestion method, providing comparable protein scores and sequence coverage. The technique presented here suggests a new strategy for the characterization of proteins separated by nondenaturing 2-DE.     

Effects of high-molecular-mass substrates on protein migration during sodium dodecyl sulfatepolyacrylamide gel electrophoresis

Substrate-sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) has become a popular procedure for the separation and identification of active fractions present in enzyme mixtures due to its relative simplicity. Procedures including high-molecular-mass substrates within the gel, such as starch for identification of amylase activity, and protein substrates, including gelatin, casein, and collagen, for revealing protease activity, have been described. SDS-PAGE separation under denaturing conditions is dependent on the molecular mass of the proteins and on the effective pore size of the gels, the last factor being affected by the inclusion of high-molecular-mass substrates into the polyacrylamide matrix. In order to quantify the effect of the addition of increasing concentrations of such substrates on protein migration, starch, gelatin, and casein were included in gels in which polyacrylamide concentration was kept constant. High-molecular-mass substrates decreased migration of proteins ranging from 6.5 to 205 kDa, although the migration pattern, and thereby the accuracy of the assignation of relative molecular masses to proteins separated on those gels, was practically unaffected. The substitution of glycine, as the carrying ion, by Tricine in denaturing electrophoresis buffer systems resulted in an improvement of the migration of proteins in substrate-containing gels. Results suggested that zymograms including substrates remain a valuable procedure for the separation and the relative molecular mass assignation of active enzyme fractions.     

Recovery of intact proteins from silver stained gels

Silver stained proteins of a wide molecular weight (MW) range (20-116 kDa) were successfully recovered by both electroblot and electroelution. The recovery was demonstrated for nanogram loads of proteins separated by SDS-PAGE and visualized by silver staining methods compatible and incompatible with mass spectrometry (MS). It was shown that the alcohol/acid and glutaraldehyde fixation steps present in a number of staining procedures did not prevent recovery of intact proteins from gels. It was found that the recovery of intact proteins from silver stained gels was substantially increased upon pre-equilibration in a buffer containing the reducing agent, dithiothreitol (DTT). The effect of destaining on the recovery of silver stained proteins was also investigated. Comparable recovery of intact proteins within a wide MW range from silver stained gels with and without destaining step was demonstrated. Recovery of model proteins from gels visualized using silver staining method compatible with MS showed 52 to 76% yield of that from the unstained gel, depending upon method of the transfer. Comparison of the recovery of intact proteins from gels visualized using other staining procedures was also made. The above findings have implications as to the supposed irreversible nature of protein "fixation" inside polyacrylamide matrix, and confirm lack of binding of proteins in the gel to metal silver deposited on its surface. This method has the potential to be suitable for direct characterization of proteins by matrix-assisted laser desorption ionization-mass spectrometry (MALDI-MS) without additional purification steps.     

Agarose gel pore radii are not dependent on the casting buffer.

Previous studies have shown that the apparent pore size of agarose gels is dependent on the buffer in which the gel is cast and run (D.L. Holmes and N.C. Stellwagen, Electrophoresis 1990, 11, 5-15; N.C. Stellwagen and D.L. Holmes, Electrophoresis 1990, 11, 649-652). However, these studies, based on the mobility of DNA restriction fragments, neglected the effect of electroendosmosis. By measuring the mobility of vitamin B12 under various experimental conditions, it is shown here that electroendosmosis is highly buffer-dependent. When the observed mobilities of DNA are corrected for electroendomosis, the apparent pore radii of agarose gels are found to be independent of the casting buffer.     

MALDI analysis of proteins after extraction from dissolvable ethylene glycol diacrylate cross‐linked polyacrylamide gels

Although the extraction of intact proteins from polyacrylamide gels followed by mass spectrometric molecular mass determination has been shown to be efficient, there is room for alternative approaches. Our study evaluates ethylene glycol diacrylate, a cleavable cross‐linking agent used for a new type of dissolvable gels. It attains an ester linkage that can be hydrolyzed in alkali conditions. The separation performance of the new gel system was tested by 1D and 2D SDS‐PAGE using the outer chloroplast envelope of Pisum sativum as well as a soluble protein fraction of human lymphocytes, respectively. Gel spot staining (CBB), dissolving, and extracting were conducted using a custom‐developed workflow. It includes protein extraction with an ammonia–SDS buffer followed by methanol treatment to remove acrylamide filaments. Necessary purification for MALDI‐TOF analysis was implemented using methanol–chloroform precipitation and perfusion HPLC. Both cleaning procedures were applied to several standard proteins of different molecular weight as well as ‘real’ biological samples (8–75 kDa). The protein amounts, which had to be loaded on the gel to detect a peak in MALDI‐TOF MS, were in the range of 0.1 to 5 μg, and the required amount increased with increasing mass.     

Characterization of dynamic and steady-state protein phosphorylation using a fluorescent phosphoprotein gel stain and mass spectrometry

Protein phosphorylation plays a vital role in the regulation of most aspects of cellular activity, being key to propagating messages within signal transduction pathways and to modulating protein function. Pro-Q Diamond phosphoprotein gel stain is suitable for the fluorescence detection of phosphoserine-, phosphothreonine-, and phosphotyrosine-containing proteins directly in sodium dodecyl sulfate (SDS)-polyacrylamide gels. The technology is especially appropriate for profiling steady-state and dynamic phosphorylation on a proteome-wide scale, as demonstrated through detection of the native phosphorylation of cardiac mitochondrial phosphoproteins and changes in this profile arising from the activity of a protein kinase. For example, Pro-Q Diamond phosphoprotein gel stain was employed to demonstrate that among the 46 subunits of the mitochondrial respiratory chain complex, NADH:ubiquinone oxidoreductase (complex I), a 42 kDa subunit is phosphorylated in the steady-state. However, exposure of mitochondria to cAMP-dependent protein kinase increases phosphorylation of this 42 kDa subunit and results in de novo phosphorylation of an 18 kDa subunit as well. Since Pro-Q Diamond dye binds to phosphorylated residues noncovalently, the staining technology is fully compatible with modern microchemical analysis procedures, such as peptide mass profiling by matrix assisted laser desorption/ionization-time of flight (MALDI-TOF) mass spectrometry and post-source decay analysis of peptide phosphorylation.     

Ultrathin-layer sodium dodecyl sulfate disc electrophoresis of proteins in the range from 10 to 220 kDa in homogeneous,low-concentrated polyacrylamide gels

This study describes an ultrathin-layer sodium dodecyl sulfate (SDS) disc electrophoresis in polyacrylamide gels of a thickness of only 150 microm. By use of 2-amino-2-methyl-1,3-propanediol/glycine instead of traditional Tris/HCl buffer in the resolving phase of the gel, proteins with a wide range of molecular sizes (10 kDa to over 220 kDa) are separated in unusually low-concentrated gels (4%T, 3.3%C). 2-Amino-2-methyl-1,3-propanediol in the resolving part of the gel contributes to stabilization of the pH value at 8.8, while glycine improves destacking as well as separation of small proteins from the bulk of stacked SDS. This method combines both the advantages of conventional slab-gel electrophoresis and capillary gel electrophoresis. It is easy to apply and well suited for all further miniaturization attempts.     

Identification of Tuber borchii Vittad. mycelium proteins separated by two-dimensional polyacrylamide gel electrophoresis using amino acid analysis and sequence tagging

This paper reports the first results in the proteome analysis of Tuber borchii Vittad. mycelium, an ectomycorrhizal fungus poorly defined genetically, but known for its generation of edible fruit bodies known as white truffles. Employing isoelectric focusing on immobilized pH gradients, followed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis, we obtained an electropherogram presenting over 800 spots within the window of isoelectric points (pI) 3.5-9 and a molecular mass of 10-200 kDa. Different reducing agents were tested in the sample preparation buffers, and the standard lysis buffer plus 2% w/v polyvinylpolypyrrolidone allowed the best solubilization and resolution of the proteins. The T. borchii proteins separated in micropreparative gels were electroblotted onto polyvinylidene difluoride membranes and visualized by Coomassie staining. Twenty-three proteins were excised and analyzed by the combination of amino acid and N-terminal analysis. One protein was identified by matching its amino acid composition, estimated isoelectric point and molecular mass against the SWISS-PROT and EMBL databases. Four spots were successfully tagged by Edman microsequencing but no homologous sequences were found in databases.     

Analysis of protein/polypeptide interactions in human plasma using nondenaturing micro-2-DE followed by 3-D SDS-PAGE and MS

Previously, we have reported on the analysis of human plasma proteins on a nondenaturing micro-2-DE (mu2-DE) gel, using in-gel digestion followed by MALDI-MS and PMF [1]. Many of the spots on the mu2-DE gel showed apparent masses much larger than the calculated masses of their assigned polypeptides, suggesting noncovalent or covalent interactions between the polypeptides. In the present study, we aimed to further analyze the plasma protein spots on a nondenaturing mu2-DE gel, on which protein/polypeptide interactions have been suggested. The proteins in the spots were extracted under alkaline conditions and subjected to 3-D separation using SDS-PAGE in microslab gel format (muSDS gel) with or without the sample treatment of reduction-alkylation. The clear bands in each lane of the muSDS gels demonstrated the successful extraction of proteins from the relevant gel spot and visualized the relative contents of the polypeptides in the spot. Most of the bands were assigned by in-gel digestion followed by MALDI-MS and PMF (MASCOT/Swiss-Prot). The large discrepancy between the apparent mass value of a protein spot and the estimated mass values of the polypeptide bands on a nonreducing muSDS gel strongly suggested noncovalent polypeptide interactions. The differences in the polypeptide separation patterns on the muSDS gels, between with and without the treatment of reduction-alkylation, confirmed polypeptide disulfide bonding. The method employed here, aiming to integrate information on the proteins separated on nondenaturing 2-DE gels with that on the interactions between polypeptides, would help the comprehensive understanding of complex protein systems.     

Capillary column high-performance liquid chromatographic-electrospray ionization triple-stage quadrupole mass spectrometric analysis of proteins separated by two-dimensional polyacrylamide gel electrophoresis application to cerebellar protein mapping

A method is presented for the structural characterization of proteins separated by two-dimensional poly-acrylamide gel electrophoresis (2D-PAGE). The method includes separation of a protein mixture by 2D-PAGE, recovery of proteins from the gel spots revealed by copper staining and analysis of the proteins by triple-stage quadrupole mass spectrometry using an electrospray ionization interface (ESI-TSQMS). Prior to the mass spectrometric analysis, the extracted proteins were passed through a small reversed-phase column (10 × 4.0 mm I.D.) to remove salts and gel-derived contaminants and then introduced into the mass spectrometer through a reversed-phase capillary column with 0.25 mm I.D. Application of the method to the analysis of rat cerebellar proteins suggests that the molecular mass could be accurately determined with sub-picomole amounts of protein samples derived from one or two 2D gels. The method was also useful for peptide mapping and determination of amino acid sequences of proteins micro-prepared from the 2D gel. Because 2D-PAGE has an excellent resolving power in protein separation and because capillary LC-ESI-TSQMS provides structural information with very small amounts of samples, the combined system of 2D-PAGE and capillary LC-ESI-TSQMS described here should allow wide applications to molecular studies of genes and proteins, such as identifications of protein spots on 2D gels, confirmation of gene/protein sequences and analysis of post-translational modification of proteins present naturally in tissue/cell extracts or expressed by recombinant DNA techniques.     

Analysis of glycosyl phosphatidylinositol-anchored proteins by two-dimensional gel electrophoresis

The aim of this study was to characterize mammalian glycosyl phosphatidylinositol (GPI)-anchored proteins y two-dimensional gel electrophoresis using immobilized pH gradients. Analysis was performed on detergent-resistant membrane fractions of baby hamster kidney (BHK) cells, since such fractions have previously been shown to be highly enriched in GPI-anchored proteins. Although the GPI-anchored proteins were readily separated by one-dimensional sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE), these proteins were undetectable on two-dimensional (2-D) gels, even though these gels unambiguously revealed high enrichment of known hydrophobic proteins of detergent-resistant membranes such as caveolin-1 and flotillin-1 (identified by Western blotting and tandem mass spectrometry, respectively). Proper separation of GPI-anchored proteins required cleavage of the lipid tail with phosphatidylinositol-specific phospholipase C, presumably to avoid interference of the hydrophobic phospholipid moiety of GPI-anchors during isoelectric focusing. Using this strategy, BHK cells were observed to contain at least six GPI-anchored proteins. Each protein was also present as multiple isoforms with different isoelectric points and apparent molecular weights, consistent with extensive but differential N-glycosylation. Pretreatment with N-glycosidase F indeed caused the different isoforms of each protein to collapse into a single spot. In addition, quantitative removal of N-linked sugars greatly facilitated the detection of heavily glycosylated proteins and enabled sequencing by nanoelectrospray-tandem mass spectrometry as illustrated for the GPI-anchored protein, Thy-1.     

Studies on the biogenesis of an enzymatically active complex III of the respiratory chain from yeast mitochondria

Complex III isolated from yeast mitochondria catalyzed an antimycin A and Diuron-sensitive coenzyme QH2-cytochrome c reductase activity with a turnover number of 15.7 sec(-1) and contained 10 nmoles of cytochrome b and 4.6 nmoles of cytochrome c1 per mg of protein. Electrophoresis in sodium dodecyl sulfate acrylamide gels resolved Complex III into 10 bands with apparent molecular weights of 50,000, 40,000, 30,000, 29,000, 24,000, 17,000, 16,000, 12,000, 8,400, and 5,800. Yeast cells were labeled under nongrowing conditions with (35S)-methionine in the absence or presence of inhibitors of cytoplasmic or mitochondrial protein synthesis. Labeled Complex III was isolated by immunoprecipitation from detergent-solubilized mitochondria using anti-serum raised against the purified complex. Analysis of the immunoprecipitates by polyacrylamide gel electrophoresis revealed that a 30,000-dalton protein, cytochrome b, as well as 16,000-dalton protein were labeled in the presence of cycloheximide, indicating that they are products of mitochondrial protein synthesis. Immunoprecipitates from mitochondria obtained from cells labeled in the presence of chloramphenicol contained a new radioactive peak with a molecular weight of 100,000. In addition, significant decreases in the labeling of the proteins with molecular weights of 50,000, 40,000, 30,000, and 16,000 were observed. When Complex III was isolated by immunoprecipitation from intact spheroplasts after a 5-minute pulse with (35S)-methionine, the 100,000-dalton protein was labeled in the immunoprecipitate whether or not chloramphenicol was present; however, after a 1-hour chase with unlabeled methionine, decreased labeling of the 100,000-dalton protein was observed concomitant with an increased labeling of the 50,000- and 40,000-dalton proteins. These results suggest that a protein with a molecular weight of 100,000 may either be a precursor or a partially assembled form of other proteins of Complex III, most probably the two largest polypeptides.     

Characterization of sodium dodecylsulfate polyacrylamide gel electrophoresis-separated M. agalactiae membrane antigens by mass spectrometry

Mycoplasma membrane proteins are generally designated according to their apparent molecular weight measured by SDS-PAGE. Several results about mycoplasma membrane antigens are conflicting because some doubts are emerging about the accuracy of the method utilised to identify the antigens. Aim of this work, was to characterise proteins separated after sodium dodecylsulfate polyacrylamide gel electrophoresis (SDS-PAGE)-mass spectrometry to allow an uncontroversial designation of the antigens. Fifteen proteins with molecular weights ranging from 15,000 to 80,000 Da had been excised from gel and their whole molecular weight and proteolytic pattern had been determined using MALDI-TOF. The peptide pattern obtained using trypsin digestion allowed us to identify LipA, P48, P59, P80 and P40. Some other proteins showed analogies to proteins of Mycoplasma genitalium or Mycoplasma pneumoniae the only Mycoplasmas completely sequenced. There wasn't a close correspondence between the SDS-PAGE apparent molecular weight (generally used to name the proteins), the gene derived calculated mass and the molecular weight of whole proteins measured by MALDI-TOF. Only micro sequence data obtained by MS/MS allowed us to identify LipC, described as one of the most important Mycoplasma agalactiae antigens. This protein was found in correspondence with the 50 kDa region, instead of the 25 kDa region, confirming a phenomenon that we previously described.     

The adsorption of large proteins in electrofocusing on immobilized pH gradients: II. Dependence on the oligomeric state of Immobiline

Five proteins with molecular mass in excess of 200 kDa were found to adsorb onto gels during isoelectric focusing on immobilized pH gradients (IPGEF). To probe for the mechanism of that adsorption, the homogeneity of the six Immobiline preparations used to make IPGEF gels was tested. Five of these Immobiline preparations appear homogeneous in gel filtration of Sephadex G-10. The sixth Immobiline (pK 9.3) exhibits a minor component eluting ahead of the major peak and comprising less than 4% of the total Immobiline absorbing at 226 nm. The proportion of the minor component increases with column load. Major and minor components when isolated appear to equilibrate with one another. Judging by the results of mass spectrometry, all 6 preparations are free of small aggregates of less than 500-600 Da molecular mass. Ultrafiltration of the Immobiline preparations through a membrane with 500 Da nominal cutoff leads to partial desorption of only 3 of the 5 adsorbed proteins. CHAPS is ineffectual in desorbing the 5 proteins from the IPG gel made with ultrafiltered Immobilines. None of the 6 Immobiline preparations used precipitates ferritin. All large proteins that adsorb onto IPGEF gels in the pH range 4-9.5 also adsorb onto commercial IPGEF gels in the pH range 4-7.     

Approach to stationary two-dimensional pattern: influence of focusing time and immobiline/carrier ampholytes concentrations

Horizontal two-dimensional (2-D) electrophoresis with immobilized pH gradients (IPG) in the first dimension for buffer soluble proteins and for complex proteins solubilized in the presence of Nonidet P-40 (G?rg et al., Electrophoresis 1987, 8, 45-51), has been extended to analyze basic proteins of yeast cells focused under non-equilibrium and equilibrium conditions. Transient state isoelectric focusing (IEF) in IPG gels revealed sample smearing and background staining, displaying horizontal streaks in the resultant 2-D patterns. Inclusion of 0.5% carrier ampholytes (CA) to the IPG gel (IPG-CA), resulted in the formation of many sharp protein bands after transient state IEF with resultant distinct spots in the 2-D patterns; however, resolution was poor and the gel contained heavy background staining. With prolonged focusing time, background staining disappeared and there was less difference in the final steady state IEF patterns obtained with IPG and IPG-CA. Reduction of the Immobiline concentration to one third the manufacturer's recommended amount did not improve IEF resolution with respect to streaking and background staining under either transient state or equilibrium conditions. In general, spot intensities were less on 2-D gels using diluted IPG gels than with "standard" IPG gels. Optimization of 2-D electrophoresis with IPGs in the first dimension was strongly related to IEF conditions. The use of IPG gels focused to equilibrium should not only improve inter-gel reproducibility and resolution but also the quality of the final 2-D patterns with respect to background staining and horizontal streaking.