Amperometric determination of hydrogen peroxide with a manganese dioxide film-modified screen printed carbon electrode

A carbon thick film electrode modified with an MnO₂-film is investigated as an amperometric detector for hydrogen peroxide in flow-injection analysis (FIA). At an operating potential of +0.48 V vs. Ag/AgCl catalytic oxidation of the analyte is exploited for amperometric monitoring. Experimental parameters, such as pH of the carrier, working potential, flow rate and injection volume, are optimized. The amperometric signals are linearly proportional to the concentration of H₂O₂ in the range from 0.005 to 10 mg/L, showing a detection limit (3σ) of 2.3 μg/L. The method is applied to the determination of H₂O₂ in rain water and to a simple assay to quantify glucose in human plasma.     

Electrochemical behavior of hydrogen peroxide sensor based on new methylene blue as mediator

A novel amperometric hydrogen peroxide sensor was proposed by co-immobilizing new methylene blue (NMB) and Horseradish peroxidase (HRP) on glassy carbon electrode through covalent binding. The electrochemical behavior of the sensor was studied extensively in 0.1 mol/L phosphate buffering solution (pH = 7.0). The experiments showed NMB could effectively transfer electrons between hydrogen peroxide and glassy carbon electrode. The electron transfer coefficient and apparent reaction rate constant were determined to be 0.861 and 1.27 s⁻¹. The kinetic characteristics and responses of sensor on H₂O₂ were investigated. The Michaelis constant is 8.27 mol/L and the linear dependence of current on H₂O₂ is in the range of 2.5–100 μmol/L. At the same time, the effects of solution pH, buffer capacity, and temperature on the sensor were examined. Translated from Chemistry, 2006, 23(8): 916–920 [译自: 化学通报]     

Reagentless amperometric biosensor highly sensitive to hydrogen peroxide based on the incorporation of Meldola Blue, fumed-silica and horseradish peroxidase into carbon paste

 A reagentless amperometric sensor highly sensitive to H₂O₂ has been prepared by incorporating fumed silica, horseradish peroxidase (HRP) and Meldola Blue into carbon paste. The efficient mediating ability to shift electrons between HRP and the carbon paste electrode via Meldola Blue was investigated by cyclic voltammetric and amperometric measurements. Reproducibility, response time, detection limit, selectivity and effects of applied potential, temperature and pH on the response of the sensor are reported. The high sensitivity of the sensor with a detection limit of 0.1 μmol/l arose from the high efficiency of the bioelectrocatalytic reduction of hydrogen peroxide via HRP and Meldola Blue. The dependence of the Michaelis-Menten constant on the applied potential and the mediator concentration has been investigated and the results are presented. Received: 20 December 1995/Revised: 13 March 1996/Accepted: 16 March 1996     

An amperometric biosensor using toluidine blue as an electron transfer mediator intercalated in α-zirconium phosphate-modified horseradish peroxidase immobilization matrix

A novel H₂O₂ biosensor was constructed employing α-zirconium phosphate as a new support substrate to hold an electron shuttle toluidine blue between a glassy carbon electrode and horseradish peroxidase. Toluidine blue was intercalated into α-zirconium phosphate-modified horseradish peroxidase immobilization matrix cross-linked on a glassy carbon electrode surface via bovine serum albumin-glutaraldehyde. This co-immobilization matrix of the mediator and the enzyme was formed from the α-zirconium phosphate (α-ZrP)-toluidine blue (TB) inclusion colloid in which horseradish peroxidase (HRP) was dissolved. Intercalation of TB in layered α-ZrP was investigated by scanning electron microscopy (SEM), X-ray powder diffraction (XRD) and electrochemical measurements. TB immobilized in this way underwent a quasi-reversible electrochemical redox reaction at the electrode. Cyclic voltammetry and amperometric measurements demonstrated good stability and efficiently-shuttled electrons between HRP and the electrode. The sensor responded rapidly to H₂O₂ with a detection limit of 3.0 × 10^–7 mol/L. Received: 1 July 1997 / Revised: 13 October 1997 / Accepted: 21 October 1997     

An improved ELISA for the determination of tobacco mosaic virus with linear sweep voltammetry detection based on a new system of PAP-H2O2-HRP

An improved ELISA for the determination of tobacco mosaic virus (TMV) with linear sweep voltammetry based on a new system of p-aminophenol (PAP)- H₂O₂- horseradish peroxidase (HRP) has been developed. The enzymatic product 3-[(4-hydroxyphenyl)amino]-4-(2-amino-5-hydroxyphenyl)-6-[(4-hydroxyphenyl)imino]-2,4-cyclohexadiene-1-one, produced from HRP catalyzing the oxidation of PAP with H₂O₂, yields a sensitive linear sweep voltammetric response at a potential of –0.45 V (vs. SCE) in Britton-Robinson (BR) buffer solution. By using this voltammetric peak, HRP can be measured with a detection limit of 0.4 mU/L and a linear range of 1.0 ∼ 1.0 × 10² mU/ L. The detection limit for the clarified TMV is 4.0 ng/mL and the highest dilution ratio detected for the infected leaf sap is 1 : 3.9 × 10⁶. The processes of the enzyme-catalyzed reaction and the electro-reduction of the product of the enzyme-catalyzed reaction have been investigated. Received: 17 November 1998 / Revised: 17 March 1999 / Accepted: 20 March 1999     

Core-valence correlation effects for molecules containing first-row atoms. Accurate results using effective core polarization potentials

The accuracy of employing effective core polarization potentials (CPPs) to account for the effects of core-valence correlation on the spectroscopic constants and dissociation energies of the molecules B₂, C₂, N₂, O₂, F₂, CO, CN, CH, HF, and C₂H₂ has been investigated by comparison to accurate all-electron benchmark calculations. The results obtained from the calculations employing CPPs were surprisingly accurate in every case studied, reducing the errors in the calculated valence D _e values from a maximum of nearly 2.5 kcal/mol to just 0.3 kcal/mol. The effects of enlarging the basis set and using higher-order valence electron correlation treatments were found to have only a small influence on the core-valence correlation effect predicted by the CPPs. Thus, to accurately recover the effects of intershell correlation, effective core polarization potentials such as the ones used in the present work provide an attractive alternative to carrying out computationally demanding calculations where the core electrons are explicitly included in the correlation treatment. Received: 11 May 1998 / Accepted: 27 July 1998 / Published online: 28 October 1998     

TNT determination based on its degradation by immobilized HRP with electrochemical sensor

Based on the mechanism of 2,4,6-Trinitrotoluene (TNT) degradation, an amperometric hydrogen peroxide biosensor was constructed for the determination of trace amounts of TNT by immobilization of MWCNTs, HRP and Nafion onto the surface of glassy carbon electrode (GCE). The Nafion/MWCNTs/HRP biosensor was capable of degrading TNT with the consumption of H₂O₂ and HRP in 0.2 mol/L PBS (pH 7.0). Trace TNT was quantitative analyzed by the current decrease of H₂O₂ at the reductive potential of −0.35 V using cyclic voltammetry (CV). Effect of the ratio of MWCNTs/HRP, initial concentration of H₂O₂ and electrolyte’s pH were also optimized by CV. Under the optimal conditions, the current decrease of H₂O₂ that was consumed by TNT degradation was proportional to TNT ranging from 8.8 × 10⁻⁹ mol/L to 2.64 × 10⁻⁷ mol/L with a detection limit of 3.0 × 10⁻⁹ mol/L (S/N = 3). It developed a new way for simple, rapid and sensitive measurement of trace TNT.     

The effect of water vapor on the oxidation behavior of 9%Cr steels in simulated combustion gases

The effect of the O₂ and H₂O content on the oxidation behavior of the 9%Cr steel P91 was studied in the temperature range of 600–800 °C. The oxidation rates under the various experimental conditions were determined by in-situ thermogravimetry. In dry oxygen a protective scale growth occurs with an oxidation rate controlled by diffusion in the scale. In presence of water vapor, after an incubation period, the scales become non-protective, as a result of a change of the oxidation limiting process. The water vapor effect is especially apparent in the temperature range of 600–700 °C, whereas at higher temperatures hardly any effect was found. The destruction of the protective scale by water vapor does not only depend on the H₂O content but also on the H₂O/O₂-ratio. Received: 15 July 1997 / Revised: 5 February 1998 / Accepted: 10 February 1998     

A PVC-based cryptand C2B22 membrane potentiometric sensor for zinc(II)

A PVC membrane electrode for zinc ions based on cryptand C2_B22 as membrane carrier was prepared. The electrode exhibits a linear stable response over a wide concentration range (5.0 × 10^–2– 5.0 × 10^–5 mol/L) with a slope of 24 mV/ decade and a limit of detection of 3.98 × 10^–5 mol/L (2.6 μg/g). It has a fast response time of about 30 s and can be used for at least 4 months without any divergence in potential. The proposed sensor revealed good selectivities for Zn²⁺ over a wide variety of other metal ions and could be used in a pH range of 4–7. It was used as an indicator electrode in potentiometric titration of zinc ion. Received: 26 February 1998 / Revised: 25 May 1998 / Accepted: 28 May 1998     

Room temperature ionic liquid doped DNA network immobilized horseradish peroxidase biosensor for amperometric determination of hydrogen peroxide

A novel electrochemical H₂O₂ biosensor was constructed by embedding horseradish peroxide (HRP) in a 1-butyl-3-methylimidazolium tetrafluoroborate doped DNA network casting on a gold electrode. The HRP entrapped in the composite system displayed good electrocatalytic response to the reduction of H₂O₂. The composite system could provide both a biocompatible microenvironment for enzymes to keep their good bioactivity and an effective pathway of electron transfer between the redox center of enzymes, H₂O₂ and the electrode surface. Voltammetric and time-based amperometric techniques were applied to characterize the properties of the biosensor. The effects of pH and potential on the amperometric response to H₂O₂ were studied. The biosensor can achieve 95% of the steady-state current within 2 s response to H₂O₂. The detection limit of the biosensor was 3.5 μM, and linear range was from 0.01 to 7.4 mM. Moreover, the biosensor exhibited good sensitivity and stability. The film can also be readily used as an immobilization matrix to entrap other enzymes to prepare other similar biosensors. Figure Horseradish peroxidase (HRP) embedded in a 1-butyl-3-methylimidazolium tetrafluoroborate (BMIM·BF ₄ ) doped DNA network can be used to fabricate a HRP sensor for the determination of H₂O₂     

Anharmonic force field and spectroscopic constants of silene: an ab initio study

High-level ab initio calculations with large basis sets are reported for silene, H₂C=SiH₂. Correlated harmonic force fields are obtained from coupled cluster CCSD(T) calculations with the cc-pVQZ basis (cc-pVTZ for H) while the anharmonic force fields are computed at the MP2/TZ2Pf level. There is excellent agreement with the available experimental data, in particular the equilibrium geometry and the fundamental vibrational frequencies. Many other spectroscopic constants are predicted for the C _{2 v} isotopomers of silene. Received: 27 May 1998 / Accepted: 23 July 1998 / Published online: 9 October 1998     

Highly sensitive choline biosensor based on carbon nanotube-modified Pt electrode combined with sol-gel immobilization

A novel amperometric choline biosensor has been fabricated with choline oxidase (ChOx) immobilized by the sol-gel method on the surface of multi-walled carbon nanotubes (MWCNT) modified platinum electrode to improve the sensitivity and the anti-interferential property of the sensor. By analyzing the electrocatalytic activity of the modified electrode by MWCNT, it was found that MWCNT could not only improve the current response to H₂O₂ but also decrease the electrocatalytic potential. The effects of experimental variables such as the buffer solutions, pH and the amount of loading enzyme were investigated for the optimum analytical performance. This sensor shows sensitive determination of choline with a linear range from 5.0 × 10⁻⁶ to 1.0 × 10⁻⁴ mol/L when the operating pH and potential are 7.2 and 0.15 V, respectively. The detection limit of choline was 5.0 × 10⁻⁷ mol/L. Selectivity for choline was 9.48 μA·(mmol/L)⁻¹. The biosensor exhibits excellent anti-interferential property and good stability, retaining 85% of its original current value even after a month. It has been applied to the determination of choline in human serum. Translated from Chinese Journal of Analytical Chemistry, 2006, 34(7): 910–914 (in Chinese)     

An amperometric hydrogen peroxide biosensor based on immobilization of horseradish peroxidase on an electrode modified with magnetic dextran microspheres

A new kind of magnetic dextran microsphere (MDMS) with uniform shape and narrow diameter distribution has been prepared from magnetic iron nanoparticles and dextran. Horseradish peroxidase (HRP) was successfully immobilized on the surface of an MDMS-modified glassy-carbon electrode (GCE), and the immobilized HRP displayed excellent electrocatalytic activity in the reduction of H₂O₂ in the presence of the mediator hydroquinone (HQ). The effects of experimental variables such as the concentration of HQ, solution pH, and the working potential were investigated for optimum analytical performance. This biosensor had a fast response to H₂O₂ of less than 10 s and an excellent linear relationship was obtained in the concentration range 0.20 μmol L⁻¹–0.68 mmol L⁻¹, with a detection limit of 0.078 μmol L⁻¹ (S/N = 3) under the optimum conditions. The response showed Michaelis–Menten behavior at larger H₂O₂ concentrations, and the apparent Michaelis–Menten constant was estimated to be 1.38 mmol L⁻¹. Moreover, the selectivity, stability, and reproducibility of the biosensor were evaluated, with satisfactory results. Figure Amperometric response of the biosensor to successive additions of H₂O₂ and the plot of amperometric response vs. H₂O₂ concentration     

Chemiluminescent lipase determination based on the enhanced luminol/H2O2/horseradish peroxidase/fluorescein diacetate energy transfer system

A methodology for the determination of lipase, based on the coupled processes of energy transfer and enhancement of the chemiluminescence of the luminol-H₂O₂-horseradish peroxidase (HRP) system has been developed. Fluorescein diacetate (FDA) was hydrolyzed to fluorescein by the action of the enzyme lipase, and this compound acted as an enhancer of the chemiluminescent process and acceptor of the chemiluminescent emission from the luminol-H₂O₂-HRP system. By measuring the transferred emission to fluorescein at 525 nm, lipase (range 0.2–1.5 U/mL, RSD 2.3%) was determined. This methodology permited the determination of every compound of the system, thus, H₂O₂ (range 0.5–2 mM, RSD 6.9%) and HRP (range 5.5–49.5 U/mL, RSD 3.6%) could also be determined. Lipase was determined in rabbit serum with 96.7 ± 3.3% and 102.9 ± 5.4% recoveries for two different lipase concentrations. Besides, H₂O₂ was determined in the disinfectant solution for contact lenses. Received: 1 March 1999 / Revised: 6 May 1999 / Accepted: 12 May 1999     

Electrocatalytic reduction of nitrite on the surface of a glassy carbon electrode modified by palladium(II)-substituted Dawson type heptadecatungstodiphosphate

A palladium(II)-substituted Dawson type heptadecatungstodiphosphate, K₈[P₂W₁₇O₆₁Pd(H₂O)](abbreviated as P₂W₁₇Pd in the following), was used to construct a new kind of chemically modified electrode (CME) by electrodeposition on the surface of a glassy carbon electrode for the first time. This modified electrode was characterized by Fourier transform infrared reflection absorption spectroscopy (FTIRRAS), X-ray photoelectron spectroscopy (XPS) and cyclic voltammetry (CV). FTIRRAS and XPS suggested that the adsorbed species on the electrode surface has the same Dawson type structure as the heteropolyanion in buffer solution. A couple of waves was observed on the P₂W₁₇Pd CME, which was ascribed to the redox process of the palladium center in the heteropolytungstate. After continuous potential scanning for 30 min in a pH 4.0 buffer, 94% of the original coverage remains for the CME. The P₂W₁₇Pd CME had high electrocatalytic activity for nitrite reduction and exhibited good reproducibility and stability. The catalytic peak current was found to be linear with the nitrite concentration in the range of 1 ∼ 50 mmol/L, with a correlation coefficient of 0.994. The effect of solution pH on the catalytic activity of the CME for nitrite reduction was also investigated. Received: 20 May 1998 / Revised: 7 September 1998 / Accepted: 15 September 1998     

Electrocatalytic reduction of nitrite on the surface of a glassy carbon electrode modified by palladium(II)-substituted Dawson type heptadecatungstodiphosphate

A palladium(II)-substituted Dawson type heptadecatungstodiphosphate, K₈[P₂W₁₇O₆₁Pd(H₂O)](abbreviated as P₂W₁₇Pd in the following), was used to construct a new kind of chemically modified electrode (CME) by electrodeposition on the surface of a glassy carbon electrode for the first time. This modified electrode was characterized by Fourier transform infrared reflection absorption spectroscopy (FTIRRAS), X-ray photoelectron spectroscopy (XPS) and cyclic voltammetry (CV). FTIRRAS and XPS suggested that the adsorbed species on the electrode surface has the same Dawson type structure as the heteropolyanion in buffer solution. A couple of waves was observed on the P₂W₁₇Pd CME, which was ascribed to the redox process of the palladium center in the heteropolytungstate. After continuous potential scanning for 30 min in a pH 4.0 buffer, 94% of the original coverage remains for the CME. The P₂W₁₇Pd CME had high electrocatalytic activity for nitrite reduction and exhibited good reproducibility and stability. The catalytic peak current was found to be linear with the nitrite concentration in the range of 1 ∼ 50 mmol/L, with a correlation coefficient of 0.994. The effect of solution pH on the catalytic activity of the CME for nitrite reduction was also investigated. Received: 20 May 1998 / Revised: 7 September 1998 / Accepted: 15 September 1998     

Mediator-free amperometric determination of glucose based on direct electron transfer between glucose oxidase and an oxidized boron-doped diamond electrode

A mediator-free glucose biosensor, termed a “third-generation biosensor,” was fabricated by immobilizing glucose oxidase (GOD) directly onto an oxidized boron-doped diamond (BDD) electrode. The surface of the oxidized BDD electrode possesses carboxyl groups (as shown by Raman spectra) which covalently cross-link with GOD through glutaraldehyde. Glucose was determined in the absence of a mediator used to transfer electrons between the electrode and enzyme. O₂ has no effect on the electron transfer. The effects of experimental variables (applied potential, pH and cross-link time) were investigated in order to optimize the analytical performance of the amperometric detection method. The resulting biosensor exhibited fast amperometric response (less than 5 s) to glucose. The biosensor provided a linear response to glucose over the range 6.67×10⁻⁵ to 2×10⁻³ mol/L, with a detection limit of 2.31×10⁻⁵ mol/L. The lifetime, reproducibility and measurement repeatability were evaluated and satisfactory results were obtained.     

An Ni(chitin)2 modified nitric oxide microsensor

The development of a simple, sensitive, selective, and stable amperometric nitric oxide microsensor is described. It is based on Ni(chitin)₂ mediators immobilized on a platinum, Nafion modified electrode. The detection of NO is based on the Ni(chitin)₂ catalysis of NO oxidation at an anodic potential of +0.74 V (vs. SCE). The catalytic peak current is linear for a NO concentration in the range of 8.5 × 10^–8 mol/L to 1.5 × 10^–5 mol/L, with a correlation coefficient of 0.9992. The detection limit of the microsensor is 5.0 × 10^–8 mol/L. It is suitable for the direct measurement of NO in biological systems. Received: 5 February 1999 / Revised: 15 June 1999 / Accepted: 17 June 1999     

Amperometric determination of xanthine in tea,coffee, and fish meat with graphite rod bound xanthine oxidase

A method is described for construction of an amperometric xanthine biosensor based on graphite rod modified through adsorption of xanthine oxidase. Enzymatically produced H₂O₂ from xanthine was split into 2H⁺ + O₂ + 2^e− at 0.6 V and the current was measured, which was directly proportional to xanthine concentration ranging from 1 ° 10⁻⁷ to 6 ° 10⁻⁷ M with a detection limit of 1 ° 10⁻⁷ M. The biosensor exhibited optimum response within 35 sec at pH 7.0 and 35°C. It was employed for determination of xanthine in tea leaves (0.9 ° 10⁻⁵−2.5 ° 10⁻⁵ mmol/g), coffee powder (3.2 μmol/g) and fish meat (90 mmol/g). The content of xanthine in fish meat increased 6.5 times with its storage at room temperature during 15 days. The enzyme electrode could be reused 200 times during the span of 30 days, when stored in reaction buffer at 4°C.     

Study of transition metal oxide doped LaGaO3 as electrode materials for LSGM-based solid oxide fuel cells

Transition metal oxide doped lanthanum gallates, La_0.9Sr_0.1Ga_0.8M_0.2O₃ (where M=Co, Mn, Cr, Fe, or V), are studied as mixed ionic-electronic conductors (MIECs) for electrode applications. The electrochemical properties of these materials in air and in H₂ are characterized using impedance spectroscopy, open cell voltage measurement, and gas permeation measurement. Three single cells based on La_0.9Sr_0.1Ga_0.8 Mg_0.2O₃ (LSGM) electrolyte (1.13 to 1.65 mm thick) but with different electrode materials are studied under identical conditions to characterize the effectiveness of the lanthanum gallate-based MIECs for electrode applications. At 800 °C, a single cell using La_0.9Sr_0.1- Ga_0.8Co_0.2O₃ as the cathode and La_0.9Sr_0.1Ga_0.8Mn_0.2O₃ as the anode shows a maximum power density of 88 mW/cm², which is better than that of a cell using Pt as both electrodes (20 mW/cm²) and that of a cell using La_0.6Sr_0.4CoO₃ (LSC) as the cathode and CeO₂-Ni as the anode (61 mW/cm²) under identical conditions. The performance of LSGM-based fuel cells with MIEC electrodes may be further improved by reducing the electrolyte thickness and by optimizing the microstructures of the electrodes through processing. Received: 9 January 1998 / Accepted: 1 May 1998