Full-field refractive index measurement with simultaneous phase-shift interferometry

Using the phenomenon of total internal reflection and a beam splitting device, a technique of simultaneous phase-shift interferometry is proposed for measuring the full-field refractive index. Because this method applies a beam splitting device that mimics the characteristics of beam splitting and phase modulation, four interferemetric images of various phase distributions can be simultaneously captured. Therefore, this setup can avoid errors caused by non-simultaneous capturing of images and offers the benefits of high stability, ease of operation, and real-time measurement. Furthermore, using the phenomenon of total internal reflection, the phase difference between p- and s-polarized light varies considerably with the refractive index of a tested specimen. This can substantially increase the measurement resolution. The feasibility of this method is verified using an experiment, and the measurement resolution can be higher than 3.65 × 10⁻⁴ RIU.     

Full-field measurement of surface reflectivity using a microscopy for refractive index profiling of GRIN lenses

This paper outlines an improved technique for profiling the refractive index of Graded-index (GRIN) lenses based on the measurements obtained from a reflectivity image. Reflective cross-sectional image of the GRIN lens were compared with a reflectance reference target under illumination at small incidence angles to obtain the full-field refractive index distribution of the GRIN lens quickly and easily.     

Dual-confocal fiber-optic method for absolute measurement of refractive index and thickness of optically transparent media

We present a novel noncontact optical method for absolute measurement of refractive index and thickness of optically transparent media. The method is based on a simple dual-confocal fiber-optic sensor design. It includes two independent confocal channels consisting of two identical apertureless fiber-optic-type confocal microscopes constructed by use of a single 2x2 fiber coupler. A geometrical-ray model is used to obtain the analytical dependence between the sample's refractive index and its thickness. The measurement method provides high accuracy in spatially locating the specific imaging points that correspond to the backreflected intensity peaks of the confocal responses. Thus, a simultaneous measurement of the sample refractive index and thickness is achieved.     

Needle-based refractive index measurement using low-coherence interferometry

We present a novel needle-based device for the measurement of refractive index and scattering using low-coherence interferometry. Coupled to the sample arm of an optical coherence tomography system, the device detects the scattering response of, and optical path length through, a sample residing in a fixed-width channel. We report use of the device to make near-infrared measurements of tissues and materials with known optical properties. The device could be used to exploit the refractive index variations of tissue for medical and biological diagnostics accessible by needle insertion.     

Continuous-wave measurement of the fiber nonlinear refractive index

We propose a technique for measuring the nonlinear refractive index of fiber based on transmission-coefficient measurements in a fiber Sagnac interferometer. In contrast with traditional methods, the proposed method uses a single optical source operating in cw mode and direct intensity measurement, enabling one to avoid the errors caused by fiber dispersion and uncertainty of spectral peak difference measurements that occur with pulse-based methods. The nonlinear refractive index in 20-mol. % GeO(2) fiber was measured to be (3.1 +/- 0.2) x 10(-16) cm(2) W(-1) at 1064 nm.     

Spectroscopic measurement of the refractive index of ion-implanted diamond

We present the results of variable-angle spectroscopic ellipsometry and transmittance measurements to determine the variation of the complex refractive index of ion-implanted single-crystal diamond. An increase is found in both real and imaginary parts at increasing damage densities. The index depth variation is determined in the whole wavelength range between 250 and 1690 nm. The dependence from the vacancy density is evaluated, highlighting a deviation from linearity in the high-damage-density regime. A considerable increase (up to 5%) in the real part of the index is observed, attributed to an increase in polarizability, thus offering new microfabrication possibilities for waveguides and other photonic structures in diamond.     

Z-scan measurement of the nonlinear refractive index of graphene

Under strong laser illumination, few-layer graphene exhibits both a transmittance increase due to saturable absorption and a nonlinear phase shift. Here, we unambiguously distinguish these two nonlinear optical effects and identify both real and imaginary parts of the complex nonlinear refractive index of graphene. We show that graphene possesses a giant nonlinear refractive index n(2)?10(-7) cm(2) W(-1), almost 9 orders of magnitude larger than bulk dielectrics. We find that the nonlinear refractive index decreases with increasing excitation flux but slower than the absorption. This suggests that graphene may be a very promising nonlinear medium, paving the way for graphene-based nonlinear photonics.     

大气气溶胶消光特性和折射率的测量

 介绍了一种综合利用能见度仪、微脉冲激光雷达和光学粒子计数器测量大气气溶胶折射率的新方法。首先使用能见度仪和激光雷达测量出大气气溶胶的消光系数和消光后向散射比,然后使用粒子计数器测量出粒子谱分布,结合气溶胶粒子折射率,根据球形粒子的米（Mie）散射理论,可以得到气溶胶消光系数和消光后向散射比。通过分析消光系数、消光后向散射比、粒子谱分布和折射率之间的关系,结合已知的消光系数和消光后向散射比,反演出大气气溶胶粒子的折射率。     

Group refractive index measurement by fringes of equal chromatic order

Fringes of equal chromatic order in transmission across a thin liquid or a thin solid sample inside a wedge interferometer, followed with a grating spectrograph, are produced. A single-shot interferogram of the air and sample regions is recorded. Locations of fringes maxima in the air region are fitted in a numerical procedure based on Cauchy's dispersion function. Then it is used for measuring the interferometric gap thickness. The order of interference in the sample region is represented by a third-order polynomial in the wavenumber for deducing the sample group refractive index. An error analysis of the measured group refractive index is given. The method is applied for measuring the group refractive index of water and mica samples across the visible spectrum. The method measures both the sample thickness and its group refractive index. It is static with no moving parts and suitable for thin liquid or solid samples without immersion liquids.     

大气气溶胶消光特性和折射率的测量

介绍了一种综合利用能见度仪、微脉冲激光雷达和光学粒子计数器测量大气气溶胶折射率的新方法。首先使用能见度仪和激光雷达测量出大气气溶胶的消光系数和消光后向散射比,然后使用粒子计数器测量出粒子谱分布,结合气溶胶粒子折射率,根据球形粒子的米（Mie）散射理论,可以得到气溶胶消光系数和消光后向散射比。通过分析消光系数、消光后向散射比、粒子谱分布和折射率之间的关系,结合已知的消光系数和消光后向散射比,反演出大气气溶胶粒子的折射率。     

基于平行平板的折射率高精度非接触测量

常用的测量折射率的方法如偏向角法、自准直法、临界角法、 V棱镜法等,这些方法通常需特制三棱镜与待测件。待测样品不一致且过程复杂,测试定标周期长,难于自动化。为了保证待测材料的完整及实现自动化测量,进行了基于平行平板的折射率非接触测量的尝试。运用该方法进行折射率的测量,不需特制三棱镜并且待测件与待测样品一致。分析表明,通过选择合适的测量角度,该方法旋转角度精度为a=0.003（即10）,导轨精度为L=0.000 8 mm,平行平板厚度测量精度为d=0.001 mm。     

用表面等离子波相位检测法测量液体折射率

表面等离子体波（ＳＰＷ） 检测技术近年来已被应用在生物传感领域。它通过探测介质的折射率变化来探测生物反应。理论分析表明,利用ＳＰＷ 相位检测的方法可以实现高分辨率的液体折射率测量。在优化测量参数的基础上,使用低频差横向塞曼激光器为光源,进行了验证实验,实验结果与理论相符合。     

Full-field laser metrology for fluid velocity measurement

This paper reviews the development of full-field laser metrology from its inception as a dynamic extension of scattered light speckle photography, a voherent optical technique originally developed to make full-field measurements of quasi-static displacements in transparent solids, to its present applications in fluid dynamic studies. The full-field laser velocimetry technique, including both double exposure and multiple exposure recording methods, is discussed in detail, and comparison is made of their advantages and disadvantages in applications to steady and unsteady flows. Both the coherent light speckle and the particle image modes of operation are defined and evaluated. Computer aided ‘point-wise’ (Young's fringe) and ‘global’ (Fourier filtering) methods of optically analyzing the specklegrams are also discussed. Finally, experiments in which full-field laser velocimetry has been applied to a study of convective flow in a liquid are described, thus illustrating the potential of this new, non-onvasive optical technique.     

In situ measurement of group refractive index using tandem low-coherence interferometer

The group refractive index of BK-7 glass material is accurately measured using a tandem low-coherence interferometer, which is composed of a Mychelson interferometer and a Fizeau interferometer, within a combined standard uncertainty of 8.4 ppm. The experimental results are compared with the value calculated from the conventional data base on the phase refractive index, within a difference of about 4.7 ppm. This new method is applicable to in situ measurement due to the principle of its common optical path.     

Simultaneous measurement of refractive index and temperature using a microring resonator

An approach to the simultaneous measurement of refractive-index(RI) and temperature changes using optical ring resonators is proposed and theoretically demonstrated.With a liquid-core silica ring resonator as an example,two different-order whispering gallery modes(WGMs) might differ in not only RI but also temperature sensitivities.Thus,a second-order sensing matrix should be defined based on these WGMs to determine RI and temperature changes simultaneously.The analysis shows that the RI and temperature detection limits can be achieved on the order of 10 7 RI unit and 10 3 K at a wavelength of approximately 780 nm.     

Precision measurement of the refractive index of air with frequency combs

We report an experimental method for high-precision refractive index measurement using a Michelson interferometer setup with a femtosecond optical frequency comb as the light source. We demonstrate this technique by measuring the refractive index of air, under different pressures, inside a 29 m multipass cell. Both spectral and temporal interferograms are recorded. The method has a sensitivity of 6.2 x 10(-9) and a standard error of 7.4 x 10(-8) at fixed parameters (pressure and temperature). The possible variation of the density factor from the Lorentz-Lorenz equation is also discussed.     

Mathematical modeling and simulation of refractive index based Brix measurement system

Optical techniques developed for sensing and analysis purposes have been used in various fields. An attempt has been made to design optimization of refractormetric based method for the measurement of Brix. Mathematical modeling and simulation of the proposed system has been performed. From the study it is seen that mathematical model may help for getting the better performance to developed experimental model. Optimization of various constructional parameters including selection and location of source, prism and detector, position of source, angular position and height of source from prism plane, divergent angle of source, refractive index of prism, size of prism, the location of detector to pickup the optimum reflected light, refractive index of sample, critical angle, choice of suitable prism. The various possibilities of mounting position of source, detector, prism are studied. The mathematical model is developed considering the above mentioned parameters.     

Multiple-surface testing by a wavelength-scanning interferometer for refractive index inhomogeneity measurement

Wavelength-scanning interferometers can separate the multiple interference signals generated by several reflecting surfaces in the frequency space. Optical thickness variations of a three-layer object and its top surface shape were measured simultaneously by a wavelength-scanning Fizeau interferometer. An efficient sampling window for the phase detection has been derived that can compensate for the frequency detuning of the interference signal and suppress the cross talk from noise components in other frequencies. From the experimental results, the refractive index variation of a glass plate was calculated with an accuracy of ∼1 ppm, which is equivalent to several tens of nanometers in optical thickness variations. The text was submitted by the authors in English.     

Numerical reconstruction of the refractive index profile from transverse measurement data

In this paper, the accuracy of the numerical reconstruction of a fiber (or fiber preform) refractive index profile from the deflection function is investigated. A few methods of numerical reconstruction are proposed and compared with respect to accuracy and efficiency. The optimum algorithm is chosen for minimizing the reconstruction error and on-axis error that result from uncertainty of the data reading.     

Simultaneous measurement of refractive index and thickness with a convergent beam

A new approach to the simultaneous measurement of refractive index and thickness based on the focus shifts of a convergent beam intercepted by a test plate is proposed. By using ray optics, a defined focus shift can be derived as a function of the refractive index and thickness as well as the angular position of the test plate with respect to the optical axis. From a pair of focus shifts obtained at two different angular positions, it is shown that the desired measurands can be simultaneously determined without prior knowledge of either parameter. A simulation result for the proposed concept based on graphically solving the equations of their respective focus shifts is presented.