Internal structure of a thin film of mixed polymeric micelles on a solid/liquid interface

The adsorption of mixed micelles of poly(4-(2-amino hydrochloride-ethylthio)-butylene)- block-poly(ethylene oxide), PAETB 49- b-PEO 212 and poly(4-(2-sodium carboxylate-ethylthio)-butylene)- block-poly(ethylene oxide), PCETB 47- b-PEO 212 on solid/liquid interfaces has been studied with light, X-ray, and neutron reflectometry. The structure of the adsorbed layer can be described with a two-layer model consisting of an inner layer formed by the coacervate of the polyelectrolyte blocks PAETB 49 and PCETB 47 ( approximately 1 nm) and an outer layer of PEO 212 blocks ( approximately 6 nm). The micelles unfold upon adsorption forming a rather homogeneous flat layer that exposes its polyethylene oxide chains into the solution, thus rendering the surface antifouling after modification with the micelles.     

Cylindrical micelles of alpha-fluorocarbon-omega-hydrocarbon end-capped poly(N-acylethylene imine)s

Micelles of ABC block copolymers with varying degrees of polymerization of the B block (n) and constant lengths of the A and C blocks were investigated by small-angle X-ray scattering (SAXS), analytical ultracentrifugation (AUC), surface tension measurements, and isothermal titration calorimetry. The copolymers consisting of hydrophilic poly(N-acylethylene imine)s, end-capped with a hydrophobic fluorocarbon and a hydrocarbon block, are polymeric surfactants (gamma = 35 mN/m). They form cylindrical micelles with radii of 3.0 nm (n = 35), 3.8 nm (n = 57), and 4.0 nm (n = 72). Their lengths are about 20 nm. The micelles can be doped with 1,4-diiodoperfluorobutane for the polymers with n = 57 and 72 but not for n = 35. We assume that the doped micelles form distinct fluorocarbon domains, which are able to incorporate selectively the fluorocarbon dopant. The work presented here is a contribution to the development of multicompartment micelles.     

Intermolecular interactions governing solubilization in micelles of poly(alkylene oxide) surfactants

Partition coefficients for 39 low-molecular-mass compounds between water and micelles of an ethylene oxide-propylene oxide block copolymer (Pluronic P85) and the monolauryl ether of poly(ethylene oxide) (Brij 35) have been measured by the methods of fluorescence spectroscopy, fluorescence anisotropy, and dialysis kinetics. The tested compounds include aromatic hydrocarbons, phenols, naphthols, xanthene dyes, anthracycline antibiotics, and porphyrins. The multifactor analysis of the partition coefficients in terms of the linear free-energy relationships has been performed. It has been shown that the H-donating ability of compounds facilitates their solubilization in Pluronic micelles and has no effect on solubilization in micelles of monolauryl ether of poly(ethylene oxide). This difference indicates that, when solubilization occurs in Pluronic micelles, the compounds under study appear in a hydrophobic core composed of poly(propylene oxide) blocks.     

Evolution of multicompartment micelles to mixed corona micelles using solvent mixtures

Miktoarm star triblock copolymers mu-[poly(ethylethylene)][poly(ethylene oxide)][poly(perfluoropropylene oxide)] self-assemble in dilute aqueous solution to give multicompartment micelles with the cores consisting of discrete poly(ethylethylene) and poly(perfluoropropylene oxide) domains. Tetrahydrofuran is a selective solvent for both the poly(ethylethylene) and poly(ethylene oxide) blocks, and thus in tetrahydrofuran mixed corona micelles are favored with poly(perfluoropropylene oxide) cores. The introduction of tetrahydrofuran into water induces an evolution from multicompartment micelles to mixed corona [poly(ethylethylene) + poly(ethylene oxide)] micelles, as verified by dynamic light scattering and nuclear magnetic resonance spectroscopy. A mixed solvent containing 60 wt % tetrahydrofuran corresponds to the transition point, as verified by analysis of a poly(ethylethylene)-poly(ethylene oxide) diblock copolymer in the same solvent mixtures. Furthermore, cryogenic transmission electron microscopy suggests that, as the poly(ethylethylene) block transitions from the core to the corona, the micelle morphologies evolve from disks to oblate ellipsoid micelles (with some vesicles), with worms and spheres evident at intermediate compositions.     

Preparation of unidirectional end-grafted alpha-helical polypeptides by solvent quenching

A simple "solvent quenching" approach to align an alpha-helical end-grafted poly(gamma-benzyl l-glutamate) monolayer is presented. By sequentially treating poly(gamma-benzyl l-glutamate) with good solvent (chloroform) and bad solvent (acetone), we obtained a highly aligned monolayer with an average tilt angle as small as 3 degrees .     

Biodegradable/biocompatible ABC triblock copolymer bearing hydroxyl groups in the middle block

New biodegradable/biocompatible ABC block copolymers, poly(ethylene oxide)‐b‐poly(glycidol)‐b‐poly(L ,L ‐lactide) (PEO‐PGly‐PLLA), were synthesized. First, PEO‐b‐poly(1‐ethoxyethylglycidol)‐b‐PLLA was synthesized by a successive anionic ring‐opening copolymerization of ethylene oxide, 1‐ethoxyethylglycidyl ether, and L ,L ‐lactide initiated with potassium 2‐methoxyethanolate. In the second step, the 1‐ethoxyethyl blocking groups of 1‐ethoxyethylglycidyl ether were removed at weakly acidic conditions leaving other blocks intact. The resulting copolymers were composed of hydrophilic and hydrophobic segments joined by short polyglycidol blocks with one hydroxyl group in each monomeric unit. These hydroxyl groups may be used for further copolymer transformations. The PEO‐PGly‐PLLA copolymers with a molecular weight of PLLA blocks below 5000 were water‐soluble. Above the critical micellar concentration (ranging from 0.05 to1.0 g/L, depending on the composition of copolymer), copolymers formed macromolecular micelles with a hydrophobic PLLA core and hydrophilic PEO shell. The diameters of the micelles were about 25 nm. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3750–3760, 2003     

Wormlike morphology formation and stabilization of "pluronic p123" micelles by solubilization of pentaerythritol tetraacrylate

A transition from spherical to wormlike micelles of a poly(ethylene oxide) 20- block-poly(propylene oxide) 70- block-poly(ethylene oxide) 20 triblock copolymer Pluronic P123 induced by solubilization of a tetrafuctional monomer, Pentaerythritol tetraacrylate (PETA), in aqueous media has been studied. The wormlike micelles shape was locked by UV cross-linking of PETA within the micelles resulting in stabilized polymeric micelles (SPMs). The stability of SPMs in a good solvent for both polyether blocks like THF, and upon dilution below the critical micelle concentration (CMC) of P123 in water was confirmed by dynamic light scattering (DLS) and scanning force microscopy (SFM). Formation of cadmium sulfide (CdS) nanoparticles within the wormlike SPMs was carried out via the reduction of Cd (2+) with NaS and analyzed by transmission electron microscopy (TEM) and UV-vis absorption measurements. A stable water-dispersible hybrid system consisting of CdS quantum dots embedded into the wormlike SPMs was obtained.     

Self-assembly of poly(ethylene oxide)-b-poly(epsilon-caprolactone) copolymers in aqueous solution

The associative behavior of monodisperse diblock copolymers consisting of a hydrophilic poly(ethylene oxide) block and a hydrophobic poly(epsilon-caprolactone) or poly(gamma-methyl-epsilon-caprolactone) block has been studied in aqueous solution. Copolymers have been directly dissolved in water. The solution properties have been studied by surface tension, in relation to mesoscopic analyses by NMR (self-diffusion coefficients), transmission electron microscopy, and small-angle neutron and X-ray scattering. The experimental results suggest that micellization occurs at low concentration (approximately 0.002 wt %) and results in a mixture of unimers and spherical micelles that exchange slowly. The radius of the micelles has been measured (ca. 11 nm), and the micellar substructure has been extracted from the fitting of the SANS data with two analytical models. The core radius and the aggregation number change with the hydrophobic block length according to scaling laws as reported in the scientific literature. The poly(ethylene oxide) blocks are in a moderately extended conformation in the corona, which corresponds to about 25% of the completely extended chain. No significant modification is observed when poly(gamma-methyl-epsilon-caprolactone) replaces poly(epsilon-caprolactone) in the diblocks.     

Microenvironment in the corona region of triblock copolymer micelles: temperature dependent solvation and rotational relaxation dynamics of coumarin dyes

Dynamic Stokes' shift and fluorescence anisotropy measurements using coumarin-153 (C153) and coumarin-151 (C151) as the fluorescence probes have been carried out in aqueous poly(ethylene oxide)20-poly(propylene oxide)70-poly(ethylene oxide)20 (P123) and poly(ethylene oxide)100-poly(propylene oxide)70-poly(ethylene oxide)100 (F127) block copolymer micelles with an aim to understand the water structures and dynamics in the micellar corona region. It has been established that the probes reside in the micellar corona region. It is indicated that the corona regions of P123 and F127 micelles are relatively less hydrated than the Palisade layers of neutral micelles like Triton-X-100 and Brij-35. From the appraisal of total Stokes' shift values for the probes in the two block copolymer micelles, it is inferred that the F127 micelle is more hydrated than the P123 micelle. It is observed that the dynamic Stokes' shift values for both of the probes remain more or less similar at all the temperatures studied in the P123 micelle. For C153 in F127, however, the observed Stokes' shift is seen to decrease quite sharply with temperature, though it remains quite similar for C151. Moreover, the fraction of the unobserved initial dynamic Stokes' shift is appreciably higher for both the probes in the F127 micelle compared to that in P123. Over the studied temperature range of 293-313 K, the spectral shift correlation function is described adequately by a bi-exponential function. Rotational relaxation times for C153 in both the micelles show a kind of transition at around 303 K. These results have been rationalized assuming collapse of the poly(ethylene oxide) (PEO) blocks and formation of water clusters in the corona region due to dehydration of poly(ethylene oxide) blocks with an increase in temperature. A dissimilar probe location has been inferred for the differences in the results with C153 and C151 probes in F127. Comparison of the microviscosity and the hydration of the block copolymer micelles has also been made with those of the other commonly used neutral micelles, for a better understanding of the results in the block copolymer micelles.     

Supramolecular reactor from self-assembly of rod-coil molecule in aqueous environment

We synthesized an amphiphilic coil-rod-coil triblock molecule consisting of hexa-p-phenylene as a rod block and poly(ethylene oxide) with the number of repeating units of 17 as coil blocks and investigated aggregation behavior in aqueous environment. The rod-coil molecule was observed to aggregate into discrete micelles consisting of hydrophobic disklike rod bundles encapsulated by hydrophilic poly(ethylene oxide) coils. The aromatic bundles of the micelles were demonstrated to be used as an efficient supramolecular reactor for the room temperature Suzuki cross-coupling reaction of a wide range of aryl halides, including even aryl chlorides with phenylboronic acids in aqueous environment. These results demonstrate that self-assembly of amphiphilic rod-coil molecules can provide a useful strategy to construct an efficient supramolecular reactor for aromatic coupling reaction.     

Synthesis and characterization of ABA‐type amphiphilic tri‐block copolymers through anionic polymerization using end functionalized poly(ethylene oxide) oligomers

ABA‐type amphiphilic tri‐block copolymers were successfully synthesized from poly(ethylene oxide) derivatives through anionic polymerization. When poly(styrene) anions were reacted with telechelic bromine‐terminated poly(ethylene oxide) ( 1 ) in 2:1 mole ratio, poly(styrene)‐b‐poly(ethylene oxide)‐b‐poly(styrene) tri‐block copolymers were formed. Similarly, stable telechelic carbanion‐terminated poly(ethylene oxide), prepared from 1,1‐diphenylethylene‐terminated poly (ethylene oxide) ( 2 ) and sec‐BuLi, was also used to polymerize styrene and methyl methacrylate separately, as a result, poly (styrene)‐b‐poly(ethylene oxide)‐b‐poly(styrene) and poly (methyl methacrylate)‐b‐poly(ethylene oxide)‐b‐poly(methyl methacrylate) tri‐block copolymers were formed respectively. All these tri‐block copolymers and poly(ethylene oxide) derivatives, 1 and 2 , were characterized by spectroscopic, calorimetric, and chromatographic techniques. Theoretical molecular weights of the tri‐block copolymers were found to be similar to the experimental molecular weights, and narrow polydispersity index was observed for all the tri‐block copolymers. Differential scanning calorimetric studies confirmed the presence of glass transition temperatures of poly(ethylene oxide), poly(styrene), and poly(methyl methacrylate) blocks in the tri‐block copolymers. Poly(styrene)‐b‐poly(ethylene oxide)‐b‐poly(styrene) tri‐block copolymers, prepared from polystyryl anion and 1 , were successfully used to prepare micelles, and according to the transmission electron microscopy and dynamic light scattering results, the micelles were spherical in shape with mean average diameter of 106 ± 5 nm. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Preparation and solution behavior of a thermoresponsive diblock copolymer of poly(ethyl glycidyl ether) and poly(ethylene oxide)

A thermoresponsive diblock copolymer, poly(ethyl glycidyl ether)-block-poly(ethylene oxide) (PEGE-b-PEO), is synthesized by successive anionic ring-opening polymerization of ethyl glycidyl ether and ethylene oxide using 2-phenoxyethanol as a starting material, and its solution behavior is elucidated in water. In a dilute 1 wt % solution, the temperature-dependent alteration in the polymer hydrodynamic radius (RH) is measured in the temperature range between 5 and 45 degrees C by pulse-gradient spin-echo NMR and dynamic light scattering. The RH value increased with temperature in two steps, where the first step at 15 degrees C corresponds to the core-shell micelle formation and the second step at 40 degrees C corresponds to the aggregation of the core-shell micelles. The formation of the core-shell micelles is supported by the solubilization of a dye (1,6-diphenyl-1,3,5-hexatriene) in the hydrophobic core, which is recognized for a copolymer solution in the temperature range between 20 and 40 degrees C. In this temperature range, the core-shell micelles and the unimers coexist and the fraction of the former gradually increases with increasing temperature, suggesting equilibrium between the micelles and the unimers. In the concentrated regime (40 wt % solution), the solution forms a gel and the small-angle X-ray scattering measurements reveal the successive formation of hexagonal and lamellar liquid crystal phases with increasing temperature.     

Novel Thermoreversible Gelation of Biodegradable PLGA‐block‐PEO‐block‐PLGA Triblock Copolymers in Aqueous Solution

The BAB‐type triblock copolymers composed of a central poly(ethylene oxide) (PEO, M̄_nPEO = 1 000) block and two poly[(D ,L ‐lactic acid)‐co‐(glycolic acid)] end blocks with molecular weights between 900 and 1 600 exhibited an interesting phase transition behavior. The copolymer aqueous solution can form micelles with PLGA loops in the core and a PEO shell and groups of micelles because of bridging between micelles caused by the PLGA blocks with raising temperature. A possible micellar gelation mechanism was suggested.     

Physicochemical characterization of degradable thermosensitive polymeric micelles

Amphiphilic AB block copolymers consisting of thermosensitive poly(N-(2-hydroxypropyl) methacrylamide lactate) and poly(ethylene glycol), pHPMAmDL-b-PEG, were synthesized via a macroinitiator route. Dynamic light scattering measurements showed that these block copolymers form polymeric micelles in water with a size of around 50 nm by heating of an aqueous polymer solution from below to above the critical micelle temperature (cmt). The critical micelle concentration as well as the cmt decreased with increasing pHPMAmDL block lengths, which can be attributed to the greater hydrophobicity of the thermosensitive block with increasing molecular weight. Cryogenic transmission electron microscopy analysis revealed that the micelles have a spherical shape with a narrow size distribution. 1H NMR measurements in D2O showed that the intensity of the peaks of the protons from the pHPMAmDL block significantly decreased above the cmt, indicating that the thermosensitive blocks indeed form the solidlike core of the micelles. Static light scattering measurements demonstrated that pHPMAmDL-b-PEG micelles with relatively large pHPMAmDL blocks possess a highly packed core that is stabilized by a dense layer of swollen PEG chains. FT-IR analysis indicated that dehydration of amide bonds in the pHPMAmDL block occurs when the polymer dissolved in water is heated from below to above its cmt. The micelles were stable when an aqueous solution of micelles was incubated at 37 degrees C and at pH 5.0, where the hydrolysis rate of lactate side groups is minimized. On the other hand, at pH 9.0, where hydrolysis of the lactic acid side groups occurs, the micelles started to swell after 1.5 h of incubation and complete dissolution of micelles was observed after 4 h as a result of hydrophilization of the thermosensitive block. Fluorescence spectroscopy measurements with pyrene loaded in the hydrophobic core of the micelles showed that when these micelles were incubated at pH 8.6 and at 37 degrees C the microenvironment of pyrene became increasingly hydrated in time during this swelling phase. The results demonstrate the potential applicability of pHPMAmDL-b-PEG block copolymer micelles for the controlled delivery of hydrophobic drugs.     

Rheological behavior of aqueous micellar solutions of a triblock copolymer of ethylene oxide and 1,2-butylene oxide: B10E410B10

A triblock copolymer of ethylene oxide and 1,2-butylene oxide, denoted B10E410B10, was prepared by sequential oxyanionic polymerization and characterized by 13C NMR spectroscopy and gel permeation chromatography. Micellization and the formation of micelle clusters in dilute aqueous solution, the latter a consequence of micelle bridging, was confirmed by dynamic light scattering, and average association numbers of the micelles were determined by static light scattering for T = 20-40 degrees C. The frequency dependence of the dynamic storage and loss moduli was investigated for solutions in the range of 5-20 wt %. Comparison with results for poly(oxyethylene) dialkyl ethers (10 wt %, T = 25 degrees C) indicated that the viscoelasticity of a copolymer with terminal B10 hydrophobic blocks was roughly equivalent to one with terminal C14 alkyl chains. The temperature dependence of the modulus was investigated for 15 wt % solutions at T = 5-40 degrees C. Superposition of the data led, via an Arrhenius plot, to an activation energy for the relaxation process of -40 kJ mol(-1). The negative value contrasts with the positive values found for poly(oxyethylene) dialkyl ethers and related HEUR copolymers with urethane-linked terminal alkyl chains. This difference is attributed to the block-length distribution in copolymer B10E410B10, whereby the activation energy of the relaxation process has a positive contribution from the disengagement of B blocks from micelles but a negative contribution from micellization. The negative value of the activation energy for solutions of B10E410B10 was confirmed by determining the temperature dependence of the zero-shear viscosity of its 15 wt % solution.     

Supramolecular self-assembly of multiblock copolymers in aqueous solution

A unique pH-dependent phase behavior from a copolymer micellar solution to a collapsed hydrogel with micelles ordered in a hexagonal phase was observed. Small-angle neutron scattering (SANS) was used to follow the pH-dependent structural evolution of micelles formed in a solution of a pentablock copolymer consisting of poly((diethylaminoethyl methacrylate)-b-(ethylene oxide)-b-(propylene oxide)-b-(ethylene oxide)-b-(diethylaminoethyl methacrylate)) (PDEAEM25-b-PEO100-b-PPO65-b-PEO100-b-PDEAEM25). Between pH 3.0 and pH 7.4, we observed the presence of charged spherical micelles. Increasing the pH of the micelle solution above pH 7.4 resulted in increasing the size of the micelles due to the increasing hydrophobicity of the PDEAEM blocks above their pKa of 7.6. The increase in size of the spherical micelles resulted in a transition to a cylindrical micelle morphology in the pH range 8.1-10.5, and at pH >11, the copolymer solution undergoes macroscopic phase separation. Indeed, the phase separated copolymer sediments and coalesces into a hydrogel structure that consists of 25-35 wt % water. Small-angle X-ray scattering (SAXS) clearly indicated that the hydrogel has a hexagonal ordered phase. Interestingly, the process is reversible, as lowering of the pH below 7.0 leads to rapid dissolution of the solid into homogeneous solution. We believe that the hexagonal structure in the hydrogel is a result of the organization of the cylindrical micelles due to the increased hydrophobic interactions between the micelles at 70 degrees C and pH 11. Thus we have developed a pH-/temperature-dependent, reversible hierarchically self-assembling block copolymer system with structures spanning nano- to microscale dimensions.     

Precisely installing gold nanoparticles at the core/shell interface of micellar assemblies of triblock copolymers

Two reduction-cleavable ABA triblock copolymers possessing two disulfide linkages, PMMA-ss-PMEO₃MA-ss-PMMA and PDEA-ss-PEO-ss-PDEA were synthesized via facile substitution reactions from homopolymer precursors, where PMMA, PMEO₃MA, PDEA, and PEO represent poly(methyl methacrylate), poly(tri(ethylene glycol) monomethyl ether methacrylate, poly(2-(diethylamino)ethyl methacrylate), and poly(ethylene oxide), respectively. Spherical micelles were obtained through supramolecular self-assembly of these two triblock copolymers in aqueous solutions. The resultant micelles with abundant disulfide bonds could serve as soft templates and precisely accommodate gold nanoparticles in the core/shell interface as a result of the formation of Au-S bonds.     

Microviscosity in multiple regions of complex aqueous solutions of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide)

Aqueous poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO109-PPO41-PEO109) copolymers are nonionic surfactants that self-organize to form aggregate structures with increasing temperature or concentration. We have studied two concentrations over a range of temperatures so that the copolymers are in one of three microphases: unimers, micelles, or hydrogels formed from body centered cubic aggregates of micelles. Three different coumarin dyes were chosen based on their hydrophobicity so that different aggregate regions could be probed independently-water insoluble coumarin 153 (C153), hydrophobic coumarin 102 (C102), and the hydrophilic sodium carboxylate form of coumarin 343 (C343-). Fluorescence anisotropy experiments provide detailed information on the local microviscosity. C153 experiences a fourfold increase in reorientation time and hence microviscosity with increasing temperature through the microphase transition from unimers to micelles. C102 also shows an increase in microviscosity with temperature but smaller in magnitude and with the microphase transition shifted to higher temperature relative to C153. C343- shows only a slight sensitivity to the microphase transition. For any of the three coumarin probes, fluorescence anisotropies do not show any correlation with the microphase transition to form cubic hydrogels.     

Brush-type amphiphilic diblock copolymers from "living"/controlled radical polymerizations and their aggregation behavior

Two brush-type amphiphilic diblock copolymers, poly(poly(ethylene glycol)methyl ether methacrylate-block-polystyrene) (P(PEGMA)-b-PS) and poly(glycidyl methacrylate)-block-poly(poly(ethylene glycol)methyl ether methacrylate) (P(GMA)-b-P(PEGMA)) were synthesized, respectively, via consecutive atom-transfer radical polymerizations (ATRPs) and reversible addition-fragmentation chain-transfer (RAFT) polymerizations. The diblock copolymers were characterized by gel permeation chromatography (GPC), (1)H nuclear magnetic resonance (NMR) spectroscopy, and FT-IR spectroscopy. The aggregation behavior of the two amphiphilic diblock copolymers in water was also studied. Scanning electron and transmission electron microscopic images revealed that spherical micelles (40-80 nm in diameter) from self-assembly of the P(PEGMA)-b-PS copolymers and wormlike micelles (60-120 nm in length and 20-30 nm in diameter) from self-assembly of the P(GMA)-b-P(PEGMA) copolymers were prevalent. The spherical P(PEGMA)-b-PS micelles could self-assemble gradually into giant aggregates of several micrometers in diameter.     

Cylindrical micelles from the aqueous self-assembly of an amphiphilic poly(ethylene oxide)-b-poly(ferrocenylsilane) (PEO-b-PFS) block copolymer with a metallo-supramolecular linker at the block junction

A supramolecular AB diblock copolymer has been prepared by the sequential self-assembly of terpyridine end-functionalized polymer blocks by using Ru(III)/Ru(II) chemistry. By this synthetic strategy a hydrophobic poly(ferrocenylsilane) (PFS) was attached to a hydrophilic poly(ethylene oxide) (PEO) block to give an amphiphilic metallo-supramolecular diblock copolymer (PEO/PFS block ratio 6:1). This compound was used to form micelles in water that were characterized by a combination of dynamic and static light scattering, transmission electron microscopy, and atomic force microscopy. These complementary techniques showed that the copolymers investigated form rod-like micelles in water; the micelles have a constant diameter but are rather polydisperse in length, and light scattering measurements indicate that they are flexible. Crystallization of the PFS in these micelles was observed by differential scanning calorimetry, and is thought to be the key behind the formation of rod-like structures. The cylindrical micelles can be cleaved into smaller rods whenever the temperature of the solution is increased or they are exposed to ultrasound.