Effect of nanoparticles on the interfacial properties of liquid/liquid and liquid/air surface layers

An investigation is reported on the interfacial properties of nanometric colloidal silica dispersions in the presence of a cationic surfactant. These properties are the result of different phenomena such as the particle attachment at the interface and the surfactant adsorption at the liquid and at the particle interfaces. Since the latter strongly influences the hydrophobicity/lipophilicity of the particle, i.e., the particle affinity for the fluid interfacial environment, all those phenomena are closely correlated. The equilibrium and dynamic interfacial tensions of the liquid/air and liquid/oil interfaces have been measured as a function of the surfactant and particle concentration. The interfacial rheology of the same systems has been also investigated by measuring the dilational viscoelasticity as a function of the area perturbation frequency. These results are then crossed with the values of the surfactant adsorption on the silica particles, indirectly estimated through experiments based on the centrifugation of the dispersions. In this way it has been possible to point out the mechanisms determining the observed kinetic and equilibrium features. In particular, an important role in the mixed particle-surfactant layer reorganization is played by the Brownian transport of particles from the bulk to the interface and by the surfactant redistribution between the particle and fluid interface.     

Engineering shapes of active colloids for tunable dynamics

Active particles can autonomously propel and have the tendency to organize into high-order ensembles and phases that evolve and reconfigure. They have emerged as a focused subject in contemporary colloid science, holding great promise in advancing fields, such as cargo delivery, sensing, micromachinery and microrobotics, and materials science. Realization of the full potentials of active particles requires delicate control of their dynamics in propulsion and assembly, which is challenging due to the out-of-equilibrium nature of such systems. Recently, systematically engineered colloidal shapes have been exploited as an effective means to tune and even program the dynamic behaviors of active particles. Various anisotropic particles, with controlled geometries and possessing either homogeneous or heterogeneous composition, have been fabricated, regulating how particles actively propel, interact, and assemble under several chemical and physical stimuli. In this paper, we provide an overview of these progresses. We also briefly discuss our view on the future directions and challenges.     

Stabilization of oil-in-water emulsions by colloidal particles modified with short amphiphiles

Emulsions stabilized through the adsorption of colloidal particles at the liquid-liquid interface have long been used and investigated in a number of different applications. The interfacial adsorption of particles can be induced by adjusting the particle wetting behavior in the liquid media. Here, we report a new approach to prepare stable oil-in-water emulsions by tailoring the wetting behavior of colloidal particles in water using short amphiphilic molecules. We illustrate the method using hydrophilic metal oxide particles initially dispersed in the aqueous phase. The wettability of such particles in water is reduced by an in situ surface hydrophobization that induces particle adsorption at oil-water interfaces. We evaluate the conditions required for particle adsorption at the liquid-liquid interface and discuss the effect of the emulsion initial composition on the final microstructure of oil-water mixtures containing high concentrations of alumina particles modified with short carboxylic acids. This new approach for emulsion preparation can be easily applied to a variety of other metal oxide particles.     

Tailoring the interfacial assembly of colloidal particles by engineering the mechanical properties of the interface

Fluid interfaces can be used as a platform for promoting the direct and spontaneous self-assembly of colloidal particles, where the driving force is the reduction in interfacial energy. In addition, fluid interfaces allow fine-tuning of the particles ensemble by an external force, such as the presence of an imposed interfacial flow, or by engineering the interparticle interactions dictated by the interplay of interfacial forces. As a consequence, a wide-ranging set of interfacial structures can be achieved from liquid-like layers, which can flow under stress, to amorphous solids that are able to sustain static stress. Here, far from a comprehensive overview of the interfacial assembly of colloidal particles, different ways of tailoring it by rationally designing the rheological properties of the interface are provided, with a focus on experimental and theoretical methods and model systems that have been recently exploited. In particular, ligand-coated nanoparticles, with a strong emphasis on the effect of the ligands on the interfacial structure and the rheological properties, and soft nanogel particles, in which an environmental factor, such as the temperature, drives to different interfacial structures and mechanical responses will be further discussed.     

胶体颗粒稳定的界面及胶体颗粒在界面的相互作用

Particle-stabilized dispersions such as emulsions, foams and bubbles are catching increasing attentions across a number of research areas. The adsorption mechanism and role of these colloidal particles in stabilizing the oil-water or gas-water interfaces and how these particles interact at interfaces are vital to the practical use of these dispersion systems. Although there have been intensive investigations, problems associated with the stabilization mechanisms and particle-particle interactions at interfaces still remain to explore. In this paper, we first systematically review the historical understanding of particle-stabilized emulsions or bubbles and then give an overview of the most important and well-established progress in the understanding of particle-stabilized systems, including emulsions, foams and liquid marbles. The particle-adsorption phenomena have long been realized and been discussed in academic paper for more than one century and a quantitative model was proposed in the early 1980s. The theory can successfully explain the adsorption of solid particles onto interface from energy reduction approaches. The stability of emulsions and foams can be readily correlated to the wettability of the particles towards the two phases. And extensive researches on emulsion stability and various strategies have been developed to prepared dispersion systems with a certain trigger such as pH and temperature. After that, we discuss recent development of the interactions between particles when they are trapped at the interface and highlight open questions in this field. There exists a huge gap between theoretical approaches and experimental results on the interactions of particles adsorbed at interfaces due to demanding experimental devices and skills. In practice, it is customary to use flat surfaces/interfaces as model surfaces to investigate the particle-particle at interfaces although most of the time interfaces are produced with a certain curvature. It is shown that the introduction of particles onto interfaces can generate charges at the interfaces which could possibly account for the long range electrostatic interactions. Finally, we illustrate that particle-stabilized dispersions have been found wide applications in many fields and applications such as microcapsules, food, biomedical carriers, and dry water. One of the most investigated areas is the microencapsulation of actives based on Pickering emulsion templates. The particles adsorbed at the interface can serve as interfacial stabilizers as well as constituting components of shells of colloidal microcapsules. Emulsions stabilized by solid particles derived from natural and bio-related sources are promising platforms to be applied in food related industries. Emulsion systems stabilized by solid particles of the w/w (water-in-water) feature are discussed. This special type of emulsion is attracting increasing attentions due to their all water features. Besides of oil-water interface, particle stabilized air-water interface share similar stabilization mechanism and several applications reported in the literature are subsequently discussed. We hope that this paper can encourage more scientists to engage in the studies of particle-stabilized interfaces and more novel applications can be proposed based on this mechanism     

Janus and patchy colloids at fluid interfaces

Understanding the fundamental behavior of chemically anisotropic Janus and patchy particles at fluid interfaces enables utilization of these colloids as solid surfactants for stabilization of emulsions and as building blocks for fabrication of functional and responsive materials. Here, we review recent progress on understanding the combined effects of particle–interface and particle–particle interactions on the surface activity and organization of Janus and patchy particles at fluid interfaces. We also highlight recent developments that harness these fundamental properties for applications in self-assembly and emulsion stabilization, and discuss some of the outstanding questions that warrant future investigation. The progress in the field opens new opportunities to pursue techniques for controlling interfacial rheology, directed motion, and the formulation of novel soft materials.     

Colloidal wettability probed with X-ray microscopy

Colloids (colloidal particles or nanoparticles) and their in-situ characterizations are important topics in colloid and interface science. In-situ visualization of colloids with X-ray microscopy is a growing frontier. Here, after a brief introduction on the method, we focus on its application for identifying nanoscale wettability of colloidal particles at fluid interfaces, which is a critical factor in colloidal self-assembly. We discuss a quantitative study on colloidal wettability with two microscopic methods: (i) X-ray microscopy by visualizing natural oil–water interfaces and (ii) confocal microscopy by visualizing fluorescently-labeled interfaces. Both methods show consistent estimation results in colloid–fluid interfacial tensions. This comparison strongly suggests a feasibility of X-ray microscopy as a promising in-situ protocol in colloid research, without fluorescent staining. Finally, we address a prospect of X-ray imaging for colloid and interface science.     

Surface activity of solid particles with extremely rough surfaces

The solid particles are adsorbed at liquid-liquid interfaces and form self-assembled structures when the particles have suitable wettability to both liquids. Here, we show theoretically how the extreme roughness on the particle surface affects their adsorption properties. In our previous work, we discussed the adsorption behavior of the solid particles with microstructured surfaces using the so-called Wenzel model [Y. Nonomura et al., J. Phys. Chem. B 110 (2006) 13124]. In the present study, the wettability and the adsorbed position of the particles with extremely rough surfaces are studied based on the Cassie-Baxter model. We predict that the adsorbed position and the interfacial energy depend on the interfacial tensions between the solid and liquid phases, the radius of the particle, and the fraction of the particle surface area that is in contact with the external liquid phase. Interestingly, the initial state of the system governs whether the particle is adsorbed at the interface or not. The shape of the particle is also an important factor which governs the adsorbed position. The disk-shaped particle and the spherical particle which is partially covered with the extremely rough surface, i.e. Janus particle, are adsorbed at the liquid-liquid interface in an oriented state. We should consider not only the interfacial tensions, but also the surface structure and the particle shape to control the adsorption behavior of the particle.     

Kinetics of colloidal templating using emulsion drop consolidation

The emulsion templating of ordered colloidal microsphere assemblies by Manoharan et al. involves a consolidation process where dispersed phase fluid is transported from droplets into a continuous phase. Consolidation can be approximated as a diffusion process with moving boundaries. The kinetics of consolidation are investigated here by following droplet shrinkage with time as a prelude to understanding rate effects on assembly structure. Consolidation kinetics are influenced by liquid diffusivity, the number of colloidal particles in a droplet, and the surfactant concentration. While surfactant exhibits little effect well below its critical micelle concentration (CMC) value, it significantly slows consolidation above the CMC. For a specific continuous phase (i.e., silicone oil and fluorinated silicone oil), with proper scalings, the droplet size shrinks with time following a power law independent of droplet diameter, surfactant concentrations, and particle number concentration. The power law exponent varies from 1/2 to 2/3 with different continuous oil phases as a result of concentration and interfacial effects. This study leads to an improved understanding of colloidal microstructure development at interfaces that can be applied in novel materials synthesis and drug delivery areas.     

Particle self-assembly in ionic liquid-in-water Pickering emulsions

We report the self-assembly of a single species or a binary mixture of microparticles in ionic liquid-in-water Pickering emulsions, with emphases on the interfacial self-assembled particle structure and the partitioning preference of free particles in the dispersed and continuous phases. The particles form monolayers at ionic liquid-water interfaces and are close-packed on fully covered emulsion droplets or aggregated on partially covered droplets. In contrast to those at oil-water interfaces, no long-range-ordered colloidal lattices are observed. Interestingly, other than equilibrating at the ionic liquid-water interfaces, the microparticles also exhibit a partitioning preference in the dispersed and continuous phases: the sulfate-treated polystyrene (S-PS) and aldehyde-sulfate-treated polystyrene (AS-PS) microparticles are extracted to the ionic liquid phase with a high extraction efficiency, whereas the amine-treated polystyrene (A-PS) microparticles remain in the water phase.     

Light scattering near and from interfaces using evanescent wave and ellipsometric light scattering

The broad range of interface light scattering investigations in recent years shows the power and the versatility of these techniques to address new and open questions in colloid and interface science and the soft condensed matter field. Structural information for polymers, liquid crystals, or colloids close to planar or spherical colloidal interfaces are either captured with long range light scattering resolution, or in a complementary approach by high resolution ellipsometric techniques. Of special interest is the dynamic behavior close to or in interfaces, since it determines material properties and responses to external fields. Due to the broad dynamical range and the high scattering contrast for visible light, interface light scattering is a key to elucidate soft matter interfacial dynamics. This contribution reviews experimental and related theoretical approaches for interface light scattering and further gives an overview of achievements based on such techniques.     

Pickering emulsions: wetting and colloidal stability of hairy particles--a self-consistent field theory

The assembly of sterically stabilized colloids at liquid-liquid interfaces is studied with the self-consistent field (SCF) theory using the discretization scheme that was developed by Scheutjens, Fleer, and co-workers. The model is based on a poly(methyl methacrylate) (pMMA) particle with poly(isobutylene) (pIB) grafted to the surface. The stabilizing groups on the particle surface have a significant effect on the interfacial assembly and, therefore, also on the formation and properties of Pickering emulsions. The wetting behavior of the particle is altered by the presence of the stabilizing groups, which affects the equilibrium position of the particles at the interface. The stabilizing groups can also lead to an activation barrier before interfacial adsorption, analogous to the steric repulsion between two particles. These effects are numerically solved with the SCF theory. It is commonly known that flocculating conditions enhance the interfacial adsorption and yield stable Pickering emulsions, which is confirmed in this work. Additionally, it is concluded that those conditions are not an absolute requirement. There is a window of stabilizer concentrations Γ(pIB), 2.2-3.3 mg/m(2) pIB, that shows both partial wetting and colloidal stability. The activation barrier for interfacial assembly is 140-550 k(B)T and is an order of magnitude higher than the colloidal stability. The difference can be attributed to the unfavorable interaction of pIB with water and a difference in geometry (plate-sphere vs sphere-sphere). This study demonstrates the interplay and provides a quantitative comparison between the wetting behavior and the colloidal stability, and it gives a better understanding of the colloidal assembly at soft interfaces and formation of Pickering emulsions in general.     

Particle laden fluid interfaces: Dynamics and interfacial rheology

We review the dynamics of particle laden interfaces, both particle monolayers and particle + surfactant monolayers. We also discuss the use of the Brownian motion of microparticles trapped at fluid interfaces for measuring the shear rheology of surfactant and polymer monolayers. We describe the basic concepts of interfacial rheology and the different experimental methods for measuring both dilational and shear surface complex moduli over a broad range of frequencies, with emphasis in the micro-rheology methods. In the case of particles trapped at interfaces the calculation of the diffusion coefficient from the Brownian trajectories of the particles is calculated as a function of particle surface concentration. We describe in detail the calculation in the case of subdiffusive particle dynamics. A comprehensive review of dilational and shear rheology of particle monolayers and particle + surfactant monolayers is presented. Finally the advantages and current open problems of the use of the Brownian motion of microparticles for calculating the shear complex modulus of monolayers are described in detail.     

AC electrohydrodynamic propulsion and rotation of active particles of engineered shape and asymmetry

This review presents the recent progress in the development of active particles driven by alternating-current (AC) electrokinetic effects. These particles propel by asymmetrically dissipating the external energy provided by the fields. An AC field can trigger several electrohydrodynamic mechanisms depending on the field frequency and amplitude, which can also control particle–particle interactions and collective behavior. Recently there has been a strong focus on powering and controlling the motion of self-propelling particles with engineered shape, size, and composition. We introduce a tiered classification of AC field-driven active particles and discuss the fundamental electrohydrodynamic effects acting in individual and multi-particle systems. Finally, we address the limitations and challenges in the current state of AC-field driven engineered particles.     

胶体颗粒在液-液界面上的吸附行为及界面组装

综述了胶体颗粒在油水界面上的吸附行为及其应用。胶体颗粒在界面上的吸附行为主要受颗粒大小、相互作用力、电性质及润湿性质等因素的影响。本文第一部分主要从作用力出发阐述了胶体颗粒在液-液吸附过程中各种影响因素的理论研究进展;第二部分主要阐述了胶体颗粒在液-液界面上的吸附能够在界面组装、乳液和具有特殊功能的新材料制备等领域中的应用。     

胶体颗粒在液-液界面上的吸附行为及界面组装

综述了胶体颗粒在油水界面上的吸附行为及其应用.胶体颗粒在界面上的吸附行为主要受颗粒大小、相互作用力、电性质及润湿性质等因素的影响.本文第一部分主要从作用力出发阐述了胶体颗粒在液-液吸附过程中各种影响因素的理论研究进展;第二部分主要阐述了胶体颗粒在液-液界面上的吸附能够在界面组装、乳液和具有特殊功能的新材料制备等领域中的应用.     

Neutron reflectivity and small angle neutron scattering: An introduction and perspective on recent progress

In recent years both neutron reflectivity, NR, and small angle neutron scattering, SANS, have been applied to the study of increasingly complex surface and interfacial properties. The methodology and advantages of using these neutron scattering techniques to probe surfaces and interfaces will be briefly outlined. Some recent examples of surfactant, polymer and polymer–surfactant adsorption at the air–water, liquid–solid, and liquid–liquid planar interfaces are highlighted. These are contrasted by some examples of the nature of adsorption on colloidal sol particles and emulsion droplets.     

Connect the drops: using solids as adhesives for liquids

Colloidal particles are shown to be capable of developing adhesion between liquid phases through a bridging mechanism by which intervening, micrometer-scaled, fluid films are stabilized. Particle dynamics leading to the assembly of the stabilizing structure are discussed. Models for the resulting adhesive force are developed from considerations of both interface shape perturbation and the force applied by surface tension on an individual particle. Finally, predictions from these models are compared to direct measurements of the forces that arise during the separation of adhering interfaces. Such comparisons lead to a novel method for determining the three-phase contact angle inherent to particles residing at fluid interfaces.     

Nonlinear rheology of complex fluid–fluid interfaces

Fluid–fluid interfaces stabilized by proteins, protein aggregates, polymers, or colloidal particles, tend to have a complex microstructure. Their response to an applied deformation is often highly nonlinear, even at small deformation (rates). The nonlinearity of the response is a result of changes in the interfacial microstructure. Most of the studies on interfacial rheology of complex interfaces currently available in the scientific literature, focus on the linear response regime. Since multiphase systems such as emulsions or foam are routinely exposed to large and fast deformations, characterization of the nonlinear response of complex interfaces is highly relevant. In this paper we review the recent work on nonlinear rheology of complex interfaces, both in shear and dilatational deformations. We also discuss several methods currently available for analyzing nonlinear interfacial rheology data, and recent progress in modeling nonlinear interfacial rheology, using nonequilibrium thermodynamic frameworks.