Novel synthesis of nanocomposite for the extraction of Sildenafil Citrate (Viagra) from water and urine samples: Process screening and optimization

A sensitive analytical method is investigated to concentrate and determine trace level of Sildenafil Citrate (SLC) present in water and urine samples. The method is based on a sample treatment using dispersive solid-phase micro-extraction (DSPME) with laboratory-made Mn@ CuS/ZnS nanocomposite loaded on activated carbon (Mn@ CuS/ZnS-NCs-AC) as a sorbent for the target analyte. The efficiency was enhanced by ultrasound-assisted (UA) with dispersive nanocomposite solid-phase micro-extraction (UA-DNSPME). Four significant variables affecting SLC recovery like; pH, eluent volume, sonication time and adsorbent mass were selected by the Plackett-Burman design (PBD) experiments. These selected factors were optimized by the central composite design (CCD) to maximize extraction of SLC. The results exhibited that the optimum conditions for maximizing extraction of SLC were 6.0 pH, 300 μL eluent (acetonitrile) volume, 10 mg of adsorbent and 6 min sonication time. Under optimized conditions, virtuous linearity of SLC was ranged from 30 to 4000 ng mL⁻¹ with R² of 0.99. The limit of detection (LOD) was 2.50 ng mL⁻¹ and the recoveries at two spiked levels were ranged from 97.37 to 103.21% with the relative standard deviation (RSD) less than 4.50% (n = 15). The enhancement factor (EF) was 81.91. The results show that the combination UAE with DNSPME is a suitable method for the determination of SLC in water and urine samples.     

Trace determination of safranin O dye using ultrasound assisted dispersive solid-phase micro extraction: Artificial neural network-genetic algorithm and response surface methodology

In this study, ultrasound assisted dispersive solid-phase micro extraction combined with spectrophotometry (USA-DSPME-UV) method based on activated carbon modified with Fe₂O₃ nanoparticles (Fe₂O₃-NPs-AC) was developed for pre-concentration and determination of safranin O (SO). It is known that the efficiency of USA-DSPME-UV method may be affected by pH, amount of adsorbent, ultrasound time and eluent volume and the extent and magnitude of their contribution on response (in term of main and interaction part) was studied by using central composite design (CCD) and artificial neural network-genetic algorithms (ANN-GA). Accordingly by adjustment of experimental conditions suggested by ANN-GA at pH 6.5, 1.1 mg of adsorbent, 10 min ultrasound and 150 μL of eluent volume led to achievement of best operation performance like low LOD (6.3 ng mL⁻¹) and LOQ (17.5 ng mL⁻¹) in the range of 25–3500 ng mL⁻¹. In following stage, the SO content in real water and wastewater samples with recoveries between 93.27–99.41% with RSD lower than 3% was successfully determined.     

Optimization of ultrasound-assisted dispersive solid-phase microextraction based on nanoparticles followed by spectrophotometry for the simultaneous determination of dyes using experimental design

A simple, low cost and ultrasensitive method for the simultaneous preconcentration and determination of trace amount of auramine-O and malachite green in aqueous media following accumulation on novel and lower toxicity nanomaterials by ultrasound-assisted dispersive solid phase micro-extraction (UA-DSPME) procedure combined with spectrophotometric has been described. The Mn doped ZnS nanoparticles loaded on activated carbon were characterized by Field emission scanning electron microscopy (FE-SEM), particle size distribution, X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR) analyses and subsequently were used as green and efficient material for dyes accumulation. Contribution of experimental variables such as ultrasonic time, ultrasonic temperature, adsorbent mass, vortex time, ionic strength, pH and elution volume were optimized through experimental design, and while the preconcentrated analytes were efficiently eluted by acetone. Preliminary Plackett–Burman design was applied for selection of most significant factors and giving useful information about their main and interaction part of significant variables like ultrasonic time, adsorbent mass, elution volume and pH were obtained by central composite design combined with response surface analysis and optimum experimental conditions was set at pH of 8.0, 1.2 mg of adsorbent, 150 μL eluent and 3.7 min sonication. Under optimized conditions, the average recoveries (five replicates) for two dyes (spiked at 500.0 ng mL⁻¹) changes in the range of 92.80–97.70% with acceptable RSD% less than 4.0% over a linear range of 3.0–5000.0 ng mL⁻¹ for the AO and MG in water samples with regression coefficients (R²) of 0.9975 and 0.9977, respectively. Acceptable limits of detection of 0.91 and 0.61 ng mL⁻¹ for AO and MG, respectively and high accuracy and repeatability are unique advantages of present method to improve the figures of merit for their accurate determination at trace level in complicated materials.     

Rapid ultrasound-assisted magnetic microextraction of gallic acid from urine,plasma and water samples by HKUST-1-MOF-Fe3O4-GA-MIP-NPs: UV–vis detection and optimization study

Magnetite (Fe₃O₄ nanoparticles (NPs)) HKUST-1 metal organic framework (MOF) composite as a support was used for surface imprinting of gallic acid imprinted polymer (HKUST-1-MOF-Fe₃O₄-GA-MIP) using vinyltrimethoxysilane (VTMOS) as the cross-linker. Subsequently, HKUST-1-MOF-Fe₃O₄-NPs-GA-MIP characterized by FT-IR, XRD and FE-SEM analysis and applied for fast and selective and sensitive ultrasound assisted dispersive magnetic solid phase microextraction of gallic acid (GA) by UV–Vis (UA-DMSPME-UV-Vis) detection method. Plackett–Burman design (PBD) and central composite design (CCD) according to desirability function (DF) indicate the significant variables among the extraction factors vortex (mixing) time (min), sonication time (min), temperature (°C), eluent volume (L), pH and HKUST-1-MOF-Fe₃O₄-NPs-GA-MIP mass (mg) and their contribution on the response. Optimum conditions and values correspond to pH, HKUST-1-MOF-Fe₃O₄-NPs-GA-MIP mass, sonication time and the eluent volume were set as follow 3.0, 1.6 mg, 4.0 min and 180 μL, respectively. The average recovery (ER%) of GA was 98.13% with desirability of 0.997, while the present method has best operational performance like wide linear range 8–6000 ng mL⁻¹ with a Limit of detection (LOD) of 1.377 ng mL⁻¹, limit of quantification (LOQ) 4.591 ng mL⁻¹ and precision (<3.50% RSD). The recovery of GA in urine, human plasma and water samples within the range of 92.3–100.6% that strongly support high applicability of present method for real samples analysis, which candidate this method as promise for further application.     

Ultrasound assisted extraction of Maxilon Red GRL dye from water samples using cobalt ferrite nanoparticles loaded on activated carbon as sorbent: Optimization and modeling

In this research, a selective, simple and rapid ultrasound assisted dispersive solid-phase micro-microextraction (UA-DSPME) was developed using cobalt ferrite nanoparticles loaded on activated carbon (CoFe₂O₄-NPs-AC) as an efficient sorbent for the preconcentration and determination of Maxilon Red GRL (MR-GRL) dye. The properties of sorbent are characterized by X-ray diffraction (XRD), Transmission Electron Microscopy (TEM), Vibrating sample magnetometers (VSM), Fourier transform infrared spectroscopy (FTIR), Particle size distribution (PSD) and Scanning Electron Microscope (SEM) techniques. The factors affecting on the determination of MR-GRL dye were investigated and optimized by central composite design (CCD) and artificial neural networks based on genetic algorithm (ANN-GA). CCD and ANN-GA were used for optimization. Using ANN-GA, optimum conditions were set at 6.70, 1.2 mg, 5.5 min and 174 μL for pH, sorbent amount, sonication time and volume of eluent, respectively. Under the optimized conditions obtained from ANN-GA, the method exhibited a linear dynamic range of 30–3000 ng mL⁻¹ with a detection limit of 5.70 ng mL⁻¹. The preconcentration factor and enrichment factor were 57.47 and 93.54, respectively with relative standard deviations (RSDs) less than 4.0% (N = 6). The interference effect of some ions and dyes was also investigated and the results show a good selectivity for this method. Finally, the method was successfully applied to the preconcentration and determination of Maxilon Red GRL in water and wastewater samples.     

Ultrasound assisted combined molecularly imprinted polymer for selective extraction of nicotinamide in human urine and milk samples: Spectrophotometric determination and optimization study

Ultrasound-assisted dispersive solid phase microextraction followed by UV–vis spectrophotometer (UA-DSPME-UV–vis) was designed for extraction and preconcentration of nicotinamide (vitamin B₃) by HKUST-1 metal organic framework (MOF) based molecularly imprinted polymer (MIP). This new material was characterized by FTIR and FE-SEM techniques. The preliminary Plackett–Burman design was used for screening and subsequently the central composite design justifies significant terms and possible construction of mathematical equation which give the individual and cooperative contribution of variables like HKUST-1-MOF-NA-MIP mass, sonication time, temperature, eluent volume, pH and vortex time. Accordingly the optimum condition was set as: 2.0 mg HKUST-1-MOF-NA-MIP, 200 μL eluent and 5.0 min sonication time in center points other variables were determined as the best conditions to reach the maximum recovery of the analyte. The UA-DSPME-UV–vis method performances like excellent linearity (LR), limits of detection (LOD), limits of quantification of 10–5000 μg L⁻¹ with R² of 0.99, LOD (1.96 ng mL⁻¹), LOQ (6.53 μg L⁻¹), respectively show successful and accurate applicability of the present method for monitoring analytes with within- and between-day precision of 0.96–3.38%. The average absolute recoveries of the nicotinamide extracted from the urine, milk and water samples were 95.85–101.27%.     

Dispersion of hydrophobic magnetic nanoparticles using ultarsonic-assisted in combination with coacervative microextraction for the simultaneous preconcentration and determination of tricyclic antidepressant drugs in biological fluids

A two-step sample preparation technique based on dispersive micro solid-phase extraction combined with coacervative microextraction is presented for preconcentration and determination of tricyclic antidepressant drugs in biological samples. An important feature of the method is the application of hydrophobic magnetic nanoparticles, which in combination with coacervative microextraction method enables development of rapid and efficient extraction procedure in order to achievement of a high extraction efficiency. Simultaneous optimization by experimental design lead to improvement of method with low cost which supply useful information about interaction among variables. Under the optimized conditions, a linear range of 5–1000 ng mL⁻¹ with detection limits from 0.51 to 1.4 ng mL⁻¹ were obtained for target analytes. The method was successfully used for the determination of analytes in biological fluids (plasma and urine) with relative recoveries in the range of 89–105% (RSDs < 3.5%).     

Fe3O4/hydroxyapatite/graphene quantum dots as a novel nano-sorbent for preconcentration of copper residue in Thai food ingredients: Optimization of ultrasound-assisted magnetic solid phase extraction

Fe₃O₄/hydroxyapatite/graphene quantum dots (Fe₃O₄/HAP/GQDs) nanocomposite was synthesized and used as a novel magnetic adsorbent. This nanocomposite was characterized using scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, energy dispersive X-ray spectroscopy, and magnetization property. The Fe₃O₄/HAP/GQDs was applied to pre-concentrate copper residues in Thai food ingredients (so-called “Tom Yum Kung”) prior to determination by inductively coupled plasma-atomic emission spectrometry. Based on ultrasound-assisted extraction optimization, various parameters affecting the magnetic solid-phase extraction, such as solution pH, amount of magnetic nanoparticles, adsorption and desorption time, and type of elution solvent and its concentration were evaluated. Under optimal conditions, the linear range was 0.05–1500 ng mL⁻¹ (R² > 0.999), limit of detection was 0.58 ng mL⁻¹, and limit of quantification was 1.94 ng mL⁻¹. The precision, expressed as the relative standard deviation of the calibration curve slope (n = 5), for intra-day and inter-day analyses was 0.87% and 4.47%, respectively. The recovery study of Cu for real samples was ranged between 83.5% and 104.8%. This approach gave the enrichment factor of 39.2, which guarantees trace analysis of Cu residues. Therefore, Fe₃O₄/HAP/GQDs can be a potential and suitable candidate for the pre-concentration and separation of Cu from food samples. It can easily be reused after treatment with deionized water.     

Ultrasound-promoted dispersive micro solid-phase extraction of trace anti-hypertensive drugs from biological matrices using a sonochemically synthesized conductive polymer nanocomposite

In this work, a rapid and efficient procedure named ultrasound meliorated dispersive micro solid-phase extraction followed by high performance liquid chromatography-ultra violet detection (US-D-μSPE-HPLC-UV) was developed for the pre-concentration of the main trace anti-hypertensive drugs in complex matrices. The basis of this procedure was a polypyrrole-sodium dodecylbenzenesulfonate/zinc oxide (PPy-DBSNa/ZnO) nanocomposite. It was readily synthesized by the impressive way of in situ sonochemical oxidative polymerization in the presence of some additives such as FeCl₃ and DBSNa, ultimately leading to the effective coating of PPy on the ZnO nanoparticle cores. Characterization of the proposed nanosorbent was performed by different techniques such as FESEM, XRD,EDX, and TGA, confirming the high quality and proper physico-chemical properties of the proposed sorbent. In order to better investigate the input variables, the central composite design (CCD) combined with the desirability function (DF) was utilized. The enriched optimum conditions consisted of the initial pH value of 11.8, 15 mg of the PPy-DBSNa/ZnO nanocomposite, a sonication time of 4.6 min, and 100 μL of methanol, resulting in maximum responses at a relatively low extraction time with a logical DF. Under the optimum conditions, good linearity (5–5000, 2.5–3500, and 2.5–3000 ng mL⁻¹ for metoprolol, propranolol, and carvedilol, respectively, with the correlation of determinations (R²s) higher than 0.99), low limits of detection (LODs) (0.8–1.5 ng mL⁻¹), proper repeatabilities (relative standard deviation values (RSDs) below 6.3%, n = 3), reasonable enrichment factors (EFs) (60–72), and good extraction recoveries (ERs) (higher than %75) were obtainable. These appropriate validations corroborated a good effectiveness of ultrasonic waves in the achievement of a supreme solid phase as well as a facile and efficient microextraction of the low therapeutic concentrations in human plasma and urine samples.     

Ultrasonic enhancement of the simultaneous removal of quaternary toxic organic dyes by CuO nanoparticles loaded on activated carbon: Central composite design,kinetic and isotherm study

Copper oxide nanoparticles loaded on activated carbon (CuO-NPs-AC) were prepared and fully analyzed and characterized with FE-SEM, XRD and FT-IR. Subsequently, this novel material was used for simultaneous ultrasound-assisted adsorption of brilliant green (BG), auramine O (AO), methylene blue (MB) and eosin yellow (EY) dyes. Problems regard to dyes spectra overlap in quaternary solution of this dyes were omitted by derivative spectrophotometric method. The best pH in quaternary system was studied by using one at a time method to achieved maximum dyes removal percentage. Subsequently, sonication time, adsorbent dosage and initial dyes concentrations influence on dyes removal was optimized by central composite design (CCD) combined with desirability function approach (DFA). Desirability score of 0.978 show optimum conditions set at sonication time (4.2 min), adsorbent mass (0.029 g), initial dyes concentration (4.5 mg L⁻¹). Under this optimum condition the removal percentage for MB, AO, EY and BG dyes 97.58, 94.66, 96.22 and 94.93, respectively. The adsorption rate well fitted by pseudo second-order while adsorption capacity according to the Langmuir model as best equilibrium isotherm model for BG, MB, AO and EY was 20.48, 21.26, 22.34 and 21.29 mg g⁻¹, respectively.     

Synthesis and application of molecularly imprinted nanoparticles combined ultrasonic assisted for highly selective solid phase extraction trace amount of celecoxib from human plasma samples using design expert (DXB) software

In this work molecular imprinted nanoparticles (MINPs) was synthesized and applied for ultrasonic assisted solid phase extraction of celecoxib (CEL) from human plasma sample following its combination by HPLC–UV. The MINPs were prepared in a non-covalent approach using methacrylic acid as monomer, CEL as template, ethylene glycol dimethacrylate as cross-linker, and 2,2-azobisisobutyronitrile (AIBN) as the initiator of polymerization. pH, volume of rinsing and eluent solvent and amount of sorbent influence on response were investigated using factorial experimental design, while optimum point was achieved and set as 250 mg sorbent, pH 7.0, 1.5 mL washing solvent and 2 mL eluent by analysis of results according to design expert (DX) software. At above specified conditions, CEL in human plasma with complicated matrices with acceptable high recoveries (96%) and RSD% lower than 10% was quantified and estimated.The proposed MISPE-HPLC–UV method has linear responses among peak area and concentrations of CEL in the range of 0.2–2000 μg L⁻¹, with regression coefficient of 0.98. The limit of detection (LOD) and quantification (LOQ) based on three and ten times of the noise of HPLC peaks correspond to blank solution were 0.08 and 0.18 μg L⁻¹, respectively.     

Application of ZnO nanorods loaded on activated carbon for ultrasonic assisted dyes removal: Experimental design and derivative spectrophotometry method

A method based on application of ZnO nanorods loaded on activated carbon (ZnO-NRs-AC) for adsorption of Bromocresol Green (BCG) and Eosin Y (EY) accelerated by ultrasound was described. The present material was synthesized under ultrasound assisted wet-chemical method and subsequently was characterized by FE-SEM, TEM, BET and XRD analysis. The extent of contribution of conventional variables like pH (2.0–10.0), BCG concentration (4–20 mg L⁻¹), EY concentration (3–23 mg L⁻¹), adsorbent dosage (0.01–0.03 g), sonication time (1–5 min) and centrifuge time (2–6 min) as main and interaction part were investigated by central composite design under response surface methodology. Analysis of variance (ANOVA) was adapted to experimental data and guide the best operational conditions mass by set at 6.0, 9 mg L⁻¹, 10 mg L⁻¹, 0.02 g, 4 and 4 min for pH, BCG concentration, EY concentration, adsorbent dosage, sonication and centrifuge time, respectively. At these specified conditions dye adsorption efficiency was higher than 99.5%. The suitability and well prediction of optimum point was tested by conducting five experiments and respective results revel that RSD% was lower than 3% and high quality of fitting was confirmed by t-test. The experimental data were best fitted in Langmuir isotherm equation and the removal followed pseudo second order kinetics. The experimentally obtained maximum adsorption capacities were estimated as 57.80 and 61.73 mg g⁻¹ of ZnO-NRs-AC for BCG and EY respectively from binary dye solutions. The mechanism of removal was explained by boundary layer diffusion via intraparticle diffusion.     

Synthesis and characterization of ZnS:Ni-NPs loaded on AC derived from apple tree wood and their applicability for the ultrasound assisted comparative adsorption of cationic dyes based on the experimental design

The applicability of ZnS:Ni nanoparticles loaded on activated carbon derived from apple tree wood (ZnS:Ni-NPs-ACATW) for the adsorption of Methylene Blue (MB) and Janus Green B (JGB) dyes in single system from water solution has been described. The synthesized adsorbent characterized and identified by UV–Vis, FE-SEM, EDX, TEM, FTIR and XRD. The influences of operation parameters including initial MB or JGB concentration (9.0–33.0 mg L⁻¹), pH (4.0–10.0), extent of adsorbent (0.08–0.12 g) and sonication time (4.0–8.0 min) investigated and subsequently best operational condition optimized by central composite design (CCD) combined with response surface methodology (RSM) and desirability function (DF) using STATISTICA 10.0 software. At optimum conditions, maximum MB and JSB adsorption onto ZnS:Ni-NPs-ACATW, i.e. 99.57% ± 1.34 and 98.70% ± 2.01, respectively was achieved pH of 7.0, 0.11 g adsorbent, 14 and 28 mg L⁻¹ of MB and JSB concentration respectively and 8 min sonication time. Experimental data were modelled by Langmuir, Freundlich, Temkin and Dubinin-Radushkevich (D-R) isotherms. Langmuir isotherm and monolayer adsorption capacity of MB and JSB was found to be 21.79 and 28.01 mg g⁻¹ respectively. The regression results strongly support more contribution of pseudo-second-order model for more accurate and repeatable representation of kinetic data. These results reveal that ZnS:Ni-NPs-ACATW could be useful as agents to efficiently remove dyes (JGB and MB) from contaminated water and can be very well recommended for wastewater remediation and control of environmental pollution.     

Periodate-assisted pulsed sonocatalysis of real textile wastewater in the presence of MgO nanoparticles: Response surface methodological optimization

The improvement of sonocatalytic treatment of real textile wastewater in the presence of MgO nanoparticles was the main goal of the present study. According to our preliminary results, the application of pulse mode of sonication, together with the addition of periodate ions, produced the greatest sonocatalytic activity and consequently, the highest chemical oxygen demand (COD) removal efficiency (73.95%) among all the assessed options. In the following, pulsed sonocatalysis of real textile wastewater in the presence of periodate ions was evaluated response surface methodologically on the basis of central composite design. Accordingly, a high correlation coefficient of 0.95 was attained for the applied statistical strategy to optimize the process. As results, a pulsed sonication time of 141 min, MgO dosage of 2.4 g/L, solution temperature of 314 K and periodate concentration of 0.11 M gave the maximum COD removal of about 85%. Under aforementioned operational conditions, the removal of total organic carbon (TOC) was obtained to be 63.34% with the reaction rate constant of 7.1 × 10⁻³ min⁻¹ based on the pseudo-first order kinetic model (R² = 0.99). Overall, periodate-assisted pulsed sonocatalysis over MgO nanoparticles can be applied as an efficient alternative process for treating and mineralizing real textile wastewater with good reusability potential.     

Spectrofluorimetric quantification of bilirubin using yttrium–norfloxacin complex as a fluorescence probe in serum samples

A simple and sensitive spectrofluorimetric method was developed to determine trace amounts of bilirubin (BR) using yttrium (Y³⁺)–norfloxacin (NFLX) complex as a fluorescence (FL) probe. NFLX can form a stable binary complex with Y³⁺ and markedly enhances the weak FL signal of the NFLX. The FL intensity of the Y³⁺–NFLX complex decreased significantly in the presence of BR in a buffer solution at pH=7.2. Under optimal conditions, the FL intensity decreased according to the BR concentration and showed a good linear relationship in the range of 0.03–2.3 μg mL^?1 of BR with a correlation coefficient of 0.9988. The limit of detection for the determination of BR was 2.8 ng mL^?1 with a relative standard deviation (RSD) of 1.55% for five replicate determination of 0.05 μg mL^-1 BR. The presented method offers higher sensitivity with simple instrumentation and was applied successfully in detecting BR at low concentrations.     

Optimization of the ultrasonic assisted removal of methylene blue by gold nanoparticles loaded on activated carbon using experimental design methodology

The present study was focused on the removal of methylene blue (MB) from aqueous solution by ultrasound-assisted adsorption onto the gold nanoparticles loaded on activated carbon (Au-NP-AC). This nanomaterial was characterized using different techniques such as SEM, XRD, and BET. The effects of variables such as pH, initial dye concentration, adsorbent dosage (g), temperature and sonication time (min) on MB removal were studied and using central composite design (CCD) and the optimum experimental conditions were found with desirability function (DF) combined response surface methodology (RSM). Fitting the experimental equilibrium data to various isotherm models such as Langmuir, Freundlich, Tempkin and Dubinin–Radushkevich models show the suitability and applicability of the Langmuir model. Analysis of experimental adsorption data to various kinetic models such as pseudo-first and second order, Elovich and intraparticle diffusion models show the applicability of the second-order equation model. The small amount of proposed adsorbent (0.01 g) is applicable for successful removal of MB (RE > 95%) in short time (1.6 min) with high adsorption capacity (104–185 mg g⁻¹).     

Optimization of simultaneous ultrasound assisted toxic dyes adsorption conditions from single and multi-components using central composite design: Application of derivative spectrophotometry and evaluation of the kinetics and isotherms

Present study is devoted on the efficient application of Sn (O, S)-NPs -AC for simultaneous sonicated accelerated adsorption of some dyes from single and multi-components systems. Sn (O, S) nanoparticles characterization by FESEM, EDX, EDX mapping and XRD revel its nano size structure with high purity of good crystallinity. Present adsorbent due to its nano spherical shape particles with approximate diameter of 40–60 nm seems to be highly effective in this regard. The effects of five variables viz. pH (3.5–9.5), 0.010–0.028 g of adsorbent and 0.5–6.5 min mixing by sonication is good and practical conditions for well and expected adsorption of MB and CV over concentration range of 3–15 mg L⁻¹. Combination of response surface methodology (RSM) based on central composite design (CCD) and subsequent of analysis of variance (ANOVA) and t-test statistics were used to test the significance of the independent variables and their interactions. Regression analysis reveal that experimental data with high repeatability and efficiency well represented by second-order polynomial model with coefficient of determination value of 0.9988 and 0.9976 for MB and CV, respectively following conditions like pH 8.0, 0.016 g adsorbent, 15 mg L⁻¹ of both dyes 4 min sonication time is proportional with achievement of experimental removal percentage of 99.80% of MB and 99.87% of CV in batch experiment. Evaluation and estimation of adsorption data with Langmuir and Freundlich isotherm well justify the results based on their correlation coefficient and error analysis confirm that Langmuir model is good model with adsorption capacity of 109.17 and 115.34 mg g⁻¹ in single system and 95.69 and 102.99 mg g⁻¹ in binary system for MB and CV, respectively. MB and CV kinetic and rate of adsorption well fitted by pseudo-second order equation both in single and binary systems and experimental results denote more and favorable adsorption of CV than respective value in single system. The pseudo-second-order rate constant k₂ in binary system larger than single system.     

Synthesis of nanocomposites of iron oxide/gold (Fe3O4/Au) loaded on activated carbon and their application in water treatment by using sonochemistry: Optimization study

This paper focuses on the finding best operational conditions using response surface methodology (RSM) for Rhodamine123 (R123) and Disulfine blue (DSB) dyes removal by ultrasound assisted adsorption onto Au-Fe₃O₄ nanoparticles loaded on activated carbon (Au-Fe₃O₄ NPs-AC). The influences of variables such as initial R123 (X₁) and DSB concentration (X₂), pH (X₃), adsorbent mass (X₄) and sonication time (X₅) on their removal were investigated by small central composite design (CCD) under response surface methodology. The significant variables and the possible interactions among variables were investigated and estimated accordingly. The best conditions were set as: 4 min, 4.0, 0.025 g, 13.5 and 26.5 mg L⁻¹ for sonication time, pH, adsorbent weight, initial R123 and DSB concentration, respectively. At above conditions, the adsorption equilibrium and kinetic follow the Langmuir isotherm and pseudo-second-order kinetic model, respectively. The maximum monolayer capacity (Q_max) of 71.46 and 76.38 mg g⁻¹ for R123 and DSB show sufficiency of model for well presentation of experimental data.     

Ultrasonically assisted removal of Congo Red,Phloxine B and Fast green FCF in ternary mixture using novel nanocomposite following their simultaneous analysis by derivative spectrophotometry

In this study dependency of simultaneous adsorption of Congo Red (CR), Phloxine B (BP) and Fast green FCF (FG) onto CuS/ZnS nanocomposites loaded on activated carbon (CuS/ZnS-NCs-AC) to pH, adsorbent mass, sonication time and initial dyes concentration were modeled and optimized, while CuS/ZnS-NCs-AC was identified by XRD, FESEM and EDS analysis. CR, PB and FG concentration determination were undertaken by first and second order derivative spectrophotometry in ternary mixture. According to central composite design (CCD) based on desirability function (DF), the best experimental conditions was set as pH 6.0, 0.02 g CuS/ZnS-NCs-AC, 5 min sonication time, 15 mg L⁻¹ for PB and 10 mg L⁻¹ for other dyes. Conduction of experiments to above conditions lead to highest dyes removal efficiency of 99.72, 98.8 and 98.17 for CR, PB and FG, respectively. The adsorption data efficiently fitted by Langmuir isotherm model, while the order of maximum adsorption capacity (Q_max) for PB (128.21 mg g⁻¹) > CR (88.57 mg g⁻¹) > FG (73.40 mg g⁻¹) is related to their different structure and charges. Kinetics of process was efficiently explained according to pseudo-second-order kinetic in cooperation of Weber and Morris based on intraparticle diffusion.     

Ultrasonic assisted-Fenton-like degradation of nitrobenzene at neutral pH using nanosized oxides of Fe and Cu

Ultrasonic-assisted heterogeneous Fenton reaction was used for degradation of nitrobenzene (NB) at neutral pH conditions. Nano-sized oxides of α-Fe₂O₃ and CuO were prepared, characterized and tested in degradation of NB (10 mg L⁻¹) under sonication of 20 kHz at 25 °C. Complete degradation of NB was effected at pH 7 in presence of 10 mM H₂O₂ after 10 min of sonication in presence of α-Fe₂O₃ (1.0 g L⁻¹), (k = 0.58 min⁻¹) and after 25 min in case of CuO (k = 0.126 min⁻¹). α-Fe₂O₃ showed also effective degradation under the conditions of 0.1 g L⁻¹ oxide and 5.0 mM of H₂O₂, even though with a lower rate constant (0.346 min⁻¹). Sonication plays a major role in enhancing the production of hydroxyl radicals in presence of solid oxides. Hydroxyl radicals-degradation pathway is suggested and adopted to explain the differences noted in rate constants recorded on using different oxides.