Preparation, characterization, and photocatalytic properties of silver carbonate

Silver carbonate (Ag₂CO₃) short rods were prepared using a precipitation method. It was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), diffuse reflective spectra (DRS) and photocatalytic degradation of organic pollutants and destruction of E. coli measurements. The results of DRS suggested that the optical transition of Ag₂CO₃ was indirectly allowed, and its band gap was determined to be 2.08 eV. The prepared Ag₂CO₃ displayed a high activity towards degradation of phenol and MB under visible light. The total organic carbon (TOC) value decreased during the photocatalytic process, which suggests that phenol was truly photodegraded. The stability of Ag₂CO₃ was greatly improved when Na₂CO₃ was added into the photocatalytic system. In addition, Ag₂CO₃ displayed enhanced photocatalytic activities for the destruction of E. coli due to its photogenerated electron-hole pairs.     

Sonophotocatalytic degradation of trypan blue and vesuvine dyes in the presence of blue light active photocatalyst of Ag3PO4/Bi2S3-HKUST-1-MOF: Central composite optimization and synergistic effect study

An efficient simultaneous sonophotocatalytic degradation of trypan blue (TB) and vesuvine (VS) using Ag₃PO₄/Bi₂S₃-HKUST-1-MOF as a novel visible light active photocatalyst was carried out successfully in a continuous flow-loop reactor equipped to blue LED light. Ag₃PO₄/Bi₂S₃-HKUST-1-MOF with activation ability under blue light illumination was synthesized and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray (EDX), photoluminescence (PL) and diffuse reflectance spectra (DRS). The effect of operational parameters such as the initial TB and VS concentration (5–45 mg/L), flow rate (30–110 mL/min), irradiation and sonication time (10–30 min), pH (3–11) and photocatalyst dosage (0.15–0.35 g/L) has been investigated and optimized using central composite design (CCD) combined with desirability function (DF). Maximum sonophotodegradation percentage (98.44% and 99.36% for TB and VS, respectively) was found at optimum condition set as: 25 mg/L of each dye, 70 mL/min of solution flow rate, 25 min of irradiation and sonication time, pH 6 and 0.25 g/L of photocatalyst dosage. At optimum conditions, synergistic index value was obtained 2.53 that indicated the hybrid systems including ultrasound irradiation and photocatalysis have higher efficiency compared with sum of the individual processes.     

Visible-light-induced degradation of formaldehyde over titania photocatalyst co-doped with nitrogen and nickel

Titanium isopropoxide, ammonium carbonate and nickelous nitrate were used as the sources of titanium, nitrogen, and nickel to prepare titania photocatalyst co-doped with nitrogen and nickel by means of the modified sol-gel method. The photocatalyst was characterized by X-ray diffraction (XRD), UV-vis diffusive reflectance spectroscopy (DRS), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM). The prepared N-Ni co-doped photocatalyst showed optical absorption in the visible light area and exhibited excellent photocatalytic ability for the degradation of formaldehyde under visible light irradiation. The effects of annealing temperature and component on the phase composition and photocatalytic activity were investigated. The results demonstrated that nitrogen atoms was weaved into the structure of titania and led to the response to visible light. However, nickel atoms existed in the form of Ni₂O₃, dispersed on the surface of TiO₂, suppressed the recombination of photo-induced electron-hole pairs, raised the photo quantum efficiency, and led to the enhancement of photocatalytic performance. The increase of photoactivity was attributed to the synergistic effects of co-doping.     

Synthesis and characterization of the efficient visible-light-induced photocatalyst AgBr and its photodegradation activity

AgBr photocatalysts were prepared with the 1-hexadecyl-3-methylimidazolium bromide ([C₁₆mim]Br) reactable ionic liquid at different temperatures by one-step hydrothermal method, in which the ionic liquid acted as a precursor and a template to control the size of AgBr crystal. The photocatalysts were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), the Brunauer–Emmett–Teller (BET) surface area and diffuse reflectance spectroscopy (DRS). Methyl orange (MO) dye was chosen as a model pollutant to investigate the photocatalytic activity and the stability of the samples under visible light irradiation. The results indicated that the AgBr photocatalysts showed high efficiency in the degradation of MO under visible light irradiation. The kinetic property of the reaction followed the first-order reaction model. During the photocatalytic degradation reaction, AgBr was transformed to the Ag⁰/AgBr composite. However, the photocatalytic efficiency was still high and the photocatalytic activity was stable. The possible photocatalytic mechanism of the photocatalysts was also eventually proposed.     

Efficient photocatalytic degradation of acid orange 7 on metal oxide p–n junction composites under visible light

MO(=CuO, Co₃O₄, NiO)/BiVO₄ p–n junction composites were synthesized by urea-precipitation and wet impregnation method. The physicochemical and optical properties of the as-prepared materials were investigated by X-ray diffraction (XRD), X-ray photoelectron spectra (XPS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and UV–visible diffuse reflectance spectra. The photocatalytic performance of the as-prepared materials was investigated for decomposition of azo dye, acid orange 7. The CuO/BiVO₄ and Co₃O₄/BiVO₄ p–n junction composite photocatalysts exhibited the higher photocatalytic degradation of acid orange 7 than those of BiVO₄ and NiO/BiVO₄ as-prepared samples under visible light irradiation. We also discussed the mechanism of enhanced photocatalytic activity of p–n junctioned composites based on their energy band structures.     

Flowerlike PtCl4/Bi2WO6 composite photocatalyst with enhanced visible-light-induced photocatalytic activity

Flowerlike PtCl₄/Bi₂WO₆ composite photocatalyst was successfully synthesized through a simple two-step method involving a template-free hydrothermal process and the following impregnation treatment. The samples were fully characterized by the study of X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), X-ray photoelectron spectroscopy (XPS), and UV-Vis absorption spectra. The results indicated that the doping of Pt species did not affect the crystal structure and the morphology of Bi₂WO₆ photocatalyst, but it had great influences on the photocatalytic activity of Bi₂WO₆ towards rhodamine-B (RhB) degradation. Besides, the Pt species was found to be present as PtCl₄ in the composite samples, and also an optimal Pt species content on the surface of Bi₂WO₆ photocatalyst was discovered with the highest photocatalytic ability. The improved photocatalytic performance could be ascribed to the enhanced interfacial charge transfer and the inhibited recombination of electron-hole pairs. Meanwhile, a possible mechanism for RhB photocatalytic degradation over PtCl₄/Bi₂WO₆ catalyst was also proposed.     

Synthesis,characterization and excellent photocatalytic activity of Ag/AgBr/MoO3 composite photocatalyst

A novel composite photocatalyst Ag/AgBr/MoO₃ was successfully synthesized via a simple precipitation method at room temperature. The obtained products were characterized by X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy, high-resolution transmission electron microscopy and UV–vis diffuse reflectance spectroscopy in detail. The photocatalytic activity of the samples was evaluated by monitoring the degradation of rhodamine B (RhB) solution under visible-light irradiation. The results showed that the photocatalytic activity of Ag/AgBr/MoO₃ composite significantly enhanced and the degradation ratio of RhB reached 97.7 % after 15 min only. The excellent photocatalytic activity might be closely related to the large surface area, porosity structure and efficient separation of photoinduced electron–hole pairs. The possible reaction mechanism was also discussed.     

Ag2S nanoparticle encapsulated in mesoporous material nanoparticles and its application for photocatalytic degradation of dye in aqueous solution

Semiconductor loaded mesoporous materials in general possess greater photocatalytic activity than pure semiconductors. Hence, with an attempt to achieve higher photocatalytic activity, Ag₂S/MCM-41 photocatalysts were prepared by ion exchange method and used for the photocatalytic degradation of methylene blue. The materials were characterized by different analytical techniques such as transmission electron microscopy (TEM), X-ray diffraction (XRD), infrared spectroscopy (IR) and BET (Brunauer-Emmert-Teller) experiments. The effect of Ag₂S, MCM-41 support and different wt% of Ag₂S over the support on the photocatalytic degradation and influence of parameters such as Ag₂S loading, catalyst a mount, pH and initial concentration of dye on degradation are evaluated. The degradation reaction follows pseudo-first order kinetics. It was seen that 0.6 g/L of photocatalyst is an optimum value for the dosage of photocatalyst. The degradation efficiency was decreased in dye concentration above 3.2 ppm for dye.     

Synergistic effect of efficient adsorption g-C3N4/ZnO composite for photocatalytic property

Novel g-C₃N₄/ZnO composite photocatalyst was synthesized from an oxygen-containing precursor by direct thermal decomposition urea in air without any other templates assistance. Different percentages of g-C₃N₄ were hybridized with ZnO via the monolayer-dispersed method. The prepared g-C₃N₄/ZnO composites were characterized by XRD, SEM, UV–vis diffuse reflectance spectra (DRS), FT-IR, TEM and XPS. The composites showed much higher efficiency for degradation of Rhodamine B (RhB) than ZnO under UV and visible light irradiation. Especially, the photocatalytic efficiency was the highest under UV light irradiation when the percentage of g-C₃N₄ was 6%. The improved photocatalytic activity may be due to synergistic effect of photon acquisition and direct contact between organic dyestuff and photocatalyst. Then, effective separation of photogenerated electron–hole pairs at the interface of g-C₃N₄ is an important factor for improvement of photocatalytic activity. This work indicates that g-C₃N₄ hybrid semiconductors photocatalyst is a promising material in pollutants degradation.     

Assembly,characterization, and photocatalytic activities of TiO<Subscript>2</Subscript> nanotubes/CdS quantum dots nanocomposites

The semiconductor quantum dots (QDs) can be very efficient to tune the response of photocatalyst of TiO₂ to visible light. In this study, CdS QDs formed in situ with about 8 nm have been successfully deposited onto the surfaces of TiO₂ nanotubes (TNTs) to form TNTs/CdS QDs nanocomposites by use of a simple bifunctional organic linker, thiolactic acid. The diffuse reflectance spectroscopy (DRS) spectra of as prepared samples showed that the absorption edge of the TNTs/CdS composite is extended to visible range, with absorption edge at 530 nm. The photocatalytic activity and stability of TNTs/CdS were also evaluated for the photodegradation of rhodamine B. The results showed that when TNTs/CdS QDs was used, photocatalytic degradation of RhB under visible light irradiation reached 91.6%, higher than 45.4 and 30.5% for P25 and TNTs, respectively. This study indicated that the TNTs/CdS QDs nanocomposites were superior catalysts for photodegradation under visible light irradiation compared with TNTs and P25 samples, which may find wide application as a powerful photocatalyst in environmental field.     

Visible-Light Activities of Erbium Doped BiVO4 Photocatalysts

采用水热合成法,制备出Er掺杂的BiVO₄复合光催化剂,并采用XRD、SEM、XPS和紫外-可见漫反射光谱技术对其进行分析表征．通过可见光下降解水溶液中甲基橙分子来考察其光催化性能,结果显示掺杂组份以氧化物Er₂O₃形式存在于的复合光催化剂中;且掺杂复合光催化剂的可见光吸收和催化活性都比纯BiVO₄有所增强．     

Visible-light-driven titania photocatalyst co-doped with nitrogen and ferrum

Nitrogen and ferrum co-doped titania photocatalyst was prepared by the sol-gel route. The prepared photocatalyst was characterized by various techniques including X-ray diffraction (XRD), UV-vis diffusive reflectance spectroscopy (DRS), X-ray photoelectron spectroscopy (XPS), and N₂ adsorption-desorption isotherm. The photocatalytic activity of the co-doped titania photocatalyst was evaluated by the degradation of methyl orange (MO) from aqueous solution under visible light irradiation and was compared with that of the commercial TiO₂ photocatalyst (Degussa P25). The results revealed that the nitrogen doping could lead to the response to visible light and that the ferrum doping could improve the photocatalytic performance. The effects of the component and the annealing temperature of the co-doped titania photocatalyst on the photocatalytic activity were investigated.     

Ultrasound assisted synthesis of doped TiO2 nano-particles: Characterization and comparison of effectiveness for photocatalytic oxidation of dyestuff effluent

The present work deals with the synthesis of titanium dioxide nanoparticles doped with Fe and Ce using sonochemical approach and its comparison with the conventional doping method. The prepared samples have been characterized using X-ray diffraction (XRD), FTIR, transmission electron microscopy (TEM) and UV–visible spectra (UV–vis). The effectiveness of the synthesized catalyst for the photocatalytic degradation of crystal violet dye has also been investigated considering crystal violet degradation as the model reaction. It has been observed that the catalysts prepared by sonochemical method exhibit higher photocatalytic activity as compared to the catalysts prepared by the conventional methods. Also the Ce-doped TiO₂ exhibits maximum photocatalytic activity followed by Fe-doped TiO₂ and the least activity was observed for only TiO₂. The presence of Fe and Ce in the TiO₂ structure results in a significant absorption shift towards the visible region. Detailed investigations on the degradation indicated that an optimal dosage with 0.8 mol% doping of Ce and 1.2 mol% doping of Fe in TiO₂ results in higher extents of degradation. Kinetic studies also established that the photocatalytic degradation followed the pseudo first-order reaction kinetics. Overall it has been established that ultrasound assisted synthesis of doped photocatalyst significantly enhances the photocatalytic activity.     

Preparation and visible light photocatalytic activity of mesoporous N, S-codoped TiO2(B) nanobelts

The mesoporous N, S-codoped TiO₂(B) nanobelts are synthesized via hydrothermal synthesis and post-treatment, and characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), N₂ adsorption-desorption measurements (BET), X-ray photoelectron spectra (XPS), and UV-vis diffuse reflectance spectra (DRS). The results show that the prepared samples are mesoporous structured and exhibit stronger absorption in the visible light region with red shift in the absorption edge. The photocatalytic activity of N, S-codoped mesoporous TiO₂(B) nanobelts is evaluated by the photocatalytic photodegradation of potassium ethyl xanthate (KEX) under visible light irradiation. It is found that the photocatalytic activity of the prepared samples increases with increasing the molar ratio of thiourea to Ti (R). At R = 3, the photocatalytic activity of the N, S-codoped TiO₂(B) sample TBLTS-3 reaches a maximum value. With further increasing R, the photocatalytic activity of the sample decreases. The high photocatalytic activity of N, S-codoped TiO₂(B) nanobelts can be attributed to the balance between strong absorption in visible light region and low recombination rate of electron/hole pairs.     

Graphene oxide based Pt-TiO2 photocatalyst: ultrasound assisted synthesis, characterization and catalytic efficiency

An ultrasound-assisted method was used for synthesizing nanosized Pt-graphene oxide (GO)-TiO₂ photocatalyst. The Pt-GO-TiO₂ nanoparticles were characterized by diffused reflectance spectroscopy, X-ray diffraction, N₂ BET adsorption-desorption measurements, atomic force microscopy and transmission electron microscopy. The photocatalytic and sonophotocatalytic degradation of a commonly used anionic surfactant, dodecylbenzenesulfonate (DBS), in aqueous solution was carried out using Pt-GO-TiO₂ nanoparticles in order to evaluate the photocatalytic efficiency. For comparison purpose, sonolytic degradation of DBS was carried out. The Pt-GO-TiO₂ catalyst degraded DBS at a higher rate than P-25 (TiO₂), prepared TiO₂ or GO-TiO₂ photocatalysts. The mineralization of DBS was enhanced by a factor of 3 using Pt-GO-TiO₂ compared to the P-25 (TiO₂). In the presence of GO, an enhanced rate of DBS oxidation was observed and, when doped with platinum, mineralization of DBS was further enhanced. The Pt-GO-TiO₂ catalyst also showed a considerable amount of degradation of DBS under visible light irradiation. The initial solution pH had an effect on the rate of photocatalytic oxidation of DBS, whereas no such effect of initial pH was observed in the sonochemical or sonophotocatalytic oxidation of DBS. The intermediate products formed during the degradation of DBS were monitored using electrospray mass spectrometry. The ability of GO to serve as a solid support to anchor platinum particles on GO-TiO₂ is useful in developing new photocatalysts.     

Compare the photocatalytic properties of nanocomposites with tandem n (AgBr)-n (Ag2CO3) and p (AgCl)-n (Ag2CO3) heterojunctions

In this work, Ag₂CO₃ nanoparticles (NPs) (as a n-type semiconductor) incorporated in mordenite zeolite (MOR) by a facile precipitation method. Silver halides, AgCl (as a p-type semiconductor) and AgBr (as a n-type semiconductor), with different weight percentage (20%, 40% and 50%) were coupled into Ag₂CO₃-MOR nanocomposite (NC) and producing a series of novel AgCl/Ag₂CO₃ (p-n heterojunction)-MOR and AgBr/Ag₂CO₃ (n-n heterojunction)-MOR NCs. The effects of silver halides on the Ag₂CO₃–MOR catalyst for the photocatalytic degradation of methyl blue (MB) under visible light irradiation have been investigated. The structure, composition and optical properties of NCs were investigated by UV–Visible diffuse reflectance spectroscopy (UV–Vis DRS), X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM). The prepared AgX/Ag₂CO₃-MOR NCs with the optimal content of AgX (50 wt%) indicated higher photocatalytic activity than that of the Ag₂CO₃-MOR and Ag₂CO₃. The cycle experiments on the heterojuctions NCs indicated that photocatalytic stability of AgBr/Ag₂CO₃-MOR NC was more than AgCl/Ag₂CO₃-MOR NC in all cycles. On the basis of the experimental results, a possible mechanism for the enhanced photocatalytic activity and photoinduced stability of silver compounds was proposed.     

Preparation, characterization and photocatalytic activity of multi-walled carbon nanotube-supported tungsten trioxide composites

Multi-walled carbon nanotube (MWCNT)-supported tungsten trioxide (WO₃) composite catalysts were prepared by liquid-phase process. WO₃ nanoparticles grew on the inner and outer surface of MWCNTs. Their photocatalytic activities in the degradation of the Rhodamine B Dye were studied. The effects of mass ratio of MWCNTs to WO₃ were discussed. X-ray diffraction, field emission transmission electron microscopy, thermogravimetric-differential thermal analysis and ultraviolet-visible light absorption spectra were carried out to characterize the composite catalysts. The results indicated that the optimum mass ratio of MWCNTs to WO₃ is 5:100.     

Photocatalytic degradation of phenol over novel rod shaped Graphene@BiPO4 nanocomposite

Graphene@BiPO₄ nanocomposite with unique rod shape morphology of BiPO₄ has been successfully fabricated by the simple microwave assisted hydrothermal method. The crucial role of graphene oxide in the growth of rod shaped BiPO₄ crystals has been attempted to explain in this article. Graphene oxide acts as a structure-directing and morphology-controlling agent in the nucleation and growth of nanocrystals. The as prepared organic–inorganic hybrid Graphene@BiPO₄ nanocomposite photocatalyst was characterized by various techniques i.e. X-ray diffraction, scanning electron microscopy, UV–vis diffuse reflectance spectroscopy, Raman spectroscopy and photoluminescence (PL) spectroscopy. The results were promising and shown enhanced photocatalytic activity than pure BiPO₄ for phenol degradation. The effect of graphene loading on the rates of photocatalytic degradation of phenol in solution is investigated. The result shows that the optimum photocatalytic activity of Graphene@BiPO₄ composite at 5 wt% of graphene under visible light is almost three times higher than pure BiPO₄.     

Ultrasound-assisted synthesis of ZnO photocatalysts for gas phase pollutant remediation: Role of the synthetic parameters and of promotion with WO3

The synthesis of ZnO photocatalysts by ultrasound-assisted technique was here investigated. Several experimental parameters including the zinc precursor (acetate, chloride, nitrate), sonication conditions (amplitude, pulse) and post-synthetic thermal treatment (up to 500 °C) were studied. Crystalline ZnO samples were obtained without thermal treatments due to the adopted reactant ratios and synthesis temperature. Sonication plays a major role on the morphological oxide features in terms of particle size and surface area, the latter showing a 20-fold increase with respect to conventional synthesis. Interestingly, 1 and 3 s sonication pulses led to morphological properties similar to continuous sonication. A thermal treatment at moderate temperatures (400–450 °C) promoted the loss of surface hydroxylation and the formation of lattice defects, while higher temperatures were detrimental for the sample morphology. The prepared ZnO was decorated with WO₃ particles comparing an ultrasound-assisted technique using 1 s pulses with a conventional approach, giving rise to composites with promoted visible light absorption. Samples were tested towards the photocatalytic degradation of nitrogen oxides (500–1000 ppb) in humidified air under both UV and visible light. By carefully controlling the synthetic procedure, better performance were observed with respect to the commercial benchmark. Samples from ultrasound-assisted syntheses, also in the case of pulsed sonication, showed consistently better results than conventional references, in particular for ZnO-WO₃ composites. The composite by ultrasound-assisted synthesis showed > 95% degradation in 180 min and doubled NO_x degradation under visible light with respect to the conventional composite.     

Efficient visible-light-induced photocatalytic degradation of MO on the Cr-nanocrystalline titania-S

In order to improve visible light photocatalytic activities of the nanometer TiO₂, a novel and efficient Cr,S-codoped TiO₂ (Cr-TiO₂-S) photocatalyst was prepared by precipitation-doping method. The crystalline structure, morphology, particle size, and chemical structure of Cr-TiO₂-S were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), and Fourier transform infrared (FT-IR) techniques, respectively. Results indicate that the doping of Cr and S, cause absorption edge shifts to the visible light region (λ > 420 nm) compare to the pure TiO₂, reduces average size of the TiO₂ crystallites, enhances desired lattice distortion of Ti, promotes separation of photo-induced electron and hole pair, and thus improves pollutant decomposition under visible light irradiation. The photocatalytic activities of Cr-TiO₂-S nanoparticles were evaluated using the photodegradation of methyl orange (MO) as probe reaction under the irradiation of UV and visible light and it was observed that the Cr-TiO₂-S photocatalyst shows higher visible photocatalytic activity than the pure TiO₂. The optimal Cr-TiO₂-S concentration to obtain the highest photocatalytic activity was 5 mol% for both of Cr and S.