Synthesis and optical studies of novel Eu2+ and Ce3+ doped BaMg8Al18Si18O72 phosphors

Novel Eu²⁺ and Ce³⁺ activated BaMg₈Al₁₈Si₁₈O₇₂ phosphors was prepared by combustion method and their PL characteristics were investigated. The result shows that all samples can be excited efficiently by near UV excitation under 334 nm and 316 nm. The emission was observed for BaMg₈Al₁₈Si₁₈O₇₂:Eu²⁺ phosphor at 437 nm corresponding to d → f transition, under 334 nm broad-band excitation, whereas BaMg₈Al₁₈Si₁₈O₇₂:Ce³⁺ phosphor shows emission band at 376 nm under 316 nm excitation. Phase purity of the phosphor was checked with the help of XRD pattern. SEM analysis shows the external morphology of the combustion synthesized phosphor.     

Synthesis and luminescent properties of Eu2+ doped nitrogen-rich Ca-α-SiAlON phosphor for white light-emitting diodes

Yellow/orange-emitting nitrogen-rich Ca_0.9Si₉Al₃(O,N)₁₆: Eu²⁺ phosphors were successfully prepared by solid-state reaction synthesis. The fluorescence excitation spectra of all of the nitrogen-rich Ca_0.9Si₉Al₃(O,N)₁₆: Eu²⁺ phosphor powders displayed two broad bands centered at about 300 nm and 400–475 nm. The first peak was assigned to the absorption of the host lattice and the second to the 4f⁷ → 4f⁶5d¹ absorption of the Eu²⁺ ions, its means enhanced 4f⁷ → 4f⁶5d excitation of Eu²⁺ ion. The absorption peak intensity increased upon increasing the Eu²⁺ doping amount, but only up to a Eu²⁺ concentration ratio of 0.15. The emission spectra of the prepared Ca_0.9Si₉Al₃(O,N)₁₆: Eu²⁺ phosphors all exhibited a single broad band in the 500–700 nm region, maximum emission peak observed at 591 nm. The room temperature decay times were observed τ₁ = 1.27 μs and τ₂ = 9.90 μs.     

Enhancement of the photoluminescence and long afterglow properties of Ca<Subscript>2</Subscript>MgSi<Subscript>2</Subscript>O<Subscript>7</Subscript>:Eu<Superscript>2+</Superscript> phosphor by Dy<Superscript>3+</Superscript> co-doping

The Ca₂MgSi₂O₇:Eu²⁺ and Ca₂MgSi₂O₇:Eu²⁺, Dy³⁺ long afterglow phosphors were synthesized under a weak reducing atmosphere by the traditional high temperature solid state reaction method. The synthesized phosphors were characterized by powder X-ray diffraction (XRD) and energy dispersive X-ray spectroscopy (EDX) techniques. The luminescence properties were investigated using thermoluminescence (TL), photoluminescence (PL), long afterglow, mechanoluminescence (ML), and ML spectra techniques. The crystal structure of sintered phosphors was an akermanite type structure, which belongs to the tetragonal crystallography. TL properties of these phosphors were investigated, and the results were also compared. Under the ultraviolet excitation, the emission spectra of both prepared phosphors were composed of a broad band peaking at 535 nm, belonging to the broad emission band. When the Ca₂MgSi₂O₇:Eu²⁺ phosphor is co-doped with Dy³⁺, the PL, afterglow and ML intensity is strongly enhanced. The decay graph indicates that both the sintered phosphors contain fast decay and slow decay process. The ML intensities of Ca₂MgSi₂O₇:Eu²⁺ and Ca₂MgSi₂O₇:Eu²⁺, Dy³⁺ phosphors were proportionally increased with the increase of impact velocity, which suggests that this phosphor can be used as sensors to detect the stress of an object.     

SrSi2O2N2∶Eu2+荧光粉的制备及性能研究

以SrCO3,Si3N4,Eu2O3为原料,在N2气氛下,采用自还原高温固相法制备了SrSi2O2N2:Eu2+荧光粉。研究了该荧光粉的物相结构、发光性能和晶体形貌,同时对比在不同气氛下合成的荧光粉。结果表明,在N2气氛与N2/H2气氛下分别合成的SrSi2O2N2:Eu2+荧光粉物相结构和光谱特性基本一致。显示出合成了主晶相SrSi2O2N2,但还含有少量未知的中间项。Eu2+浓度的变化不影响激发状态,而发射光谱的波长在Eu2+浓度为1mol%-20mol%之间,从530 nm的绿光红移至550 nm的黄绿光区域。同时,激发光谱覆盖的范围宽,均能有效的被UV或蓝光激发,这意味着该类荧光粉在白光LED方面有可能得到广泛的应用。     

Photoluminescence Properties of a Promising Red-emitting Phosphor CaNb2O6:EU3+for Trichromatic White Light Emitting Diodes Application

Motivated by the need for new phosphors of white light emitting diode (WLED) application, Ca_0.95Nb₂ O₆:Eu³⁺_0.05 phosphors were synthesized by high temperature solid‐state reaction. Increasing the content of doped‐Eu³⁺ and adding the co‐activator Bi³⁺ to improve the photoluminescence (PL) intensity of Ca_1?xNb₂ O₆Eu³⁺_x phosphors were investigated in detail. The effects of Eu³⁺ were better than that of Bi³⁺ on the PL intensity of Ca_1?xNb₂ O₆Eu³⁺_x phosphors. Compared with Y₂O₂ S:0.05Eu³⁺ the Ca_0.70Nb₂ O₆:Eu³⁺_0.03 phosphor could be excited efficiently by UV (395 nm) light and emit the red light at 614 nm with line spectra, which were coupled well with the characteristic emission from UV‐Near UV LED. The CIE (International Commission on Illumination) chromaticity coordinates (x?0.654, y?0.348) of Ca_0.70Nb₂O₆:Eu³⁺_0.03 were close to the NTSC (National Television Standard Committee) standard values. Therefore Ca_0.70Nb₂ O₆:Eu³⁺_0.03 might find application to UV‐Near UV InGaN chip‐based white light emitting diodes, which is further proved by the LED fabrication with the Ca_0.70Nb₂ O₆:Eu³⁺_0.03 phosphor.     

Ultra‐Narrow‐Band Blue‐Emitting Oxoberyllates AELi2[Be4O6]:Eu2+ (AE=Sr,Ba) Paving the Way to Efficient RGB pc‐LEDs

Highly efficient phosphor‐converted light‐emitting diodes (pc‐LEDs) are popular in lighting and high‐tech electronics applications. The main goals of present LED research are increasing light quality, preserving color point stability and reducing energy consumption. For those purposes excellent phosphors in all spectral regions are required. Here, we report on ultra‐narrow band blue emitting oxoberyllates AELi₂[Be₄O₆]:Eu²⁺ (AE=Sr,Ba) exhibiting a rigid covalent network isotypic to the nitridoalumosilicate BaLi₂[(Al₂Si₂)N₆]:Eu²⁺. The oxoberyllates’ extremely small Stokes shift and unprecedented ultra‐narrow band blue emission with fwhm ≈25 nm (≈1200 cm^?1) at λ_em=454–456 nm result from its rigid, highly condensed tetrahedra network. AELi₂[Be₄O₆]:Eu²⁺ allows for using short‐wavelength blue LEDs (λ_em<440 nm) for efficient excitation of the ultra‐narrow band blue phosphor, for application in violet pumped white RGB phosphor LEDs with improved color point stability, excellent color rendering, and high energy efficiency.     

Synthesis of Ca<Subscript>3</Subscript>Al<Subscript>6</Subscript>Si<Subscript>2</Subscript>O<Subscript>16</Subscript>: Ce<Superscript>3+</Superscript>, Tb<Superscript>3+</Superscript> phosphors by sol–gel method and optical properties

Ca₃Al₆Si₂O₁₆: Ce³⁺, Tb³⁺ phosphors have been prepared by sol–gel method. The structure and photoluminescence properties were studied with careful. The results indicated that the single-phased Ca₃Al₆Si₂O₁₆ phosphors crystallize at 1,000 °C for 2 h in conventional furnace. With appropriate concentrations of Ce³⁺ and Tb³⁺ ions into Ca₃Al₆Si₂O₁₆ matrix, these materials exhibit blue phosphors and white light under ultraviolet radiation. White-light emission can be achieved because of a 400 nm emission ascribed to transitions of Ce³⁺ ions and three sharp peaks at 487, 543, 585 nm, respectively, resulting from transitions of Tb³⁺ ions.     

The effect of replacement of Sr by Ca on the structural and luminescence properties of the red-emitting Sr2Si5N8:Eu LED conversion phosphor

The influence of the replacement of Sr by Ca on structural and luminescence properties of Eu²⁺-doped Sr₂Si₅N₈ is reported. The Rietveld refinement of the powder X-ray diffraction data shows that the Ca²⁺ ion preferentially occupies the larger Sr site in Sr₂Si₅N₈:Eu²⁺. Although the excitation spectrum is hardly modified, the position of the emission band of Eu²⁺ can be tailored through partial replacement of Sr by Ca in Sr₂Si₅N₈:Eu²⁺, resulting in red-emission shifting from 620 to 643 nm. Furthermore, (Sr, Ca)₂Si₅N₈:Eu²⁺ shows high potential as a conversion phosphor for white-light LED applications due to similar absorption, conversion efficiency and thermal quenching behaviour for 465 nm excitation after the introduction of the Ca ion.     

Dual-Shelled RbLi(Li3SiO4)2:Eu2+@Al2O3@ODTMS Phosphor as a Stable Green Emitter for High-Power LED Backlights

The stability of luminescent materials is a key factor for the practical application in white light-emitting diodes (LEDs). Poor chemical stability of narrow-band green-emitting RbLi(Li₃SiO₄)₂:Eu²⁺ (RLSO:Eu²⁺) phosphor hinders their further commercialization even if they have excellent stability against thermal quenching. Herein, we propose an efficient protection scheme by combining the surface coating of amorphous Al₂O₃ and hydrophobic modification by octadecyltrimethoxysilane (ODTMS) to construct the moisture-resistant dual-shelled RLSO:Eu²⁺@Al₂O₃@ODTMS composite. The growth mechanisms of both the Al₂O₃ inorganic layer and the silane organic layer on the phosphor surface are investigated. The results remarkably improve the water-stability of this narrow-band green emitter. The evaluation of the white LED by employing this composite as the green component demonstrates that RLSO:Eu²⁺@Al₂O₃@ODTMS is a promising candidate for the high-performance display backlights, and this dual-shelled strategy provides an alternative method to improve the moisture-resistant property of humidity-sensitive phosphors.     

Luminescent properties of Sr<Subscript>3</Subscript>Al<Subscript>2</Subscript>O<Subscript>6</Subscript>: Eu,Pr prepared by sol–gel method

A new red-emitting long afterglow Sr₃Al₂O₆: Eu²⁺, Pr³⁺ phosphor was synthesized by sol–gel methods using Sr(NO₃)₂, Al(NO₃)₃·9H₂O, Eu(NO₃)₃ and Pr(NO₃)₃ as raw materials. The crystalline structure of the phosphor powders were characterized by X-ray diffraction. Luminescent properties of the phosphor powders were analyzed by the fluorescence spectrophotometer. Sr₃Al₂O₆: Eu²⁺, Pr³⁺ phosphor powders with single Sr₃Al₂O₆ phase were prepared at 1200 °C for 2 h in the reducing atmosphere. Pr³⁺ doped made the light intensity and the light-lasting time of Sr₃Al₂O₆: Eu²⁺, Pr³⁺ phosphors improved. The emission peaks of the Sr₃Al₂O₆: Eu²⁺, Pr³⁺ phosphor powders lay at 612 nm with the excitation of 472 nm and the longest afterglow time could last for about 15 min at Pr³⁺ content of 0.06.     

Eu3+掺杂双钙钛矿Sr2CaMoO6橙红色荧光粉的结构特征及其发光性能

采用EDTA-柠檬酸联合配位法制备一系列组成的(Sr1-xEux)2CaMoO6橙红色荧光粉。通过X射线衍射、拉曼光谱、扫描电镜及荧光光谱研究不同Eu3+离子掺杂浓度下Sr2CaMoO6∶Eu3+荧光粉的晶体结构、掺杂位置、形貌及其光致发光性能。Rietveld全谱拟合结果表明:掺杂后样品为(Ca/Mo)O6八面体少量倾斜的空间群为P21/n的正交双钙钛矿结构,随着Eu3+离子共掺杂浓度的增加,样品的晶胞体积减小;Eu3+离子取代八面体间隙的Sr2+位置致使双钙钛矿的T2g(1)拉曼振动模发生蓝移;在近紫外区宽而强电荷迁移带和蓝光激发下,该荧光粉分别发射以Eu3+离子5D0-7F1磁偶极跃迁为主的橙光和以5D0-7F2电偶极跃迁为主的红光,组成为(Sr0.98Eu0.02)2CaMoO6的荧光粉具有最强的橙红光发射强度,是一种潜在的适用于近紫外LED芯片的光转换红光材料。     

High sensitivity and multicolor tunable optical thermometry in Bi3+/Eu3+ co-doped Ca2Sb2O7 phosphors

Currently, with increasing demand for non-contact fluorescence intensity ratio-based optical thermometry, a novel phosphor with high-efficiency, dual-emitting centers, and differentiable temperature sensitivity is more and more urgent to develop. In this work, an efficient dual-emitting center optical thermometry with high sensitivity and multicolor tunable in Ca₂Sb₂O₇:Bi³⁺, Eu³⁺ phosphor is firstly designed and successfully prepared. Under 330 nm excitation, the fabricated phosphor presents the featured and distinguishable emissions of Bi³⁺ and Eu³⁺ ions. The high efficiency energy transfer from Bi³⁺ to Eu³⁺ ions is proved and its corresponding mechanism belongs to dipole-dipole interaction. By modulating the ratio of Bi³⁺/Eu³⁺, the multicolor changes from blue to pink are realized. Based on the discriminative thermal quenching behavior between Bi³⁺ and Eu³⁺, the fluorescence intensity ratio of Eu³⁺ to Bi³⁺ in Ca₂Sb₂O₇ samples illustrates excellent optical thermometry performance from 298 to 523 K. The maximum absolute sensitivity (S_a) and relative sensitivity (S_r) reach as high as 0.2773 K^?1 at 523 K and 2.37% K^?1 at 448 K, respectively. Notably, the discriminated surrounding temperature can be directly confirmed by observing the emitting color from purple to orange-red with the temperature increase from 298 to 523 K. Furthermore, the as-prepared phosphor materials also demonstrate outstanding repeatability and excellent reversibility. These results exhibit that the designed Ca₂Sb₂O₇:Bi³⁺, Eu³⁺ phosphors have great promising applications in the field of non-contact optical temperature thermometry and thermochromic.     

Single-phased white-light emitting CaAl<Subscript>2</Subscript>Si<Subscript>2</Subscript>O<Subscript>8</Subscript>: Eu<Superscript>2+</Superscript>, Mn<Superscript>2+</Superscript> phosphors prepared by a sol–gel method

CaAl₂Si₂O₈: Eu²⁺, Mn²⁺ phosphors have been prepared by a sol–gel method. X-ray diffractometer, spectrofluorometer and UV–Vis spectrometer were used to characterize structural and optical properties of the samples. The results indicate that anorthite (CaAl₂Si₂O₈) directly crystallizes at 1000 °C in the sol–gel process. CaAl₂Si₂O₈: Eu²⁺, Mn²⁺ phosphors show two emission bands excited by ultraviolet light. Blue (around 415 nm) and yellow (around 575 nm) emissions originate from Eu²⁺ and Mn²⁺, respectively. With appropriate tuning of Mn²⁺ content, CaAl₂Si₂O₈: Eu²⁺, Mn²⁺ phosphors exhibit different hues and relative color temperatures.     

Dual‐Shelled RbLi(Li3SiO4)2:Eu2+@Al2O3@ODTMS Phosphor as a Stable Green Emitter for High‐Power LED Backlights

The stability of luminescent materials is a key factor for the practical application in white light‐emitting diodes (LEDs). Poor chemical stability of narrow‐band green‐emitting RbLi(Li₃SiO₄)₂:Eu²⁺ (RLSO:Eu²⁺) phosphor hinders their further commercialization even if they have excellent stability against thermal quenching. Herein, we propose an efficient protection scheme by combining the surface coating of amorphous Al₂O₃ and hydrophobic modification by octadecyltrimethoxysilane (ODTMS) to construct the moisture‐resistant dual‐shelled RLSO:Eu²⁺@Al₂O₃@ODTMS composite. The growth mechanisms of both the Al₂O₃ inorganic layer and the silane organic layer on the phosphor surface are investigated. The results remarkably improve the water‐stability of this narrow‐band green emitter. The evaluation of the white LED by employing this composite as the green component demonstrates that RLSO:Eu²⁺@Al₂O₃@ODTMS is a promising candidate for the high‐performance display backlights, and this dual‐shelled strategy provides an alternative method to improve the moisture‐resistant property of humidity‐sensitive phosphors.     

Obtain full visible spectrum light-emitting diode illumination via bismuth-activated cyan phosphors

Developing highly efficient cyan-emitting fluorescent materials is essential to bridge the cyan gap in phosphor-converted white light-emitting diodes for full-spectrum white illumination. Here, a Bi-doped cyan phosphor has been reported to solve this gap. The phase purity, photoluminescence emission/excitation spectra, concentration quenching, lifetime decay curves, and temperature-dependent photoluminescence emission spectra were systematically investigated. SrLaGaO₄:Bi³⁺ exhibits a broad excitation band (250–400 nm), which matches with the emission of a commercial near-ultraviolet light-emitting diode chip. The cyan light peaked at 475 nm is observed, which is attributed to the ³P₁→¹S₀ transition of Bi³⁺. The thermal quenching experiment was performed, and the activation energy was calculated as 0.36 eV. Finally, full-spectrum white light-emitting diode devices were fabricated using SrLaGaO₄:Bi³⁺ phosphors, commercial blue BaMgAl₁₀O₁₇:Eu²⁺ phosphor, green (Ba, Sr)₂SiO₄:Eu²⁺ phosphor, and red CaAlSiN₃:Eu²⁺ phosphor, which displayed an International Commission on an illumination coordinate of (0.3732, 0.3850), a correlated color temperature of 4290 K, and a color rendering index of 93.2 at a drive current of 20 mA. This result indicates that SrLaGaO₄:Bi³⁺ plays an essential role in bridging the cyan gap, providing new inspiration for applying cyan-emitting phosphors in full-spectrum white lighting.     

Blue-light-excitable broadband yellow-emitting CaGd2HfSc(AlO4)3:Ce3+ garnet phosphors for white light-emitting diode devices with improved color rendering index

The current commercial white light-emitting diodes (LEDs) are generally based on the combination of blue LED chips and Y₃Al₅O₁₂:Ce³⁺ yellow phosphors. However, because of the lack of red component, such white LED devices exhibit cool white-light emissions with low color rendering index (Ra < 75, R9 < 0). Therefore, it is urgent to discover new blue-light-excitable yellow-emitting phosphors with enhanced red emissions for fabricating high color-quality white LEDs. In the present work, we demonstrate a novel broadband yellow-emitting CaGd₂HfScAl₃O₁₂:Ce³⁺ garnet phosphor for blue-light-excited white LEDs with improved color rendering index. The as-prepared CaGd₂HfScAl₃O₁₂:Ce³⁺ garnet phosphor possesses a cubic structure with Ia$\overline{3}$d space group, and the unit cell parameters of the representative CaGd₂HfScAl₃O₁₂:2%Ce³⁺ phosphor are a = b = c = 12.450 Å, α = β = γ = 90°, and V = 1,929.59(4) ų. Impressively, we find that the CaGd₂HfScAl₃O₁₂:Ce³⁺ garnet phosphor shows an intense absorption band in the 300–500 nm wavelength range with a maximum at 452 nm owing to the 4f→5d transition of Ce³⁺ ions. On 452 nm excitation, the optimal CaGd₂HfScAl₃O₁₂:2%Ce³⁺ sample exhibits a broad asymmetric yellow emission band in the wavelength range of 470–750 nm with peak at 564 nm and full width at half maximum of 151 nm. The Commission Internationale de l’Eclairage chromaticity coordinates and internal quantum efficiency of the CaGd₂HfScAl₃O₁₂:2%Ce³⁺ sample are (0.4485, 0.5157) and 30.4%, respectively. Finally, a white LED device is fabricated by combing a 450 nm blue LED chip with commercial Y₃Al₅O₁₂:Ce³⁺ yellow-emitting phosphor, which generates white light with low color rendering index (CRI; Ra = 74.7, R9 = ?12.7) and high correlated color temperature (CCT = 6,554 K) under the 60 mA driving current. In sharp contrast, another white LED device, which is made by coating our as-prepared CaGd₂HfScAl₃O₁₂:2%Ce³⁺ yellow-emitting phosphors onto the surface of a 450 nm blue LED chip, produces white-light emission with high CRI value (Ra = 84.5, R9 = 26.3) and relatively low CCT of 5,649 K. This work reveals that the newly discovered broadband yellow-emitting CaGd₂HfScAl₃O₁₂:Ce³⁺ phosphors can serve as a potential color converter in high-color-quality phosphor-converted white LEDs.     

Synthesis and characterization of novel blue emitting Na2CaSiO4:Ce3+ phosphor

The blue phosphors Na_(2?x)Ca_(1?x)SiO₄:xCe³⁺ were synthesized by the sol–gel method and their luminescence characteristics were investigated for the first time. Structural information about prepared samples is obtained by analyzing the XRD patterns and SEM micrographs. The photoluminescence (PL) excitation spectra indicate that the Na_(2?x)Ca_(1?x)SiO₄:xCe³⁺ phosphors can be effectively excited by ultraviolet (360 nm) light. The PL emission spectra exhibit tunable blue broadband emission with the dominant wavelength of 427–447 nm under excitation of 360 nm by controlling the doping concentration of Ce³⁺. The concentration quenching effect for Ce³⁺ was found at the optimum doping concentration of 4 mol%. The Commission Internationale de l’Eclairage 1931 chromaticity coordinates of Na_1.96Ca_0.96SiO₄:0.04Ce³⁺ are (0.1447, 0.0787), which are better color purity compared to the commercial Eu²⁺-doped BaMgAl₁₀O₁₇ phosphor. Na_1.96Ca_0.96SiO₄:0.04Ce³⁺ composition shows intense blue emission (peak wavelength, 439 nm) with relative intensity versus commercial BaMgAl₁₀O₁₇:Eu²⁺ blue phosphor (Nichia) 65 and 158 % under 254 and 365 nm excitation, respectively. All the results indicate that Na_(2?x)Ca_(1?x)SiO₄:xCe³⁺ phosphors are potential candidate as a blue emitting phosphor for UV-converting white light-emitting diodes.     

Synthesis and photoluminescence properties of tunable emission phosphors Ca4Si2O7F2:Ce3+

The Ce³⁺ activated phosphors Ca₄Si₂O₇F₂:Ce³⁺ are prepared by a solid state reaction technique. The UV–vis luminescence properties as well as fluorescence decay time spectra are investigated and discussed. The results revealed that there were two kinds of Ce³⁺ luminescence behavior with 408 and 470 nm emissions, respectively. Under 355 nm excitation, the Ce(1) emission (408 nm) is dominant at low doping concentration, and then the Ce(2) emission (470 nm) get more important with increasing of Ce³⁺ concentrations in the host. The phosphors Ca₄Si₂O₇F₂:xCe³⁺ show tunable emissions from blue area to green-blue area under near-ultraviolet light excitation, indicating a potential application in near-UV based w-LEDs.     

Unexpected Luminescence Properties of Sr0.25Ba0.75Si2O2N2:Eu2+—A Narrow Blue Emitting Oxonitridosilicate with Cation Ordering

Owing to a parity allowed 4f⁶(⁷F)5d¹→4f⁷(⁸S_7/2) transition, powders of the nominal composition Sr_0.25Ba_0.75Si₂O₂N₂:Eu²⁺ (2 mol % Eu²⁺) show surprising intense blue emission (λ_em=472 nm) when excited by UV to blue radiation. Similarly to other phases in the system Sr_1?xBa_xSi₂O₂N₂:Eu²⁺, the described compound is a promising phosphor material for pc‐LED applications as well. The FWHM of the emission band is 37 nm, representing the smallest value found for blue emitting (oxo)nitridosilicates so far. A combination of electron and X‐ray diffraction methods was used to determine the crystal structure of Sr_0.25Ba_0.75Si₂O₂N₂:Eu²⁺. HRTEM images reveal the intergrowth of nanodomains with SrSi₂O₂N₂ and BaSi₂O₂N₂‐type structures, which leads to pronounced diffuse scattering. Taking into account the intergrowth, the structure of the BaSi₂O₂N₂‐type domains was refined on single‐crystal diffraction data. In contrast to coplanar metal atom layers which are located between layers of condensed SiON₃‐tetrahedra in pure BaSi₂O₂N₂, in Sr_0.25Ba_0.75Si₂O₂N₂:Eu²⁺ corrugated metal atom layers occur. HRTEM image simulations indicate cation ordering in the final structure model, which, in combination with the corrugated metal atom layers, explains the unexpected and excellent luminescence properties.     

Morphology control and luminescence properties of BaMgAl10O17:Eu phosphors prepared by spray pyrolysis

Starting from the aqueous solutions of metal nitrates with citric acid and polyethylene glycol (PEG) as additives, BaMgAl₁₀O₁₇:Eu²⁺ (BAM:Eu²⁺) phosphors were prepared by a two-step spray pyrolysis (SP) method. X-ray powder diffraction (XRD), scanning electron microscopy (SEM) and photoluminescence spectra were used to characterize the resulted BAM:Eu²⁺ phosphors. The obtained BAM:Eu²⁺ phosphor particles have spherical shape, submicron size (0.5-3 μm). The effects of process conditions of the spray pyrolysis, such as molecular weight and concentration of PEG, on the morphology and luminescence properties of phosphor particles were investigated. Adequate amount of PEG was necessary for obtaining spherical particles, and the optimum emission intensity could be obtained when the concentration of PEG was 0.03 g/ml in the precursor solution. Moreover, the emission intensity of the phosphors increased with increasing of metal ion concentration in the solution. Compared with the BAM:Eu²⁺ phosphor prepared by citrate-gel method, spherical BAM:Eu²⁺ phosphor particles showed a higher emission intensity.