Optical channel drop filters based on photonic crystal ring resonators

A new optical channel drop filters (CDFs) configuration based on photonic crystals ring resonators (PCRRs) is provided. The transmission characteristics for single-ring and multiple-ring configurations have been investigated by using the two-dimensional (2D) finite-difference time-domain (FDTD) technique in triangular lattice photonic crystal (PC) silicon rods. Both forward and backward dropping were achieved in dual-ring PCRR structures. In this filter, 100% drop efficiency and acceptable quality factor can be obtained at 1550 nm. The present device can be used in the future photonic integrated circuits.     

Woodpile结构三维光子晶体中的四端口通道下载滤波器

基于三维光子晶体空间完全带隙的特性,本文在实验上构建了一种由非共面的两个波导和一个立体微腔组成的四端口通道下载滤波器。讨论了球体、正方体、长方体微腔滤波器的选频特性,以及连续旋转长方体微腔时,其输出频率的变化。研究结果表明,无论是对称型还是非对称型微腔,都可以较好地实现选频。提高微腔的不对称性,共振输出频率随之发生移动,说明改变微腔的对称性,可以有效调节滤波器的选频特性。连续旋转非对称型长方体微腔,输出频率会随之发生明显的移动,如果引入有效调节机制,可以产生连续调节输出频率的效果。该研究结果给多端口选择性输出空间滤波器的设计提供了新的思路,为光学器件集成化的设计提供了重要的理论参考。     

Highly confined and continuous single-mode operation of self-align photonic crystal oxide VCSEL

In this letter, we report on single-mode operation of originally multi-mode oxide VCSEL by using etched photonic crystal air holes and unique trench structure. The device fabrication utilized conventional photolithography; with simplified lithography step of self-aligning the photonic crystal and trench structures to the laser aperture for efficient and vigorous device processing. The fabricated photonic crystal VCSEL with trench device exhibits a single-mode output power of 0.7 mW, threshold current of 3.5 mA, slope efficiency of 0.10 W/A, and continuous single-mode output spectra at wide operating current range. The results are compared with conventional multi-mode oxide VCSEL of similar device geometry. In addition, theoretical analysis is presented for developing further understanding of the photonic crystal VCSEL.     

Single transverse mode control of VCSEL by photonic crystal and trench patterning

Single transverse mode control is achieved for multimode GaAs-based VCSEL by utilizing photonic crystal design and etched trench structure. Theoretical analysis is initially performed for photonic crystal design with various lattice constants and air holes diameter. The fabricated photonic crystal VCSEL with etched trench structure exhibits single mode output power of 0.7 mW, threshold current of 3.5 mA, slope efficiency of 0.10 W/A, and continuous single mode output spectrum throughout a wide operating current range. Comparison of typical oxide VCSEL, trench oxide VCSEL, and photonic crystal oxide VCSEL employing trench structure is presented. By combining photonic crystal and trench structure, single transverse mode operation of photonic crystal VCSEL can be much more strictly controlled.     

Hybrid photonic crystal 1.31/1.55 μm wavelength division multiplexer based on coupled line defect channels

The objective of this paper is to investigate the implementation of a hybrid photonic crystal (PhC) 1.31/1.55 μm wavelength division multiplexer (WDM) and wavelength channel interleaver with channel spacing of roughly 0.8 nm between the operating wavelengths of 1.54-1.56 μm. It is based on 1-D photonic crystal (PhC) structure connected with an output 2-D PhC structure. The power transfer efficiency of the hybrid PhC WDM at 1.31 μm and 1.55 μm were computed by eigen-mode expansion (EME) method to be about 88% at both the wavelengths. The extinction ratios obtained for the 1.31 μm and 1.55 μm wavelengths are − 25.8 dB and − 22.9 dB respectively.     

A new design of tunable four-port wavelength demultiplexer by photonic crystal ring resonators

A four-channel wavelength demultiplexer based on photonic crystal ring resonators (PCRR), which can be used for photonic integrated circuits, is designed. Dropping efficiency and Q factor of single improved ring are 100% and 842, respectively. In order to achieve the structure of demultiplexer, three improved rings have been used, that every ring has an individual inner rod radius; it means that each ring has a varying resonant wavelength. The results of simulation using finite-difference time-domain (FDTD) method in our proposed structure reveals an average transmitted power higher than 90% for each output port, Channel spacing is about 8 nm and bandwidth for each individual channel is about 2.8 nm. The mean value of the crosstalk between output channels and the area of the proposed structure are about −29 dB and 317 μm², respectively. By changing the radius of inner rods, various wavelengths can be chosen, therefore this device is tunable.     

Two bit all-optical analog-to-digital converter based on nonlinear Kerr effect in 2D photonic crystals

We have demonstrated the performance of a novel design for a single wavelength 2-bit all-optical analog-to-digital converter (ADC). This converter consists of two high efficient channel drop filters with a coupled cavity-based wavelength selective reflector in a 2D photonic crystal with total length of 15.87 μm. The A/D conversion is achieved by using nonlinear Kerr effect in the cavities. The output ports switch to state ‘1’ at different input power levels to generate unique states preferred for an ADC. This conversion is simulated by the finite difference time domain (FDTD) method for 5 different power levels. The proposed structure can function as a two-bit ADC with a 60 mW/μm input pulse and its maximum sampling rate is found to be ~ 45 GS/s.     

Multi-wavelength bismuth-based erbium-doped fiber laser based on four-wave mixing effect in photonic crystal fiber

A stable multi-wavelength erbium-doped fiber laser based on four-wave mixing (FWM) in a photonic crystal fiber (PCF) is demonstrated in this paper. The phase matching condition for four-wave mixing in the photonic crystal fiber has been enhanced using a seed signal and a polarisation controller to control the states of polarisation in the ring laser cavity. At a maximum pump power of 1480 nm, 5 lines are observed with nearly 2.15 nm spacing between the lines, and with a signal to noise ratio of more than 20 dB. The number of channels and wavelength spacing can be controlled by varying the output coupler ratio.     

Low power Electro-optical filter: Constructed using silicon nanobeam resonator and PIN junction

In this paper, a high tunable Electro-optical filter is designed and simulated with low electric power consumption. A silicon nanobeam resonator based on one-dimensional photonic crystal in the form of Fabry–Perot structure, silicon-on-insulator waveguide, is proposed with a PIN junction. In designing nanobeam resonator, “deterministic design method” is used to achieve the high quality factor and high-transmission rate. Tuning of the resonant wavelength in the output channel of the filter is achieved by manipulating the refractive index of the active area by using the free-carrier dispersion effect. The output wavelengths of designed device can be tuned for the telecom-friendly 1.55 µm range. The device shows a wavelength shift higher than 3 nm for a power consumption of only 0.9 mW. Finally, the simulation results show that the provided device can be considered as a narrowband and tunable Electro-optical filter that is suitable for DWDM communication system.     

An ultra compact photonic crystal wavelength division demultiplexer using resonance cavities in a modified Y-branch structure

An ultra small size 4-channel wavelength division demultiplexer based on 2D photonic crystal modified Y-Branch, suitable for integration, is proposed in this paper. The output wavelengths of designed structure can be tuned for communication applications (around 1550 nm) by choosing suitable defect parameters in the corner of each resonance cavity and output waveguides. The cross section of the structure is 313.28 μm² (17.8 μm × 17.6 μm) and desirable for integration based on popular planar technology. The bandwidth of each channel is near to 1 nm and the channel spacing is approximately 3.5 nm and wavelengths of demultiplexer channels are 1548.8 nm, 1551.9 nm, 1555.4 nm and 1559.3 nm respectively. Also, the crosstalk is between −33.1855 dB and −10.4947 dB. Furthermore, the mean values of the crosstalk and quality factor are −22.54 dB and 1496.7 respectively.     

Channel drop filter using photonic crystal ring resonators for CWDM communication systems

In this paper, a new optical channel drop filter (CDF) using photonic crystal ring resonators (PCRRs) is presented. Using the two-dimensional (2D) finite-difference time-domain (FDTD) method in triangular lattice photonic crystal (PC) silicon rods, 100% forward dropping efficiency and a quality factor of more than 1000 can be achieved in third communication window while the resonant wavelength is 1550 nm. Through this novel (CDF), a multi-CDF operation with 100% drop efficiencies across all channels can be obtained. The proposed device could be used in future coarse wavelength division multiplexing (CWDM) communication systems.     

Integrated photonic crystal spectrometers for sensing applications

A combination of negative refraction and diffraction compensation in a superprism-based photonic crystal structure is used to demonstrate a compact on-chip photonic crystal spectrometer. This structure provides strong dispersion and signal isolation, which are essential for forming an efficient and compact spectrometer. Performance of these spectrometers as spectral pattern detectors is discussed. The experimental results show that a PC structure with 80 μm × 220 μm dimension can locate a single spectral feature with better than 10 pm accuracy over a bandwidth of 50 nm around 1550 nm center wavelength at an output signal-to-noise ratio of 13 dB.     

980 nm Yb-doped double-clad photonic crystal fiber amplifier and its frequency doubling

In this paper, we report on a large-mode-area double-clad 980 nm Yb-doped photonic crystal fiber (PCF) amplifier. In the experiment, an output power of 1.21 W at 980 nm with 2.5 nm bandwidth has been yielded when the PCF length was 40 cm. Through frequency doubling the 980 nm amplified laser with a BIBO crystal, an output power of 51 mW at 490 nm has been generated.     

High-bandwidth and low-loss photonic crystal power-splitter with parallel output based on the integration of Y-junction and waveguide bends

A 1×2 power-splitter with parallel output that exhibits high-bandwidth and low-loss splitting for TE-polarized light is designed based on a photonic crystal slab in a silicon-on-insulator (SOI) material. The high performance is achieved by the integration of a Y-junction and 60° waveguide bends, which is designed to ensure single-mode operation, and keep the output channels of the power-splitter be parallel to the input channel. With a three-dimensional finite-difference time-domain (3D-FDTD) technique, ultralow-loss output of the optimized power-splitter with normalized transmission above 45% (in the range 3.216±0.18 dB) is obtained in the high-bandwidth range 1472–1634 nm, which covers the entire C-band of optical communication. In addition, the simulation results demonstrate that when the manufacture error of the lattice shift (dx) is in the range of ±10 nm, the disturbance of the transmission and the bandwidth are 1.52% and 6.79%, respectively. Both the specific result and the general idea of integration design are promising in the optical integrated circuit (OIC) and integrated optical devices in the future.     

1 × 4 optical multiplexer based on the self-collimation effect of 2D photonic crystal

In this paper, a novel 1 × 4 optical multiplexer (OMUX) based on the two dimensional photonic crystal embed cascaded Mach–Zehnder interferometer (MZI) employing self-collimation effect was proposed and its performance were numerically demonstrated. The 1 × 4 OMUX consists of four beam splitters and five mirrors. Light propagates in the OMUX employing self-collimation effect. The theoretical transmission spectra at different output ports of OMUX were analyzed with the theory of light interference. Then they were investigated with the finite-difference time-domain (FDTD) simulation technique. The simulation results indicate the cascaded Mach–Zehnder interferometer can work as a 1 × 4 optical multiplexer by selecting path length in the structure properly. For the drop wavelength 1550 nm, the free spectral range of the OMUX is about 24 nm, which almost covers the whole optical communication C-band window. The presented device that has no only a compact size but also a high output efficiency, may have practical applications in photonic integrated circuits.     

光子晶体方形谐振器波分解复用的特性

光通信系统设计中波分解复用器是分离光信号的一种关键部件,用于分离光信号的微型谐振器特性直接关系到波分复用(WDM,wavelength division multiplexing)解复用系统的工作性能。在二维光子晶体中逐步优化设计了基于光子晶体方形谐振器(PCSR,photonic crystal square resonator)的单信道WDM解复用结构,借助于耦合模理论(CMT,coupled-mode theory)定性分析了波导与谐振腔结构的电磁波耦合相互作用,并用时域有限差分法(FDTD,finite-difference time-domain)数值模拟了其结构工作特性。结果表明:基于PCSR设计的单输出端口WDM解复用结构在设计的参数范围中具有单谐振峰、中心波长宽调谐范围(1 501.4 nm~1 591.0 nm)、通带带宽窄(3.3 nm~9.1 nm)的特性。该结构可应用于WDM解复用光通信系统设计和光路集成设计等方面。     

Photonic drop splitters based on self-collimation ring resonators in a silicon photonic crystal

We report here 1 × 3 and 1 × 2 photonic drop splitters (PDSs) with different splitting ratios based on self-collimation ring resonators (SCRRs) in an air-hole silicon photonic crystal. An 1 × 3 PDS consists of four beam splitters and an 1 × 2 PDS consists of three beam splitters and one mirror. Light propagates in the PDSs employing self-collimation effect. The theoretical transmission spectra at different drop ports in PDSs were analyzed with the multiple-beam interference theory. Then they were investigated with the finite-difference time-domain (FDTD) simulation technique. The simulation results agree well with the theoretical prediction. For the drop wavelength 1550 nm, the free spectral range of the PDSs is about 29 nm, which almost covers the whole optical communication C-band window. Because of small dimensions, air-hole structure and whole-silicon material, the proposed PDSs hold great potentials for applications in photonic integrated circuits.     

Multiwavelength L-band fiber laser with bismuth-oxide EDF and photonic crystal fiber

A multiwavelength laser comb using a bismuth-based erbium-doped fiber and 50 m photonic crystal fiber is demonstrated in a ring cavity configuration. The fiber laser is solely pumped by a single 1455 nm Raman pump laser to exploit its higher power delivery compared to that of a single-mode laser diode pump. At 264 mW Raman pump power and 1 mW Brillouin pump power, 38 output channels in the L-band have been realized with an optical signal-to-noise ratio above 15 dB and a Stokes line spacing of 0.08 nm. The laser exhibits a tuning range of 12 nm and produces stable Stokes lines across the tuning range between Brillouin pump wavelengths of 1603 nm and 1615 nm.     

基于光子晶体的三端口分插复用器

提出了一种新的基于对称全反射壁的光子晶体分插复用器,与其他类型的光子晶体复用器相比,无需对介质柱进行复杂的调节即可实现100%上/下载,方便实际制造.提出的理论模型与基于二维时域有限差分(FDTD)法的数值实验相当吻合,显示出这种器件具有优良的上/下载性能.     

Design and fabrication of optical filters with very large stopband (≈500 nm) and small passband (1 nm) in silicon-on-insulator

In this paper, we report on the design, fabrication and characterization of a broadband photonic crystal filter. Modeling with a genetic algorithm (GA) was used to investigate the effect of changing the number of periods and thickness ratios of a photonic crystal filter structure with two alternating materials. Theoretical optimized parameters were obtained as a function of wavelength for a photonic crystal filter with a very broad filter bandwidth as well as a very narrow transmission window. We used the determined optimum parameters at a wavelength of 1550 nm to fabricate the structure using e-beam lithography and inductively coupled plasma (ICP) etching. Experimental results show that the structure indeed has a very narrow transmission window and a low loss of just 4 dB. Hence, this structure can be regarded as a high precision filter for optical communication and photonic integrated chip technologies.