Effect of ultrasonic treatment on the activity of sugar metabolism relative enzymes and quality of coconut water

In this study, tender coconuts were treated with high-intensity ultrasound (US) for 20 min at a frequency of 20 kHz and a power of 2400 W. Compared with control group, US treated coconut water had a higher content of total soluble solid and sugar/acid ratio along with a lower pH value and conductivity, and the contents of sucrose, fructose and glucose were also higher. Results from HS-SPME/GC–MS showed that there was no significant difference in the content of volatile compounds in coconut water before and after US treatment. The activities of sugar metabolism enzymes such as sucrose phosphate synthase, sucrose synthase, acid invertase (AI) and neutral invertase were inhibited by US, of which AI had the strongest inactivation. Circular dichroism and fluorescence spectra showed that the secondary and tertiary structure of AI molecule were destroyed with the increase of US intensity and time, which was confirmed by the change of particle size distribution pattern and scanning electron microscopy. Molecular docking and molecular dynamics showed that US treatment prevented the recognition and binding of sucrose and AI molecules, thereby inhibiting the decomposition of sucrose. In conclusion, our results indicate that US can inhibit the activity of AI and maintain the sugar content to increase the quality as well as extend the shelflife of coconut water, which will bring more commercial value.     

超声波在食品技术中的应用

强超声在媒质中传播时产生力学效应、空化效应和热效应,产匝此增强质量传输和热传递,对介质产生强的切向力。本文对超声波在辅助或强化提取,冷冻、乳化、结晶和干燥等食品的加工技术中应用加以综述。     

The uses of ultrasound in food technology

The same physical and mechanical effects which have been utilised in sonochemistry, i.e. strong shear forces, particle fragmentation, increased mass and heat transfer, nucleation of seedling, have been applied to food processing. Examples are quoted from various applications where power ultrasound has been used to influence the development of living cells, improve sterilisation and effect enzyme activity. Typically ultrasound can be used as a processing aid in extraction, crystallisation, freezing, emulsification, filtration and drying.     

Dual-mode transducers for ultrasound imaging and thermal therapy

Medical imaging is a vital component of high intensity focused ultrasound (HIFU) therapy, which is gaining clinical acceptance for tissue ablation and cancer therapy. Imaging is necessary to plan and guide the application of therapeutic ultrasound, and to monitor the effects it induces in tissue. Because they can transmit high intensity continuous wave ultrasound for treatment and pulsed ultrasound for imaging, dual-mode transducers aim to improve the guidance and monitoring stages. Their primary advantage is implicit registration between the imaging and treatment axes, and so they can help ensure before treatment that the therapeutic beam is correctly aligned with the planned treatment volume. During treatment, imaging signals can be processed in real-time to assess acoustic properties of the tissue that are related to thermal ablation. Piezocomposite materials are favorable for dual-mode transducers because of their improved bandwidth, which in turn improves imaging performance while maintaining high efficiency for treatment. Here we present our experiences with three dual-mode transducers for interstitial applications. The first was an 11-MHz monoelement designed for use in the bile duct. It had a aperture that was cylindrically focused to 10 mm. The applicator motion was step-wise rotational for imaging and therapy over a 360°, or smaller, sector. The second transducer had 5-elements, each measuring for a total aperture of . It operated at 5.6 MHz, was cylindrically focused to 14 mm, and was integrated with a servo-controlled oscillating probe designed for sector imaging and directive therapy in the liver. The last transducer was a 5-MHz, 64-element linear array designed for beam-formed imaging and therapy. The aperture was with a pitch of 0.280 mm. Characterization results included conversion efficiencies above 50%, pulse-echo bandwidths above 50%, surface intensities up to , and axial imaging resolutions to 0.2 mm. The second transducer was evaluated in vivo using porcine liver, where coagulation necrosis was induced up to a depth of 20 mm in 120 s. B-mode and M-mode images displayed a hypoechoic region that agreed well with lesion depth observed by gross histology. These feasibility studies demonstrate that the dual-mode transducers had imaging performance that was sufficient to aid the guidance and monitoring of treatment, and could sustain high intensities to induce coagulation necrosis in vivo.     

Recent innovations of ultrasound green technology in herbal phytochemistry: A review

Ultrasound (US) has become one of the most important techniques in green chemistry and emerging technologies. Many research investigations documented the usefulness of US in a wide range of applications in food science, nanotechnology, and complementary medicine, where effective extraction of natural products is important. However, as with all novel technologies, US has advantages and limitations that require clarification for full adaptation at an industrial scale. The present review discusses recent applications of US in herbal phytochemistry with the emphasis on US effects on chemical structures of bioactive compounds extracted from herbs and their bioactivities. The impact of different US processing conditions such as frequency, intensity, duration, temperature, and pressure on the effectiveness of the extraction process and the properties of the extracted materials are also discussed. Different frequencies and intensities of US have demonstrated its potential applications in modifying, determining, and predicting the physicochemical properties of herbs and their extracts. US has important applications in nanotechnology where it supports the fabrication of inexpensive and eco-friendly herbal nanostructures, as well as acoustic-based biosensors for chemical imaging of the herbal tissues. The application of US enhances the rates of chemical processes such as hydrolysis of herbal fibers, which reduces the time and energy consumed without affecting the quality of the final products. Overall, the use of US in herbal science has great potential to create novel chemical constructions and to be used as an innovative diagnostic system in various biomedical, food, and analytical applications.     

Application of ultrasound technology in the drying of food products

This study presents a state-of-the-art overview on the application of ultrasound technology in the drying of food products, including the ultrasound pre-treatment and ultrasound assisted drying. The effect of main parameters and ultrasound technology on the drying kinetics and food quality were discussed. Inconsistencies were pointed out and analyzed in detail. Results showed that for ultrasound pre-treatment, the food products may lose or gain water and increase of ultrasonic parameters (sonication time, amplitude and ultrasound power) promoted the water loss or water gain. When ultrasound technology was applied prior to drying, an increase in drying kinetics was always observed, though some different results were also presented. For ultrasound assisted drying, the ultrasound power always gave a positive effect on the drying process, however, the magnitude of ultrasound improvement was largely dependent on the process variables, such as air velocity, air temperature, microwave power and vacuum pressure, etc. The application of ultrasound technology will somehow affect the food quality, including the physical and chemical ones. Generally, the ultrasound application can decrease the water activity, improve the product color and reduce the nutrient loss.     

A review of recent advances in the decontamination of mycotoxin and inactivation of fungi by ultrasound

Innovative technologies for the pasteurization of food products have increased due to the global demand for higher-quality food products. In this regard, the current article aimed to provide an overview regarding the latest research on US application in the decontamination of fungi in food products and highlight the parameters influencing the effectiveness of this method. Therefore, the related article with inactivation of fungi and mycotoxins by ultrasound among last four years (2018–2021) by using terms such as 'mycotoxin,' 'inactivation,' 'ultrasound,' 'decontamination' among some international databases such as PubMed, Web of Science, Embase and Google Scholar“ was retrieved. Ultrasound (US) is considered a non-thermal decontamination method for food products. In US, the release of energy due to the acoustic phenomenon destroys microorganisms. This technology is advantageous as it is inexpensive, eco-friendly, and does not negatively affect food products' food structure and organoleptic properties. The influence of the US on food structure and organoleptic properties dramatically depends on the intensity and energy density applied In addition, it can preserve higher levels of ascorbic acid, lycopene, and chlorophyll in sonicated food products. The treatment conditions, including frequency, intensity, duration, temperature, and processing pressure, influence the effectiveness of decontamination. However, US displays synergistic or antagonistic effects on bacteria, yeasts, molds, and mycotoxins when combined with other types of decontamination methods such as chemical and thermal approaches. Thus, further research is needed to clarify these effects. Overall, the application of US methods in the food industry for decreasing the microbial content of food products during processing has been applied. However, the use of US with other techniques needs to be studied further.     

A novel continuous hydrodynamic cavitation technology for the inactivation of pathogens in milk

Hydrodynamic cavitation is a powerful tool for the enhancement of various processing applications. This study utilizes continuous hydrodynamic cavitation (CHC) for the inactivation of pathogens in milk for the first time. The thermal characteristics, inactivation performance, damage on the nutritional composition, product safety, and cost of the advanced rotational hydrodynamic cavitation reactor at pilot scale were comprehensively investigated. The inactivation results demonstrated that 5.89, 5.53, and 2.99 ± 0.08 log reductions of Escherichia coli, Staphylococcus aureus, and Bacillus cereus were achieved, respectively, at a final treatment temperature of 70 °C for 1–2 s. Moreover, the detrimental effect of CHC on the nutritional composition of milk, including mineral, fat, protein, and vitamin contents, was similar to that of high-temperature short-time method. The change in the concentrations of general bacteria and E. coli, as well as the pH value and acidity of the CHC treated milk stored at 5 °C for 14 days was found to be close to that of low-temperature long-time pasteurized milk. The cost of the present CHC treatment was $0.00268/L with a production rate of 4.2 L/min. CHC appears to be a remarkable method for the continuous processing of milk, as well as other liquid foods with high nutrition and “fresh-picked” flavor, due to its high efficacy, good scalability, high production capacity, and low operating and equipment costs.     

The effect of ultrasound treatment in combination with nisin on the inactivation of Listeria innocua and Escherichia coli

Ultrasound, alone or in combination with natural antimicrobials, is a novel food processing technology of interest to replace traditional food decontamination methods, as it is milder than classical sterilisation (heat treatment) and maintains desirable sensory characteristics. However, ultrasound efficacy can be affected by food structure/composition, as well as the order in which combined treatments are applied. More specifically, treatments which target different cell components could result in enhanced inactivation if applied in the appropriate order. The microbial properties i.e. Gram positive/Gram negative can also impact the treatment efficacy.This work presents a systematic study of the combined effect of ultrasound and nisin on the inactivation of the bacteria Listeria innocua (Gram positive) and Escherichia coli (Gram negative), at a range of cavitation conditions (44, 500, 1000 kHz). The order of treatment application was varied, and the impact of system structure was also investigated by varying the concentration of Xanthan gum used to create the food model systems (0 – 0.5% w/v). Microbial inactivation kinetics were monitored, and advanced microscopy and flow cytometry techniques were utilised to quantify the impact of treatment on a cellular level.Ultrasound was shown to be effective against E. coli at 500 kHz only, with L. innocua demonstrating resistance to all frequencies studied. Enhanced inactivation of E. coli was observed for the combination of nisin and ultrasound at 500 kHz, but only when nisin was applied before ultrasound treatment. The system structure negatively impacted the inactivation efficacy. The combined effect of ultrasound and nisin on E. coli was attributed to short-lived destabilisation of the outer membrane as a result of sonication, allowing nisin to penetrate the cytoplasmic membrane and facilitate cell inactivation.     

Hybrid high-intensity ultrasound and microwave treatment: A review on its effect on quality and bioactivity of foods

With the growing of consumer’s demand for products ready to eat that can be elaborated with greener technologies without affecting to their organoleptic characteristics, the application of ultrasound combined with microwaves has been widely studied on food preservation treatments (drying, frying), extraction of high-value added compounds and enzymatic hydrolysis of proteins. This review presents a complete picture of current knowledge on the ultrasound combined with microwaves including the mechanisms, influencing factors, advantages and drawbacks, emphasising in several synergistic effects observed in different processes of strong importance in the food industry. Recent research has shown that this hybrid technology could not only minimise the disadvantages of power US for drying and frying but also improve the product quality and the efficiency of both cooking processes by lowering the energy consumption. Regarding extraction, current studies have corroborated that the combined method presents higher yields in less time, in comparison with those in the respective ultrasound and microwave separately. Additionally, recent results have indicated that the bioactive compounds extracted by this combined technology exhibit promising antitumor activities as well as antioxidant and hepatoprotective effects. Remarkably, this hybrid technology has been shown as a good pre-treatment since the structural changes that are produced in the molecules facilitate the subsequent action of enzymes. However, the combination of these techniques still requires a proper design to develop and optimized conditions are required to make a scale process, and it may lead to a major step concerning a sustainable development and utilization of bioactive compounds from natural products in real life.     

Insights into the scalability of magnetostrictive ultrasound technology for water treatment applications

To date, the successful application of large scale ultrasound in water treatment has been a challenge. Magnetostrictive ultrasound technologies for constructing a large-scale water treatment system are proposed in this study. Comprehensive energy evaluation of the proposed system was conducted. The effects of chosen waveform, scalability and reactor design on the performance of the system were explored using chemical dosimetry. Of the fundamental waveforms tested; sine, triangle and square, the highest chemical yield resulted from the square wave source. Scaling up from the 0.5 L bench-scale system to the 15 L large-scale unit resulted in a gain of approximately 50% in sonochemical efficiency (SE) for the system. The use of a reactor tank with 45° inclined sides further increased SE of the system by 70%. The ability of the large scale system in removing contaminants from natural water samples was also investigated. The results revealed that the large-scale unit was capable of achieving a maximum removal of microbes and dissolved organic carbon (DOC) of 35% and 5.7% respectively at a power density approximately 3.9 W/L. The results of this study suggest that magnetostrictive ultrasound technology excited with square wave has the potential to be competitive in the water treatment industry.     

Low intensity ultrasound as a pretreatment to drying of daylilies: Impact on enzyme inactivation,color changes and nutrition quality parameters

Effects of thermal and low intensity ultrasound combined with heat (LIUH) pretreatment prior to microwave vacuum drying on enzyme inactivation, color changes and nutrition quality properties of dried daylilies were investigated. The peroxidase (POD), ascorbic acid oxidase (AAO) and polyphenoloxidase (PPO) thermal and LIUH (0.2 and 0.4 W/cm²) inactivation were determined and compared at 70, 80 and 90 °C. Significant reduction in the POD, AAO and PPO activity was seen in daylilies after an ambient LIUH pretreatment than thermal pretreatment. POD, AAO and PPO thermal and LIUH inactivation followed the first order kinetics. LIUH pretreatment had a more positive influence on maintaining color of dried daylilies than thermal pretreatment. Furthermore, LIUH pretreatment resulted in a significant increase in chlorophylls, carotenoids (lutein, zeaxanthin and β-carotene), and a decrease in degree of browning and 5-hydroxymethylfurfural (HMF) when compared with thermal pretreatment. The antioxidant activity and contents of several nutritional components of dried daylilies pretreated by LIUH were also higher than that of dried daylilies pretreated by thermal pretreatment. This study provides a basis for the design of LIUH conditions to control vegetables browning and color changes prior to drying processing.     

Potential impact of ultrasound,pulsed electric field,high-pressure processing and microfludization against thermal treatments preservation regarding sugarcane juice (Saccharum officinarum)

Sugarcane juice (Saccharum officinarum) is a proven nutritious beverage with high levels of antioxidants, polyphenols, and other beneficial nutrients. It has recently gained consumer interest due to its high nutritional profile and alkaline nature. Still, high polyphenolic and sugar content start the fermentation in juice, resulting in dark coloration. Lately, some novel techniques have been introduced to extend shelf life and improve the nutritional value of sugarcane juice. The introduction of such processing technologies is beneficial over conventional processes and essential for producing chemical-free, high-quality, fresh juices. The synergistic impact of these novel technologies is also advantageous for preserving sugarcane juice. In literature, novel thermal, non-thermal and hurdle technologies have been executed to preserve sugarcane juice. These technologies include high hydrostatic pressure (HHP), ultrasound (US), pulsed electric field (PEF), ultraviolet irradiation (UV), ohmic heating (OH), microwave (MW), microfludization and ozone treatment. This review manifests the impact of novel thermal, non-thermal, and synergistic technologies on sugarcane juice processing and preservation characteristics. Non-thermal techniques have been successfully proved effective and showed better results than novel thermal treatments. Because they reduced microbial load and retained nutritional content, while thermal treatments degraded nutrients and flavor of sugarcane juice. Among non-thermal treatments, HHP is the most efficient technique for the preservation of sugarcane juice while OH is preferable in thermal techniques due to less nutritional loss.     

Application of ultrasound in combination with other technologies in food processing: A review

The use of non-thermal processing technologies has been on the surge due to ever increasing demand for highest quality convenient foods containing the natural taste & flavor and being free of chemical additives and preservatives. Among the various non-thermal processing methods, ultrasound technology has proven to be very valuable. Ultrasound processing, being used alone or in combination with other processing methods, yields significant positive results on the quality of foods, thus has been considered efficacious. Food processes performed under the action of ultrasound are believed to be affected in part by cavitation phenomenon and mass transfer enhancement. It is considered to be an emerging and promising technology and has been applied efficiently in food processing industry for several processes such as freezing, filtration, drying, separation, emulsion, sterilization, and extraction. Various researches have opined that ultrasound leads to an increase in the performance of the process and improves the quality factors of the food. The present paper will discuss the mechanical, chemical and biochemical effects produced by the propagation of high intensity ultrasonic waves through the medium. This review outlines the current knowledge about application of ultrasound in food technology including processing, preservation and extraction. In addition, the several advantages of ultrasound processing, which when combined with other different technologies (such as microwave, supercritical CO₂, high pressure processing, enzymatic extraction, etc.) are being examined. These include an array of effects such as effective mixing, retention of food characteristics, faster energy and mass transfer, reduced thermal and concentration gradients, effective extraction, increased production, and efficient alternative to conventional techniques. Furthermore, the paper presents the necessary theoretical background and details of the technology, technique, and safety precautions about ultrasound.     

Evaluation of ultrasound based sterilization approaches in terms of shelf life and quality parameters of fruit and vegetable juices

The present work evaluates the performance of ultrasound based sterilization approaches for processing of different fruit and vegetable juices in terms of microbial growth and changes in the quality parameters during the storage. Comparison with the conventional thermal processing has also been presented. A novel approach based on combination of ultrasound with ultraviolet irradiation and crude extract of essential oil from orange peels has been used for the first time. Identification of the microbial growth (total bacteria and yeast content) in the juices during the subsequent storage and assessing the safety for human consumption along with the changes in the quality parameters (Brix, titratable acidity, pH, ORP, salt, conductivity, TSS and TDS) has been investigated in details. The optimized ultrasound parameters for juice sterilization were established as ultrasound power of 100 W and treatment time of 15 min for the constant frequency operation (20 kHz). It has been established that more than 5 log reduction was achieved using the novel combined approaches based on ultrasound. The treated juices using different approaches based on ultrasound also showed lower microbial growth and improved quality characteristics as compared to the thermally processed juice. Scale up studies were also performed using spinach juice as the test sample with processing at 5 L volume for the first time. The ultrasound treated juice satisfied the microbiological and physiochemical safety limits in refrigerated storage conditions for 20 days for the large scale processing. Overall the present work conclusively established the usefulness of combined treatment approaches based on ultrasound for maintaining the microbiological safety of beverages with enhanced shelf life and excellent quality parameters as compared to the untreated and thermally processed juices.     

Effects of ultrasound energy density on the non-thermal pasteurization of chocolate milk beverage

This study presents the emerging high-intensity ultrasound (HIUS) processing as a non-thermal alternative to high-temperature short-time pasteurization (HTST). Chocolate milk beverage (CMB) was subjected to different ultrasound energy densities (0.3–3.0 kJ/cm³), as compared to HTST pasteurization (72 °C/15 s) aimed to verify the effect of the HIUS processing on the microbiological and physicochemical characteristics of the beverage. The application of HIUS at an energy density of 3.0 kJ/cm³ was able to reduce 3.56 ± 0.02 logarithmic cycles in the total aerobic counts. In addition, the ultrasound energy density affected the physical properties of the beverage as the size distribution of fat globule and rheological behavior, as well as the chemical properties such as antioxidant activity, ACE inhibitory activity, fatty acid profile, and volatile profile. In general, the different energetic densities used as a non-thermal method of pasteurization of CMB were more effective when compared to the conventional pasteurization by HTST, since they improved the microbiological and physicochemical quality, besides preserving the bioactive compounds and the nutritional quality of the product.     

The effects and mechanism of phycocyanin removal from water by high-frequency ultrasound treatment

The effects and mechanism of phycocyanin removal from water by high-frequency ultrasound treatment were studied. The efficiency of sonication treatment in removing proteins derived from algal cells was investigated, and the factors influencing the process, including the effects of coagulation, were also studied. In addition, sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE), the three-dimensional fluorescence spectrum, and mass spectrum were used to illustrate the removal mechanism. The results indicated that phycocyanin can be degraded to the point where it is barely detectable in water samples after 180 min of high-frequency sonication. While the total nitrogen (TN) concentration remained consistent during the entire sonication process (240 min), about 78.9% of the dissolved organic nitrogen (DON) was oxidized into inorganic nitrogen. The sonication effect was greatly influenced by the ultrasound frequency, with 200 kHz having the highest removal performance due to the large production of hydroxyl (HO) radicals. Coagulation was adversely influenced by sonication in the first 60 min due to the cross-linking reaction between protein molecules caused by the sonication. The influence of sonication weakened with sonication time due to the further degradation of the proteins by ultrasound. The variation of the TN, DON, and inorganic nitrogen indicated that the main mechanism occurring during the high-frequency sonication of the phycocyanin was the direct oxidation of the radicals, which was totally different from of the mechanism occurring during ultrasound with low frequency.     

Inactivation of microorganisms by low-frequency high-power ultrasound: 2. A simple model for the inactivation mechanism

A simple theoretical model based on shear forces generated by the collapse of the ultrasound cavities near the surface of a microorganism is proposed. This model requires two parameters which take into account the number of acoustic cavitation bubbles, and the resistance of the cell wall of the microorganism to the shear forces generated by bubble collapse. To validate the model, high-power low frequency (20 kHz) ultrasound was used to inactivate two microorganisms with very different sizes, viz., a bacterium, Enterobacter aerogenes and a yeast, Aureobasidium pullulans. The inactivation ratio was experimentally measured as a function of sonication time for different ultrasound power and for different initial cell numbers. For both E. aerogenes and A. pullulans the Log of the inactivation ratio decreased linearly with sonication time, and the rate of inactivation increased (D-value decreased) with the increase in sonication power. The rate of inactivation was also found, for both microorganisms, to increase with a decrease in the initial cell number. The fits, obtained using the proposed model, are in very good agreement with the experimental data.     

Combination of supercritical CO2 and high-power ultrasound for the inactivation of fungal and bacterial spores in lipid emulsions

For the first time, this study addresses the intensification of supercritical carbon dioxide (SC-CO₂) treatments using high-power ultrasound (HPU) for the inactivation of fungal (Aspergillus niger) and bacterial (Clostridium butyricum) spores in oil-in-water emulsions. The inactivation kinetics were analyzed at different pressures (100, 350 and 550 bar) and temperatures (50, 60, 70, 80, 85 °C), depending on the microorganism, and compared to the conventional thermal treatment. The inactivation kinetics were satisfactorily described using the Weibull model.Experimental results showed that SC-CO₂ enhanced the inactivation level of both spores when compared to thermal treatments. Bacterial spores (C. butyricum) were found to be more resistant to SC-CO₂ + HPU, than fungal (A. niger) ones, as also observed in the thermal and SC-CO₂ treatments. The application of HPU intensified the SC-CO₂ inactivation of C. butyricum spores, e.g. shortening the total inactivation time from 10 to 3 min at 85 °C. However, HPU did not affect the SC-CO₂ inactivation of A. niger spores. The study into the effect of a combined SC-CO₂ + HPU treatment has to be necessarily extended to other fungal and bacterial spores, and future studies should elucidate the impact of HPU application on the emulsion’s stability.     

Progress in developing a thermal method for measuring the output power of medical ultrasound transducers that exploits the pyroelectric effect

Progress in developing a new measurement method for ultrasound output power is described. It is a thermal-based technique with the acoustic power generated by a transducer being absorbed within a specially developed polyurethane rubber material, whose high absorption coefficient ensures energy deposition within a few mm of the ultrasonic wave entering the material. The rate of change of temperature at the absorber surface is monitored using the pyroelectric voltage generated from electrodes disposed either side of a 60 mm diameter, 0.061 mm thick membrane of the piezoelectric polymer polyvinylidene fluoride (pvdf) bonded to the absorber. The change in the pyroelectric output voltage generated by the sensor when the transducer is switched ON and OFF is proportional to the delivered ultrasound power. The sensitivity of the device is defined as the magnitude of these switch voltages to a unit input stimulus of power (watt). Three important aspects of the performance of the pyroelectric sensor have been studied. Firstly, measurements have revealed that the temperature dependent sensitivity increases over the range from approximately 20 °C to 30 °C at a rate of +1.6% °C⁻¹. Studies point to the key role that the properties of both the absorbing backing layer and pvdf membrane play in controlling the sensor response. Secondly, the high sensitivity of the technique has been demonstrated using an NPL Pulsed Checksource, a 3.5 MHz focused transducer delivering a nominal acoustic power level of 4 mW. Finally, proof-of-concept of a new type of acoustic sensor responding to time-averaged intensity has been demonstrated, through fabrication of an absorber-backed hydrophone of nominal active element diameter 0.4 mm. A preliminary study using such a device to resolve the spatial distribution of acoustic intensity within plane-piston and focused 3.5 MHz acoustic fields has been completed. Derived beam profiles are compared to conventional techniques that depend on deriving intensity from acoustic pressure measurements made using the sensor as a calibrated hydrophone.