Structural,elastic, electronic and optical properties of the newly synthesized monoclinic Zintl phase BaIn2P2

The present study explores the structural, elastic, electronic and optical properties of the newly synthesized monoclinic Zintl phase BaIn₂P₂ using a pseudopotential plane-wave method in the framework of density functional theory within the generalized gradient approximation. The calculated lattice constants and internal coordinates are in very good agreement with the experimental findings. Independent single-crystal elastic constants as well as numerical estimations of the bulk modulus, the shear modulus, Young's modulus, Poisson's ratio, Pugh's indicator of brittle/ductile behaviour and the Debye temperature for the corresponding polycrystalline phase were obtained. The elastic anisotropy of BaIn₂P₂ was investigated using three different indexes. The calculated electronic band structure and the total and site-projected l-decomposed densities of states reveal that this compound is a direct narrow-band-gap semiconductor. Under the influence of hydrostatic pressure, the direct D–D band gap transforms into an indirect B-D band gap at 4.08 GPa, then into a B–Γ band gap at 10.56 GPa. Optical macroscopic constants, namely, the dielectric function, refractive index, extinction coefficient, reflectivity coefficient, absorption coefficient and energy-loss function, for polarized incident radiation along the [100], [010] and [001] directions were investigated.     

Theoretical investigations of the elastic,electronic, optical and thermodynamics properties of SrSi

The crystal structural, electronic, optical and thermodynamic properties of SrSi are investigated by using the first-principles plane-wave pseudopotential density function theory within the generalized gradient approximation (GGA). We have calculated the ground states properties and they are in good agreement with the available experimental data and other theoretical results. We have obtained the electronic structure and density of states, and the results showed that both of Immm and Cmcm phases are metal material. The elastic properties such as elastic constants, shear modulus, Young's modulus and Poisson's ratio are obtained for the first time. Furthermore, the optical properties are reported for radiation up to 30 eV. Finally, the thermodynamic properties of Cmcm phase such as free energy, entropy, enthalpy, heat capacity and Debye temperature are given for reference.     

Full potential study of the elastic, electronic, and optical properties of spinels MgIn2S4 and CdIn2S4 under pressure effect

The structural, elastic, electronic, and optical properties of cubic spinel MgIn₂S₄ and CdIn₂S₄ compounds have been calculated using a full relativistic version of the full-potential linearized-augmented plane wave with the mixed basis FP/APW+lo method. The exchange and correlation potential is treated by the generalized-gradient approximation (GGA). Moreover, the Engel-Vosko GGA formalism is also applied to optimize the corresponding potential for band structure calculations. The ground state properties, including the lattice constants, the internal parameter, the bulk modulus, and the pressure derivative of the bulk modulus are in reasonable agreement with the available data. Using the total energy-strain technique, we have determined the full set of first-order elastic constants C_ij and their pressure dependence, which have not been calculated or measured yet. The shear modulus, Young’s modulus, and Poisson’s ratio are calculated for polycrystalline XIn₂S₄ aggregates. The Debye temperature is estimated from the average sound velocity. Electronic band structures show a direct band gap (Г-Г) for MgIn₂S₄ and an indirect band gap (K-Г) for CdIn₂S₄. The calculated band gaps with EVGGA show a significant improvement over the GGA. The optical constants, including the dielectric function ε(ω), the refractive index n(ω), the reflectivity R(ω), and the energy loss function L(ω) were calculated for radiation up to 30 eV.     

First-principles investigations on structural,electronic and elastic properties of BeSe under high pressure

The structural, electronic and elastic properties of BeSe in both B3 and B8 structures have been studied by first-principles calculations within the generalized gradient approximation (GGA). The calculated lattice parameters and bulk modulus of BeSe are in reasonable agreement with previous results. The predicted value of phase transition pressure from B3 to B8 is 50.24 GPa, which is well in line with the experimental data (56 ± 5 GPa). The calculation of the electronic band structure shows that the energy gap is indirect for B3 and B8 phases. Especially, the elastic constants of B8 BeSe under high pressure were studied for the first time. The bulk modulus, shear modulus, compressional and shear wave velocities of B8 BeSe evaluated from elastic constants as a function of pressure were investigated. In addition, Poisson's radio, elastic anisotropy and Debye temperature were analyzed successfully.     

Theoretical investigation of the structural,elastic, electronic and optical properties of the ternary indium sulfide layered structures AInS2 (A = K,Rb and Cs)

Ab initio calculations were performed to investigate the structural, elastic, electronic and optical properties of the ternary layered systems AInS₂ (A = K, Rb and Cs). The calculated structural parameters are in good agreement with the existing experimental data. Analysis of the electronic band structure shows that the three studied materials are direct band-gap semiconductors. Density of states, charge transfers and charge density distribution maps were computed and analyzed. Numerical estimations of the elastic moduli and their related properties for single-crystal and polycrystalline aggregates were predicted. The optical properties were calculated for incident radiation polarized along the [100], [010] and [001] crystallographic directions. The studied materials exhibit a noticeable anisotropic behaviour in the elastic and optical properties, which is expected due to the symmetry and the layered nature of these compounds.     

First principles calculations of electronic and optical properties of Ag2S

A theoretical study of structural, electronic and optical properties of Ag₂S is presented using the full potential linearized augmented plane wave (FP-LAPW) method within density functional theory (DFT). In this approach, the modified Becke Johnson (MBJ) potential coupled with Local Density Approximation (LDA) was used for the exchange-correlation potential calculation. Ground state properties are determined for the bulk material in monoclinic phase. Band structure reveals that this compound is a direct energy band gap semiconductor. MBJLDA results for the band gap of this compound are much better than those obtained using LDA, Perdew–Burke–Ernzerhof generalized gradient approximation (PBE-GGA) and Engel–Vosko's GGA (EV-GGA). A very good agreement is observed between MBJLDA band gap and corresponding experimental values as compared to other calculations. Optical constants including the dielectric function, refractive index, extinction coefficient, electron energy loss function, reflectivity and absorption coefficient are obtained and discussed.     

Structural, electronic and elastic properties of MAX phases M2GaN (M = Ti, V and Cr)

Based on first-principles total energy calculations, we have investigated the systematic trends for structural, electronic and elastic properties of the MAX phases M₂GaN depending on the type of M transition metal (M are Ti, V and Cr). The optimized zero pressure geometrical parameters: the two unit cell lengths (a, c), the internal coordinate z and the bulk modulus are calculated. The results for the lattice constants are in agreement with the available experimental data. The band structures show that all studied materials are electrical conductors. The analysis of the site-projected l-decomposed density of states shows that bonding is due to M d-N p and M d-Ga p hybridizations. The elastic constants are calculated using the static finite strain technique. The shear modulus C₄₄, which is directly related to the hardness, reaches its maximum when the valence electron concentration is in the range 10.5–11.0. The isotropic elastic moduli, namely, bulk modulus (B), shear modulus (G), Young's modulus (E) and Poisson's ratio (σ) are calculated in framework of the Voigt–Reuss–Hill approximation for ideal polycrystalline M₂GaN aggregates. We estimated the Debye temperature of M₂GaN from the average sound velocity. This is the first quantitative theoretical prediction of the electronic structures, and elastic constants and related properties for Ti₂GaN, V₂GaN and Cr₂GaN compounds that require experimental confirmation.     

DFT calculation of the electronic and optical properties of Ag2PdO2 from X-ray and neutron crystallographic data

Electronic and optical properties of ternary silver palladium oxide (Ag₂PdO₂) are investigated using density functional theory. Two different possible approximations for the exchange correlation potentials were employed. The X-ray and neutron crystallographic data were optimized by minimization of the forces (1 mRy/a.u.) acting on the atoms. The electronic structure, electron space charge density, chemical bonding and optical dielectric were determined from the relaxed geometry seeking deep insight understanding of this material. Our calculated energy band gap (0.15 eV) shows a good agreement with the experimental value (0.18 eV).     

Structural, thermodynamic and optical properties of MgF2 studied from first-principles theory

A detailed theoretical study of structural, electronic, elastic, thermodynamic and optical properties of rutile type MgF₂ has been carried out by means of first-principles Density Functional Theory (DFT) calculations using plane wave pseudo-potentials within the local density approximation and generalized-gradient approximation for the exchange and correlation functionals. The calculated ground state properties and elastic constants agree quite well with experimental values. From the calculated elastic constants we conclude that MgF₂ is relatively hard when compared to other alkaline-earth fluorides and ductile in nature. The thermodynamic properties such as heat capacity, entropy, free energy, phonon density of states and Debye temperatures are calculated at various temperatures from the lattice dynamical data obtained through the quasi-harmonic Debye model. From free energy and entropy it is found that the system is thermodynamically stable up to 1200 K. The imaginary part of the calculated dielectric function ε₂(ω) could reproduce the six prominent peaks which are observed in experiment. From the calculated ε(ω), other optical properties such as refractive index, reflectivity and electron energy-loss spectrum are obtained up to the photon energy range of 30 eV.     

Electronic and optical properties of ZnSc2S4 and CdSc2S4 cubic spinels by the modified Becke–Johnson density functional

Structural, electronic and optical properties of the ZnSc₂S₄ and CdSc₂S₄ cubic spinels have been investigated by means of the full-potential (linearized) augmented plane wave plus local orbitals based on density functional theory. The exchange-correlation potential is treated by the GGA–PBEsol [J.P. Perdew, A. Ruzsinszky, G.I. Csonka, O.A. Vydrov, G.E. Scuseria, L.A. Constantin, X. Zhou, K. Burke, Phys. Rev. Lett. 100 (2008) 136406] and the recently proposed modified Becke–Johnson potential approximation (mBJ) [F. Tran, P. Blaha, Phys. Rev. Lett. 102 (2009) 226401], which successfully corrects the band-gap problem found with GGA for a wide range of materials. The obtained structural parameters are in good agreement with the available experimental data. This gives support for the predict properties for ZnSc₂S₄ and CdSc₂S₄. The band structures reveal that both compounds are semiconductor with a direct gap. The obtained gap values show that mBJ is superior for estimating band gap energy. We have calculated the electron and hole effective masses in different directions. The density of states has been analyzed. Based on our electronic structure obtained using the mBJ method we have calculated various optical properties, including the complex dielectric function ɛ(ω), complex index of refraction n(ω), reflectivity coefficient R(ω), absorption coefficient α(ω) and electron energy-loss function L(ω) as functions of the photon energy. We find that the values of zero-frequency limit ɛ₁(0) increase with decreasing the energy band gap in agreement with the Penn model. The origin of the peaks and structures in the optical spectra is determined in terms of the calculated energy band structures.     

Theoretical study of the structural,elastic, electronic and optical properties of XCaF3 (X = K and Rb)

The PLANE WAVE pseudo-potential method within density functional theory (DFT) has been used to investigate the structural, elastic, electronic and optical properties of XCaF₃ (X = K and Rb) insulating. The studied compounds show a weak resistance to shear deformation compared to the resistance to the unidirectional compression. KCaF₃ and RbCaF₃ are considered ductile. The elastic constants and related parameters were predicted. The stiffness is more important in KCaF₃, whereas, the lateral expansion is more important in RbCaF₃. KCaF₃ and RbCaF₃ have R- Г indirect band gap. The main peaks in the imaginary part of the dielectric function correspond to the transition from the occupied state F₋p to the unoccupied states Ca: s or K, Rb: p. At lower energies, KCaF₃ and RbCaF₃ show the same optical properties. Under pressure effect, the peaks of imaginary part of dielectric function were shifted toward high energy.     

Structural,mechanical, electronic,optical properties and effective masses of CuMO2 (M = Sc,Y, La) compounds: First-principles calculations

The structural, elastic, mechanical, electronic, optical properties and effective masses of CuM_IIIBO₂ (M_IIIB = Sc, Y, La) compounds have been investigated by the plane-wave ultrasoft pseudopotential technique based on the first-principles density-functional theory under local density approximation. The equilibrium structural parameters are in good agreement with previous experimental and theoretical data. To our knowledge, there are no available data of elastic constants for comparison. The bulk, shear and Young's modulus, ratio of B/G, Poisson's ratio and Lamé's constants of CuM_IIIBO₂ have been studied. The electronic structures of CuM_IIIBO₂ are consistent with other calculations. The population analysis, charge densities and effective masses have been shown and analyzed. The imaginary and real parts of the dielectric function, refractive index and extinction coefficient of CuM_IIIBO₂ are calculated. The interband transitions to absorption of CuM_IIIBO₂ have been analyzed.     

First-principles study of structural,elastic, electronic and vibrational properties of BiCoO3

We used density functional theory (DFT) to study the structural, elastic, electronic, and lattice dynamical properties of tetragonal BiCoO₃ applying the “norm-conserving” pseudopotentials within the local spin density approximation (LSDA). The calculated equilibrium lattice parameters and atomic displacements are in agreement with the available experimental and theoretical results. Moreover, the structural stability of tetragonal BiCoO₃ were confirmed by the calculated elastic constants. In addition, the elastic properties of polycrystalline aggregates including bulk, shear and Young's moduli, and Poisson's ratio are also determined. The electronic band structure, total and partial density of states (DOS and PDOS) with ferromagnetic spin configuration are obtained. The results show that tetragonal BiCoO₃ has an indirect band gap with both up- and down-spin configurations and its bonding behavior is of covalent nature. We compute Born effective charge (BEC) which is found to be quite anisotropic of Bi, Co and O atoms. The infrared and Raman active phonon mode frequencies at the Г point are found. The phonon dispersion curves exhibit imaginary frequencies which lead from the high-symmetry tetragonal phase to low-symmetry rhombohedral phase in BiCoO₃. The six independent elastic constants, including bulk, shear and Young's moduli, and Poisson's ratio, complete BEC tensor and phonon dispersion relations in tetragonal BiCoO₃ are predicted for the first time. Results of the calculations are compared with the existing experimental and theoretical data.     

闪锌矿MTe (M=Zn/Mg)的几何结构、弹性性质、电子结构和光学性质

采用基于密度泛函理论(DFT)框架下广义梯度近似(GGA)平面波超软赝势(PP-PW)方法, 计算了闪锌矿型MTe (M=Zn/Mg)的几何结构、弹性性质、电子结构和光学性质. 同时采用杂化密度泛函调准了带隙. 结果表明, 立方相ZnTe和MgTe均为直接带隙半导体材料. 所得晶格参数、弹性常数及体模量与实验数据基本吻合. 由弹性常数推导出ZnTe、MgTe的德拜温度分别为758、585 K. 研究了MTe的复介电函数、折射率、反射率和能量损失系数等光学性质, 并基于电子能带结构和态密度对光学性质进行了解释.     

First-principles calculations of the structural,elastic and electronic properties of MNxC1−x (M = Ti,Zr, Hf; 0 ≤ x ≤ 1) carbonitrides at ambient and elevated hydrostatic pressure

The structural, electronic, and elastic properties of three mixed transition metal carbonitrides TiN_xC_1−x, ZrN_xC_1−x, and HfN_xC_1−x (0 ≤ x ≤ 1) with the rock-salt structure were calculated at ambient and elevated up to 50 GPa hydrostatic pressures in the framework of the density functional theory methods. The lattice constants, densities, and bulk moduli of the considered compounds were shown to behave as linear functions of the nitrogen concentration x. The obtained linear dependencies of all these parameters allow for getting their estimates at any value of x in the range from 0 to 1. Gradual enhancement of the ionicity of the chemical bonds with gradual replacement of carbon by nitrogen was demonstrated by calculating the bond orders and electron density difference distributions.     

Structural,electronic and elastic properties of the Laves phases WFe2, MoFe2, WCr2 and MoCr2 from first-principles

A theoretical analysis of the phase stability, electronic and mechanical properties, and Debye temperatures of the C14-type Laves phases (WFe₂, MoFe₂, WCr₂ and MoCr₂) has been presented from density functional theory. The phase stability follows the order: WFe₂>MoFe₂>WCr₂>MoCr₂. An exchange of electrons takes place between Fe and W/Mo atoms, and there is also electron transfer between Cr and W/Mo. The W–W and Mo–Mo bonds are of the valence character, while the Fe–W/Mo and Cr–W/Mo bonds are of ionic character. The bonding force of A–A is greater than that of A–B in C-14 AB₂ type Laves phases (WFe₂, MoFe₂, WCr₂ and MoCr₂). The ductility of MoCr₂ is higher than others. The hardness of WFe₂ (14.1 GPa) is the highest, and the hardness of MoCr₂ is the lowest. The incompressibility for these laves phases along c-axis is larger than that along a-axis. The Debye temperature (θ_D) of MoFe₂ is 619 K, which is the highest in those phases. These laves phases also have high melting points, which follows the order: WFe₂>MoFe₂>WCr₂>MoCr₂.     

Syntheses, crystal and electronic structure, and some optical and transport properties of LnCuOTe (Ln=La, Ce, Nd)

Three new compounds, LaCuOTe, CeCuOTe, and NdCuOTe, have been synthesized from the respective rare-earth elements, CuO, and a KI flux at 1023 K. The compounds, which have the ZrSiCuAs structure type, are isostructural to LaCuOS, and crystallize in space group P4/nmm of the tetragonal system with two formula units in cells of dimensions at 153 K of , , for LaCuOTe; , , for CeCuOTe; and , , for NdCuOTe. The structure of LnCuOTe (Ln=La, Ce, Nd) is composed of alternating PbO-like [Ln₂O₂] and anti-PbO-like [Cu₂Te₂] layers stacked perpendicular to [0 0 1]. The experimental optical band gaps of LaCuOTe and NdCuOTe are 2.31 and 2.26 eV, respectively. At 298 K the electrical conductivity of LaCuOTe is 1.65 S/cm and the Hall mobility is +80.6 cm² V⁻¹ s⁻¹. The positive values of the Seebeck and Hall coefficients indicate p-type electrical conduction. First-principles theoretical calculations were performed on LaCuOQ (Q=S, Se, Te). In LaCuOTe, Cu 3d and Te 5p orbitals dominate the states near the valence band maximum; the states near the conduction band minimum are composed of Cu 4s, Te 5p, and La 5d orbitals. The larger dispersion of Cu 3d orbitals and the presence of Te 5p orbitals near the valence band maximum are responsible for the larger hole mobility of LaCuOTe compared to LaCuOS and LaCuOSe.     

Pressure effect on the structural and electronic properties of CuInS2

The pressure dependence of the bond length and energy gap in chalcopyrite CuInS₂ between 0 and 40 GPa has been investigated using pseudopotentials plane-wave method within the generalized gradient approximation for the exchange-correlation potential. We found that the bond length decreases as the pressure increases. Also, the energy gap of CuInS2 expands as the pressure increases with a rate of 10.693 meV/GPa. The linear pressure coefficient calculated is approximately half the reported experimental value of 23 meV/GPA. Our calculated bulk modulus of 68.7 GPa is in good agreement with the available experimental and theoretical values. The present calculations show that the d-electrons of Cu ions are one of the important factors that dominate the contributions to the I-VI bonds and the energy gap in CuInS₂.     

Elastic, electronic and thermal properties of YSZ from first principles

First principles calculations were performed to investigate the elastic, electronic and thermal properties of 14% cubic yttria-stabilized zirconia (YSZ) using the pseudo potential plane-wave method within the gradient generalized approximation (GGA) for the exchange and correlation potential. Computed lattice constant parameters are in good agreement with the available experimental results. The three independent elastic constants were computed by means of the stress-strain method, indicating that 14% cubic YSZ is a mechanically stable structure. From the knowledge of the elastic constants, a set of related properties, namely bulk, shear modulus, Young’s modulus, sound velocity, Debye temperature, thermal capacity and minimum thermal conductivity are numerically estimated in the frame work of the Voigt-Reuss-Hill approximation for YSZ polycrystalline. The calculated bulk modulus, shear modulus, Young’s modulus, sound velocity, Debye temperature, thermal capacity and minimum thermal conductivity are in reasonable agreement with the available experimental and theory data. Density of states, charge density and Mulliken population analysis show that the 14% cubic YSZ is covalent and possess ionic character.     

A comparative study of the optical properties of TbRhGe and DyRhGe

In this paper, experimental and theoretical optical properties of TbRhGe and DyRhGe have been reported and compared. Our measurements by the ellipsometric method in the wavelength range 0.22–15 μm revealed significant differences in energy positions of the interband peaks in the spectral functions of these ternary compounds. The electronic structure of TbRhGe and DyRhGe calculated within the LSDA + U method was used to obtain theoretical optical conductivity, which is in good agreement with the experimental one. Further analysis allowed us to track changes in interband transitions related to the rare-earth 4f and rhodium 4d states, which are responsible for the observed differences in optical properties of TbRhGe and DyRhGe compounds.