Comparison of polyethylene glycol adsorption to nanocellulose versus fumed silica in water

The recent intensification of industrially produced cellulose nanocrystals (CNCs) and cellulose nanofibrils has positioned nanocelluloses as promising materials for many water-based products and applications. However, for nanocelluloses to move beyond solely an academic interest, a thorough understanding of their interaction with water-soluble polymers is needed. In this work, we address a conflicting trend in literature that suggests polyethylene glycol (PEG) adsorbs to CNC surfaces by comparing the adsorption behaviour of PEG with CNCs versus fumed silica. While PEG is known to have strong hydrogen bonding tendencies and holds water tightly, it is sometimes (we believe erroneously) presumed that PEG binds to cellulose through hydrogen bonding in aqueous media. To test this assumption, the adsorption of PEG to CNCs and fumed silica (both in the form of particle films and in aqueous dispersions) was examined using quartz crystal microbalance with dissipation, isothermal titration calorimetry, rheology and dynamic light scattering. For all PEG molecular weights (300–10,000 g/mol) and concentrations (100–10,000 ppm) tested, strong rapid adsorption was found with fumed silica, whereas no adsorption to CNCs was observed. We conclude that unlike silanols, the hydroxyl groups on the surface of CNCs do not readily hydrogen bond with the ether oxygen in the PEG backbone. As such, this work along with previous papermaking literature supports the opinion that PEG does not adsorb to cellulose surfaces.     

Materials chemistry and the futurist eco-friendly applications of nanocellulose: Status and prospect

Cellulose, a linear biopolymer, is present naturally in all plants. Apart from being the planet’s predominant natural polymer, it also offers a variety of features including excellent biocompatibility, lower density, substantial strength and the most beneficial mechanical characteristics, inexpensive in cost. Applying the mechanical or chemical techniques, cellulosic materials are transformed into cellulose nanofibres (CNFs) and even cellulose nanocrystals (CNCs). These CNFs and CNCs exhibit excellent capabilities in comparison with native cellulose fibre. Nowadays, nanocellulose is being used in a variety of practical applications such as product packaging, papers as well as paperboard, food sector, healthcare, hygiene products, paints, skin care products and sensors. The current review article summarizes the cellulose, processing methods for nanocellulose, techniques used for chemical modification of cellulose surface and consequently its application as reinforcement in polymeric materials. This article also provides a comprehensive discussion of the historical development in the area of nanocellulose.     

Influence of drying method on the material properties of nanocellulose I: thermostability and crystallinity

The effect of drying method on selected material properties of nanocellulose was investigated. Samples of nanofibrillated cellulose (NFC) and cellulose nanocrystals (CNC) were each subjected to four separate drying methods: air-drying, freeze-drying, spray-drying, and supercritical-drying. The thermal stability and crystallinity of the dried nanocellulose were evaluated using thermogravimetric analysis (TGA) and X-ray diffraction. Supercritical-drying produced NFCs with the least thermal stability and the lowest crystallinity index. Air-drying or spray-drying produced NFCs which were more thermally stable compared with freeze-dried NFCs. The CNCs dried by the three methods (air-drying, freeze-drying, and spray-drying) have similar onset temperature of thermal degradation. The different drying methods resulted in various char weight percentages at 600 °C for the dried NFCs or CNCs from TGA measurements. The dried NFCs are pure cellulose I while the dried CNCs consist of cellulose I and II. The calculated crystallinity indices differ with each drying method. The cellulose II content in CNCs changes as a function of drying method. For the application of nanocellulose in non polar thermoplastics, spray-dried products are recommended according to their higher thermal stability and higher crystallinity index.     

Nanocellulose as a green and sustainable emerging material in energy applications: a review

In this review, a recent prospect on application of nanocellulose in energy application has been highlighted. To achieve high capacities that are essential for effective extraction of interesting ions and for faster charging and discharging in the energy storage devices, nanocellulose in the conducting matrix must obviously assist the dual purpose of mechanically improving and reinforcing the specific charge capacity. The abundant number of nanocellulose hydroxyl groups on the surface favors the formation of hydrogen bonding in an ordered structure and lead to it having high strength and stiffness properties at low density. This brought up the idea of utilizing nanocellulose as a reinforcement and energy adsorption agent originating from the possibility of exploiting the high strength and stiffness of cellulose crystals in composite applications. Copyright © 2017 John Wiley & Sons, Ltd.     

High-performance natural rubber nanocomposites with marine biomass (tunicate cellulose)

Due to the importance in economic and environmental benefits, marine biomass has gained increasing attention in recent years. In this work, marine biomass-based materials were prepared and characterized. Highly reinforcing cellulose nanocrystals (CNCs) with length of 1–2 μm and aspect ratio of ~75 were extracted from tunicates (t-CNCs), and CNCs with length of 100–300 nm and aspect ratio of ~15 from cotton (c-CNCs) were presented for comparison. In order to enhance interfacial interactions between CNCs and rubber, modification of natural rubber (NR) was conducted via epoxidation reaction to obtain epoxidized NR (ENR). Fully bio-based rubber nanocomposites were produced by latex mixing. Compared with NR nanocomposites, hydrogen bonding formed between ENR and CNCs, which led to homogeneous dispersion of CNCs and enhanced interfacial adhesion between them. Moreover, t-CNCs with longer length and larger aspect ratio facilitate filler entanglements, which led to higher reinforcing efficiency. Consequently, both hydrogen bonding and filler entanglements contributed to the improved mechanical properties of ENR/t-CNCs nanocomposites.     

Hydrogen bonding interactions between adsorbed polymer molecules and crystal surface of acetaminophen

The objective of this work was to investigate whether or not the hydrogen bonding interaction between polymer and crystal surface can be detected by the etching pattern changes in the presence of polymers. The (010) face of acetaminophen single crystal was used as a model solid surface. The etching patterns on the (010) face of acetaminophen crystal by water are in the directions of a- and c-axes, which are the same as the directions of the dominant attachment energies on the (010) face. In the presence of polymer, the hydrogen bonding interactions between adsorbed polymer and crystal surface can affect surface diffusion of acetaminophen molecules and change the etching patterns in the direction of a-axis, i.e., the direction of one hydrogen bond chain. Studies with 2-hydroxyethyl cellulose (HEC), hydroxypropyl cellulose (HPC), hydroxypropyl methylcellulose (HPMC) and poly(vinyl alcohol) (PVA) showed that polymers, which can form hydrogen bonds with acetaminophen crystal surface, can change etching patterns in the direction of a-axis. Study with Dextran suggested that if a polymer cannot form hydrogen bonds with crystal surface due to steric repulsion, it will not change the etching pattern in the direction of a-axis. Studies with poly(ethylene glycol) (PEG) and poly(propylene glycol) (PPG) further confirmed that only if a polymer can form hydrogen bonds with acetaminophen on crystal surface, the etching patterns in the direction of a-axis will be affected. The study results suggest that in the presence of polymers, the etching pattern change in the direction of hydrogen bond chain, the a-axis of acetaminophen crystals, can be used to indicate the existence of the hydrogen bonding interactions between adsorbed polymers and acetaminophen crystal surface.     

Sorption of poly(hexamethylenebiguanide) on cellulose: mechanism of binding and molecular recognition

Antimicrobial agents such as poly(hexamethylene biguanide) (PHMB) find application in medical, apparel, and household textile sectors; although it is understood that certain concentrations need to be applied to achieve suitable performance, there has been very little work published concerning the interactions of the polymer and its adsorption mechanism on cellulose. In this paper, such physical chemistry parameters are examined and related to computational chemistry studies. Adsorption isotherms were constructed: at low concentrations, these were typical Langmuir isotherms; at higher concentrations, they were more indicative of Freundlich isotherms, attributed to a combination of electrostatic and hydrogen-bonding forces, which endorsed computational chemistry proposals. At lower concentrations, electrostatic interactions between PHMB and carboxylic acid groups in the cellulose dominate with a contribution to binding through hydrogen bonding; as the concentration of PHMB increases, hydrogen bonding with cellulose becomes increasingly dominant. At high PHMB concentrations, observations of increasing PHMB adsorption are attributed to monolayer aggregation and multilayer stacking of PHMB through electrostatic interactions with counterions and hydrogen bonding of biguanide groups.     

Spectroscopic investigation of the adsorption mechanisms of polyacrylamide polymers onto iron oxide particles

The mechanisms of high-molecular-weight polyacrylamide nonionic homopolymer and 25 mol% anionic acrylate-substituted copolymer adsorption onto iron oxide particles were investigated via DRIFT and UV-vis spectroscopies at three pH values (6, 8.5, and 11). While electrostatic interactions play an important role in charged polymer adsorption, this information is not spectroscopically available. At pH values above and below pH 8.5 (the isoelectric point for the anionic polymer), bidentate chelation and hydrogen bonding were the main adsorption mechanisms. At the isoelectric point, monodentate chelation was observed to be the main mode of adsorption, along with hydrogen bonding. For the nonionic polymer, in all cases, hydrogen bonding through the carbonyl group was the main mode of adsorption. The adsorption of both polymers conformed well to the Freundlich model, suggesting that the adsorbed polymer amount increases with increasing polymer concentration up to 7500 g/t solid, rather than approaching monolayer coverage. Spectroscopic evidence was found to suggest that hydrolysis of nonionic polyacrylamide occurs at high pH.     

Adsorption/aggregation of surfactants and their mixtures at solid-liquid interfaces

Adsorption of surfactants and polymers at solid-liquid interfaces is used widely to modify interfacial properties in a variety of industrial processes such as flotation, ceramic processing, flocculation/dispersion, personal care product formulation and enhanced oil recovery. The behavior of surfactants and polymers at interfaces is determined by a number of forces, including electrostatic attraction, covalent bonding, hydrogen bonding, hydrophobic bonding, and solvation and desolvation of various species. The extent and type of the forces involved varies depending on the adsorbate and the adsorbent, and also the composition and other characteristics of the solvent and dissolved components in it. The influence of such forces on the adsorption behavior is reviewed here from a thermodynamics point of view. The experimental results from microcalorimetric and spectroscopic studies of adsorbed layers of different surfactant and polymer systems at solid-liquid interfaces are also presented. Calorimetric data from the adsorption of an anionic surfactant, sodium octylbenzenesulfonate, and a non-ionic surfactant, dodecyloxyheptaethoxyethylalcohol, and their mixtures on alumina, yielded important thermodynamic information. It was found that the adsorption of anionic surfactants alone on alumina was initially highly exothermic due to the electrostatic interaction with the substrate. Further adsorption leading to a solloid (hemimicelle) formation is proposed to be mainly an entropy-driven process. The entropy effect was found to be more pronounced for the adsorption of anionic-non-ionic surfactant mixtures than for the anionic surfactant alone. Fluorescence studies using a pyrene probe on an adsorbed surfactant and polymer layers, along with electron spin resonance (ESR) spectroscopy, reveal the role of surface aggregation and the conformation of the adsorbed molecules in controlling the dispersion and wettability of the system.     

Mechanically reinforced chitosan/cellulose nanocrystals composites with good transparency and biocompatibility

Chitosan/cellulose nanocrystals(CS/CNCs) composites were prepared with different contents of CNCs. Due to the homogeneous dispersion of CNCs and the strong interfacial interactions resulting from hydrogen bonding between CS chains and CNCs, the transparency of CS is well retained and the overall mechanical properties of CS are significantly improved. Furthermore, because both CS and CNCs are biocompatible materials, cell proliferation test shows that the obtained composites are noncytotoxic and can potentially meet safety requirements of biomedical applications. These advantages pave the way of potential applications of CS in the field of commercial plastics and encourage the use of CS as environmentfriendly material and biomedical material.     

Adsorption and conformation of carboxymethyl cellulose at solid-liquid interfaces using spectroscopic, AFM and allied techniques

Carboxymethyl cellulose (CMC) is a polysaccharide which is widely used in many industrial sectors including food, textiles, paper, adhesives, paints, pharmaceutics, cosmetics and mineral processing. It is a natural organic polymer that is non-toxic and biodegradable. These properties make it ideal for industrial applications. However, a general lack of understanding of the interaction mechanism between the polysaccharides and solid surfaces has hindered the application of this polymer. In this work, adsorption of CMC at the solid-liquid interface is investigated using adsorption and electrophoretic mobility measurements, FTIR, fluorescence spectroscopy, AFM and molecular modeling. CMC adsorption on talc was found to be affected significantly by changes in solution conditions such as pH and ionic strength, which indicates the important role of electrostatic force in adsorption. The pH effect on adsorption was further proven by AFM imaging. Electrokinetic studies showed that the adsorption of CMC on talc changed its isoelectric point. Further, molecular modeling suggests a helical structure of CMC in solution while it is found to adsorb flat on the solid surface to allow its OH groups to be in contact with the surface. Fluorescence spectroscopy studies conducted to investigate the role of hydrophobic bonding using pyrene probe showed no evidence of the formation of hydrophobic domains at talc-aqueous interface. Urea, a hydrogen bond breaker, markedly reduced the adsorption of CMC on talc, supports hydrogen bonding as an important factor. In FTIR study, the changes to the infrared bands, associated with the CO stretch coupled to the CC stretch and OH deformation, were significant and this further supports the strong hydrogen bonding of CMC to the solid surface. In addition, Langmuir modeling of the adsorption isotherm suggests hydrogen bonding to be a dominant force for polysaccharide adsorption since the adsorption free energy of this polymer was close to that for hydrogen bond formation. All of the above results suggest that the main driving forces for CMC adsorption on talc are a combination of electrostatic interaction and hydrogen bonding rather than hydrophobic force.     

Mechanisms of ethyl(hydroxyethyl) cellulose-solid interaction: influence of hydrophobic modification

Hydroxyethyl cellulose and its hydrophobically modified derivatives are widely used in many industrial areas such as pharmaceuticals, cosmetics, textiles, paint and mineral industries. However, the interaction mechanisms of these biopolymers and solids have not been established. In this work, the interaction mechanism and conformation of hydrophobically modified ethyl(hydroxyethyl) cellulose (C(14)-EHEC) have been investigated using spectroscopic, AFM and allied techniques. Comparison was made with corresponding unmodified analogue in order to investigate the effects of the hydrophobic modification. Electrokinetic studies showed that polysaccharides adsorption decreased the negative zeta potential of talc but did not reverse the charge. EHEC adsorption on talc was not found to be affected significantly by changes in solution conditions such as pH and ionic strength, ruling out electrostatic force as the controlling factor. However, HM-EHEC adsorption was found to increase markedly with increase in ionic strength from 0.1 to 1 suggesting a role for the hydrophobic force in this adsorption process. Fluorescence spectroscopic studies conducted to investigate the role of hydrophobic bonding using pyrene probe showed no evidence of the formation of hydrophobic domains at talc-aqueous interface. Urea, a hydrogen bond breaker, reduced the adsorption of HM-EHEC on talc markedly. In FTIR study, the changes in the infrared bands, associated with the CO stretch coupled to the CC stretch and OH deformation, were significant and therefore support strong hydrogen bonding of HM-EHEC on the solid surface. Moreover, Langmuir modeling of the adsorption isotherms suggests hydrogen bonding to be a major force for the adsorption of EHEC and C(14)-EHEC on solid since the adsorption free energies of these polymers were close to that for hydrogen bond formation. All of the above results suggest that the main driving force for EHEC adsorption on talc is hydrogen bonding rather than electrostatic interaction or hydrophobic force. For hydrophobically modified C(14)-EHEC, hydrophobic force plays a synergetic role in adsorption along with hydrogen bonding. From computer modeling and AFM imaging, it is proposed that C(0)-EHEC and C(14)-EHEC adsorb flat on talc with ethylene oxide side chains and hydrophobic groups protruding out from the surface into bulk water phase.     

Halogen bonding in polymer science: towards new smart materials

The halogen bond is a special non-covalent interaction, which can represent a powerful tool in supramolecular chemistry. Although the halogen bond offers several advantages compared to the related hydrogen bond, it is currently still underrepresented in polymer science. The structural related hydrogen bonding assumes a leading position in polymer materials containing supramolecular interactions, clearly indicating the high potential of using halogen bonding for the design of polymeric materials. The current developments regarding halogen bonding containing polymers include self-assembly, photo-responsive materials, self-healing materials and others. These aspects are highlighted in the present perspective. Furthermore, a perspective on the future of this rising young research field is provided.

The incorporation of halogen bonding into polymer architectures is a new approach for the design of functional materials. This perspective emphasizes the current development in the field of halogen bonding featuring polymer materials.     

Routes to Hydrogen Bonding Chain‐End Functionalized Polymers

The contribution of supramolecular chemistry to polymer science opens new perspectives for the design of polymer materials exhibiting valuable properties and easier processability due to the dynamic nature of non‐covalent interactions. Hydrogen bonding polymers can be used as supramolecular units for yielding larger assemblies that possess attractive features, arising from the combination of polymer properties and the responsiveness of hydrogen bonds. The post‐polymerization modification of reactive end‐groups is the most common procedure for generating such polymers. Examples of polymerizations mediated by hydrogen bonding‐functionalized precursors have also recently been reported. This contribution reviews the current synthetic routes toward hydrogen bonding sticker chain‐end functionalized polymers.     

Functionalization of nanofibrillated cellulose with silver nanoclusters: fluorescence and antibacterial activity

Native cellulose nanofibers are functionalized using luminescent metal nanoclusters to form a novel type of functional nanocellulose/nanocluster composite. Previously, various types of cellulose fibers have been functionalized with large, non-luminescent metal nanoparticles. Here, mechanically strong native cellulose nanofibers, also called nanofibrillatedcellulose (NFC), microfibrillatedcellulose (MFC) ornanocellulose, disintegrated from macroscopic cellulose pulp fibers are used as support for small and fluorescent silver nanoclusters. The functionalization occurs in a supramolecular manner, mediated by poly(methacrylic acid) that protects nanoclusters while it allows hydrogen bonding with cellulose, leading to composites with fluorescence and antibacterial activity.     

Cellulose nanocrystals from lignocellulosic feedstock: a review of production technology and surface chemistry modification

Fossil fuel substitutes are being developed to combat the ecological impact and rapid exhaustion of petroleum-based products. Being the most abundant polymer on Earth, cellulose-based products are renewable and sustainable. Cellulose nanocrystals (CNCs) are derived from cellulosic-based materials, have good physicochemical properties, and can be used to produce numerous products. CNC synthesis and their applications have been extensively studied; however, they remain limited to laboratory-scale as several challenges hinder its commercial-scale production. Herein, the suitability of nanocrystalline isolation methods, including chemical, enzymatic, ionic liquids, and deep eutectic solvents, for mass production is evaluated. Poor re-dispersion of CNCs is a major challenge that hinders its utilization in many applications. Hence, surface chemistry modification of CNCs have also been reviewed. It has been concluded that the CNC isolation method and surface modification technique significantly impacts its cost, morphology, and physicochemical properties. This review paper presents the challenges often faced in the conversion of bench-scale studies into commercial production of nanocrystalline cellulose. Hence, this paper gives all the necessary information on the important aspects of raw material selection, nanocellulose isolation process selection, and suitable surface modification method together in a single review article. Readers will be able to identify the possible research gaps for future research studies.

     

Isolation of a novel,crystalline cellulose material from the spent liquor of cellulose nanocrystals (CNCs)

We have modified the standard sulphuric acid hydrolysis method for the production of cellulose nanocrystals (CNCs) to successfully isolate a novel, highly crystalline cellulose material from the spent liquor of CNCs. The novel material has a cellulose II crystal structure that is distinctly different from the cellulose I crystal structure of CNCs. The modified method uses a shorter time for the hydrolysis, followed by maintaining a high residual acid concentration for the separation of the spent liquor and CNCs, and by adding the spent liquor to water. The modified method offers an opportunity to concurrently produce CNCs in up to ~40 % yield and the novel, highly crystalline, sulphated cellulose II in ~15 % yield in separate and pure forms from sulphuric acid hydrolysis of a commercial northern bleached softwood kraft pulp. It can potentially reduce the production cost of CNCs, allow easier downstream processing of CNCs and recovery of sulphuric acid, and generate a new cellulose bio-material for product development.     

Electrokinetic Investigations of Oriented Cellulose Polymers

Summary: Electrokinetic investigations of different cellulosic fibres were reviewed with special emphasis on polymer composite materials and textile applications of cellulose fibres. The possibilities in the interpretation of zeta-potential data regarding chemical and physical modification, specific adsorption, swelling and changes in hydrophobicity/hydrophilicity of cellulose polymers are discussed. Using recent data from literature, advantages and limitations of electrokinetic measurements of oriented polymers are described, finding that the zeta-potential is a valuable parameter in polymer surface characterisation.     

Kinetics of copper dissolving in the water solution of polyacrylic acid or its copolymers with acrylonitrile and hydrogen peroxide

During the coating of metal plates by carboxyl-containing polymers from their solutions or dispersions, adsorption of the polymer onto the surface and oxidation of the metal by oxygen take place. Adsorption of polyacrylic acid and its copolymers with acrylonitrile at the copper surface and kinetics of copper dissolving in the presence of carboxyl-containing polymers and hydrogen peroxide have been investigated. The adsorption of polymers at the surface of the copper powder passes through a maximum when the content of acrylonitrile in copolymers rises. The rate at which copper dissolves increases with increased polymer concentration in solution, reaching a constant value, and does not depend on the hydrogen peroxide concentration. The rate at which copper dissolves depends on the rate of copper oxidation by hydrogen peroxide in the adsorption layer and the rate of polymer desorption. The increase of the solution pH leads to a decrease in the adsorption of polyacrylic acid at the copper surface and the rate at which copper dissolves in the presence of hydrogen peroxide.     

Structure of water incorporated in amphoteric polymer thin films as revealed by FT-IR spectroscopy

The structure and hydrogen bonding of water incorporated in a thin film of amphoteric terpolymers composed of various ratios of MA, DMAPMA, and BMA were analyzed using the band shapes of the O--H stretching in the IR spectra. At an early stage of sorption of water, the IR spectrum for the water incorporated in the film with comparative contents of MA and DMAPMA residues was similar to that for free water. This is consistent with the tendency for zwitterionic polymers, but is in contrast with the drastic change in the IR spectrum of water incorporated in non-ionic polymer films such as polyBMA. These results suggest a correlation between the mildness of the charge-balanced polymers to the structure of incorporated water and their blood compatibilities.