Facile synthesis and performance of polypyrrole-coated sulfur nanocomposite as cathode materials for lithium/sulfur batteries

In situ chemical oxidation polymerization of pyrrole on the surface of sulfur particles was carried out to synthesize a sulfur/polypyrrole （SIPPy） nanocomposite with core-shell structure. The composite was characterized by elemental analysis, X-ray diffraction, scanning/transmission electron microscopy, and electrochemical measurements. XRD and FTIR results showed that sulfur well dispersed in the core-shell structure and PPy structure was successfully obtained via in situ oxidative polymerization of pyrrole on the surface of sulfur particles. TEM observation revealed that PPy was formed and fixed to the surface of sulfur nanoparticle after polymerization, developing a well-defined core-shell structure and the thickness of PPy coating layer was in the range of 20-30 nm. In the composite, PPy worked as a conducting matrix as well as a coating agent, which confined the active materials within the electrode. Consequently, the as prepared SIPPy composite cathode exhibited good cycling and rate performances for rechargeable lithium/sulfur batteries. The resulting cell containing SIPPy composite cathode yields a discharge capacity of 1039 mAh·g^-1 at the initial cycle and retains 59% of this value over 50 cycles at 0.1 C rate. At 1 C rate, the SIPPy composite showed good cycle stability, and the discharge capacity was 475 mAh·g^-1 after 50 cycles.     

A nanoporous nitrogen-doped graphene for high performance lithium sulfur batteries

A nanoporous N-doped reduced graphene oxide (p-N-rGO) was prepared through carbothermal reaction between graphene oxide and ammonium-containing oxometalates as sulfur host for Li-S batteries. The p-N-rGO sheets have abundant nanopores with diameters of 10-40 nm and the nitrogen content is 2.65 at%. When used as sulfur cathode, the obtained p-N-rGO/S composite has a high reversible capacity of 1110 mAh g^-1 at 1C rate and stable cycling performance with 781.8 mAh g^-1 retained after 110 cycles, much better than those of the rGO/S composite. The enhanced electrochemical performance is ascribed to the rational combination of nanopores and N-doping, which provide efficient contact and wetting with the electrolyte, accommodate volume expansion and immobilize polysulfides during cycling.     

Bimetal-organic frameworks derived Co/N-doped carbons for lithium-sulfur batteries

Lithium-sulfur (Li-S) batteries have received extensive attention due to their high theoretical specific energy density. However, the utilization of sulfur is seriously reduced by the shuttle effect of lithium polysulfides and the low conductivity of sulfur and lithium sulfide (Li₂S). Herein, we introduced bimetal-organic frameworks (Co/Zn-ZIF) derived cobalt and nitrogen-doped carbons (Co/N-C) into Li-S batteries through host design and separator modification. The Co/N-C in Li-S batteries effectively limits the shuttle effect through simultaneously serving as polysulfide traps and chemical catalyst. As a result, the Li-S batteries deliver a high reversible capacity of 1614.5 mAh/g and superior long-term cycling stability with a negligible capacity decay of only 0.04% per cycle after 1000 cycles. Furthermore, they have a high area capacity of 5.5 mAh/cm².     

Porous V2O5-SnO2/CNTs composites as high performance cathode materials for lithium-ion batteries

Vanadium pentoxide (V₂O₅) exhibits high theoretical capacities when used as a cathode in lithium ion batteries (LIBs), but its application is limited by its structural instability as well as its low lithium and electronic conductivities. A porous composite of V₂O₅-SnO₂/carbon nanotubes (CNTs) was prepared by a hydrothermal method and followed by thermal treatment. The small particles of V₂O₅, their porous structure and the coexistence of SnO₂ and CNTs can all facilitate the diffusion rates of the electrons and lithium ions. Electrochemical impedance spectra indicated higher ionic and electric conductivities, as compared to commercial V₂O₅. The V₂O₅-SnO₂/CNTs composite gave a reversible discharge capacity of 198 mAh·g^?1 at the voltage range of 2.05–4.0 V, measured at a current rate of 200 mA·g^?1, while that of the commercial V₂O₅ was only 88 mAh·g^?1, demonstrating that the porous V₂O₅-SnO₂/CNTs composite is a promising candidate for high-performance lithium secondary batteries.     

Porous carbon framework nested nickel foam as freestanding host for high energy lithium sulfur batteries

Constructing 3 D multifunctional conductive framework as stable sulfur cathode contributes to develop advanced lithium-sulfur(Li-S) batteries.Herein,a freestanding electrode with nickel foam framework and nitrogen doped porous carbon(PC) network is presented to encapsulate active sulfur for Li-S batteries.In such a mutually embedded architecture with high stability,the interconnected carbon network and nickel foam matrix can expedite ionic/electro nic tra nsport and sustain volume variations of sulfur.Furthermore,rationally designed porous structures provide sufficient internal space and large surface area for high active sulfur loading and polar polysulfides anchoring.Benefiting from the synergistic superiority,the Ni/PC-S cathode exhibits a high initial capacity of around 1200 mAh/g at 0.2 C,excelle nt rate perfo rmance,and high cycling stability with a low decay rate of 0.059% per cycle after 500 cycles.This work provides a useful strategy to exploit freestanding porous framework for diverse applications.     

Hydrothermal synthesis of spindle-like Li2FeSiO4-C composite as cathode materials for lithium-ion batteries

In this paper,we report on the preparation of Li_2FeSiO_4,sintered Li_2FeSiO_4,and Li_2FeSiO_4-C composite with spindle-like morphologies and their application as cathode materials of lithium-ion batteries.Spindle-like Li2FeSi04 was synthesized by a facile hydrothermal method with(NH_4)_2Fe(SO_4)_2 as the iron source.The spindle-like Li_2FeSiO_4 was sintered at 600 ℃ for 6 h in Ar atmosphere.Li_2FeSiO_4-C composite was obtained by the hydrothermal treatment of spindle-like Li_2FeSiO_4 in glucose solution at 190 ℃ for 3 h.Electrochemical measurements show that after carbon coating,the electrode performances such as discharge capacity and high-rate capability are greatly enhanced.In particular.Li_2FeSiO_4-C with carbon content of 7.21 wt%delivers the discharge capacities of 160.9 mAh·g~(-1) at room temperature and 213 mAh·g~(-1) at45℃(0.1 C),revealing the potential application in lithium-ion batteries.     

Electroactive organic anion‐doped polypyrrole as a low cost and renewable cathode for sodium‐ion batteries

We demonstrate here a remarkable electrochemical activation of polypyrrole chains by doping with redox‐active diphenylamine sulfonate anions. The organic redox dopant can not only serve as anionic counterions to enhance electrochemical activity of the polymer chains, but also contributes their redox capacity to the material. This organic‐polymer composite exhibits a quite high reversible capacity of 115 mA h g^?1, excellent rate capability and cycling stability, capable of serving as a low cost, and renewable cathode for Na‐ion batteries. Since the chemical doping method is simple and easily extendable for a large variety of organic anions and polymer networks, it is possible to adopt this new strategy for creating low cost and electrochemically active polymer materials for widespread electric storage applications. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

锂硫电池复合正极研究进展

锂硫电池因其超高的理论能量密度被视为极具前景的下一代电化学储能体系,其中高比容量的硫正极提供了锂硫电池的能量密度优势并直接决定了电池的实际性能。经过数十年的发展,最具前景的硫正极体系分别是硫碳复合（S/C）正极和硫化聚丙烯腈（SPAN）正极。本文系统综述了S/C正极和SPAN正极的最新研究进展。首先,简要介绍了两种正极的工作原理并进行了比较。S/C正极发生固-液-固多相转化反应,充放电表现为双平台特征。与之相比,SPAN正极发生固-固反应,充放电曲线为单平台。然后,对两种正极所面临的挑战和目前报道的优化策略进行了系统的分析与讨论。对于S/C正极,主要调控策略包括电极结构修饰、电催化剂设计与辅助氧化还原介体调控;对于SPAN正极,主要调控策略包括电极结构设计、电极形貌调控、杂原子掺杂和外源性氧化还原介体调控。最后,在电池尺度上对S/C正极和SPAN正极进行了综合比较,并对基于S/C正极和SPAN正极的锂硫电池在未来所面对的机遇与挑战进行了展望。     

锂离子电池锡基复合氧化物负极材料的研究

采用共沉淀法制备了SnSbO2.5和SnGeO3两种锡基复合氧化物粉末.XRD分析表明,这两种锡基复合氧化物的共同特点是在27°～28°处有波峰,属无定型结构.将其分别作为锂离子电池负极材料的活性物质,利用恒电流电池测试仪研究它们的电化学性能.实验表明,这两种锡基复合氧化物都有较高的电化学容量,SnSbO2.5的可逆容量为1200mA·h/g,SnGeO3的可逆容量为750mA·h/g.这两种锡基复合氧化物的电化学容量远高于碳材料(石墨的理论容量为372mA·h/g),因此,这两种锡基复合氧化物可以作为锂离子电池负极材料的候选材料.     

The effect of milling on the performance of a Mo6S8 Chevrel phase as a cathode material for rechargeable Mg batteries

In the present study, we explored how milling Mo₆S₈ Chevrel phase in inert or air atmosphere affects their electrochemical behavior as a Mg-ion insertion material for rechargeable Mg batteries. Electrochemical tools such as slow scan rate cyclic voltammograms and potentiostatic intermittent titration technique have been used in conjunction with X-ray diffraction, X-ray photoelectron spectroscopy, and electron microscopy. In contrast to the deterioration observed for milling Mo₆S₈ in air, its milling under Ar results in specific capacity increase due to improved Mg-ion diffusion kinetics. It was shown that in spite of the conservation of the bulk crystallographic structure, both for air and the Ar-milled materials, they differ significantly in the average particle sizes and the degree of surface oxidation state.Dedicated to Prof. G. Horanyi on the occasion of his 70th birthday     

A feasibility study on the use of Li(4)V(3)O(8) as a high capacity cathode material for lithium-ion batteries

Li(4)V(3)O(8) materials have been prepared by chemical lithiation by Li(2)S of spherical Li(1.1)V(3)O(8) precursor materials obtained by a spray-drying technique. The over-lithiated vanadates were characterised physically by using scanning electron microscopy (SEM) and X-ray diffraction (XRD), and electrochemically using galvanostatic charge-discharge and cyclic voltammetry measurements in both the half-cell (vs. Li metal) and full-cell (vs. graphite) systems. The Li(4)V(3)O(8) materials are stable in air for up to 5 h, with almost no capacity drop for the samples stored under air. However, prolonged exposure to air will severely change the composition of the Li(4)V(3)O(8) materials, resulting in both Li(1.1)V(3)O(8) and Li(2)CO(3). The electrochemical performance of these over-lithiated vanadates was found to be very sensitive to the conductive additive (carbon black) content in the cathode. When sufficient carbon black is added, the Li(4)V(3)O(8) cathode exhibits good cycling behaviour and excellent rate capabilities, matching those of the Li(1.1)V(3)O(8) precursor material, that is, retaining an average charge capacity of 205 mAh g(-1) at 2800 mA g(-1) (8C rate; 1C rate means full charge or discharge of a battery in one hour), when cycled in the potential range of 2.0-4.0 V versus Li metal. When applied in a non-optimised full cell system (vs. graphite), the Li(4)V(3)O(8) cathode showed promising cycling behaviour, retaining a charge capacity (Li(+) extraction) above 130 mAh g(-1) beyond 50 cycles, when cycled in the voltage range of 1.6-4.0 V, at a specific current of 117 mA g(-1) (C/3 rate).