高压相BeO晶体的电子结构和光学性质

应用基于密度泛函理论的第一性原理研究方法,考虑广义梯度近似(GGA)下的交换关联势,模拟计算了高压下纤维锌矿(WZ)、闪锌矿(ZB)和岩盐(RS)结构氧化铍(BeO)晶体的电子结构和光学性质等.计算结果表明,随着压力的增加,同种结构下原子间的键长和电荷转移有所减小,并且价带和导带分别向低能和高能方向移动,禁带展宽.与常压下的BeO相比,随着压力的增加,三种结构的BeO晶体的光学性质有一定的变化,介电函数、吸收系数、折射率以及电子能量损失谱曲线出现更多的精细结构,峰的数量增多;各高压相结构的吸收谱和能量损失谱宽度逐次展宽;吸收系数曲线的吸收峰及其位于低能区域的吸收边以及电子能量损失谱峰的位置均发生一定程度的蓝移.     

Charge Separation in Wurtzite/Zinc‐Blende Heterojunction GaN Nanowires

The electronic properties of wurtzite/zinc‐blende (WZ/ZB) heterojunction GaN are investigated using first‐principles methods. A small component of ZB stacking formed along the growth direction in the WZ GaN nanowires does not show a significant effect on the electronic property, whereas a charge separation of electrons and holes occurs along the directions perpendicular to the growth direction in the ZB stacking. The later case provides an efficient way to separate the charge through controlling crystal structure. These results have significant implications for most state of the art excitonic solar cells and the tuning region in tunable laser diodes.     

Thermally controlled cyclic insertion/ejection of dopant ions and reversible zinc blende/wurtzite phase changes in ZnS nanostructures

We report a reversible phase transformation of platelet-shaped ZnS nanostructures between wurtzite (WZ) and zinc blende (ZB) phases by reversible insertion/ejection of dopant Mn(II) ions induced by a thermocyclic process. In a reaction flask loaded with WZ ZnS platelets and Mn molecular precursors, during heating Mn ions are incorporated and change the phase of the host nanostructures to ZB; during cooling Mn ions are spontaneously ejected, returning the host nanoplatelets to the original WZ phase. These reversible changes are monitored for several cycles with PL, EPR, XRD, and HRTEM. Interestingly, the (0001) WZ platelets transform to (110) ZB following a nucleation and growth process triggered by a local increase/depletion of the Mn(2+) concentration in the nanocrystals.     

MnS hierarchical hollow spheres with novel shell structure

High yields of MnS microspheres with novel hierarchical structure were prepared through a simple solution method. Field emission scanning electron microscopy and transmission electron microscopy analyses reveal that the microsphere has a core-shell structure: the interior hollow sphere is covered by a shell consisting of nanorod arrays. Interestingly, the nanorod is a wurtzite (WZ)/zinc blende (ZB) phase admixture with a large amount of stacking faults/twins. The alternation of WZ and ZB along the growth direction of the nanorod enables it to exhibit the features of a quantum well. Furthermore, the WZ/ZB admixture structure could also be regarded as a type II homomaterial heterostructure. All these features imply that the novel core-shell structure has great potential for applications, among them the quantum well photoelectrical and heterostructure photoconduction fields.     

Formation and Structure Characterization of Flower-like ZnS Microspheres

ZnS nanophases were synthesized through a low-temperature route using a mixed solvent, diethylenetriamine （DETA） and deionized water （DIW）, as the reaction medium. The assynthesized products were characterized by X-ray diffraction （XRD）, scanning electron microscopy （SEM）, transmission electron microscopy （TEM） and high-resolution transmission electron microscopy （HRTEM）. The experimental results indicate that ZnS nanophase is formed through a phase evolution of ZnS·（DETA）1/2→ ZnS.DETA→ZnS. The ZnS flower-like microspheres sized around 2μm consist of many nanobelts whose structure could be regarded as an alternative admixture of hexagonal wurtzite （WZ） and cubic zinc blende （ZB）. The optical absorption measurements demonstrate that the spectral feature of the sample changes with the evolution of the phase structure.     

Size- and shape-dependent phase transformations in wurtzite ZnS nanostructures

This paper describes the equilibrium morphologies of zinc sulfide nanoparticles in the wurtzite phase as a function of size, determined using ab initio Density Functional Theory (DFT) simulations and a shape-dependent thermodynamic model predicting the Gibbs free energy of a nanoparticle. We investigate the relative stabilities of a variety of nanoparticle shapes based on the wurtzite structure and show how the aspect ratio of wurtzite nanorods moderates the size-dependent phase transformation to the zinc blende phase. We find that while wurtzite nanoparticles are thermodynamically unstable with respect to the low energy rhombic dodecahedron morphology in the zinc blende phase at all sizes, shape- and size-dependent phase transformations occur when other zinc blende morphologies are present. Despite popular synthesis of zinc sulphide nanoparticles in the wurtzite phase, an in-depth thermodynamic study relating to the relative stability of wurtzite shapes and comparison with the zinc blende phase does not exist. Therefore this is the first thermodynamic study describing how shape can determine the solid phase of zinc sulfide nanostructures, which will be of critical importance to experimental applications of nanostructured zinc sulfide, where phase and shape determines properties.     

Structural properties and phase transformations under pressure of XTe compounds (X = Be,Mg, and Ca): The role of the exchange–correlation potential

We have performed first principles total energy calculations to investigate the structural properties and possible phase transitions under pressure of IIA–VI compounds: BeTe, MgTe and CaTe. We have considered the following possible structures: rock-salt, nickel arsenide, cesium chloride, zinc-blende, and in some cases wurtzite. Calculations are done using the periodic density functional theory. We employ the full potential linearized augmented plane wave method as implemented in the wien2k code. The exchange and correlation potential energies are treated according to the generalized gradient approximation (GGA) using the Perdew, Burke, Ernzerhof (PBE) parameterization, and the local density approximation (LDA). Our results show that the GGA calculations correctly predict the ground state structure of all three binary compounds: zinc-blende for BeTe, wurtzite/zinc-blende for MgTe, and rock-salt for CaTe. Under pressure, BeTe and MgTe transform to the nickel arsenide structure, while CaTe transforms from rock-salt to cesium chloride. Slightly different results are found using the LDA approximation. We discuss the role of the ionicity in the difference between the LDA and GGA results.     

CdO及CdxZn1-xO化合物的结构、能量和电子性能分析

采用基于密度泛函理论的第一性原理的平面波超软赝势计算方法, 研究了纤锌矿结构的CdxZn1-xO化合物以及CdO在纤锌矿结构、岩盐结构和闪锌矿结构的基态电子特性和体结构, 分析了CdO的稳定性. 通过对比纤锌矿结构、岩盐结构和闪锌矿结构CdO的内聚能, 发现岩盐结构和纤锌矿结构CdO的稳定性好, 闪锌矿结构相对较差; 通过对CdxZn1-xO化合物在不同Cd组分下的电子结构计算, 得到了较好的禁带宽度拟合结果, 能带弯曲参量B=1.02 eV; 通过形成能与组分关系的分析, 我们认为当Cd的组分x=0.4左右时, CdxZn1-xO化合物最不稳定, 容易出现相分离现象.     

Vibrational and thermodynamic properties of β-HMX: a first-principles investigation

Thermodynamic properties of β-HMX crystal are investigated using the quasi-harmonic approximation and density functional theory within the local density approximation (LDA), generalized gradient approximation (GGA), and GGA + empirical van der Waals (vdW) correction. It is found that GGA well describes the thermal expansion coefficient and heat capacity but fails to produce correct bulk modulus and equilibrium volume. The vdW correction improves the bulk modulus and volume, but worsens the thermal expansion coefficient and heat capacity. In contrast, LDA describes all thermodynamic properties with reasonable accuracy, and overall is a good exchange-correlation functional for β-HMX molecular crystal. The results also demonstrate significant contributions of phonons to the equation of state. The static calculation of equilibrium volume for β-HMX differs from the room-temperature value incorporating lattice vibrations by over 5%. Therefore, for molecular crystals, it is essential to include phonon contributions when calculated equation of state is compared with experimental data at ambient condition.     

Organic phase conversion of bulk (wurtzite) ZnO to nanophase (wurtzite and zinc blende) ZnO

We describe the all-organic phase conversion of bulk commercial ZnO in the wurtzite modification to sub-30 nm ZnO that we find to be partially in the zinc blende [, a=4.568(3) Å] modification. The conversion involves refluxing ZnO in 2,4-pentanedione (acetylacetone) at 413 K to form the zinc 2,4-pentanedionate, which is decomposed by heating at 573 K in an appropriate high-temperature solvent such as dibenzylether to form nanophase ZnO. This nanophase, partially zinc blende ZnO can also be obtained in a single step by heating commercial zinc 2,4-pentanedionate in refluxing dibenzylether. Thermodiffractometry suggests that the conversion of zinc blende ZnO to wurtzite ZnO commences near 650 K.     

Effect of Li and Na impurities on the electronic and magnetic properties of beryllium oxide

The ab initio pseudopotential method (VASP package) within the gradient approximation (GGA) for the exchange-correlation potential is used to study the effect of Li and Na substitution for Be atoms on the electronic and magnetic properties of wurtzite-like beryllium monoxide BeO with an impurity concentration of 0.028. When Li impurity is introduced into BeO, the system is found to remain nonmagnetic. At the same time, the BeO:Na system adopts magnetic moments (~0.8 fu_B per cell) through the spin polarization of the 2p-state of oxygen atoms surrounding the impurity center. After lithium incorporation into BeO, the spectrum of BeO:Li becomes metal-like, while the introduction of sodium results in the magnetic semimetal type of the BeO:Na spectrum     

Alkyl chains of surface ligands affect polytypism of cdse nanocrystals and play an important role in the synthesis of anisotropic nanoheterostructures

We show that the length of the alkyl chain of surface ligands can shift the equilibrium between the wurtzite and zinc blende polytypes of CdSe nanocrystals. In-situ wide-angle X-ray scattering measurements reveal that short-chain (e.g., propyl) phosphonic acids stabilize CdSe nanocrystals with the zinc blende phase whereas octadecylphosphonic acid stabilize nanocrystals with the wurtzite phase. We also demonstrate how this effect can be used to improve the shape selectivity in the synthesis of anisotropic CdSe/CdS and ZnSe/CdS nanoheterostructures.     

Ab initio thermodynamics and phase diagram of solid magnesium: a comparison of the LDA and GGA

The finite temperature density functional theory and quasiharmonic lattice dynamics have been used to compute numerous thermodynamic properties of hexagonal close packed magnesium using both the local density approximation (LDA) and the generalized gradient approximation (GGA) for the exchange-correlation potential. Generally, it is found that there exist only minor differences between the LDA and GGA computed properties, with both giving good agreement with experiment. The hcp-bcc phase boundary has also been computed and is found to be in agreement with experimental observation. Again, only slight differences are found between the LDA and GGA.     

Structural,electronic, elastic,thermodynamic and vibration properties of TbN compound from first principles calculations

We have predicted structural, electronic, elastic, thermodynamic and vibration characteristics of TbN, using density functional theory within generalized-gradient (GGA) apraximation. For the total energy calculation we have used the projected augmented plane-wave (PAW) implementation of the Vienna Ab initio Simulation Package (VASP). We have used to examine structure parameter in eight different structures such as in NaCl (B1), CsCl (B2), ZB (B3), Tetragonal (L1₀), WC (Bh), NiAs (B8), PbO (B10) and Wurtzite (B4). We have performed the thermodynamics properties for TbN by using quasi-harmonic Debye model. We have, also, predicted the temperature and pressure variation of the volume, bulk modulus, thermal expansion coefficient, heat capacities and Debye temperatures in a wide pressure (0–130 GPa) and temperature ranges (0–2000 K). Furthermore, the band structure, phonon dispersion curves and corresponding density of states are computed. Our results are compared to other theoretical and experimental works, and excellent agreement is obtained.     

Elastic, electronic and thermal properties of YSZ from first principles

First principles calculations were performed to investigate the elastic, electronic and thermal properties of 14% cubic yttria-stabilized zirconia (YSZ) using the pseudo potential plane-wave method within the gradient generalized approximation (GGA) for the exchange and correlation potential. Computed lattice constant parameters are in good agreement with the available experimental results. The three independent elastic constants were computed by means of the stress-strain method, indicating that 14% cubic YSZ is a mechanically stable structure. From the knowledge of the elastic constants, a set of related properties, namely bulk, shear modulus, Young’s modulus, sound velocity, Debye temperature, thermal capacity and minimum thermal conductivity are numerically estimated in the frame work of the Voigt-Reuss-Hill approximation for YSZ polycrystalline. The calculated bulk modulus, shear modulus, Young’s modulus, sound velocity, Debye temperature, thermal capacity and minimum thermal conductivity are in reasonable agreement with the available experimental and theory data. Density of states, charge density and Mulliken population analysis show that the 14% cubic YSZ is covalent and possess ionic character.     

Hierarchical CdSe-gold hybrid nanocrystals: synthesis and optical properties

The synthesis of hybrid nanostructures with controlled size, shape, composition and morphology has attracted increasing attention due to the fundamental and applicable interest. Here, we demonstrate the synthesis and optical properties of hierarchical CdSe-Au hybrid nanostructures with zinc blende (ZB) CdSe nanocrystals (NCs). For 3.5 nm ZB CdSe NCs, one Au cluster was deposited on each CdSe NC. Nevertheless, several Au clusters were selectively deposited on the apexes of 5 nm and 8 nm ZB CdSe NCs, resulting from the different reactivity of crystal facets. Furthermore, hierarchical CdSe-Au nanostructures with complex morphology were organized with the isolated CdSe-Au hybrid NCs by the coalescence of Au domains on the CdSe-Au hybrid NCs. UV-Vis spectra revealed a red tail upon the deposition of Au clusters. The chemical joint of Au on CdSe NCs was further confirmed by fluorescence quenching. The optical limiting performance of CdSe-Au hybrid NCs dispersed in toluene was investigated at 532 nm using a Nd:YAG laser with the pulse width of 8 ns.     

The structural,electronic, elastic,vibration and thermodynamic properties of GdMg

We have investigated the structural, elastic, electronic, vibration and thermodynamic properties of GdMg alloy using the methods of density functional theory within the generalized gradient approximation (GGA) for the exchange-correlation functional. We have presented the results on the basic physical parameters, such as the lattice constant, bulk modulus, pressure derivative of bulk modulus with and without spin-polarization (SP), second-order elastic constants, Zener anisotropy factor, Poisson's ratio, Young's modulus, and isotropic shear modulus. The thermodynamic properties of the considered compound are obtained through the quasi-harmonic Debye model. In order to obtain further information, we have also studied the pressure and temperature-dependent behavior of the volume, bulk modulus, thermal expansion coefficient, heat capacity, and Debye temperature in a wide temperature range of 0–1200 K. We have also calculated phonon frequencies and one-phonon density of states for B2 structure of GdMg compound. The temperature-dependent behavior of heat capacity and entropy obtained from phonon density of states for GdMg compound in B2 phase is also presented.     

Theoretical studies of structural and electronic properties of AlnAsn clusters

We present theoretical results of size dependent structural, electronic, and optical properties of ligand‐free stoichiometric Al_nAs_n clusters of zinc‐blende modification. The investigation is done using a simplified parametrized linear combination of atomic orbital–density functional theory‐local density approximation–tight‐binding (LCAO–DFT–LDA–TB) method and consider clusters with n up to around 100. Initial structures have assumed as spherical parts of infinite zinc‐blende structure and then allowed to relax to the closest local‐energy‐minimum structure. We analyze the radial distributions of atoms, Mulliken populations, electronic energy levels (in particular, HOMO and LUMO), bandgap, and stability as a function of size and composition. © 2005 Wiley Periodicals, Inc. Int J Quantum Chem, 2006     

Electronic and mechanical properties of 5d transition metal mononitrides via first principles

The electronic and mechanical properties of 5d transition metal mononitrides from LaN to AuN are systematically investigated by use of the density-functional theory. For each nitride, six structures are considered, i.e., rocksalt, zinc blende, CsCl, wurtzite, NiAs and WC structures. Among the considered structures, rocksalt structure is the most stable for LaN, HfN and AuN, WC structure for TaN, NiAs structure for WN, wurtzite structure for ReN, OsN, IrN and PtN. The most stable structure for each nitride is mechanically stable. The formation enthalpy increases from LaN to AuN. For LaN, HfN and TaN, the formation enthalpy is negative for all the considered structures, while from WN to AuN, except wurtzite structure in ReN, the formation enthalpy is positive. The calculated density of states shows that they are all metallic. ReN in NiAs structure has the largest bulk modulus, 418 GPa. The largest shear modulus 261 GPa is from TaN in WC structure. Trends are discussed.     

Systematic study on structural phase behavior of CdSe thin films

Cadmium selenide (CdSe) thin films were chemically deposited at room temperature, from aqueous ammoniacal solution using Cd(CH(3)COO)(2) as Cd2+ and Na(2)SeSO(3) as Se2- ion sources. The as-deposited films were uniform, well adherent to the glass substrate, specularly reflective, and red-orange in color. The as-deposited CdSe layers grew with nanocrystalline sphalerite cubic structure along with the amorphous phase present in it, with optical band gap E(g) = 2.3 eV. The films were annealed in air atmosphere for 4 h at different temperatures and characterized for compositional, structural, morphological, and optical properties. XRD and SEM studies clearly revealed the systematic phase transformation of CdSe films from metastable nanocrystalline cubic (zinc blende type) to a mixture of cubic and hexagonal (wurtzite type), and finally into stable hexagonal through different intermediate phases with an improvement in the crystal quality. The films showed a red shift in their optical spectra after annealing.