甲醛与乙腈相互作用的理论研究

在HF/ 6 311G(d ,p)、MP2 / 6 311G(d ,p)和B3LYP/ 6 311G(d ,p)水平上 ,对H2 CO和CH3 CN以及设计的 4种结构H2 CO…CH3 CN复合物等进行几何全优化和振动频率计算 ,排除振动频率为负值的非局域极小点结构 ,并对稳定的环状构型复合物结合能进行基组重叠误差校正和零点振动能校正 .分子间相互作用的能量分解分析显示 ,静电能在H2 CO…CH3 CN相互作用能量中占主导地位 ,电荷转移能居第二位 .     

HOX(X=F,Cl)二聚体红移氢键的理论研究

用理论方法研究了二聚体HOX(X=F,Cl)分子间氢键,在B3LYP/6-31+G(d,p)、 B3LYP/6-311++G(d,p)、MP2/6-31+G(d,p)和MP2/6-311++G(d,p)水平上,利用标准方法和均衡校正方法对二聚体进行了几何优化、振动频率和相互作用能的计算。同时,利用电子密度拓扑分析和自然键轨道分析对红移氢键的本质进行了分析。研究表明：分子间O—H…O和O—H…X(X=F,Cl)氢键的形成使二聚体中O—H键伸长,伸缩振动频率减小,形成红移氢键。NBO分析表明,电荷转移效应占优势,因此形成O—H…O和O—H…X(F,Cl)红移氢键。     

CH3⊕ … Br-Y(Y=H, CCH, CN, NC)缺电子体系中Br原子参与的反向卤键相互作用

采用B3LYP/6-311++G(d,p)和MP2/6-311++G(d,p)理论方法研究了CH₃^⊕…Br-Y(Y=H, CCH, CN, NC) 缺电子体系中Br参与的反向卤键(IXB)结构. 四个IXB复合物中,MP2/6-311++G(d,p)水平上考虑了基组叠加误差的分子间相互作用能分别为218.87, 219.48, 159.18和143.05 kJ/mol,相对稳定性的递增顺序CH₃^⊕…BrCN相似文献   

CH3CH2+N(4S)反应机理的理论研究

利用abinitio方法对CH3CH2+N(4S)反应进行了理论研究,在MP2/6-311+G(d,p)水平上优化得到了反应途径上的反应物、中间体、过渡态和产物的几何构型和谐振频率,并在QCISD(T)/6-311+G(d,p)水平上进行单点能计算.计算结果表明,CH2CH2+3NH和H2CN+CH3是此反应主要产物,CH3CHN+H是此反应次要产物.产物CH2CH2+3NH主要来自直接氢抽提反应通道,H2CN+CH3来自加成-解离反应通道,CH3CHN+H来自加成-解离反应通道.     

CH3CH2+O(3P)反应机理的理论研究

利用abinitio方法对CH3CH2+O(3P)反应进行了理论研究,在MP2/6311+G(d,p)水平上优化得到了反应途径上的反应物、中间体、过渡态和产物的几何构型和谐振频率,并在QCISD(T)/6311+G(d,p)水平上进行单点能计算.计算结果表明:CH2O+CH3、CH3CHO+H和CH2CH2+OH是主要反应产物,其中CH2O+CH3主要来自反应通道A1:(R)→IM1→TS3→(A),CH3CHO+H主要来自反应通道B1:(R)→IM1→TS4→(B),CH2CH2+OH主要来自直接抽提反应通道C1和C2:(R)→TS1(TS2)→(C).计算结果同时表明该反应生成CO的通道能垒是非常高的,CO应该不是主要产物.     

H2在Li掺杂Al6Si+上吸附的理论研究

本文利用密度泛函理论的B3LYP/6-31G(d, p)和组态相互作用的QCISD/6-31G(d, p)研究了Al6Si+和Al6SiLi+团簇的几何和电子结构及其对H2分子的吸附,两种不同方法计算的H2分子在团簇上的吸附能非常一致。H2分子在Al6Si+团簇上的吸附能仅为-0.018 eV,Al6Si+团簇中掺杂Li原子可以明显增强其对H2分子的吸附。Al6SiLi+团簇吸附一个H2分子的吸附能可以达到-0.157 eV,吸附五个H2分子的平均吸附能为-0.088 eV。态密度和自然键轨道分析表明,电荷从Li原子向Si原子转移,H2分子在带正电的Li离子产生的电场中发生极化,从而在静电相互作用下吸附在Li原子周围。     

SiH3+O(3P)反应机理的理论研究

利用abinitio方法对SiH3+O(3P)反应进行了理论研究,在MP2/6-311+G(d,p)水平上优化得到了反应途径上的反应物、中间体、过渡态和产物的几何构型,并在QCISD(T)/6-311+G(d,p)水平上进行单点能计算.计算结果表明,SiH3+O(3P)→IM1→TS3→IM2→TS8→HOSi+H2为主反应通道,其他可能存在的次要产物有HSiOH+H、H2SiO+H和HSiO+H2.HOSi、HSiO和HSiOH(cis)还可能进一步解离生成SiO.另外,计算结果对SiH4+O(3P)反应机理中存在的争议给出了可能的解释,认为Withnall等人在实验中观察到的产物HSiOH、H2SiO和SiO并不是SiH4+O(3P)反应的直接产物,而是来自副反应SiH3+O(3P).     

N(4S)+CH3X(X=Cl、Br)反应机理的理论研究

利用abinitio方法对N(4S)+CH3X(X=Cl、Br)反应进行了理论研究,在MP2/6311+G(d,p)水平上优化得到了反应途径上的反应物、过渡态和产物的几何构型和谐振频率,在MP2/6311++G(3df,2p)和QCISD(T)/6311+G(d,p)水平上进行单点能计算,并用G2MP2方法计算了所有物种的能量.计算结果表明,反应存在三条反应通道:H抽提反应通道a、Cl或Br抽提反应通道b和替代反应通道c.对于N(4S)+CH3Cl反应,a反应通道是主反应通道,b和c反应通道在反应中有少量贡献.对于N(4S)+CH3Br反应,a反应通道是主反应通道,b和c反应通道在反应中有一定的贡献.     

计算分子二阶超极化率的基组选择

设计和使用了扩展的6-31G,D95, ANO,aug-cc-pVDZ基组以及Hypol基组,用各种相关能级别的方法SCF,MP2,MP3,MP4D,MP4DQ,MP4SDQ,MP4, CCSD,CCSD(T),计算了H2O,CO,HF,H2,N2等分子的二阶超极化率.分别以4-aug-cc-pVTZ基组在不同方法下的二阶超极化率结果,和CCSD(T)/4-aug-cc-pVTZ水平上的结果作为标准,求得各水平计算相对应的平均相对偏差.结果发现:MP2/aug-cc- pVDZ+是计算二阶超极化率最优的水平.综合讨论认为:可在MP2/aug-cc-pVDZ+水平上计算分子的二阶超极化率,其结果是可靠的.而且如果同时要计算分子极化率和一阶超极化率,其结果也是可靠的.     

HArF和HNO二聚体相互作用氢键的理论研究

用二阶微扰理论结合6-311+G**、6-311++G**和6-311++G(2d,2p)基组对氢键相互作用二聚体HNO···HArF进行研究．在MP2/6-311+G**、MP2/6-311++G**和MP2/6-311++G(2d,2p)水平上，利用标准方法和均衡校正方法对二聚体进行了几何优化、振动频率和相互作用能的计算．对于相互作用能采用G2MP2方法计算．计算结果表明存在两种稳定的二聚体HNO···HArF结构，在这两种结构中，Dimer I(H···F)比Dimer II(H···O)更加稳定．通过振动频率的计算表明，在Dimer I(H···F)中存在N-H···F蓝移氢键，在DimerII(H···O)中存在Ar-H···O红移氢键，并对蓝移氢键加以确认．利用电子密度拓扑学分析和自然键轨道分析对于氢键红移和蓝移进行了合理解释．     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Single-beam self-referenced phase-sensitive surface plasmon resonance sensor with high detection resolution

A versatile and low-cost single-beam self-referenced phase-sensitive surface plasmon resonance(SPR)sensing system with ultra-high resolution performance is presented.The system exhibits a root-mean-square phase fluctuation of ±0.0028.over a period of 45 min.i.e.a resolution of±5.2×10-9 refractive index units.The enhanced performance has been achieved through the incorporation of three design elements:a true single-beam configuration enabling complete self-referencing so that only the phase change associated with SPR gets detected,a differential measurement scheme to eliminate spurious signals not related to the sensor response,and the elimination of retardation drifts by incorporating temperature stabilization in the liquid crystal phase modulato .Our design should bring the detection sensitivity of non-labeling SPR biosensing closer to that achievable by conventional fluorescence-based techniques.     

Influences of SiO2 protective layers and annealing on the laser-induced damage threshold of Ta2O5 films

Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition.The effects of SiO2 protective layers and annealing on the laser-induced damage threshold (LIDT) of the films are investigated.The results show that SiO2 protective layers exert little influence on the electric field intensity(EFI)distribution,microstructure and microdefect density but increase the absorption slightly.Annealing iS effective on decreasing the microdefect density and the absorption of the films.Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT.Moreover,the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing.     

A stereo matching algorithm using multi-peak candidate matches and geometric constraints

Gray cross correlation matching technique is adopted to extract candidate matches with gray cross correla- tion coefficients less than some certain range of maximal correlation coefficient called multi-peak candidate matches. Multi-peak candidates are extracted corresponding to three closest feature points at first. The corresponding multi-peak candidate matches are used to construct the model polygon. Correspondence is determined based on the local geometric relations between the three feature points and the multi-peak candidates. The disparity test and the global consistency checkout are applied to eliminate the remaining ambiguous matches that are not removed by the local geometric relational test. Experimental results show that the proposed algorithm is feasible and accurate.     

Fiber Modal Index Measurements Based on Fiber Gratings

A novel method based on fiber gratings for measuring the effective indices of fiber modes is proposed. The effective index difference between the core mode and a cladding mode was obtained by analyzing the interference fringe of a pair of cascaded long-period fiber gratings. In order to extract the core mode index from the measured index difference, an index matching oil immersion method is proposed. By analyzing the interaction between the cladding mode and the oil applied on the cladding surface, the mode order and the effective index of the involved cladding mode might be calculated. Experimental results about the interference fringe shifts induced by the oil index and the oil-applied length are also presented.     

Optical Pulse Compression Schemes That Use Nonlinear Bragg Gratings

Nonlinear optical pulse compression of picosecond pulses typically requires long lengths of optical fiber and multiple components. Periodic structures, such as fiber Bragg gratings, are highly dispersive at wavelengths outside of the photonic bandgap. This implies that such gratings can be used as very short all-fiber compressors. In this paper a number of such compression schemes are reviewed involving uniform and nonuniform fiber Bragg gratings, relying on both soliton and nonsoliton compression principles. Experimental results supporting the corresponding underlying theory are also presented. Finally, an extension of one of the compression schemes is shown, which allows the generation of adjustable high-repetition rate soliton trains.