Growth of sputter-deposited gold nanoparticles in ionic liquids

The growth of gold nanoparticles (NPs) synthesized by sputter deposition on an ionic liquid surface is studied in situ in the bulk phase of the ionic liquids (ILs) 1-butyl-3-methylimidazolium dicyanamide [C(1)C(4)Im][N(CN)(2)], 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)amide [C(1)C(4)Im][Tf(2)N], 1-butyl-3-methylimidazolium tetrafluoroborate [C(1)C(4)Im][BF(4)], 1-butyl-3-methylimidazolium hexafluorophosphate [C(1)C(4)Im][PF(6)] and 1-butyl-3-methylimidazolium triflate [C(1)C(4)Im][TfO]. It is found that primary nanoparticles with a diameter smaller than 2.5 nm are present in the sample immediately after sputtering. Growth of these primary particles proceeds after the end of the sputtering process and stops when the nanoparticles reach a certain size. Depending on the viscosity of the ionic liquid this growth process can proceed several hours to several days. The growth speed is fastest for the least viscous ionic liquid and follows the trend [C(1)C(4)Im][N(CN)(2)] > [C(1)C(4)Im][Tf(2)N] > [C(1)C(4)Im][TfO] > [C(1)C(4)Im][BF(4)] > [C(1)C(4)Im][PF(6)]. It is also found that a higher concentration of sputtered gold results in faster growth of the gold nanoparticles. A discussion on the growth mechanism of sputtered gold NPs is included.     

Thermochemistry of imidazolium-based ionic liquids: experiment and first-principles calculations

In this work the molar enthalpy of formation of the ionic liquid 1-ethyl-3-methylimidazolium dicyanoamide in the gaseous phase [C(2)MIM][N(CN)(2)] was measured by means of combustion calorimetry and enthalpy of vaporization using transpiration. Available, but scarce, primary experimental results on enthalpies of formation of imidazolium based ionic liquids with the cation [C(n)MIM] (where n = 2 and 4) and anions [N(CN)(2)], [NO(3)] and [NTf(2)] were collected and checked for consistency using a group additivity procedure. First-principles calculations of the enthalpies of formation in the gaseous phase for the ionic liquids with the common cation [C(n)MIM] (where n = 2 and 4) and with the anions [N(CN)(2)], [NO(3)], [NTf(2)], [Cl], [BF(4)] and [PF(6)] have been performed using the G3MP2 theory. It has been established that the gaseous phase enthalpies of formation of these ionic liquids obey the group additivity rules.     

Surface tension of binary mixtures of imidazolium and ammonium based ionic liquids with alcohols, or water: cation, anion effect

The surface tensions were measured at atmospheric pressure, with use of a ring tensiometer, of a series of alcoholic solutions of closely related ionic liquids: 1-methyl-3-methylimidazolium methylsulfate, [MMIM][CH3SO4] in alcohol (methanol, or ethanol, or 1-butanol at 298.15 K), 1-butyl-3-methylimidazolium methylsulfate, [BMIM][CH3SO4] in alcohol (methanol, or ethanol, or 1-butanol at 298.15 K), 1-butyl-3-methylimidazolium octylsulfate, [BMIM][OcSO4] in alcohol (methanol, or 1-butanol at 298.15 K) and of 1-hexyloxymethyl-3-methylimidazolium tetrafluoroborate, [C6H(13)OCH2MIM][BF4], 1,3-dihexyloxymethylimidazolium tetrafluoroborate, [(C6H13OCH2)2IM][BF4] in alcohol (methanol, or 1-butanol, or 1-hexanol at 308.15 and 318.5 K) and hexyl(2-hydroxyethyl)dimethylammonium bromide, C6Br in 1-octanol at 298.15 K. The set of ammonium ionic liquids of different cations and anions (C2Br, C2BF4, C2PF6, C2N(CN)2, C3Br, C4Br and C6Br) was chosen to show the influence of small amount of the ammonium ionic liquid on the surface tension of water at 298.15 K. The influence of the cation, or anion alkyl chain length on the properties under study (densities and surface tension) was tested.     

室温离子液体对氨基苯磺酸的萃取性能

系统研究了[C₄mim][PF₆], [C₆mim][PF₆], [C₆mim][BF₄]和[C₈mim][BF₄]室温离子液体对间氨基苯磺酸、对氨基苯磺酸稀水溶液的萃取平衡. 实验结果表明: 萃取温度和相体积比的变化对分配比影响不大; 水相pH值对萃取平衡有较大的影响, 氨基苯磺酸在离子液体/水体系中的分配比在pH＝4.2时达到最大值; 水相中CaCl₂或Na₂SO₄的存在能较大幅度地提高氨基苯磺酸的分配比; 离子液体的阴离子的性质对分配比有显著的影响, 阴离子为[BF₄]^－的离子液体对氨基苯磺酸的萃取能力大于阴离子为[PF₆]^－的离子液体; 咪唑环上烷基链的长度也对萃取效果有一定的影响. 在所研究的离子液体中, [C₆mim][BF₄]和[C₈mim][BF₄]对氨基苯磺酸有较好的萃取性能, 且萃取相中的氨基苯磺酸可回收利用, 离子液体也可循环使用.     

C6F5Xe]+ and [C6F5XeNCCH3]+ salts of the weakly coordinating borate anions, [BY4]- (Y = CN, CF3, or C6F5)

New examples of [C6F5Xe]+ salts of the weakly coordinating [BY4]- (Y = CN, CF3, or C6F5) anions were synthesized by metathesis of [C6F5Xe][BF4] with MI[BY4] (MI = K or Cs; Y = CN, CF3, or C6F5) in CH3CN at -40 degrees C, and were crystallized from CH2Cl2 or from a CH2Cl2/CH3CN solvent mixture. The low-temperature (-173 degrees C) X-ray crystal structures of the [C6F5Xe]+ cation and of the [C6F5XeNCCH3]+ adduct-cation are reported for [C6F5Xe][B(CF3)4], [C6F5XeNCCH3][B(CF3)4], [C6F5Xe][B(CN)4], and [C6F5XeNCCH3][B(C6F5)4]. The [C6F5Xe]+ cation, in each structure, interacts with either the anion or the solvent, with the weakest cation-anion interactions occurring for the [B(CF3)4]- anion. The solid-state Raman spectra of the [C6F5Xe]+ and [C6F5XeNCCH3]+ salts have been assigned with the aid of electronic structure calculations. Gas-phase thermodynamic calculations show that the donor-acceptor bond dissociation energy of [C6F5XeNCCH3]+ is approximately half that of [FXeNCCH3]+. Coordination of CH3CN to [C6F5Xe]+ is correlated with changes in the partial charges on mainly Xe, the ipso-C, and N, that is, the partial charge on Xe increases and those on the ipso-C and N decrease upon coordination, typifying a transition from a 2c-2e to a 3c-4e bond.     

1,2-bis(pyridine-2-carboxamido)benzenate(2-), (bpb)2-: a noninnocent ligand. Syntheses, structures, and mechanisms of formation of [(n-Bu)4N][FeIV2(mu-N)(bpb)2(X)2] (X = CN-, N3-) and the electronic structures of [MIII(bpbox1)(CN)2] (M = Co, Fe)

The well-known tetradentate ligand 1,2-bis(pyridine-2-carboxamido)benzenate(2-), (bpb)2-, and its 4,5-dichloro analogue, (bpc)2-, are shown to be "noninnocent" ligands in the sense that in coordination compounds they can exist in their radical one- and diamagnetic two-electron-oxidized forms (bpbox1)- and (bpbox2)0 (and (bpcox1)- and (bpcox2)0), respectively. Photolysis of high-spin [(n-Bu)4N][FeIII(bpb)(N3)2] and its (bpc)2- analogue in acetone solution at room temperature generates the diamagnetic dinuclear complex [(n-Bu)4N][FeIV2(mu-N)(bpb)2(N3)2] and its (bpc)2- analogue; the corresponding cyano complex [(n-Bu)4N][FeIV2(mu-N)(bpb)2(CN)2] has been prepared via N3- substitution by CN-. Photolysis in frozen acetonitrile solution produces a low-spin ferric species (S = 1/2) which presumably is [FeIII(bpbox2)(N)(N3)]-, as has been established by EPR and M?ssbauer spectroscopy. The mononuclear complexes [(n-Bu)4N][FeIII(bpb)(CN2)] (low spin), [Et4N][CoIII(bpb)(CN)2] and Na[CoIII(bpc)-(CN)2].3CH3OH can be electrochemically or chemically one-electron-oxidized to give [FeIII(bpbox1)(CN)2]0 (S = 0), [CoIII(bpbox1)(CN)2]0 (S = 1/2), and [CoIII(bpcox1)(CN)2]0 (S = 1/2). All complexes have been characterized by UV-vis, EPR, and M?ssbauer spectroscopy, and their electro- and magnetochemistries have been studied. The crystal structures of [(n-Bu)4N][FeIII(bpb)(N3)2].1/2C6H6CH3, Na[FeIII(bpb)(CN)2], Na[CoIII(bpc)(CN)2].3CH3OH, [(n-Bu)4N][FeIV2(mu-N)(bpb)2(CN)2], and [(n-Bu)4N][FeIV2(mu-N)(bpb)(N3)2] have been determined by single-crystal X-ray diffraction.     

乙炔氢氯化反应中的负载金-离子液体催化剂:离子态金物种的稳定机制

聚氯乙烯(PVC)作为世界通用工程塑料之一,具有优异的物理、化学和机械性能,在工业、农业、建筑、包装、电力等行业中应用广泛.氯乙烯是生产聚氯乙烯的重要单体.氯乙烯的生产主要有电石法和乙烯法两种工艺路线,由于我国“贫油、富煤、少气”的资源现状,电石法产能占全部产能的83%以上.电石法生产氯乙烯的原理是在氯化汞催化剂存在下,将电石水解精制后的乙炔气与氯化氢加成直接合成氯乙烯.随着节能减排及环保要求的逐渐提高和国际涉汞公约的实施,开发新一代绿色无汞催化剂具有重要的战略意义.近年来,金基催化剂是无汞催化剂基础研究和技术开发中最重要的方向.在之前的工作中,我们课题组首先报道了负载离子液体-金催化剂体系(Au-SILP)在电石法生产氯乙烯工艺中的应用,并发现离子液体的存在可以显著提高金活性物种在载体表面的分散度和稳定其化学价态.在后续研究中,我们在负载离子液体-金催化体系中引入金属铜离子(Cu^2+),利用反应过程中Au-Cu之间的氧化还原循环,设计并制备了金属铜基配位离子液体,构建了负载离子液体-金-铜催化剂体系.铜离子的引入形成了一个催化剂自身维持氧化态的微环境,实现了被还原金物种的原位氧化再生.本文在上述研究基础上,利用配位离子液体[Bmim][N(CN)2]中[N(CN)2^–]阴离子和阳离子金之间的强配位作用,构建出比Au-Cl键更稳定的Au–N键,并通过X射线光电子能谱(XPS)、球差校正-扫描透射电镜(AC-STEM)和扩展X射线吸收精细结构(EXAFS)表征证明了Au以单原子状态存在于载体表面.制备的Au-N(CN)2/AC催化剂在乙炔氢氯化反应中表现出比Au-Cl/AC和Au/AC催化剂更高的稳定性和催化活性以及更短的诱导期.进一步表征分析发现,[N(CN)2^–]配体促进了阳离子金和配体之间的电子转移,提高了阳离子金的电子云密度,削弱了乙炔在阳离子金上的吸附强度,抑制了其还原,提高了催化剂的稳定性.更重要的是,与阳离子金配位的[N(CN)2^–]配体使得反应过程中的氯化氢在氮位点发生化学解离,促进了氯化氢活化,同时降低了反应能垒.对负载配位离子液体-金催化体系反应诱导期的分析结果表明,反应诱导期与反应物(乙炔、氯化氢)分子在离子液体层中的溶解度无关,而主要取决于催化剂中Au(Ⅲ)物种的含量和反应物分子在离子液体中的扩散速率.上述研究结果进一步深化了离子液体和活性金物种之间电子的作用机理,建立了负载离子液体-金催化剂体系对反应物的活化机制和反应机理,为进一步开发具有工业应用价值的乙炔氢氯化反应无汞催化剂提供了科学基础和参考.     

New method of fluorination using potassium fluoride in ionic liquid: significantly enhanced reactivity of fluoride and improved selectivity

We have found the new nucleophilic fluorination reaction of some halo- and mesylalkanes to the corresponding fluoroalkanes with KF in the presence of [bmim][BF4] under various reaction conditions. 2-(3-Methanesulfonyloxypropoxy)naphthalene (1) was used as a model compound to optimize this fluorination reaction. Whereas the fluorination of the mesylate 1 with KF in an organic solvent such as CH3CN at 100 degrees C occurred hardly even after 24 h, the same reaction in ionic liquids, [bmim][BF4], as a reaction solvent was completed within 1.5 h, affording the wanted product 2-(3-fluoropropoxy)naphthalene 2a (85%) together with the alkene byproduct 2c (10%). Very interestingly, however, the addition of water (5 equiv) completely eliminated the formation of the undesired alkene 2c and thus gave higher yield of 2a (92%, entry 2). The use of acetonitrile as a cosolvent did not affect the reactivity of the fluorination. The presence of a proper amount of cosolvent was rather desirable (94% yield of 2a). We performed fluorination reactions with other ionic liquids ([bmim][PF6], [bmim][SbF6], [bmim][OTf], and [bmim][N(Tf)2], and two other cosolvents, to find the optimal ionic liquid and cosolvent. Nine different compounds were examined, including the 10 g-synthesis of 2-(fluoromethyl)naphthalene in 93% of isolated yield.     

Validation of the copper(i)-catalyzed azide-alkyne coupling in ionic liquids. Synthesis of a triazole-linked C-disaccharide as a case study

The first study of a copper(I)-catalyzed azide-alkyne click reaction in ionic liquids (ILs) is reported. The cycloaddition of a sugar azide with a sugar acetylene (CuI, i-Pr2EtN, 80 degrees C) was carried out in 10 ILs as well as in standard molecular solvents (toluene and DMF) to give the 1,4-disubstituted triazole-linked C-disaccharide. The highest yields (84 and 95%) were registered in Ammoeng 110 and [C(8)dabco][N(CN)(2)]. The latter solvent was recycled in four subsequent reactions without loss of the reaction efficiency. Reactions carried out in the absence of the Hünig's base afforded mixtures of 1,4- and 1,5-disubstituted triazole regioisomers.     

咪唑基离子液体的物理化学性质估算及预测(英文)

根据经验和半经验方程及空隙模型理论,可以估算及预测离子液体在298.15K的物理化学性质.本文讨论了离子液体的分子体积,密度,标准熵,晶格能,表面张力,等张比容,摩尔蒸发焓,空隙体积,空隙率和热膨胀系数.通过实验测得的三种离子液体1-乙基-3-甲基咪唑硫酸乙酯([C2mim][EtSO4)]),1-丁基-3-甲基咪唑硫酸辛酯([C4mim][OcSO4])和1-乙基-3-甲基咪唑双三氟甲磺酰亚胺盐([C2mim][NTf2])的密度和表面张力估算了它们的其它物理化学性质.由这三种离子液体的分子体积及等张比容预测了同系列中其它离子液体[Cnmim][EtSO4],[Cnmim][OcSO4]和[Cnmim][NTf2](n=1-6)的分子体积及等张比容,由此计算出它们的密度及表面张力.进而预测了它们的物理化学性质.将预测的离子液体[C4mim][NTf2]和[C2mim][OcSO4]的密度值与文献报导的实验值进行比较,其偏差在实验误差范围内.最后,将由Kabo经验方程计算的七个离子液体[C2mim][EtSO4]、[C4mim][OcSO4]、[C2mim][NTf2]、[C4mim][NTf2]、丁基三甲基铵双三氟甲磺酰亚胺盐([N4111][NTf2])、甲基三辛基铵双三氟甲磺酰亚胺盐([N8881][NTf2])和1-辛基-3-甲基吡啶四氟硼酸盐([m3opy][BF4])的摩尔蒸发焓与由Verevkin简单规则预测的摩尔蒸发焓进行比较,发现两者符合很好.因此,在缺乏密度和表面张力实验数据的情况下,可以用Verevkin简单规则来预测离子液体的摩尔蒸发焓.     

The OsO4F-, OsO4F2(2)-, and OsO3F3- anions, their study by vibrational and NMR spectroscopy and density functional theory calculations, and the X-ray crystal structures of [N(CH3)4][OsO4F] and [N(CH3)4][OsO3F3

The fluoride ion acceptor properties of OsO4 and OsO3F2 were investigated. The salts [N(CH3)4][OsO4F] and [N(CH3)4]2[OsO4F2] were prepared by the reactions of OsO4 with stoichiometric amounts of [N(CH3)4][F] in CH3CN solvent. The salts [N(CH3)4][OsO3F3] and [NO][OsO3F3] were prepared by the reactions of OsO3F2 with a stoichiometric amount of [N(CH3)4][F] in CH3CN solvent and with excess NOF, respectively. The OsO4F- anion was fully structurally characterized in the solid state by vibrational spectroscopy and by a single-crystal X-ray diffraction study of [N(CH3)4][OsO4F]: Abm2, a = 7.017(1) A, b = 11.401(2) A, c = 10.925(2) A, V = 874.1(3) A3, Z = 4, and R = 0.0282 at -50 degrees C. The cis-OsO4F2(2-) anion was characterized in the solid state by vibrational spectroscopy, and previous claims regarding the cis-OsO4F2(2-) anion are shown to be erroneous. The fac-OsO3F3- anion was fully structurally characterized in CH3CN solution by 19F NMR spectroscopy and in the solid state by vibrational spectroscopy of its N(CH3)4+ and NO+ salts and by a single-crystal X-ray diffraction study of [N(CH3)4][OsO3F3]: C2/c, a = 16.347(4) A, b = 13.475(3) A, c = 11.436(3) A, beta = 134.128(4) degrees, V = 1808.1(7) A3, Z = 8, and R = 0.0614 at -117 degrees C. The geometrical parameters and vibrational frequencies of OsO4F-, cis-OsO4F2(2-), monomeric OsO3F2, and fac-OsO3F3- and the fluoride affinities of OsO4 and monomeric OsO3F2 were calculated using density functional theory methods.     

Electrophilic nitration of aromatics in ionic liquid solvents.

Potential utility of a series of 1-ethyl-3-methylimidazolium salts [emim][X] with X = OTf-, CF3COO-, and NO3- as well as [HNEtPri2][CF3COO] (protonated Hünig's base) ionic liquids were explored as solvent for electrophilic nitration of aromatics using a variety of nitrating systems, namely NH4NO3/TFAA, isoamyl nitrate/BF3.Et2O, isoamyl nitrate/TfOH, Cu(NO3)/TFAA, and AgNO3/Tf2O. Among these, NH4NO3/TFAA (with [emim][CF3COO], [emim][NO3]) and isoamyl nitrate/BF3.Et2O, isoamyl nitrate/TfOH (with [emim][OTf]) provided the best overall systems both in terms of nitration efficiency and recycling/reuse of the ionic liquids. For [NO2][BF4] nitration, the commonly used ionic liquids [emim][AlCl4] and [emim][Al2Cl7] are unsuitable, as counterion exchange and arene nitration compete. [Emim][BF4] is ring nitrated with [NO2][BF4] producing [NO2-emim][BF4] salt, which is of limited utility due to its increased viscosity. Nitration in ionic liquids is surveyed using a host of aromatic substrates with varied reactivities. The preparative scope of the ionic liquids was also extended. Counterion dependency of the NMR spectra of the [emim][X] liquids can be used to gauge counterion exchange (metathesis) during nitration. Ionic liquid nitration is a useful alternative to classical nitration routes due to easier product isolation and recovery of the ionic liquid solvent, and because it avoids problems associated with neutralization of large quantities of strong acid.     

Homogeneous enzymatic reactions in ionic liquids with poly(ethylene glycol)-modified subtilisin

Subtilisin Carlsberg was covalently modified with comb-shaped poly(ethylene glycol) (PM13). PM13-modified subtilisin (PM13-Sub) was readily solubilized in three different ionic liquids (ILs), i.e., [Emim][Tf2N], [C2OC1mim][Tf2N] and [C2OHmim][Tf2N]. Analysis of homogeneous enzymatic reactions in the ILs revealed that PM13-Sub exhibited excellent catalytic performance while the native enzyme suspended in ILs showed no activity. Hydrophobicity of ILs slightly affected enzyme activity, and the relatively hydrophobic IL [Emim][Tf2N] was the preferred medium for enzymatic reactions, similar to enzymatic reactions in conventional organic solvents. Enzyme activity was much higher in [Emim][Tf2N] than in conventional organic solvents, and excellent activity was associated with unique properties of ILs such as hydrophobicity and high polarity. Furthermore, PM13-Sub showed good stability in [Emim][Tf2N], and maintained 80% of its initial activity after 60 h.     

The glass transition and the distribution of voids in room-temperature ionic liquids: a molecular dynamics study

The glass transition in prototypical room temperature ionic liquids has been investigated by molecular dynamics simulations based on an Amber-like empirical force field. Samples of [C(4)mim][PF(6)], [C(4)mim][Tf(2)N], and [C(3)mim][Tf(2)N] have been quenched from the liquid phase at T = 500 to a glassy state at T ～ 0 K in discontinuous steps of 20 K every 1.2 ns. The glass temperature estimated by simulation (T(g) = 209 K for [C(4)mim][PF(6)], T(g) = 204 K for [C(4)mim][Tf(2)N], and T(g) = 196 K for [C(3)mim][Tf(2)N]) agrees semi-quantitatively with the experimental values (T(g) = 193÷196 K for [C(4)mim][PF(6)], T(g) = 186÷189 K for [C(4)mim][Tf(2)N], and T(g) = 183 K for [C(3)mim][Tf(2)N]). A model electron density is introduced to identify voids in the system. The temperature dependence of the size distribution of voids provided by simulation reproduce well the experimental results of positron annihilation lifetime spectroscopy reported in G. Dlubek, Y. Yu, R. Krause-Rehberg, W. Beichel, S. Bulut, N. Pogodina, I. Krossing, and Ch. Friedrich, J. Chem. Phys. 133, 124502 (2010), with only one free parameter needed to fit the experimental data.     

过渡金属离子液体[C2mim][FeCl4]的溶解热

在干燥氩气氛下, 用等摩尔的高纯无水FeCl3和氯化1-甲基-3-乙基咪唑([C2mim][Cl])直接搅拌混合, 制备棕色透明的含过渡金属铁的离子液体[C2mim][FeCl4]. 在298.15 K下, 利用具有恒温环境的溶解反应热量计测定了这种离子液体的摩尔溶解焓(ΔsHm). 针对[C2mim][FeCl4]溶解于水后即分解的特点, 在Pitzer电解质溶液理论基础上, 提出了确定这种离子液体标准摩尔溶解焓的新方法, 得到了[C2mim][FeCl4]的标准摩尔溶解焓(ΔsH 0—m=-76.6 kJ/mol), 以及Pitzer焓参数组合: β(0)LFe,Cl+β(0)L[C2mim], Cl+ΦLFe,[C2mim]=0.072209和β(1)LFe,Cl+β(1)L[C2mim], Cl=0.15527. 借助热力学循环和Glasser离子液体晶格能理论, 用Fe3+, Cl-和[C2mim]+的离子水化焓数据以及[C2mim][FeCl4]标准摩尔溶解焓, 估算得到了配离子[FeCl4]-(g)解离成Fe3+(g)和4Cl-(g)的解离焓为5659 kJ/mol. 这个结果揭示了离子液体[C2mim][FeCl4]的标准摩尔溶解焓绝对值并不很大的原因, 即很大的离子水化焓被很大的[FeCl4]-(g)的解离焓相互抵消.     

Extraction and Separation of Co2+ from Ni2+ Using the Novel Task-Specific Ionic Liquids of [C4H9NH3][P507]

Russian Journal of Applied Chemistry - Novel task-specific ionic liquids of [C4H9NH3][P507], [C6H13NH3][P507], [C8H17NH3][P507], [C10H21NH3][P507] and [C12H25NH3][P507] were synthesized by one-step...     

Coordination solids derived from Cp*M(CN)3- (M = Rh,Ir)

Solutions of Rh2(OAc)4 and Et4N[Cp*Ir(CN)3] react to afford crystals of the one-dimensional coordination solid [Et4N[Cp*Ir(CN)3][Rh2(OAc)4]]. This reaction is reversed by coordinating solvents such as MeCN. The structure of the polymer consists of helical anionic chains containing Rh2(OAc)4 units linked via two of the three CN ligands of Cp*Ir(CN)3-. Use of the more Lewis acidic Rh2(O2CCF3)4 in place of Rh2(OAc)4 gave purple [(Et4N)2[Cp*Ir(CN)3]2[Rh2(O2CCF3)4]3], whose insolubility is attributed to stronger Rh-NC bonds as well as the presence of cross-linking. The species [[Cp*Rh(CN)3][Ni(en)n](PF6)] (n = 2, 3) crystallized from an aqueous solution of Et4N[Cp*Rh(CN)3] and [Ni(en)3](PF6)2; [[Cp*Rh(CN)3][Ni(en)2](PF6)] consists of helical chains based on cis-Ni(en)(2)2+ units. Aqueous solutions of Et4N[Cp*Ir(CN)3] and AgNO3 afforded the colorless solid Ag-[Cp*Ir(CN)3]. Recrystallization of this polymer from pyridine gave the hemipyridine adduct [Ag[Ag(py)][Cp*Ir(CN)3]2]. The 13C cross-polarization magic-angle spinning NMR spectrum of the pyridine derivative reveals two distinct Cp* groups, while in the pyridine-free precursor, the Cp*'s appear equivalent. The solid-state structure of [Ag[Ag(py)][Cp*Ir(CN)3]2] reveals a three-dimensional coordination polymer consisting of chains of Cp*Ir(CN)3- units linked to alternating Ag+ and Ag(py)+ units. The network structure arises by the linking of these helices through the third cyanide group on each Ir center.     

Effect of the structures of ionic liquids and alkylbenzene-derived amphiphiles on the inhibition of asphaltene precipitation from CO2-injected reservoir oils

The inhibition of asphaltene precipitation from high-pressure, CO(2)-injected reservoir oils by ionic and nonionic amphiphiles, the ionic liquids based on p-alkylpyridinium ([C(n)()py](+)) and N-butylisoquinolinium ([C(4)iql](+)) cations, and the alkylbenzene-derived amphiphiles p-alkylphenol (C(n)()phol), p-alkylbenzenesulfonic acid (C(n)()bsa), and sodium p-alkylbenzenesulfonate (C(n)()bsNa) was investigated for the first time. The influences of the structures of these compounds and the effect of the combination of their cations and anions were studied. The results show that the inhibition abilities of the alkylbenzene-derived amphiphiles first increase when n = 2-8 and then remain almost constant when n >/=8 and that the effectiveness follows the order C(n)()phol < C(n)()bsa approximately C(n)()bsNa. The inverse trend is observed for the ionic liquids [C(n)()py][Cl]; that is, their inhibition abilities decrease as n increases from 4 to 8 to 12. [C(4)iql][Cl] is more effective than [C(4)py][Cl], but [C(n)()py][BF(4)] and [C(n)()py][PF(6)] have almost no effect on the stabilization of asphaltenes. It was found that the effectiveness of an alkylbenzene-derived amphiphile on the inhibition of asphaltene precipitation from reservoir oils relies on its ability to form a stable steric-stabilization layer around asphaltenes, which is controlled by the polarity of its headgroup and the length of its alkyl tail. The novel mechanism of inhibiting asphaltene precipitation using the ionic liquids [C(n)()py] ([Cl], [BF(4)], and [PF(6)]) and [C(4)iql][Cl] was proposed. The mechanism states that the ionic liquids can effectively prevent asphaltene precipitation from the reservoir oils by breaking the asphaltene associations, which are due to the local nonneutrality of the charge densities of the cation and the anion. The ionic liquids that are based on an anion with high charge density, in connection with cations with sufficiently low charge densities, can effectively inhibit asphaltene precipitation from the reservoir oils. This mechanism is also important for studying the thermodynamic properties and phase behavior of the ionic liquids.     

Solvation of UCl6(2-) anionic complex by MeBu3N(+), BuMe2Im(+), and BuMeIm(+) cations

The complexes [MeBu 3N] 2[UCl 6] and [BuMe 2Im] 2[UCl 6] were characterized in the solid state and in solution of [MeBu 3N][Tf 2N], [BuMe 2Im][Tf 2N], and [BuMeIm][Tf 2N] room-temperature ionic liquids using single-crystal XRD, EXAFS, electrochemistry, UV-visible absorption spectroscopy, and NMR. In the solid state and in solution, the existence of hydrogen bonding between the UCl 6 (2-) complex and the ionic liquid cations was revealed by these techniques. The MeBu 3N (+) cation interacts with UCl 6 (2-) via the protons on the alpha-carbon atoms of nitrogen. The protons of the imidazolium ring account for the interaction between the BuMe 2Im (+) cation and the UCl 6 (2-) anion. For the BuMeIm (+) cation the major interaction was confirmed between the most acidic proton on C(2) and the chlorides of UCl 6 (2-). The experimental results also show that the intensity of the interaction between the UCl 6 (2-) anion and the cation varies with the ionic liquid cation in the following order: MeBu 3N (+) approximately BuMe 2Im (+) < BuMeIm (+).     

Thermodynamic modeling of the phase behavior of binary systems of ionic liquids and carbon dioxide with the group contribution equation of state

The group contribution equation of state (GC-EOS) was applied to predict the phase behavior of binary systems of ionic liquids of the homologous families 1-alkyl-3-methylimidazolium hexafluorophosphate and tetrafluoroborate with CO2. Pure group parameters for the new ionic liquid functional groups [-mim][PF6] and [-mim][BF4] and interaction parameters between these groups and the paraffin (CH3, CH2) and CO2 groups were estimated. The GC-EOS extended with the new parameters was applied to predict high-pressure phase equilibria in binary mixtures of the ionic liquids [emim][PF6], [bmim][PF6], [hmim][PF6], [bmim][BF4], [hmim][BF4], and [omim][BF4] with CO2. The agreement between experimental and predicted bubble point data for the ionic liquids was excellent for pressures up to 20 MPa, and even for pressures up to about 100 MPa, the agreement was good. The results show the capability of the GC-EOS to describe phase equilibria of systems consisting of ionic liquids.