Ion-transfer voltammetry at 1,6-dichlorohexane|water and 1,4-dichlorobutane|water interfaces

The usefulness of 1,6-dichlorohexane (1,6-DCH) and 1,4-dichlorobutane (1,4-DCB) as organic solvent (O) for ion-transfer voltammetry at O|water (W) interface has been examined, and the results are compared with those with 1,2-dichloroethane (1,2-DCE). The width of potential window of the 0.1 M tetraoctylammonium tetrakis(4-chlorophenyl)borate (O)|0.05 M Li₂SO₄ (W) interface increased in the sequence: O = 1,6-DCH > 1,4-DCB > 1,2-DCE. The voltammetric behavior of the transfer of various cations and anions at the 1,6-DCH|W and 1,4-DCB|W interfaces has been shown to be of reversible nature, and the midpoint potentials or the reversible half-wave potentials have been determined. The midpoint potentials of hydrophilic ions have also been determined by the analysis of anodic final rise or cathodic final decent of the voltammograms with the O|W interfaces, where the W contains a salt of the hydrophilic ion. Also, the effect of ion-pair formation in O on the midpoint potentials has also been discussed.     

Voltammetric study of the transfer of fluoride ion at the nitrobenzene / water interface assisted by tetraphenylantimony.

The transfer of F- ion assisted by an organometallic complex cation tetraphenylantimony (TPhSb+) across the polarized nitrobenzene / water (NB / W) interface has been studied by means of ion-transfer voltammetry. A well-defined voltammetric wave was observed within the potential window at the NB / W interface when tetraphenylantimony tetrakis(4-chlorophenyl) borate and F- ion were present in NB and W, respectively. The voltammogram can be interpreted as being due to the reversible transfer of F- ion assisted by the formation of the TPhSbF complex through the coordination of F- to Sb atom in NB. The formal formation constant of TPhSbF in NB has been determined to be 10(1.95 +/- 0.2 M(-1). No voltammetric wave due to the TPhSb(+)-assisted transfer of other anions such as Cl-, Br, I-, NO3-, CH3COO- and H2PO4(-) ions has been observed within the potential window.     

Interfacial transfer of Cd2+ assisted by 4′ — morpholino-acetophenone-4-phenyl-3-thiosemicarbazone across the water/1,2-dichloroethane interface

The assisted transfer of heavy metal ions by interfacial complexation with 4′-morpholinoacetophenone-4-phenyl-3-thiosemicarbazone (MAPPT) at the interface between two immiscible electrolyte solutions (ITIES) was studied by cyclic voltammetry. The voltammograms obtained across the water/1,2-dichloroethane interface using the MAPPT ligand in the organic phase shows that the assisted metal ion transfers have different nature for different ions. The quasi-reversible voltammetric peak of the Cd²⁺ ion was obtained and is discussed in detail. The dependence of the half-wave transfer potential on MAPPT concentration showed that the equilibrium is effectively displaced towards a 1:3 (metal:ligand) stoichiometry with an association constant of log β ^o =15.46 (±0.11) for the Cd²⁺ ion, corresponding to the TIC/TID mechanism.      

Voltammetric behavior of the transfer of mono- and polyammonium ions across a phospholipid monolayer at the nitrobenzene/water interface.

The influence of a phospholipid, dipalmitoyl phosphatidylcholine, layer at a nitrobenzenelwater interface on the transfer of tetraethylammonium ion and a polyammonium anti-fungus agent, poly[(dimethylimino)(2-oxo-1,2-ethanediyl)imino1,6-hexanediylimino (1-oxo-1,2-ethanediyl)(dimethylimino)-1,6-hexanediyl] ion, across the interface was studied by normal pulse voltammetry. When the phospholipid was adsorbed to form a monolayer at the nitrobenzenelwater interface by its addition to the organic phase, the half-wave potential in the current vs. potential curves for the transfer of tetraethylammonium ion did not change, but the limiting current was significantly decreased at certain sampling times, indicating a retarding effect of the layer on the ion-transfer. On the other hand, in the current vs. potential curves for the transfer of the polyammonium ion, no significant change in either the half-wave potential or the limiting current was observed upon adding the phospholipid, indicating that the polyammonium ion can easily permeate through the phospholipid layer. The results suggest a new application of the voltammetric technique to the study of cell membrane permeability to polyionic bioactive compounds.     

Voltammetric study of the transfer of polyammonium ions at nitrobenzene / water interface.

The transfer of polyammonium ions, poly[(dimethylimino)-1,6-hexanediyl] (n = 140, n being the degree of polymerization) ion and poly[(dimethylimino)(2-oxo-1,2-ethanediyl)imino-alpha,omega-alkanediylimino(1-oxo-1,2-ethanediyl)(dimethylimino)-alpha',omega'-alkanediyl] ([-N+ (CH3)2CH2CONH(CH2)x NHCOCH2N+ (CH3)2(CH2)y-]n, x = 2, 3, 4, or 6, y = 3 or 6, and n = 30-130) ions, at a polarizable nitrobenzene / water interface has been studied by normal pulse voltammetry and cyclic voltammetry. Despite the polydispersity of the preparations, by normal pulse voltammetry, an S-shaped current-potential curve with a well-defined limiting current, and, by cyclic voltammetry, a pair of anodic and cathodic peak currents due to the transfer of polyammonium ions across the interface were observed within the potential window. The voltammetric behavior is described. Also, the effect of ion-pair formation of the polyammonium ions with supporting electrolyte anions in nitrobenzene- and water-phases on the half-wave or midpoint potential of the ion-transfer, and the relation between the structure of the polyammonium ions and the transfer potentials are discussed.     

Electrochemical behaviour and voltammetric sensitivity at arrays of nanoscale interfaces between immiscible liquids

Arrays of nanoscale interfaces between immiscible electrolyte solutions were formed using silicon nitride nanopore array membranes. Nanopores in the range from 75 nm radius down to 17 nm radius were used to form the nano-interfaces. It was found that the liquid organic phase electrolyte solution filled the pores so that inlaid nano-interfaces were formed with the aqueous phase. Cyclic voltammetry at these nano-interface arrays demonstrated steady-state behaviour at the larger interfaces but the voltammetric wave-shape became progressively worse as the interface size decreased. It was found that the ion transfer currents were ca. 50% of those expected based on theoretical calculations, which is attributed to overlap of diffusion zones at adjacent nano-interfaces. Here, the separation between adjacent nano-interfaces was 20-times the interface radius. The analytical sensitivity for ion transfer from the aqueous to the 1,6-dichlorohexane organic phase was estimated from calibration plots of current density versus concentration of aqueous tetraethylammonium cation. The sensitivity was in the range of 65 μA cm(-2) μM(-1) (at 75 nm radius interfaces) to 265 μA cm(-2) μM(-1) (at 17 nm radius interfaces). The sensitivity depended directly on the inverse of the nano-interface radius, implying that smaller interfaces will provide better sensitivity, due to the enhanced flux of analyte arising from convergent diffusion to smaller electrochemical interfaces.     

Oxidation of ascorbate and ascorbic acid at the aqueous|organic solution interface

An electron transfer reaction between ascorbate in an aqueous solution and oxidizing agents in an organic solution immiscible with water has been studied for the first time by polarography for charge transfer at the interface between two immiscible electrolyte solutions. A reversible electron transfer polarogram at the aqueous|organic solution interface could be observed when teterachlorobenzoquinone, dibromobenzoquinone and Meldola's Blue were used as oxidizing agents in the organic solution. The oxidation reaction of ascorbate at the aqueous|organic interface was discussed comparing with the reactions at the ordinary electrodes and in homogeneous solutions. The half-wave potentials of electron transfer polarograms at the aqueous|nitrobenzene interface were applied to evaluate the formal redox potential of ascorbate/ascorbate free radical.     

Ion-transfer voltammetry of local anesthetics at an organic solvent/water interface and pharmacological activity vs. ion partition coefficient relationship.

The ion-transfer reaction of local anesthetics at an organic solvent/water interface has been studied using cyclic voltammetry (CV) with a stationary nitrobenzene (NB)/water (W) interface. Procaine and seven other local anesthetics gave reversible or quasi-reversible voltammograms at the NB/W interface in the pH range between 0.9 and 9.6. These drugs are present in aqueous solution in either neutral or ionic form, or both forms. The half-wave potential, as determined by the midpoint potential in CV, vs. pH curves, were determined and analyzed to determine the partition coefficients of both neutral and ionic forms of the drugs between NB and W. The partition coefficients of the ionic forms were derived from their formal potential of transfer at an NB/W interface. The dissociation constants of ionic forms of the drugs in NB were also deduced. A high correlation between the pharmacological activity and the partition coefficient of the ionic form of amide-linked local anesthetics has been shown.     

Oxidation of chlorine(III) by hypobromous acid: kinetics and mechanism

The kinetics and mechanism of the chlorine(III)-HOBr reaction were studied by the stopped-flow method under acidic conditions, pH 1.0-3.0, in 1.0 M NaClO(4) and at 25.0 degrees C. The overall redox process occurs in two consecutive steps via the formation of the BrClO(2) intermediate. The electron transfer reactions are coupled with bromine hydrolysis, the formation of the tribromide ion, and the protolytic equilibrium of chlorine(III). On the basis of simultaneous evaluation of the kinetic traces, the following rate constants were obtained for the redox steps: HClO(2) + HOBr right harpoon over left harpoon BrClO(2) + H(2)O, k(3) = (3.34 +/- 0.02) x 10(4) M(-1) s(-1), k(-3) = (3.5 +/- 1.3) x 10(3) s(-1); BrClO(2) + ClO(2)(-)<==>2ClO(2) + Br(-), k(4) = (2.9 +/- 1.0) x 10(7) M(-1) s(-1). The second step was practically irreversible under the conditions applied, and the value of k(-4) could not be determined. The equilibrium constant for the formation of BrClO(2), K(3) = 9.5 M(-1), was calculated from the kinetic results, and it was confirmed that this species is a very powerful oxidant. The redox potential was also estimated for the BrClO(2) + e(-) = Br(-) + ClO(2) reaction: epsilon(0) approximately 1.70 V.     

Voltammetric determination of facilitated ion transfer across the water/1,2-dichloroethane interface

The facilitated transfer characteristics of Cd²⁺ ion by 4-morpholinoacetophenone-4-ethyl-3-thiosemicarbazone (MAPET) across water/1,2-dicholoroethane (1,2-DCE) interface and its electrochemical properties were investigated by voltammetric measurements. Cyclic voltammetry (CV) was employed to examine the transfer in the conditions of the ligand (organic phase) in excess and the obtained transfer peaks have reversible nature at different metal concentrations and scan rates. The dependence of the obtained half-wave transfer potential on MAPET concentration showed that the equilibrium is effectively displaced towards a 1: 3 (Cd²⁺: ligand) stoichiometry with an association constant of logβ ₃ ⁰ = 12.96 ± 0.09 for the Cd²⁺ ion, corresponding to the TIC/TID mechanism.     

Structure and dynamics of the interface between a Ag single crystal electrode and an aqueous electrolyte

The aim of this work is to elucidate the initial steps of the electrochemical oxidation of Ag(111) in alkaline electrolytes. We use electrochemical as well as ex situ (XPS) and in situ (SHG) spectroscopic techniques to reconstruct the Ag(111)/electrolyte interface as a complex dynamic entity. Moving in the direction from negative to positive potentials we first observe specific adsorption of hydroxide ions, which starts at ca. -1.1 V vs. Ag/Ag2O in 0.1 M NaOH. SHG data prove that hydroxide retains its negative charge. At -0.3 V oxidation of the surface sets in with the formation of negatively charged adsorbed oxygen species and Ag+ ions, which give rise to peaks at 528.2 +/- 0.2 eV and at 367.7 eV in the O 1s and the Ag 3d(5/2) XP spectra, respectively. Around -0.1 V the adlayer is transformed into an ordered surface oxide phase which grows via a nucleation and growth mechanism. Above the reversible Ag/Ag2O potential the 2D Ag(I) oxide transforms into a 3D Ag(I) oxide. The electrochemical oxidation is compared with the previously studied gas-phase process, demonstrating both remarkable similarities as well as some differences.     

19F NMR study of the equilibria and dynamics of the Al3+/F- system

A careful reinvestigation by high-field 19F NMR (470 MHz) spectroscopy has been made of the Al3+/F- system in aqueous solution under carefully controlled conditions of pH, concentration, ionic strength (I), and temperature. The 19F NMR spectra show five distinct signals at 278 K and I = 0.6 M (TMACl) which have been attributed to the complexes AlFi(3-i)+(aq) with i < or = 5. There was no need to invoke AlFi(OH)j(3-i-j)+ mixed complexes in the model under our experimental conditions (pH < or = 6.5), nor was any evidence obtained for the formation of AlF6(3-)(aq) at very high ratios of F-/Al3+. The stepwise equilibrium constants obtained for the complexes by integration of the 19F signals are in good agreement with literature data given the differences in medium and temperature. In I = 0.6 M TMACl at 278 K and in I = 3 M KCl at 298 K the log Ki values are 6.42, 5.41, 3.99, 2.50, and 0.84 (for species i = 1-5) and 6.35, 5.25, and 4.11 (for species i = 1-3), respectively. Disappearance of the 19F NMR signals under certain conditions was shown to be due to precipitation. Certain 19F NMR signals exhibit temperature- and concentration-dependent exchange broadening. Detailed line shape analysis of the spectra and magnetization transfer measurements indicate that the kinetics are dominated by F- exchange rather than complex formation. The detected reactions and their rate constants are AlF2(2+) + *F- reversible AlF*F2+ + F- (k02 = (1.8 +/- 0.3) x 10(6) M-1 s-1), AlF3(0) + *F- reversible AlF2*F0 + F- (k03 = (3.9 +/- 0.9) x 10(6) M-1 s-1), and AlF3(0) + H*F reversible AlF2*F0 + HF (kH03 = (6.6 +/- 0.5) x 10(4) M-1 s-1). The rates of these exchange reactions increase markedly with increasing F- substitution. Thus, the reactions of AlF2+(aq) were too inert to be detected even on the T1 NMR time scale, while some of the reactions of AlF3(0)(aq) were fast, causing large line broadening. The ligand exchange appears to follow an associative interchange mechanism. The cis-trans isomerization of AlF2+(aq), consistent with octahedral geometry for that complex, is slowed sufficiently to be observed at temperatures around 270 K. Difference between the Al3+/F- system and the much studied Al3+/OH- system are briefly commented on.     

A new approach to micropatterning: application of potential-assisted ion transfer at the liquid-liquid interface for the local metal deposition

A new approach to micropatterning is demonstrated. The approach is based on driving an electrochemical process at the solid-liquid interface through the formation of a flux of ions from a micropipet that is held in close proximity to the surface. The flux of ions is generated by the so-called potential assisted ion transfer at the interface between two immiscible electrolyte solutions (ITIES). As a model system, the local deposition of silver was examined. Specifically, a constant potential, which was applied to a micropipet filled with an aqueous solution of silver ions, caused the transfer of Ag(+) into the outer nitrobenzene (NB) solution that consisted of an electrolyte, tetrabutylammonium tetrakis[4-chlorophenyl]borate (TBATPBCl). To facilitate the transfer of silver ions a macrocyclic ligand, that is, dibenzo-24-crown-8 (DB24C8), was added to the organic phase. The Faradaic current of this micro-ITIES was used as a means of controlling the tip-surface distance in scanning electrochemical microscopy (SECM) and depositing silver microstructures on a gold substrate.     

Measurement of the dependence of interfacial charge-transfer rate constants on the reorganization energy of redox species at n-ZnO/H2O interfaces

The interfacial energetic and kinetics behavior of n-ZnO/H2O contacts have been determined for a series of compounds, cobalt trisbipyridine (Co(bpy)3(3+/2+)), ruthenium pentaamine pyridine (Ru(NH3)5 py(3+/2+)), cobalt bis-1,4,7-trithiacyclononane (Co(TTCN)2(3+/2+)), and osmium bis-dimethyl bipyridine bis-imidazole (Os(Me2bpy)2(Im)2(3+/2+)), which have similar formal reduction potentials yet which have reorganization energies that span approximately 1 eV. Differential capacitance vs potential and current density vs potential measurements were used to measure the interfacial electron-transfer rate constants for this series of one-electron outer-sphere redox couples. Each interface displayed a first-order dependence on the concentration of redox acceptor species and a first-order dependence on the concentration of electrons in the conduction band at the semiconductor surface, in accord with expectations for the ideal model of a semiconductor/liquid contact. Rate constants varied from 1 x 10(-19) to 6 x 10(-17) cm4 s(-1). The interfacial electron-transfer rate constant decreased as the reorganization energy, lambda, of the acceptor species increased, and a plot of the logarithm of the electron-transfer rate constant vs (lambda + deltaG(o)')(2)/4lambda k(B)T (where deltaG(o)' is the driving force for interfacial charge transfer) was linear with a slope of approximately -1. The rate constant at optimal exoergicity was found to be approximately 5 x 10(-17) cm4 s(-1) for this system. These results show that interfacial electron-transfer rate constants at semiconductor electrodes are in good agreement with the predictions of a Marcus-type model of interfacial electron-transfer reactions.     

Electrochemical study of dopamine and noradrenaline at the water/1,6-dichlorohexane interface

Interfaces between two immiscible electrolyte solutions are recognized as a simplified model for biological systems and they can be of great relevance to the characterization of biomolecules and their role in biological systems. In this work, ion transfer and facilitated ion transfer of protonated catecholamines (dopamine and noradrenaline) by dibenzo-18-crown-6 are investigated at the water/1,6-dichlorohexane interface. The formation constant of the complex between both dopamine and noradrenaline with dibenzo-18-crown-6 was evaluated and the experimental conditions for the analytical determination of those catecholamines are established. These results can improve the understanding of the pharmacodynamics of the catecholamines, and contribute to the study of their interaction with biological membranes. Furthermore it can be used to develop an alternative method for the determination of neural signal transmission catecholamines.     

Silver(I)-selective coated-wire electrode based on an octahydroxycalix[4]arene derivative.

The performance of octahydroxycalix[4]arene derivative used as a neutral carrier for silver polymeric membrane electrode was studied. The sensor gave a good Nernstian response of 58 +/- 1 mV per decade for silver ion in the activity range 3.3 x 10(-6) to 3.3 x 10(-2) M Ag+. The limit of detection reached 2.1 x 10(-6) M Ag+ and exhibited high selectivity for silver ion against the alkali, alkaline earth and transition metal ions. The sensor can be used in wide pH range from 1.5 to 6.5. The response time of the sensor is less than 20 s. The potentiometric sensor was used as the indicator electrode in the titration of Ag+ ions by sodium chloride solution.     

Cyclic voltammetry of highly hydrophilic ions at a supported liquid membrane

Cyclic voltammetry has been used to study the coupling of ion transfer reactions at a liquid membrane. The liquids are either supported by a porous hydrophobic membrane (polyvinylidene difluoride, PVDF) when the organic solvent is non-volatile (o-nitrophenyloctylether) or are merely a free standing organic solvent layer such as 1,2-dichloroethane comprised between two hydrophilic dialysis membranes supporting the adjacent aqueous phases. The passage of current across the liquid membrane is associated with two ion transfer reactions across the two polarised liquid liquid interfaces in series. It is shown that it is possible to study the transfer of highly hydrophilic ions at one interface by limiting the mass transfer of the other ion transfer reaction at the other interface. Indeed, for systems comprising an ion M in one aqueous phase and a reference ion R partitioned between the membrane and the other aqueous phase, the observed and simulated cyclic voltammograms have a half-wave potential determined by the Gibbs energy of transfer of M transferring at one interface and by the limiting mass transfer of R at the other interface. This new methodology opens a way to measure the Gibbs energy of transfer of highly hydrophilic or hydrophobic ions, which usually limits the potential window at single liquid liquid interfaces (ITIES).     

On the formation of iron(III) hydroxo acetate complexes

The formation of hydroxo acetate complexes of iron (III) ion has been studied at 25 degrees C in 3 M (Na)ClO4 ionic medium by measuring with a glass electrode the hydrogen ion concentration in Fe(ClO4)3-HClO4-NaAc mixtures (Ac = acetate ion). The acetate/metal ratio ranged from 0 to 6, the metal concentration varied from 0.005 to 0.06 M, whereas [H+] was stepwise decreased from 0.1 M to initial precipitation of hydroxo-acetates. This occurred, depending on the acetate/metal ratio, in the -log[H+] range 1.85-2.7. The potentiometric data are consistent with the presence of Fe3(OH)3Ac3(3+), Fe2(OH)2(4+), Fe3(OH)4(5+), Fe3(OH)5(4+) and, as minor species, of Fe3(OH)2Ac6+, FeAc2+, FeAc2+, FeOH2+ and Fe(OH)2+. Previously published EMF measurements with redox and glass half-cells were recalculated to refine the stability constants of FeAc2+, FeAc2+ and Fe3(OH)2Ac6+. Formation constants *beta pqr for pFe(3+)+(q-r)H2O + rHAc reversible Fep(OH)(q-r)(Ac)r3p-q + qH+ (in parenthesis the infinite dilution value): log*beta 111 = -1.85 +/- 0.02 (-0.67 +/- 0.15), log*beta 122 = -3.43 +/- 0.02 (-1.45 +/- 0.15); log*beta 363 = -5.66 +/- 0.03 (-2.85 +/- 0.40), log*beta 386 = -8.016 +/- 0.006 (-4.06 +/- 0.15), log*beta 220 = -2.88 +/- 0.02 (-2.84 +/- 0.05), log*beta 340 = -6.14 +/- 0.18 (-6.9 +/- 0.4), log*beta 350 = -8.44 +/- 0.09 (-7.65 +/- 0.15).     

Design of a new dodecyl sulfate-selective electrode based on conductive polyaniline.

A new, simple, sensitive, low cost and rapid potentiometric method for direct determination of ultra trace amounts of sodium dodecyl sulfate (SDS) with a new DS(-)-selective electrode is reported. The electrode was prepared by electropolymerization of aniline in acidified DS- ion on the surface of a Pt electrode. The cyclic voltammetry (CV) was used for electropolymerization of polyaniline (PA) in the potential range of -200 to +1000 mV vs. Ag/AgCl. This sensor showed a Nernstian behavior (59.0 +/- 2.3 mV/decade) over a very wide linear range (1.0 x 10(-9)-3.0 x 10(-6) M) with a detection limit of 1.0 x 10(-9) M. The response time of the electrode was 15 s for 1.0 x 10(-7) M of analyte; the electrode can be used for 4 weeks without any major deviation. This electrode can be used in the pH range of 3.5-9.8. The selectivity of electrode to DS- over some organic, inorganic and anionic surfactants was investigated with the fixed primary ion method. The results show that the electrode is highly selective to DS- ion over other ions. The proposed electrode was applied to the determination of DS- in real samples.     

Reactions of Cl*/Cl2*- radicals with the nanoparticle silica surface and with humic acids: model reactions for the aqueous phase chemistry of the atmosphere

Reactions of chlorine radicals might play a role in aqueous aerosols where a core of inorganic components containing insulators such as SiO2 and dissolved HUmic-LIke Substances (HULIS) are present. Herein, we report conventional flash photolysis experiments performed to investigate the aqueous phase reactions of silica nanoparticles (NP) and humic acid (HA) with chlorine atoms, Cl*, and dichloride radical anions, Cl2*-. Silica NP and HA may be taken as rough models for the inorganic core and HULIS contained in atmospheric particles, respectively. Both Cl* and Cl2*- were observed to react with the deprotonated silanols on the NP surface with reaction rate constants, k +/- sigma, of (9 +/- 6) x 10(7) M(-1) s(-1) and (7 +/- 4) x 10(5) M(-1) s(-1), respectively. The reaction of Cl* with the surface deprotonated silanols leads to the formation of SiO* defects. HA are also observed to react with Cl* and Cl2*- radicals, with reaction rate constants at pH 4 of (3 +/- 2) x 10(10) M(-1) s(-1) and (1.2 +/- 0.3) x 10(9) M(-1) s(-1), respectively. The high values observed for these constants were discussed in terms of the multifunctional heterogeneous mixture of organic molecules conforming HA.