首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 281 毫秒
1.
A periodic superimposed motion may notably influence the flow structure and the development of the convective heat transfer relative to non‐deformable case. In particular, a radial deformation of a circular cylinder, may cause a possible synchronization with the cylinder wake, which is itself periodic when Vortex Street takes place. This synchronization phenomenon, often called ‘lock‐in’, may cause undesirable effects, but may also constitute a way of controlling the wake development. Body deformability may be used as wake control device that would favourably affect the interplay of primary and secondary vorticities, thus reducing the drag coefficient. These numerical and experimental studies are done herein for a Reynolds number equal to 23500. The problem is resolved by using the Navier–Stokes equations in the vorticity‐stream function form. The vorticity transport equation is solved by a second‐order finite difference method in both directions of the domains. The Poisson equation for the stream‐function is solved by a SOR method. The advance in time is achieved by a second‐order Adams–Bashforth scheme. The effect of turbulence is represented by eddy viscosity νt, which is determined by a sub‐grid‐scale model. In the present study, we use a Smagorinsky model. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

2.
This paper describes the finite difference numerical procedure for solving velocity–vorticity form of the Navier–Stokes equations in three dimensions. The velocity Poisson equations are made parabolic using the false‐transient technique and are solved along with the vorticity transport equations. The parabolic velocity Poisson equations are advanced in time using the alternating direction implicit (ADI) procedure and are solved along with the continuity equation for velocities, thus ensuring a divergence‐free velocity field. The vorticity transport equations in conservative form are solved using the second‐order accurate Adams–Bashforth central difference scheme in order to assure divergence‐free vorticity field in three dimensions. The velocity and vorticity Cartesian components are discretized using a central difference scheme on a staggered grid for accuracy reasons. The application of the ADI procedure for the parabolic velocity Poisson equations along with the continuity equation results in diagonally dominant tri‐diagonal matrix equations. Thus the explicit method for the vorticity equations and the tri‐diagonal matrix algorithm for the Poisson equations combine to give a simplified numerical scheme for solving three‐dimensional problems, which otherwise requires enormous computational effort. For three‐dimensional‐driven cavity flow predictions, the present method is found to be efficient and accurate for the Reynolds number range 100?Re?2000. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

3.
A numerical method is developed for investigating the two‐dimensional unsteady viscous flow over an inclined elliptic cylinder placed in a uniform stream of infinite extent. The direction of the free stream is normal to the cylinder axis and the flow field unsteadiness arises from two effects, the first is due to the flow field development following the start of the motion and the second is due to vortex shedding in the wake region. The time‐dependent flow is governed by the full conservation equations of mass and momentum with no boundary layer approximations. The parameters involved are the cylinder axis ratio, Reynolds number and the angle of attack. The investigation covers a Reynolds number range up to 5000. The minor–major axis ratio of the elliptic cylinder ranges between 0.5 and 0.6, and the angle of attack ranges between 0° and 90°. A series truncation method based on Fourier series is used to reduce the governing Navier–Stokes equations to two coupled infinite sets of second‐order differential equations. These equations are approximated by retaining only a finite number of terms and are then solved by approximating the derivatives using central differences. The results reveal an unusual phenomenon of negative lift occurring shortly after the start of motion. Various comparisons are made with previous theoretical and experimental results, including flow visualizations, to validate the solution methodology. Copyright © 2001 John Wiley & Sons, Ltd.  相似文献   

4.
A finite difference method is presented for solving the 3D Navier–Stokes equations in vorticity–velocity form. The method involves solving the vorticity transport equations in ‘curl‐form’ along with a set of Cauchy–Riemann type equations for the velocity. The equations are formulated in cylindrical co‐ordinates and discretized using a staggered grid arrangement. The discretized Cauchy–Riemann type equations are overdetermined and their solution is accomplished by employing a conjugate gradient method on the normal equations. The vorticity transport equations are solved in time using a semi‐implicit Crank–Nicolson/Adams–Bashforth scheme combined with a second‐order accurate spatial discretization scheme. Special emphasis is put on the treatment of the polar singularity. Numerical results of axisymmetric as well as non‐axisymmetric flows in a pipe and in a closed cylinder are presented. Comparison with measurements are carried out for the axisymmetric flow cases. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

5.
A depth‐averaged two‐dimensional model has been developed in the curvilinear co‐ordinate system for free‐surface flow problems. The non‐linear convective terms of the momentum equations are discretized based on the explicit–finite–analytic method with second‐order accuracy in space and first‐order accuracy in time. The other terms of the momentum equations, as well as the mass conservation equation, are discretized by the finite difference method. The discretized governing equations are solved in turn, and iteration in each time step is adopted to guarantee the numerical convergence. The new model has been applied to various flow situations, even for the cases with the presence of sub‐critical and supercritical flows simultaneously or sequentially. Comparisons between the numerical results and the experimental data show that the proposed model is robust with satisfactory accuracy. Copyright © 2000 John Wiley & Sons, Ltd.  相似文献   

6.
A finite difference scheme using a modified marker‐and‐cell (MAC) method is applied to investigate the characteristics of non‐linear wave motions and their interactions with a stationary three‐dimensional body inside a numerical wave tank (NWT). The Navier–Stokes (NS) equation is solved for two fluid layers, and the boundary values are updated at each time step by a finite difference time marching scheme in the frame of a rectangular co‐ordinate system. The viscous stresses and surface tension are neglected in the dynamic free‐surface condition, and the fully non‐linear kinematic free‐surface condition is satisfied by the density function method developed for two fluid layers. The incident waves are generated from the inflow boundary by prescribing a velocity profile resembling flexible flap wavemaker motions, and the outgoing waves are numerically dissipated inside an artificial damping zone located at the end of the tank. The present NS–MAC NWT simulations for a vertical truncated circular cylinder inside a rectangular wave tank are compared with the experimental results of Mercier and Niedzwecki, an independently developed potential‐based fully non‐linear NWT, and the second‐order diffraction computation. Copyright © 1999 John Wiley & Sons, Ltd.  相似文献   

7.
A numerical study is made of the unsteady two‐dimensional, incompressible flow past an impulsively started translating and rotating circular cylinder. The Reynolds number (Re) and the rotating‐to‐translating speed ratio (α) are two controlled parameters, and the influence of their different combinations on vortex shedding from the cylinder is investigated by the numerical scheme sketched below. Associated with the streamfunction (ψ)–vorticity (ω) formulation of the Navier–Stokes equations, the Poisson equation for ψ is solved by a Fourier/finite‐analytic, separation of variable approach. This approach allows one to attenuate the artificial far‐field boundary, and also yields a global conditioning on the wall vorticity in response to the no‐slip condition. As for the vorticity transport equation, spatial discretization is done by means of finite difference in which the convection terms are handled with the aid of an ENO (essentially non‐oscillatory)‐like data reconstruction process. Finally, the interior vorticity is updated by an explicit, second‐order Runge–Kutta method. Present computations fall into two categories. One with Re=103 and α≤3; the other with Re=104 and α≤2. Comparisons with other numerical or physical experiments are included. Copyright © 2000 John Wiley & Sons, Ltd.  相似文献   

8.
Based on the Bhatnagar–Gross–Krook (BGK) Boltzmann model equation, the unified simplified velocity distribution function equation adapted to various flow regimes can be presented. The reduced velocity distribution functions and the discrete velocity ordinate method are developed and applied to remove the velocity space dependency of the distribution function, and then the distribution function equations will be cast into hyperbolic conservation laws form with non‐linear source terms. Based on the unsteady time‐splitting technique and the non‐oscillatory, containing no free parameters, and dissipative (NND) finite‐difference method, the gas kinetic finite‐difference second‐order scheme is constructed for the computation of the discrete velocity distribution functions. The discrete velocity numerical quadrature methods are developed to evaluate the macroscopic flow parameters at each point in the physical space. As a result, a unified simplified gas kinetic algorithm for the gas dynamical problems from various flow regimes is developed. To test the reliability of the present numerical method, the one‐dimensional shock‐tube problems and the flows past two‐dimensional circular cylinder with various Knudsen numbers are simulated. The computations of the related flows indicate that both high resolution of the flow fields and good qualitative agreement with the theoretical, DSMC and experimental results can be obtained. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

9.
A finite element method for quasi‐incompressible viscous flows is presented. An equation for pressure is derived from a second‐order time accurate Taylor–Galerkin procedure that combines the mass and the momentum conservation laws. At each time step, once the pressure has been determined, the velocity field is computed solving discretized equations obtained from another second‐order time accurate scheme and a least‐squares minimization of spatial momentum residuals. The terms that stabilize the finite element method (controlling wiggles and circumventing the Babuska–Brezzi condition) arise naturally from the process, rather than being introduced a priori in the variational formulation. A comparison between the present second‐order accurate method and our previous first‐order accurate formulation is shown. The method is also demonstrated in the computation of the leaky‐lid driven cavity flow and in the simulation of a crossflow past a circular cylinder. In both cases, good agreement with previously published experimental and computational results has been obtained. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

10.
Computational fluid dynamics (CFD) codes that are able to describe in detail the dynamic evolution of the deformable interface in gas–liquid or liquid–liquid flows may be a valuable tool to explore the potential of multi‐fluid flow in narrow channels for process intensification. In the present paper, a computational exercise for co‐current bubble‐train flow in a square vertical mini‐channel is performed to investigate the performance of well‐known CFD codes for this type of flows. The computations are based on the volume‐of‐fluid method (VOF) where the transport equation for the liquid volumetric fraction is solved either by the methods involving a geometrical reconstruction of the interface or by the methods that use higher‐order difference schemes instead. The codes contributing to the present code‐to‐code comparison are an in‐house code and the commercial CFD packages CFX, FLUENT and STAR‐CD. Results are presented for two basic cases. In the first one, the flow is driven by buoyancy only, while in the second case the flow is additionally forced by an external pressure gradient. The results of the code‐to‐code comparison show that only the VOF method with interface reconstruction leads to physically sound and consistent results, whereas the use of difference schemes for the volume fraction equation shows some deficiencies. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

11.
In this paper we present a stress‐based least‐squares finite‐element formulation for the solution of the Navier–Stokes equations governing flows of viscous incompressible fluids. Stress components are introduced as independent variables to make the system first order. Continuity equation becomes an algebraic equation and is eliminated from the system with suitable modifications. The h and p convergence are verified using the exact solution of Kovasznay flow. Steady flow past a large circular cylinder in a channel is solved to test mass conservation. Transient flow over a backward‐facing step problem is solved on several meshes. Results are compared with that obtained using vorticity‐based first‐order formulation for both benchmark problems. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

12.
Time‐dependent incompressible Navier–Stokes equations are formulated in generalized non‐inertial co‐ordinate system and numerically solved by using a modified second‐order Godunov‐projection method on a system of overlapped body‐fitted structured grids. The projection method uses a second‐order fractional step scheme in which the momentum equation is solved to obtain the intermediate velocity field which is then projected on to the space of divergence‐free vector fields. The second‐order Godunov method is applied for numerically approximating the non‐linear convection terms in order to provide a robust discretization for simulating flows at high Reynolds number. In order to obtain the pressure field, the pressure Poisson equation is solved. Overlapping grids are used to discretize the flow domain so that the moving‐boundary problem can be solved economically. Numerical results are then presented to demonstrate the performance of this projection method for a variety of unsteady two‐ and three‐dimensional flow problems formulated in the non‐inertial co‐ordinate systems. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

13.
The numerical solution to the parabolized Navier–Stokes (PNS) and globally iterated PNS (IPNS) equations for accurate computation of hypersonic axisymmetric flowfields is obtained by using the fourth‐order compact finite‐difference method. The PNS and IPNS equations in the general curvilinear coordinates are solved by using the implicit finite‐difference algorithm of Beam and Warming type with a high‐order compact accuracy. A shock‐fitting procedure is utilized in both compact PNS and IPNS schemes to obtain accurate solutions in the vicinity of the shock. The main advantage of the present formulation is that the basic flow variables and their first and second derivatives are simultaneously computed with the fourth‐order accuracy. The computations are carried out for a benchmark case: hypersonic axisymmetric flow over a blunt cone at Mach 8. A sensitivity study is performed for the basic flowfield, including profiles and their derivatives obtained from the fourth‐order compact PNS and IPNS solutions, and the effects of grid size and numerical dissipation term used are discussed. The present results for the flowfield variables and also their derivatives are compared with those of other basic flow models to demonstrate the accuracy and efficiency of the proposed method. The present work represents the first known application of a high‐order compact finite‐difference method to the PNS schemes, which are computationally more efficient than Navier–Stokes solutions. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

14.
This study employed a direct numerical simulation (DNS) technique to contrast the plume behaviours and mixing of passive scalar emitted from line sources (aligned with the spanwise direction) in neutrally and unstably stratified open‐channel flows. The DNS model was developed using the Galerkin finite element method (FEM) employing trilinear brick elements with equal‐order interpolating polynomials that solved the momentum and continuity equations, together with conservation of energy and mass equations in incompressible flow. The second‐order accurate fractional‐step method was used to handle the implicit velocity–pressure coupling in incompressible flow. It also segregated the solution to the advection and diffusion terms, which were then integrated in time, respectively, by the explicit third‐order accurate Runge–Kutta method and the implicit second‐order accurate Crank–Nicolson method. The buoyancy term under unstable stratification was integrated in time explicitly by the first‐order accurate Euler method. The DNS FEM model calculated the scalar‐plume development and the mean plume path. In particular, it calculated the plume meandering in the wall‐normal direction under unstable stratification that agreed well with the laboratory and field measurements, as well as previous modelling results available in literature. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

15.
16.
This paper presents a numerical simulation of steady two‐dimensional channel flow with a partially compliant wall. Navier–Stokes equation is solved using an unstructured finite volume method (FVM). The deformation of the compliant wall is determined by solving a membrane equation using finite difference method (FDM). The membrane equation and Navier–Stokes equation are coupled iteratively to determine the shape of the membrane and the flow field. A spring analogy smoothing technique is applied to the deformed mesh to ensure good mesh quality throughout the computing procedure. Numerical results obtained in the present simulation match well with that in the literature. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

17.
In this study, an arbitrary Lagrangian–Eulerian (ALE) approach is incorporated with a mixed finite‐volume–element (FVE) method to establish a novel moving boundary method for simulating unsteady incompressible flow on non‐stationary meshes. The method collects the advantages of both finite‐volume and finite‐element (FE) methods as well as the ALE approach in a unified algorithm. In this regard, the convection terms are treated at the cell faces using a physical‐influence upwinding scheme, while the diffusion terms are treated using bilinear FE shape functions. On the other hand, the performance of ALE approach is improved by using the Laplace method to improve the hybrid grids, involving triangular and quadrilateral elements, either partially or entirely. The use of hybrid FE grids facilitates this achievement. To show the robustness of the unified algorithm, we examine both the first‐ and the second‐order temporal stencils. The accuracy and performance of the extended method are evaluated via simulating the unsteady flow fields around a fixed cylinder, a transversely oscillating cylinder, and in a channel with an indented wall. The numerical results presented demonstrate significant accuracy benefits for the new hybrid method on coarse meshes and where large time steps are taken. Of importance, the current method yields the second‐order temporal accuracy when the second‐order stencil is used to discretize the unsteady terms. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

18.
In this paper, the flow/acoustics splitting method for predicting flow‐generated noise is further developed by introducing high‐order finite difference schemes. The splitting method consists of dividing the acoustic problem into a viscous incompressible flow part and an inviscid acoustic part. The incompressible flow equations are solved by a second‐order finite volume code EllipSys2D/3D. The acoustic field is obtained by solving a set of acoustic perturbation equations forced by flow quantities. The incompressible pressure and velocity form the input to the acoustic equations. The present work is an extension of our acoustics solver, with the introduction of high‐order schemes for spatial discretization and a Runge–Kutta scheme for time integration. To achieve low dissipation and dispersion errors, either Dispersion‐Relation‐Preserving (DRP) schemes or optimized compact finite difference schemes are used for the spatial discretizations. Applications and validations of the new acoustics solver are presented for benchmark aeroacoustic problems and for flow over an NACA 0012 airfoil. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

19.
An algorithm based on the 4th‐order finite‐difference compact scheme is developed and applied in the direct numerical simulations of instabilities of channel flow. The algorithm is illustrated in the context of stream function formulation that leads to field equation involving 4th‐order spatial derivatives. The finite‐difference discretization in the wall‐normal direction uses five arbitrarily spaced points. The discretization coefficients are determined numerically, providing a large degree of flexibility for grid selection. The Fourier expansions are used in the streamwise direction. A hybrid Runge–Kutta/Crank–Nicholson low‐storage scheme is applied for the time discretization. Accuracy tests demonstrate that the algorithm does deliver the 4th‐order accuracy. The algorithm has been used to simulate the natural instability processes in channel flow as well as processes occurring when the flow is spatially modulated using wall transpiration. Extensions to three‐dimensional situations are suggested. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

20.
In this paper, five different algorithms are presented for the simulation of low Mach flows with large temperature variations, based on second‐order central‐difference or fourth‐order compact spatial discretization and a pressure projection‐type method. A semi‐implicit three‐step Runge–Kutta/Crank–Nicolson or second‐order iterative scheme is used for time integration. The different algorithms solve the coupled set of governing scalar equations in a decoupled segregate manner. In the first algorithm, a temperature equation is solved and density is calculated from the equation of state, while the second algorithm advances the density using the differential form of the equation of state. The third algorithm solves the continuity equation and the fourth algorithm solves both the continuity and enthalpy equation in conservative form. An iterative decoupled algorithm is also proposed, which allows the computation of the fully coupled solution. All five algorithms solve the momentum equation in conservative form and use a constant‐ or variable‐coefficient Poisson equation for the pressure. The efficiency of the fourth‐order compact scheme and the performances of the decoupling algorithms are demonstrated in three flow problems with large temperature variations: non‐Boussinesq natural convection, channel flow instability, flame–vortex interaction. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号