Dynamic analysis of baffled fuel‐storage tanks using the ALE finite element method

This paper is concerned with the parametric investigation on the structural dynamic response of moving fuel‐storage tanks with baffles. Since the structural dynamic behaviour is strongly coupled with interior liquid motion, the design of a fuel‐storage tank securing the structural stability becomes the appropriate suppression of the flow motion, which is in turn related to the baffle design. In order to numerically investigate the parametric dynamic characteristics of moving tanks, we employ the arbitrary Lagrangian–Eulerian (ALE) finite element method that is widely being used to deal with the problems with free surface, moving boundary, large deformation and interface contact. Following the theoretical and numerical formulations of fluid‐structure interaction problems, we present parametric numerical results of a cylindrical fuel‐storage tank moving with uniform vertical acceleration, with respect to the baffle number and location, and the inner‐hole diameter. Copyright © 2003 John Wiley & Sons, Ltd.     

A nonlinear ALE‐FCT scheme for non‐equilibrium reactive solute transport in moving domains

In this paper, we present a conservative, positivity‐preserving, high‐resolution nonlinear ALE‐flux‐corrected transport (FCT) scheme for reactive transport models in moving domains. The mathematical model is a convection–diffusion equation with a nonlinear flux equation on the moving channel wall. The reactive transport is assumed to have dominant Péclet and Damköhler numbers, a phenomenon that often results in non‐physical negative solutions. The scheme presented here is proven to be mass conservative in time and positive at all times for a small enough Δt. Reactive transport examples are simulated using this scheme for its validation, to show its convergence, and to compare it against the linear ALE‐FCT scheme. The nonlinear ALE‐FCT is shown to perform better than the linear ALE‐FCT schemes for large time steps. Copyright © 2014 John Wiley & Sons, Ltd.     

A fully discrete ALE method over untwisted time–space control volumes

In this paper, a fully discrete high‐resolution arbitrary Lagrangian–Eulerian (ALE) method is developed over untwisted time–space control volumes. In the framework of the finite volume method, 2D Euler equations are discretized over untwisted moving control volumes, and the resulting numerical flux is computed using the generalized Riemann problem solver. Then, the fluid flows between meshes at two successive time steps can be updated without a remapping process in the classic ALE method. This remapping‐free ALE method directly couples the mesh motion into a physical variable update to reflect the temporal evolution in the whole process. An untwisted moving mesh is generated in terms of the vorticity‐free part of the fluid velocity according to the Helmholtz theorem. Some typical numerical tests show the competitive performance of the current method. Copyright © 2016 John Wiley & Sons, Ltd.     

An ALE approach to mechano‐chemical processes in fluid–structure interactions

Mathematical modeling and simulation of fluid–structure interaction problems are in the focus of research already for a longer period. However, taking into account also chemical reactions, leading to structural changes, including changes of mechanical properties of the solid phase, is rather new but for many applications is highly important area. This paper formulates a model system for reactive flow and transport in a vessel system, the penetration of chemical substances into the solid wall. Inside the wall, reactions take place that lead to changes of volume and of the mechanical properties of the wall. Numerical algorithms are developed and used to simulate the dynamics of such a mechano‐chemical fluid–structure interaction problem. As a proof of concept scenario, plaque formation in blood vessels is chosen. The arbitrary Lagrangian Eulerian approach (ALE) is chosen to solve the systems numerically. Temporal discretization of the fully coupled monolithic model is accomplished by backward Euler scheme and spatial discretization by stabilized finite elements. The numerical approach is verified by numerical tests, and effective methods to maintain mesh qualities under large deformations are described. For realistic system parameters, the simulations show that the plaque formation in blood vessel is a long‐time effect. The time scale of the formation is in the simulation of comparable order as in reality. Copyright © 2016 John Wiley & Sons, Ltd.     

Some issues regarding spectral element meshes for moving journal bearing systems

This paper concerns the modelling of dynamically loaded journal bearing systems using a moving spectral element method. The moving grid method employed in this paper is the arbitrary Lagrangian–Eulerian (ALE) method. The ALE methodology is compared with a quasi‐Eulerian approach in the context of dynamically loaded journal bearings and the advantages of adopting the ALE formulation are highlighted. A comparison with the predictions of lubrication theory is also presented and the limitations of the lubrication approximation are demonstrated when inertial effects are significant. A comprehensive set of results is presented illustrating the salient features of the spectral element mesh generation schemes described in the paper and the way in which these impinge on the efficiency of the iterative solution of the discrete equations at each time step. Copyright © 2005 John Wiley & Sons, Ltd.     

非线性流体-刚体结构相互作用问题的一种数值模拟方法

给出了一种模拟非线性流体-刚体结构相互作用问题的数值方法．文中假定结构承受大的刚体运动,流体流动受非线性有粘或无粘的场方程支配并满足自由表面和两相耦合界面上的非线性边界条件,利用任意拉氏-欧氏（ALE）网格系统构造了数值模型．采用所探讨的多块数值格式,允许可动重造网格间有独立的相对运动,从而克服了流体网格与固体大运动匹配的困难．通过数值离散化,导出了描述非线性流固耦合动力学的数值方程并应用耦合迭代过程对其作了求解．通过算例,说明了所提出数值模型的应用．     

A NUMERICAL METHOD FOR SIMULATING NONLINEAR FLUID-RIGID STRUCTURE INTERACTION PROBLEMS

A numerical method for simulating nonlinear fluid-rigid structure interaction problems is developed. The structure is assumed to undergo large rigid body motions and the fluid flow is governed by nonlinear, viscous or non-viscous, field equations with nonlinear boundary conditions applied to the free surface and fluid-solid interaction interfaces. An Arbitrary-Lagrangian-Eulerian (ALE) mesh system is used to construct the numerical model. A multi-block numerical scheme of study is adopted allowing for the relative motion between moving overset grids, which are independent of one another. This provides a convenient method to overcome the difficulties in matching fluid meshes with large solid motions. Nonlinear numerical equations describing nonlinear fluid-solid interaction dynamics are derived through a numerical discretization scheme of study. A coupling iteration process is used to solve these numerical equations. Numerical examples are presented to demonstrate applications of the model developed.     

An ALE finite element method for a coupled Stefan problem and Navier–Stokes equations with free capillary surface

In this article, an ALE finite element method to simulate the partial melting of a workpiece of metal is presented. The model includes the heat transport in both the solid and liquid part, fluid flow in the liquid phase by the Navier–Stokes equations, tracking of the melt interface solid/liquid by the Stefan condition, treatment of the capillary boundary accounting for surface tension effects and a radiative boundary condition. We show that an accurate treatment of the moving boundaries is crucial to resolve their respective influences on the flow field and thus on the overall energy transport correctly. This is achieved by a mesh‐moving method, which explicitly tracks the phase boundary and makes it possible to use a sharp interface model without singularities in the boundary conditions at the triple junction. A numerical example describing the welding of a thin‐steel wire end by a laser, where all aforementioned effects have to be taken into account, proves the effectiveness of the approach.Copyright © 2012 John Wiley & Sons, Ltd.     

A modular,operator‐splitting scheme for fluid–structure interaction problems with thick structures

We present an operator‐splitting scheme for fluid–structure interaction (FSI) problems in hemodynamics, where the thickness of the structural wall is comparable to the radius of the cylindrical fluid domain. The equations of linear elasticity are used to model the structure, while the Navier–Stokes equations for an incompressible viscous fluid are used to model the fluid. The operator‐splitting scheme, based on the Lie splitting, separates the elastodynamics structure problem from a fluid problem in which structure inertia is included to achieve unconditional stability. We prove energy estimates associated with unconditional stability of this modular scheme for the full nonlinear FSI problem defined on a moving domain, without requiring any sub‐iterations within time steps. Two numerical examples are presented, showing excellent agreement with the results of monolithic schemes. First‐order convergence in time is shown numerically. Modularity, unconditional stability without temporal sub‐iterations, and simple implementation are the features that make this operator‐splitting scheme particularly appealing for multi‐physics problems involving FSI. Copyright © 2013 John Wiley & Sons, Ltd.     

A finite element formulation satisfying the discrete geometric conservation law based on averaged Jacobians

In this article, a new methodology for developing discrete geometric conservation law (DGCL) compliant formulations is presented. It is carried out in the context of the finite element method for general advective–diffusive systems on moving domains using an ALE scheme. There is an extensive literature about the impact of DGCL compliance on the stability and precision of time integration methods. In those articles, it has been proved that satisfying the DGCL is a necessary and sufficient condition for any ALE scheme to maintain on moving grids the nonlinear stability properties of its fixed‐grid counterpart. However, only a few works proposed a methodology for obtaining a compliant scheme. In this work, a DGCL compliant scheme based on an averaged ALE Jacobians formulation is obtained. This new formulation is applied to the θ family of time integration methods. In addition, an extension to the three‐point backward difference formula is given. With the aim to validate the averaged ALE Jacobians formulation, a set of numerical tests are performed. These tests include 2D and 3D diffusion problems with different mesh movements and the 2D compressible Navier–Stokes equations. Copyright © 2011 John Wiley & Sons, Ltd.     

Injection/suction boundary conditions for fluid–structure interaction simulations in incompressible flow

This paper presents the analysis of injection/suction boundary conditions in the context of the fluid–structure interactions simulation of the incompressible turbulent flow. First, the equations used in the modelling of the fluid and the structure are presented, as well as the numerical methods used in the corresponding solvers. Injection/suction boundary conditions are then presented with details of different implementation alternatives. Arbitrary Lagrangian–Eulerian (ALE) approach was also implemented in order to test the injection/suction boundary conditions. Numerical tests are performed where injection/suction boundary conditions are compared to ALE simulations. These tests include forced movement of the structure and two‐degrees‐of‐freedom structure model simulations. Copyright © 2002 John Wiley & Sons, Ltd.     

An SPH model for free surface flows with moving rigid objects

This paper presents a computational model for free surface flows interacting with moving rigid bodies. The model is based on the SPH method, which is a popular meshfree, Lagrangian particle method and can naturally treat large flow deformation and moving features without any interface/surface capture or tracking algorithm. Fluid particles are used to model the free surface flows which are governed by Navier–Stokes equations, and solid particles are used to model the dynamic movement (translation and rotation) of moving rigid objects. The interaction of the neighboring fluid and solid particles renders the fluid–solid interaction and the non‐slip solid boundary conditions. The SPH method is improved with corrections on the SPH kernel and kernel gradients, enhancement of solid boundary condition, and implementation of Reynolds‐averaged Navier–Stokes turbulence model. Three numerical examples including the water exit of a cylinder, the sinking of a submerged cylinder and the complicated motion of an elliptical cylinder near free surface are provided. The obtained numerical results show good agreement with results from other sources and clearly demonstrate the effectiveness of the presented meshfree particle model in modeling free surface flows with moving objects. Copyright © 2013 John Wiley & Sons, Ltd.     

On the immersed boundary‐lattice Boltzmann simulations of incompressible flows with freely moving objects

For simulating freely moving problems, conventional immersed boundary‐lattice Boltzmann methods encounter two major difficulties of an extremely large flow domain and the incompressible limit. To remove these two difficulties, this work proposes an immersed boundary‐lattice Boltzmann flux solver (IB‐LBFS) in the arbitrary Lagragian–Eulerian (ALE) coordinates and establishes a dynamic similarity theory. In the ALE‐based IB‐LBFS, the flow filed is obtained by using the LBFS on a moving Cartesian mesh, and the no‐slip boundary condition is implemented by using the boundary condition‐enforced immersed boundary method. The velocity of the Cartesian mesh is set the same as the translational velocity of the freely moving object so that there is no relative motion between the plate center and the mesh. This enables the ALE‐based IB‐LBFS to study flows with a freely moving object in a large open flow domain. By normalizing the governing equations for the flow domain and the motion of rigid body, six non‐dimensional parameters are derived and maintained to be the same in both physical systems and the lattice Boltzmann framework. This similarity algorithm enables the lattice Boltzmann equation‐based solver to study a general freely moving problem within the incompressible limit. The proposed solver and dynamic similarity theory have been successfully validated by simulating the flow around an in‐line oscillating cylinder, single particle sedimentation, and flows with a freely falling plate. The obtained results agree well with both numerical and experimental data. Copyright © 2016 John Wiley & Sons, Ltd.     

Computation of unsteady viscous flow around a locally flexible airfoil at low Reynolds number

A numerical method for fluid–structure interaction is presented for the analysis of unsteady viscous flow over a locally flexible airfoil. The Navier–Stokes equations are solved by ALE–CBS algorithm, coupling with a structural solver with large deformation. Following the validation of the method, a numerical example for the flight of micro-air vehicles at low Reynolds number is chosen for the computation. The coupling effect of flexible structure with different elastic stiffness on aerodynamic performance is demonstrated. A noticeable camber effect is induced by the deflection of the structure as the elastic stiffness of the structure goes smaller. Moreover, when the vibrating frequencies of the structure with smaller elastic stiffness have a close correlation with the shedding frequencies, the positive impact of the vibration of local flexible surface on the lift of the airfoil is highlighted, which results from the formation of the coherent vortices.     

Flow simulation on moving boundary‐fitted grids and application to fluid–structure interaction problems

We present a method for the parallel numerical simulation of transient three‐dimensional fluid–structure interaction problems. Here, we consider the interaction of incompressible flow in the fluid domain and linear elastic deformation in the solid domain. The coupled problem is tackled by an approach based on the classical alternating Schwarz method with non‐overlapping subdomains, the subproblems are solved alternatingly and the coupling conditions are realized via the exchange of boundary conditions. The elasticity problem is solved by a standard linear finite element method. A main issue is that the flow solver has to be able to handle time‐dependent domains. To this end, we present a technique to solve the incompressible Navier–Stokes equation in three‐dimensional domains with moving boundaries. This numerical method is a generalization of a finite volume discretization using curvilinear coordinates to time‐dependent coordinate transformations. It corresponds to a discretization of the arbitrary Lagrangian–Eulerian formulation of the Navier–Stokes equations. Here the grid velocity is treated in such a way that the so‐called Geometric Conservation Law is implicitly satisfied. Altogether, our approach results in a scheme which is an extension of the well‐known MAC‐method to a staggered mesh in moving boundary‐fitted coordinates which uses grid‐dependent velocity components as the primary variables. To validate our method, we present some numerical results which show that second‐order convergence in space is obtained on moving grids. Finally, we give the results of a fully coupled fluid–structure interaction problem. It turns out that already a simple explicit coupling with one iteration of the Schwarz method, i.e. one solution of the fluid problem and one solution of the elasticity problem per time step, yields a convergent, simple, yet efficient overall method for fluid–structure interaction problems. Copyright © 2005 John Wiley & Sons, Ltd.     

Numerical simulation of viscous flow interaction with an elastic membrane

A numerical fluid–structure interaction model is developed for the analysis of viscous flow over elastic membrane structures. The Navier–Stokes equations are discretized on a moving body‐fitted unstructured triangular grid using the finite volume method, taking into account grid non‐orthogonality, and implementing the SIMPLE algorithm for pressure solution, power law implicit differencing and Rhie–Chow explicit mass flux interpolations. The membrane is discretized as a set of links that coincide with a subset of the fluid mesh edges. A new model is introduced to distribute local and global elastic effects to aid stability of the structure model and damping effects are also included. A pseudo‐structural approach using a balance of mesh edge spring tensions and cell internal pressures controls the motion of fluid mesh nodes based on the displacements of the membrane. Following initial validation, the model is applied to the case of a two‐dimensional membrane pinned at both ends at an angle of attack of 4° to the oncoming flow, at a Reynolds number based on the chord length of 4 × 10³. A series of tests on membranes of different elastic stiffness investigates their unsteady movements over time. The membranes of higher elastic stiffness adopt a stable equilibrium shape, while the membrane of lowest elastic stiffness demonstrates unstable interactions between its inflated shape and the resulting unsteady wake. These unstable effects are shown to be significantly magnified by the flexible nature of the membrane compared with a rigid surface of the same average shape. Copyright © 2007 John Wiley & Sons, Ltd.     

Unified one‐fluid formulation for incompressible flexible solids and multiphase flows: Application to hydrodynamics using the immersed structural potential method (ISPM)

In this paper, we present a two‐dimensional computational framework for the simulation of fluid‐structure interaction problems involving incompressible flexible solids and multiphase flows, further extending the application range of classical immersed computational approaches to the context of hydrodynamics. The proposed method aims to overcome shortcomings such as the restriction of having to deal with similar density ratios among different phases or the restriction to solve single‐phase flows. First, a variation of classical immersed techniques, pioneered with the immersed boundary method (IBM), is presented by rearranging the governing equations, which define the behaviour of the multiple physics involved. The formulation is compatible with the “one‐fluid” formulation for two‐phase flows and can deal with large density ratios with the help of an anisotropic Poisson solver. Second, immersed deformable structures and fluid phases are modelled in an identical manner except for the computation of the deviatoric stresses. The numerical technique followed in this paper builds upon the immersed structural potential method developed by the authors, by adding a level set–based method for the capturing of the fluid‐fluid interfaces and an interface Lagrangian‐based meshless technique for the tracking of the fluid‐structure interface. The spatial discretisation is based on the standard marker‐and‐cell method used in conjunction with a fractional step approach for the pressure/velocity decoupling, a second‐order time integrator, and a fixed‐point iterative scheme. The paper presents a wide d range of two‐dimensional applications involving multiphase flows interacting with immersed deformable solids, including benchmarking against both experimental and alternative numerical schemes.     

A numerical study of the propulsive efficiency of a flapping hydrofoil

A computational fluid dynamics study of the swimming efficiency of a two‐dimensional flapping hydrofoil at a Reynolds number of 1100 is presented. The model accounts fully for viscous effects that are particularly important when flow separation occurs. The model uses an arbitrary Lagrangian–Eulerian (ALE) method to track the moving boundaries of oscillatory and flapping bodies. A parametric analysis is presented of the variables that affect the motion of the hydrofoil as it moves through the flow along with flow visualizations in an attempt to quantify and qualify the effect that these variables have on the performance of the hydrofoil. Copyright © 2003 John Wiley & Sons, Ltd.     

An embedded boundary framework for compressible turbulent flow and fluid–structure computations on structured and unstructured grids

The finite volume method with exact two‐phase Riemann problems (FIVER) is a two‐faceted computational method for compressible multi‐material (fluid–fluid, fluid–structure, and multi‐fluid–structure) problems characterized by large density jumps, and/or highly nonlinear structural motions and deformations. For compressible multi‐phase flow problems, FIVER is a Godunov‐type discretization scheme characterized by the construction and solution at the material interfaces of local, exact, two‐phase Riemann problems. For compressible fluid–structure interaction (FSI) problems, it is an embedded boundary method for computational fluid dynamics (CFD) capable of handling large structural deformations and topological changes. Originally developed for inviscid multi‐material computations on nonbody‐fitted structured and unstructured grids, FIVER is extended in this paper to laminar and turbulent viscous flow and FSI problems. To this effect, it is equipped with carefully designed extrapolation schemes for populating the ghost fluid values needed for the construction, in the vicinity of the fluid–structure interface, of second‐order spatial approximations of the viscous fluxes and source terms associated with Reynolds averaged Navier–Stokes (RANS)‐based turbulence models and large eddy simulation (LES). Two support algorithms, which pertain to the application of any embedded boundary method for CFD to the robust, accurate, and fast solution of FSI problems, are also presented in this paper. The first one focuses on the fast computation of the time‐dependent distance to the wall because it is required by many RANS‐based turbulence models. The second algorithm addresses the robust and accurate computation of the flow‐induced forces and moments on embedded discrete surfaces, and their finite element representations when these surfaces are flexible. Equipped with these two auxiliary algorithms, the extension of FIVER to viscous flow and FSI problems is first verified with the LES of a turbulent flow past an immobile prolate spheroid, and the computation of a series of unsteady laminar flows past two counter‐rotating cylinders. Then, its potential for the solution of complex, turbulent, and flexible FSI problems is also demonstrated with the simulation, using the Spalart–Allmaras turbulence model, of the vertical tail buffeting of an F/A‐18 aircraft configuration and the comparison of the obtained numerical results with flight test data. Copyright © 2014 John Wiley & Sons, Ltd.