Study of the reaction Fe(CN)4(bpy)2− + S2O82− in Sulfobetaine Aqueous Micellar Solutions

The reaction Fe(CN)₄(bpy)^2? + S₂O₈^2? has been studied in aqueous micellar solutions of N‐tetradecyl‐N,N‐dimethyl‐3‐ammonio‐1‐propanesulfonate, SB3‐14. The influence of changes in the surfactant concentration as well as in the peroxodisulfate ions concentration on k_obs was investigated. Spectroscopic and conductivity measurements have given information about the distribution of both anionic reagents between the aqueous and micellar pseudophases of the SB3‐14 micellar solutions. A discussion about the adequacy of various equations based on the pseudophase model to rationalize kinetic micellar effects for anion‐anion reactions in sulfobetaine micellar solutions has been done. © 2001 John Wiley & Sons, Inc. Int J Chem Kinet 33: 225–231, 2001     

Study of the reaction methyl 4‐nitrobenzene‐sulfonate + Cl− in mixed hexadecyltrimethyl‐ammonium chloride‐triton X‐100 micellar solutions

The reaction methyl 4‐nitrobenzenesulfonate + Cl^? was studied in hexadecyltrimethylammonium chloride (CTAC) in the absence and presence of 0.1 M NaCl, as well as in mixed CTAC/Triton X‐100 (polyoxyethylene(9.5)octylphenyl ether) aqueous micellar solutions with CTAC molar fractions of 0.9, 0.8, 0.7, and 0.6. Conductivity measurements were used to obtain critical micellar concentrations and micellar ionization degrees of the various micellar reaction media. From these data, thermodynamic information on the cationic/nonionic mixed micellar solutions was obtained. Micellar effects on the observed rate constant were explained by pseudophase kinetic models. The estimated second‐order rate constants in the micellar pseudophase of the different micellar reaction media showed that pure CTAC and mixed CTAC/Triton X‐100 micelles, at the high cationic surfactant molar fractions studied, provide reaction sites of similar characteristics at the interfacial region. This was in agreement with previous structural studies carried out on mixed CTAC/Triton X‐100 micellar solutions. © 2002 Wiley Periodicals, Inc. Int J Chem Kinet 35: 45–51, 2003     

Study of the ligand substitution reaction Fe (CN)5H2O3− + pyrazine in micellar solutions

The ligand substitution reaction Fe(CN)₅H₂O³⁻ + pyrazine → Fe(CN)₅ pyrazine³⁻ + H₂O has been studied in sodium dodecyl sulfate SDS, hexadecyltrimethylammonium bromide, CTAB, and salt aqueous solutions at 298.2 K. Kinetics were studied in dilute and concentrated salt solutions and in SDS and CTAB solutions at surfactant concentrations below and above the critical micelle concentration. Experimental results show that salt effects can be explained by considering the interaction between the cations present in the working media which come from the background electrolyte, and the Fe(CN)₅H₂O³⁻ species in the vicinity of the cyanide ligands. This interaction makes the release of the aqua ligand from the inner-coordination shell of the iron(II) complex to the bulk more difficult resulting in a decrease of the reaction rate when the electrolyte concentration increases. Kinetic data in surfactant solutions show that not only micellized surfactants are operative kinetically, but also nonmicellized surfactants are influencing the reactivity. © 1997 John Wiley & Sons, Inc. Int J Chem Kinet 29: 377–384, 1997     

Micellar medium effects on the hydrolysis of phenyl chloroformate in ionic,zwitterionic, nonionic,and mixed micellar solutions

The spontaneous hydrolysis of phenyl chloroformate was studied in various anionic, nonionic, zwitterionic, and cationic aqueous micellar solutions, as well as in mixed anionic–nonionic micellar solutions. In all cases, an increase in the surfactant concentration results in a decrease in the reaction rate and micellar effects were quantitatively explained in terms of distribution of the substrate between water and micelles and the first‐order rate constants in the aqueous and micellar pseudophases. A comparison of the kinetic data in nonionic micellar solutions to those in anionic and zwiterionic micellar solutions makes clear that charge effects of micelles is not the only factor responsible for the variations in the reaction rate. Depletion of water in the interfacial region and its different characteristics as compared to bulk water, the presence of high ionic concentration in the Stern layer of ionic micelles, and differences in the stabilization of the initial state and the transition state by hydrophobic interactions with surfactant tails can also influence reactivity. The different deceleration of the reaction observed in the various micellar solutions studied was discussed by considering these factors. Synergism in mixed‐micellar solutions is shown through the kinetic data obtained in these media. © 2002 Wiley Periodicals, Inc. Int J Chem Kinet 34: 445–451, 2002     

Activity of α‐Chymotrypsin in Cationic and Nonionic Micellar Media: Ultraviolet and Fluorescence Spectroscopic Approach

α‐Chymotrypsin (α‐CT) activity was measured in aqueous buffer with the following alkyltriphenylphosphonium bromide surfactants in the series cetyl, tetradecyl, and dodecyl as a tail length. For the sake of comparison with mixed micellar investigation on activity of α‐CT, cationic cetyltriphenylphosphonium bromide (CTPB) and nonionic surfactant Triton X‐100, Brij‐56, Brij‐35, Tween 20, and Igepal Co‐210 have been used. The p‐nitrophenyl acetate (PNPA) hydrolysis rate was determined at the surfactant concentration of both cationic and mixed micellar systems by a UV–vis spectrophotometer. The catalytic reaction follows the Michaelis–Menten mechanism, and the catalytic efficiency (k_cat/K_M) was evaluated for both homogeneous and mixed‐micellar media. The maximum catalytic efficiency was observed at 5 mM concentration of CTPB, but the highest catalytic efficiency, 572 M^?1 s^?1, was measured in the presence of mixed micellar (7.5 mM CTPB + 2.5 mM Tween‐20). The fluorescence (FL) spectra showed the differences of α‐CT conformations in the presence of cationic surfactants. The FL results suggest that the influence of cationic surfactant on proteolysis arises from the interaction with the α‐CT. The binding constant, k_sv, of α‐CT with cationic aggregates was determined in the buffer using the Stern–Volmer equation by the fluorescence spectroscopic approach.     

Role of the Surfactant Structure in the Behavior of Hydrophobic Ionic Liquids within Aqueous Micellar Solutions

The behavior of an ionic liquid (IL) within aqueous micellar solutions is governed by its unique property to act as both an electrolyte and a cosolvent. The influence of the surfactant structure on the properties of aqueous micellar solutions of zwitterionic SB‐12, nonionic Brij‐35 and TX‐100, and anionic sodium dodecyl sulfate (SDS) in the presence of the “hydrophobic” IL 1‐butyl‐3‐methylimidazolium hexafluorophosphate ([bmim][PF₆]) is assessed along with the possibility of forming oil‐in‐water microemulsions in which the IL acts as the “oil” phase. The solubility of [bmim][PF₆] within aqueous micellar solutions increases with increasing surfactant concentration. In contrast to anionic SDS, the zwitterionic and nonionic surfactant solutions solubilize more [bmim][PF₆] at higher concentrations and the average aggregate size remains almost unchanged. The formation of IL‐in‐water microemulsions when the concentration of [bmim][PF₆] is above its aqueous solubility is suggested for nonionic Brij‐35 and TX‐100 aqueous surfactant solutions.     

Kinetics of the interaction of ninhydrin with the [Ni(II)–histidine]+ complex in water and surfactant micelles

Kinetics of the condensation reaction of ninhydrin and the [Ni(II)–histidine]⁺ complex has been studied spectrophotometrically at pH 5.0, both in aqueous and aqueous–cationic micelles of cetyltrimethylammonium bromide (CTAB). The same product was obtained in both the media. The results obtained in the micellar medium are treated quantitatively in terms of the kinetic pseudo‐phase and Piszkiewicz models. The rate constants, binding constants with the micelles, and the index of cooperativity have been evaluated. On the basis of observed data a possible mechanism has been proposed. The same product was obtained in nonionic micelles of TX‐100, but the studies were hampered due to the appearance of turbidity, whereas anionic micelles of sodium dodecyl sulphate did not catalyze the reaction. © 1999 John Wiley & Sons, Inc. Int J Chem Kinet 31: 47–54, 1999     

Micellar effect on the electron transfer reaction of chromium(V) ion with organic sulfides

The rate of electron transfer from organic sulfides to [Cr^V(ehba)₂]⁻ (ehba-2-ethyl-2-hydroxy butyric acid) decreases with a decrease in the polarity of the medium. The anionic surfactant, SDS and the cationic surfactant, CTAB have different effects on the kinetics of this reaction. The micellar inhibition observed in the presence of SDS is probably due to the decrease in the polarity and the electrostatic repulsion faced by the anionic oxidant from the anionic micelle and the partition of the hydrophobic substrate between the aqueous and micellar phases. The micellar catalysis in the presence of CTAB is attributed to the increase in the concentration of both reactants in the micellar phase. This micellar catalysis is observed to offset the retarding effects of the less polar micellar medium and the unfavorable charge-charge interaction between the + charge developed on S center in the transition state and the cationic micelle. This catalysis is contrary to the enormous micellar inhibition observed with IO₄⁻, HSO₅⁻ and HCO₄⁻ oxidation of organic sulfides.     

Study of the reaction of methyl 4‐nitrobenzenesulfonate and Br− in water–glycerol cationic micellar solutions

The reaction of methyl 4‐nitrobenzenesulfonate (MNB) and Br^? has been studied in water–glycerol (GLY) alkyltrimethylammonium bromide micellar solutions, with the weight percentage of glycerol up to 50%. A pseudophase kinetic model was used for quantitatively discussing the kinetic data. Results showed that the equilibrium‐binding constant for the organic substrate molecules to the cationic micelles decreases upon increasing the amount of glycerol present in the micellar reaction media. The second‐order rate constant of the reaction in the micellar pseudophase is practically independent of wt% of GLY. Similar results were found in other water–organic solvent alkyltrimethylammonium bromide micellar solutions for the same process. However, the dependence of the reaction rate, for a given surfactant concentration, on the wt% of organic solvent is weaker for glycerol than for the other organic solvents. This was explained by considering that the cationic micellar ionization degree is nearly independent of wt% GLY. As a consequence, bromide ions concentration in the interfacial region (the reaction site) does not change by varying wt% of GLY. © 2008 Wiley Periodicals, Inc. Int J Chem Kinet 40: 845–582, 2008     

Kinetics of alkaline fading of methyl violet in micellar solutions of surfactants: Comparing Piszkiewicz's,Berezin's,and pseudophase ion-exchange models

The micellar effect of surfactants of various types on the rate of the reaction between methyl violet and hydroxide ion is studied. The absorption spectra show that the cation of methyl violet is bound by micelles of all types at proper concentrations of surfactants. The observed rate constant in micellar systems containing nonionic Brij-35, zwitterionic 3-(dimethyldodecylammonio)-propanesulfonate, cationic cetyltrimethylammonium bromide and hydroxide surfactants is higher, whereas in solutions of the anionic surfactant sodium dodecylsulfate is lower than that one in the surfactant-free system. Piszkiewicz's, Berezin's, and pseudophase ion-exchange models of the kinetic micellar effect are used for the treatment of the dependences of the above-mentioned constants on the surfactant concentration. The values of the corresponding kinetic parameters are compared and discussed. The influence of nonionic, zwitterionic, and anionic micelles on the reaction rate is discussed on the basis of medium and concentration kinetic effects. The character of the cationic micelles effect is somewhat paradoxical. Although the observed pseudo–first-order reaction rate constant substantially increases in the presence of such micelles, the second order-rate constant in these micelles is lower than the corresponding value in surfactant-free aqueous solution. As a possible explanation, the decrease in the reactivity of the HO^– ions is proposed, owing to their electrostatic association with the cationic headgroups (“diverting effect”).     

Influence of Amine‐Based Cationic Gemini Surfactants on Catalytic Activity of α‐Chymotrypsin

The α‐chymotrypsin activity was tested in aqueous media with the presence of novel cationic amine–based gemini surfactant, with different spacer chain lengths and head group size, and also compared with the cationic cetyltrimethylammonium bromide (CTAB) and cetyltriphenylphosphonium bromide (CTPB) surfactants and aqueous buffer only. The p‐nitrophenyl acetate (PNPA) hydrolysis rate was monitored in the presence of the surfactant concentration at 30°C. Most of these gemini surfactants gave higher catalytic activity as compared to cationic CTAB and CTPB. The highest superactivity was measured in the presence of gemini 16‐12‐16, [dodecanediyl‐1,12‐bis(cetyldimethylammonium bromide)] surfactant at pH 7.5. The catalytic reaction follows the Michaelis–Menten mechanism. The catalytic rate constants, k_cat, show the same profile that the catalytic affinity; K_M being enhanced with increasing space chain length. The results are favorable for considering that the amine‐based gemini surfactant influences more than both the aqueous and cationic micellar media.     

Substituent effects on enol nitrosation of 1,3‐diketones

The keto–enol tautomerism of 3‐chloro‐pentane‐2,4‐dione (ClPD) was studied in aqueous micellar solutions of cationic, anionic, and nonionic surfactants. The enol of ClPD tautomerizes rapidly in water to the equilibrium proportions of the keto form, K_E=0.55; whereas the keto–enol conversion of 3‐ethyl‐pentane‐2,4‐dione (EPD) is a much slower reaction than the enol nitrosation. Kinetics of enol –nitrosation of both ClPD and EPD in aqueous acid medium using nitrous acid shows first‐order dependence upon [ketone] and linear or curve relationships of the observed rate constant, k_o, as a function of [nitrite] or [H⁺]; the observed behavior depends on the molecular structure of diketone and varies with the experimental conditions. The reaction is strongly catalyzed by Cl^?, Br^?, or SCN^?, and the observed rate constant shows a curve dependence on [Br^?] or [SCN^?], which is more pronounced at high acidity. The results are consistent with a reaction mechanism in which the nitrosation occurs initially on the enol–oxygen and releasing a proton to form a chelate–nitrosyl complex intermediate in steady state. Fine differences on the mechanistic spectrum of enols nitrosation are considered on the basis of the molecular structure of the diketone. © 2012 Wiley Periodicals, Inc. Int J Chem Kinet 44: 668–679, 2012     

Micellar effects on the rates of the condensation reaction between copper(II)‐histidine complex and ninhydrin

The kinetics of formation of N‐diketohydrindylidenehistidinatocopper(II) complex has been investigated in the presence of cationic cetyltrimethylammonium bromide (CTAB) surfactant in aqueous medium (pH = 5.0). Similarly in aqueous solution, the reaction followed irreversible first‐order kinetics with respect to [Ninhydrin]. Although the reaction mechanism remained unaltered by micelles, a typical k_ψ‐[CTAB] profile was observed, that is, with a progressive increase in [CTAB], the reaction rate increased, reached a maximum value, and then decreased. The results are treated quantitatively in terms of the kinetic pseudo‐phase model. Activation parameters were also evaluated and a large decrease in ΔS^# shows the formation of a well‐structured activated complex. It was found that anionic sodium dodecyl sulphate (SDS) and non‐ionic Triton X‐100 (TX‐100) surfactants have no effect on the reaction. © 1999 John Wiley & Sons, Inc. Int J Chem Kinet 31: 729–736, 1999     

Spectrophotometric Determination of Acidity Constants of 4‐(2‐Pyridylazo) Resorcinol in Various Micellar Media Solutions

Dissociation equilibria of 4‐(2‐pyridylazo) resorcinol (PAR) in aqueous micellar solutions were determined spectrophotometrically at 25 °C and at the constant ionic strength I = 0.1 M KNO₃. For this purpose, the effect of nonionic (Brij‐35, Triton X‐100, Triton X‐114, Triton X‐405), and anionic (SDS) surfactants on the absorption spectra of PAR at different pH values was studied. Results show that the pK_a values and pure spectra of each species of PAR are influenced by percentages of a neutral and an anionic surfactant such as Brij‐35, Triton X‐100, Triton X‐114, Triton X‐405 and SDS, respectively, added to the solution of this reagent.     

Salt Effects on Aqueous Cationic/Anionic Surfactant Two‐Phase Regions

The influence of added salts (KCl, NaF, NaCl, NaBr, Na₂SO₄, Na₃PO₄) on aqueous cetyltrimethylammonium bromide (CTAB)/sodium dodecyl sulfonate (AS) two‐phase regions were studied. For KCl, the concentration dependence of salt effect on aqueous two‐phase regions was investigated. When brine substitutes pure water as a solvent, the positions of aqueous two‐phase regions in the phase diagram change. The results indicate that for aqueous two‐phase systems with excess anionic surfactant (ATPS‐A), the salt effect was mainly dependent on the cationic inorganic counterions, whereas for aqueous two‐phase systems with excess cationic surfactant (ATPS‐C), the salt effect was mainly dependent on the anionic inorganic counterions. The shift of aqueous two‐phase region is strengthened following the Hofmeister series. All the experiments were performed at 318.15 K.     

Synthesis and surfactochromicity of 1,4‐diketopyrrolo[3,4‐c]pyrrole(DPP)‐based anionic conjugated polyelectrolytes

Two novel anionic conjugated copolyelectrolytes PSDPPPV and PSDPPPE were synthesized via Heck/Sonogashira coupling reactions and characterized by FT‐IR, ¹H NMR, UV‐vis, and PL spectroscopy. The two polymers are respectively constituted of 2,5‐diethoxy‐1,4‐phenyleneethynylene (DPV) and 2,5‐diethoxy‐1,4‐phenyleneethynylene (DPE) with 1,4‐diketo‐2,5‐bis(4‐sulfonylbutyl)‐3,6‐diphenylpyrrolo[3,4‐c]pyrrole (SDPP) which is a novel water soluble diketopyrrolopyrrole derivative. PSDPPPV and PSDPPPE show broad absorption band in visible region and they exhibit strong fluorescence quenching in aqueous solution. The fluorescence of their aqueous solutions can be enhanced in the presence of cationic surfactant or polymer nonionic surfactant. Fluorescence enhancement by introduction of polyvinylpyrrolidone (PVP) shows linear response. This result provides a controllable method to increase fluorescence intensity of dipyrrolopyrrole‐based conjugate polyelectrolytes in aqueous phase. The optical properties suggested that PSDPPPV and PSDPPPE which are negatively charged conjugated polymers can assemble with positively charged photovoltaic materials to form ionic photoactive layer. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 739–751     

Effect of the Media on the Quantum Yield of Singlet Oxygen (O2(1Δg)) Production by 9H‐Fluoren‐9‐one: Microheterogeneous Systems

The quantum yield (Φ_Δ) of singlet oxygen (O₂(¹Δ_g) production by 9H‐fluoren‐9‐one (FLU) is very sensitive to the nature of the solvent (0.02 in a highly polar and protic solvent, such as MeOH, to 1.0 in apolar solvents). This high sensitivity has been used for probing the interaction of FLU with micellar media and microemulsions based on anionic (sodium dodecyl sulfate, SDS; bis‐(2‐ethylhexyl)sodium sulfosuccinate, AOT), cationic (cetyltrimethylammonium chloride, CTAC) and nonionic (Triton X‐100, TX) surfactants. Values of Φ_Δ of FLU vary in a wide range (0.05–1.0) in both microheterogeneous media and neat solvent, and provide information on the microenvironment of FLU, i.e., on its localization within organized media. In ionic and nonionic micellar media, as well as in four‐component microemulsions, FLU is, to various extents, exposed to solvation by the polar and protic components of the microheterogeneous systems (water and/or butan‐1‐ol) in the micellar interfacial region (Φ_Δ=0.05–0.30). In contrast, in AOT reverse micelles (consisting of AOT as surfactant, cyclohexane as hydrophobic component, and water), FLU is located in the hydrophobic continuous pseudophase, and is totally separated from the micellar water pools (Φ_Δ≈1.0).     

Kinetics of the reaction of methyl 4‐nitrobenzenesul‐fonate + Br− in ethanol amine based surfactants

The kinetics of the reaction of methyl 4‐nitrobenzenesulfonate + Br^? ions has been studied in ethanol amine based (alkyldimethylethanolammonium bromide and alkyldiethylethanolammonium bromide) surfactant solutions. The observed first‐order rate constants increase monotonically with surfactant concentration, with hydrophobic chain length and with head group bulk in a manner similar to other quaternary ammonium surfactants. The results were analyzed using the pseudophase model of micellar rate effects in conjunction with a Langmuir form to describe micellar binding of bromide ion. An attempt to estimate activation parameters of the reaction from temperature variance of micellar pseudophase rate constants has also been made. © 2006 Wiley Periodicals, Inc. Int J Chem Kinet 38: 303–308, 2006     

Study of Ligand Substitution Reactions at Pentacyanoferrates(II) in Aqueous Salt and Micellar Solutions

The ligand substitution reactions Fe(CN)(5)(4-(t)bupy)(3-) + 4-CNpy and Fe(CN)(5)(4-(t)bupy)(3-) + pzCO(2)(-) (4-(t)Bupy = 4-tert-butylpyridine; 4-CNpy = 4-cyanopyridine; pzCO(2)(-) = pyrazinecarboxylate) were studied in several aqueous salt and micellar solutions. Kinetic data in aqueous solutions showed that the two processes follow a dissociative mechanism, D, and the dependence of the first-order rate constants on [salt] on electrolyte aqueous solutions allow the estimation of the activation volumes corresponding to both reactions. Under true first-order conditions no kinetic micellar effects were found in anionic (SDS) and nonionic (Triton X-100) aqueous micellar solutions. In cationic micellar solutions (CTAB, CTAC, and TTAB) small kinetic micellar effects were found. These were related to the different ionic concentrations and the different polarity and structure of the Stern layer surrounding the cationic micellar aggregates, where the reactions take place, with respect to pure water. Copyright 2000 Academic Press.     

Kinetics of colloidal MnO<Subscript>2</Subscript> reduction by L-arginine in absence and presence of surfactants

The kinetics of the oxidation of L-arginine by water-soluble form of colloidal manganese dioxide has been studied using visible spectrophotometry in aqueous as well as micellar media. To obtain the rate constants as functions of [L-arginine], [MnO₂] and [HClO₄], pseudo-first-order conditions are maintained in each kinetic run. The first-order-rate is observed with respect to [MnO₂], whereas fractional-order-rates are determined in both [L-arginine] and [HClO₄]. Addition of sodium pyrophosphate and sodium fluoride enhanced the rate of the reaction. The effect of externally added manganese(II) sulphate is complex. It is not possible to predict the exact dependence of the rate constant on manganese(II) concentration, which has a series of reactions with other reactants. The anionic surfactant SDS neither catalyzed nor inhibited the oxidation reaction, while in presence of cationic surfactant CTAB the reaction is not possible due to flocculation of reaction mixture. The reaction is catalyzed by the nonionic surfactant TX-100 which is explained in terms of the mathematical model proposed by Tuncay et al. Activation parameters have been evaluated using Arrhenius and Eyring equations. On the basis of observed kinetic results, a probable mechanism for the reaction has been proposed which corresponds to fast adsorption of the reductant and hydrogen ion on the surface of colloidal MnO₂.