Sensitive sandwich immunoassay based on single particle mode inductively coupled plasma mass spectrometry detection

A sensitive sandwich type immunoassay has been proposed with the detection by inductively coupled plasma mass spectrometry (ICP-MS) in a single particle mode (time resolved analysis). The signal induced by the flash of ions (¹⁹⁷Au⁺) due to the ionization of single Au-nanoparticle (Au-NP) label in the plasma torch can be measured by the mass spectrometer. The frequency of the transient signals is proportional to the concentration of Au-NPs labels. Characteristics of the signals obtained from Au-NPs of 20, 45 and 80 nm in diameters were discussed. The analytical figures for the determination of Au-labeled IgG using ICP-MS in conventional integral mode and single particle mode were compared in detail. Rabbit-anti-human IgG was used as a model analyte in the sandwich immunoassay. A detection limit (3σ) of 0.1 ng mL⁻¹ was obtained for rabbit-anti-human IgG after immunoreactions, with a linear range of 0.3-10 ng mL⁻¹ and a RSD of 8.1% (2.0 ng mL⁻¹). Finally, the proposed method was successfully applied to spiked rabbit-anti-human IgG samples and rabbit-anti-human serum samples. The method resulted to be a highly sensitive ICP-MS based sandwich type immunoassay.     

Element-tagged immunoassay with inductively coupled plasma mass spectrometry for multianalyte detection

The multianalyte immunoassay approach is currently attracting increasing attention due to its high sample throughput, short assay time, low sample consumption and reduced overall cost per assay. This paper reviews progress in the field of multianalyte immunoassays using inductively coupled plasma mass spectrometry, as well as applications of this approach in different fields. Examples related to the combination of protein microarray technology with the multitag approach of the immunoassay ICP-MS method and to the use of ICP-MS in the field of imaging are described. A novel strategy that involves tagging antibodies for ICP-MS detection in sensitive multitag bioassays is also presented. Finally, the outlook for this promising technique is discussed.     

基于氧反应模式的ICP-MS/MS高灵敏测定食品中痕量镍

A new strategy for the determination of trace Ni in food by inductively coupled plasma tandem mass spectrometry （ICP-MS/MS） was proposed. The food samples were analyzed by ICP-MS/MS after microwave digestion. In the MS/MS mode,O2and NH3/He were used as reaction gases, respectively, while Ni+was used to undergo mass shift reactions with reaction gases to eliminate spectral interference. Although the spectral interference can be eliminated to near the background level in both reaction modes, using O2as a reaction gas in the MS/MS mode to convert Ni+into NiO+could provide a higher sensitivity and a lower limit of detection （LOD）. The mass shift reaction mechanism of Ni+and O2was revealed through theoretical calculation and experimental verification. Under the optimized conditions, the LOD of Ni was as low as 11.5 ng/L. The accuracy of the method was evaluated by analyzing the standard reference materials and comparing them with the national standard GB 5009.138-2017 method. The results showed that at the 95% confidence level, there was no significant difference between the analytical results of this method and those of the national standard method, and the relative standard deviations （RSDs） were 2.8%-4.7%. The measured values of two analytical methods were basically consistent with the certified values of standard reference materials. © 2023 The Authors.     

Estimation of detection limits in inductively coupled plasma mass spectrometry

The theoretical estimation of the detection limits in inductively coupled plasma mass spectrometry has been investigated. This calculation includes significant parameters of the ICP source and mass spectrometer. The calculated values show generally good agreement with experimental results. The development of a mathematical relationship may be useful for evaluation of instrumental parameters and sample introduction techniques. Received: 30 January 1998 / Revised: 9 June 1998 / Accepted: 16 June 1998     

Estimation of detection limits in inductively coupled plasma mass spectrometry

The theoretical estimation of the detection limits in inductively coupled plasma mass spectrometry has been investigated. This calculation includes significant parameters of the ICP source and mass spectrometer. The calculated values show generally good agreement with experimental results. The development of a mathematical relationship may be useful for evaluation of instrumental parameters and sample introduction techniques.     

Elemental speciation by chromatographic separation with inductively coupled plasma mass spectrometry detection

Separation techniques coupled to inductively coupled plasma mass spectrometry (ICP-MS) is reviewed. ICP-MS technique is described briefly. Coupling of the different separation techniques are described, together with the most common applications used for each technique that has been described in the literature. An overview for the future of separation techniques coupled to ICP-MS with regard to elemental speciation is discussed.     

A versatile new torch for inductively coupled plasma spectrometry

A modified torch for optical emission spectrometry with an inductively coupled plasma source is described. The demountable torch incorporates a flared intermediate tube, a capillary injector tube and interchangeable jets at the gas inlets. The optimised performance of the torch is compared with that of a conventional torch. The new torch can be operated over a wide range of gas flows and shows considerable promise in work with an argon-cooled plasma. The ability to operate at high or low gas flow rates, and the possibility of interchanging tubes and jets easily illustrate the versatility of the new design.     

A status report on helium inductively coupled plasma mass spectrometry

The current status of helium inductively coupled plasma – mass spectrometry (He ICPMS) is examined, its potentials and limitations are reviewed, and a summary of fundamental properties of atmospheric pressure He ICP discharges is presented. Also included are results of He ICPMS studies with a new helium plasma torch (18 mm i.d.) operated at four sets of operating conditions. Under the cold plasma condition (600 W forward power), no secondary discharge is observed and ion kinetic energies ranging from 2.0 eV to 9.5 eV for 6 elements (mass range: 39–208) are measured. At higher power levels, the secondary discharge still is strong. In general, detection limits for certain elements are improved by 1–3 orders of magnitude compared to previous data acquired in 1993 with a 13-mm He ICP torch. Elements such as K, Fe, Cr, Mn, Ni, and Co that suffer from spectral interferences in Ar ICPMS can be detected at pg/mL-levels with an analogue detector and a prototype ICPMS instrument having no photon stops or obstacles present in the ion trajectory path.     

Applications of inductively coupled plasma mass spectrometry and laser ablation inductively coupled plasma mass spectrometry in materials science

Inductively coupled plasma mass spectrometry (ICP-MS) and laser ablation ICP-MS (LA-ICP-MS) have been applied as the most important inorganic mass spectrometric techniques having multielemental capability for the characterization of solid samples in materials science. ICP-MS is used for the sensitive determination of trace and ultratrace elements in digested solutions of solid samples or of process chemicals (ultrapure water, acids and organic solutions) for the semiconductor industry with detection limits down to sub-picogram per liter levels. Whereas ICP-MS on solid samples (e.g. high-purity ceramics) sometimes requires time-consuming sample preparation for its application in materials science, and the risk of contamination is a serious drawback, a fast, direct determination of trace elements in solid materials without any sample preparation by LA-ICP-MS is possible. The detection limits for the direct analysis of solid samples by LA-ICP-MS have been determined for many elements down to the nanogram per gram range. A deterioration of detection limits was observed for elements where interferences with polyatomic ions occur. The inherent interference problem can often be solved by applying a double-focusing sector field mass spectrometer at higher mass resolution or by collision-induced reactions of polyatomic ions with a collision gas using an ICP-MS fitted with collision cell. The main problem of LA-ICP-MS is quantification if no suitable standard reference materials with a similar matrix composition are available. The calibration problem in LA-ICP-MS can be solved using on-line solution-based calibration, and different procedures, such as external calibration and standard addition, have been discussed with respect to their application in materials science. The application of isotope dilution in solution-based calibration for trace metal determination in small amounts of noble metals has been developed as a new calibration strategy. This review discusses new analytical developments and possible applications of ICP-MS and LA-ICP-MS for the quantitative determination of trace elements and in surface analysis for materials science.     

A status report on helium inductively coupled plasma mass spectrometry

The current status of helium inductively coupled plasma - mass spectrometry (He ICPMS) is examined, its potentials and limitations are reviewed, and a summary of fundamental properties of atmospheric pressure He ICP discharges is presented. Also included are results of He ICPMS studies with a new helium plasma torch (18 mm i.d.) operated at four sets of operating conditions. Under the "cold plasma" condition (600 W forward power), no secondary discharge is observed and ion kinetic energies ranging from 2.0 eV to 9.5 eV for 6 elements (mass range: 39-208) are measured. At higher power levels, the secondary discharge still is strong. In general, detection limits for certain elements are improved by 1-3 orders of magnitude compared to previous data acquired in 1993 with a 13-mm He ICP torch. Elements such as K, Fe, Cr, Mn, Ni, and Co that suffer from spectral interferences in Ar ICPMS can be detected at pg/mL-levels with an analogue detector and a prototype ICPMS instrument having no photon stops or obstacles present in the ion trajectory path.     

Capillary electrophoresis inductively coupled plasma mass spectrometry

Chemical speciation (extraction of elemental information and identification of molecular environment for an analyte in a complex sample) has been a long sought after goal for analytical chemists. Recently, because of successful developments in more sensitive element-specific detectors and gentle separation schemes, which preserve the true chemical information in a real sample, routine speciation experiments are becoming a common occurrence in the scientific literature. For many reasons, the combination of capillary electrophoresis (for separation of different chemical species) with inductively coupled plasma mass spectrometry (for element and isotope specific detection) has emerged as the method of choice for these analyses. In this article the basic principles of capillary electrophoresis inductively coupled plasma mass spectrometry are discussed. Design consideration for instrument interface, anticipated difficulties with speciation experiments and applications for specific matrices and analytes are also presented in this article.     

Radionuclide detection by inductively coupled plasma mass spectrometry: A comparison of atomic and radiation detection methods

Radionuclide detection by mass spectrometric techniques offers inherent advantages over conventional radiation detection methods. Since radionuclides decay at variable rates (half-lives) and via various nuclear transformations (i.e. emission of alpha-, beta-, and/or gamma-radiation) their determination via radiation detection depends not only on decay systematics but also on detector technology. Radionuclide detection by directatom measurement, however, is dependent only on technique sensitivity and is indifferent to decay mode. Evaluation of inductively coupled plasma mass spectrometry (ICP/MS) indicates this method to be superior to conventional radiation detection techniques for many radionuclides. This work discusses factors which influence detection by both methods. Illustrative applications of ICP/MS to the ultra-trace determination of several radionuclides, including¹²⁹I, are presented.Operated for the U.S. Department of Energy by Battelle Memorial Institute under contract De-AC06-76RLO 1830.     

A new continuous calibration method for inductively coupled plasma spectrometry

A new calibration method was developed and applied to inductively coupled plasma atomic emission spectrometry. External calibration was performed as follows. A container was filled with a given volume of deionized (V _p) water. Then a concentrated standard was introduced at a controlled rate (Q _e) into the tank by means of a peristaltic pump. The resulting solution was stirred throughout the experiment. Simultaneously, the solution inside the tank was pumped from the vessel to the plasma at a given rate (Q _s). The signal was continuously recorded. The variation of the concentration of the solution leaving the tank with time was determined by applying a basic equation of stirred tanks. The representation of the emission intensity versus the time and the further conversion of the time scale into a concentration scale gave rise to the calibration line. The best results in terms of linearity were achieved for V _p=15 cm³, Q _e=0.6–0.75 ml min⁻¹ and Q _s=1–1.2 ml min⁻¹. Graphs with more than 40 standards were obtained within about 10 min. The results found were not statistically different from those afforded by the conventional calibration method. In addition, the new method was faster and supplied better linearity and precision than the conventional one. Another advantage of the stirred tank was that procedures such as dynamic calibration and standard additions could be easily and quickly applied, thus shortening the analysis time. A complete analysis following these procedures based on the measurement of 30 standards took about 5 min. Several synthetic as well as certified samples (i.e., bovine liver, mussel tissue and powdered milk) were analyzed with the stirred tank by applying four different calibration methodologies (i.e., external calibration, internal calibration, standard additions and a combination of internal standardization and standard additions), with the combination of internal standardization and standard additions being the method that provided the best results. The element concentrations obtained were not significantly different from the actual or certified values.     

电感耦合等离子体质谱技术最新进展

对1998年以来电感耦合等离子体质谱技术（ICP－MS）的最新进展作一简要回顾。内容包括同位素比值分析、双聚焦扇形磁场高分辨ICP－MS、多接收器磁扇形等离子体质谱仪（MC－ICP－MS）、飞行时间等离子体质谱仪（ICP－TOF－MS）、“冷”等离子体及屏蔽炬技术以及动态碰撞／反应池技术等进展。     

Double-pulse laser ablation inductively coupled plasma mass spectrometry

This paper describes the use of double-pulse laser ablation to improve ICP-MS internal (temporal relative standard deviation, %TRSD) and external (%RSD) precision. The first laser pulse is used to ablate a large quantity of mass from the sample surface. The second pulse is applied with a variable time delay after the first pulse to break the ablated mass into a finer aerosol, which is more readily transported to and digested in the ICP-MS. A factor of two improvement in %TRSD and factor of five in %RSD are demonstrated.     

Imaging mass spectrometry in biological tissues by laser ablation inductively coupled plasma mass spectrometry

Of all the inorganic mass spectrometric techniques, laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) plays a key role as a powerful and sensitive microanalytical technique enabling multi- element trace analysis and isotope ratio measurements at trace and ultratrace level. LA-ICP-MS was used to produce images of detailed regionally-specific element distribution in 20 microm thin sections of different parts of the human brain. The quantitative determination of copper, zinc, lead and uranium distribution in thin slices of human brain samples was performed using matrix-matched laboratory standards via external calibration procedures. Imaging mass spectrometry provides new information on the spatially inhomogeneous element distribution in thin sections of human tissues, for example, of different brain regions (the insular region) or brain tumor tissues. The detection limits obtained for Cu, Zn, Pb and U were in the ng g(-1) range. Possible strategies of LA-ICP-MS in brain research and life sciences include the elemental imaging of thin slices of brain tissue or applications in proteome analysis by combination with matrix-assisted laser desorption/ionization MS to study phospho- and metal- containing proteins will be discussed.     

Continuum background in inductively coupled plasma mass spectrometry

A laboratory constructed ICP mass spectrometer has been studied to reduce the continuum background to achieve better signal to background ratios. An optical baffle plate of 6 mm diameter is found to be the best with a cone-like lens cap of 8 mm diameter. Varying the operating conditions for the plasma and mass spectrometer affect the background intensity. Increasing the voltages applied to the ion lens elements always increases the background. A weak discharge in the lens elements is considered as the cause of the increase. The variation of background with the voltage applied to the ion deflector placed in front of the detector suggests that charged species partly contribute continuum background. Detection limits for several elements under compromised conditions are reported.     

A rapid method for uranium isotope ratio measurement by inductively coupled plasma mass spectrometry

Uranium isotope ratio U 234/238 can be measured by commercial high-performance inductively coupled plasma mass spectrometry (ICP-MS) with good precision and accuracy (relative standard deviation RSD<2%). The method is based on acquiring the data using a peak jump mode and a collecting signal 10 times longer for low abundance isotopes. Uranium isotope standards U-005 to U-200 from the National Bureau of Standards (NBS) were used for method development. The optimum uranium concentration range for analysis for dissolved samples is from 50 to 200 g l^–1.     

Modification of capillaries coupled to micro-flow nebulizers: a new strategy for on-line interference removal in inductively coupled plasma mass spectrometry

The application of interference removal within modified silica capillaries for the introduction of liquid samples by a micro-flow nebulizer into an inductively coupled plasma quadrupole mass spectrometer is described using the example of (103)Rh and its mass interferences resulting from (63)Cu (ArCu(+)), (87)Rb (RbO(+)), (87)Sr (SrO(+)) and (206)Pb (Pb(2+)). A strong cation exchanger was covalently bound to the capillary surface and its ability to interact with cations in aqueous solution was investigated. At pH 7. 0 the interfering elements can be selectively adsorbed within the capillaries without hampering the elution of Rh. The capillaries are easily regenerated by flushing with 10(-3) M hydrochloric acid in order to exchange retained cations for protons. Calibrations show no significant difference between the absence and presence of interfering elements, so the detection limit for Rh of 6.0 ng l(-1) (3sigma) is not influenced by adding up to a 100-fold excess of interferents. The method developed is compared with a mathematical correction model for inductively coupled plasma mass spectrometry using the example of Rh determination in particulate car exhaust fumes and the results obtained are discussed.