Stability and reactivity of ϵ-χ-θ iron carbide catalyst phases in Fischer-Tropsch synthesis: controlling μ(C)

The stability and reactivity of ?, χ, and θ iron carbide phases in Fischer-Tropsch synthesis (FTS) catalysts as a function of relevant reaction conditions was investigated by a synergistic combination of experimental and theoretical methods. Combined in situ X-ray Absorption Fine Structure Spectroscopy/X-ray Diffraction/Raman Spectroscopy was applied to study Fe-based catalysts during pretreatment and, for the first time, at relevant high pressure Fischer-Tropsch synthesis conditions, while Density Functional Theory calculations formed a fundamental basis for understanding the influence of pretreatment and FTS conditions on the formation of bulk iron carbide phases. By combining theory and experiment, it was found that the formation of θ-Fe(3)C, χ-Fe(5)C(2), and ?-carbides can be explained by their relative thermodynamic stability as imposed by gas phase composition and temperature. Furthermore, it was shown that a significant part of the Fe phases was present as amorphous carbide phases during high pressure FTS, sometimes in an equivalent amount to the crystalline iron carbide fraction. A catalyst containing mainly crystalline χ-Fe(5)C(2) was highly susceptible to oxidation during FTS conditions, while a catalyst containing θ-Fe(3)C and amorphous carbide phases showed a lower activity and selectivity, mainly due to the buildup of carbonaceous deposits on the catalyst surface, suggesting that amorphous phases and the resulting textural properties play an important role in determining final catalyst performance. The findings further uncovered the thermodynamic and kinetic factors inducing the ?-χ-θ carbide transformation as a function of the carbon chemical potential μ(C).     

Temperature-programmed hydrogenation (TPH) and in situ Mössbauer spectroscopy studies of carbonaceous species on silica-supported iron Fischer-Tropsch catalysts

Carbonaceous surface species and bulk iron carbides formed under realistic Fischer-Tropsch synthesis (FTS) conditions on moderately dispersed, active silica-supported iron catalysts (Fe/SiO2, FePt/SiO2, and FePtK/SiO2) were characterized. Bulk iron phase compositions were determined by M?ssbauer spectroscopy and phase transformations of carbonaceous species during pretreatment with CO, H2, or H2/CO and following reaction were characterized using temperature-programmed hydrogenation (TPH). Isothermal transient rates of FTS were also measured for catalysts after different pretreatments. Six surface and bulk carbonaceous species were quantitatively identified from combined TPH and M?ssbauer spectra of the FePtK catalyst. They include, in order of decreasing reactivity, (a) adsorbed, atomic carbon; (b) amorphous, lightly polymerized hydrocarbon or carbon surface species; (c) bulk epsilon' and chi carbides (Fe(2.2)C and Fe(2.5)C); and (d) disordered and moderately ordered graphitic surface carbons. A correlation between the amount of reactive alpha-carbon (C(alpha)) and initial catalytic activity was established. The method of Li et al. for measuring irreversible chemisorption of CO does not appear to provide quantitative measurements of active site densities on silica-supported iron. Models, based on this and previous work, are proposed for iron phase and carbon phase transformations in silica-supported iron during pretreatment, FTS, and postreaction passivation/oxidation.     

Deactivation studies of nano-structured iron catalyst in Fischer-Tropsch synthesis

A nano-structured iron catalyst for syngas conversion to hydrocarbons in Fischer-Tropsch synthesis (FTS) was prepared by micro-emulsion method. Compositions of bulk iron phase and phase transformations of carbonaceous species during catalyst deactivation in FTS reaction were characterized by temperature-programmed surface reaction with hydrogen (TPSR-H2), and XRD techniques. Many carbonaceous species on surface and bulk of the nano-structured iron catalysts were completely identified by combined TPSR-H2 and XRD spectra and which were compared with those recorded on conventional co-precipitated iron catalyst. The results reveal that the catalyst deactivation results from the formation of inactive carbide phases and surface carbonaceous species like graphite, and it will be increased when the particle size of iron oxides was reduced in FTS iron catalyst.     

甲烷干气重整反应中镍基催化剂上表面积碳研究(英文)

镍基催化剂上积碳是甲烷干气重整反应急需解决的关键问题。实验采用ＴＰＳＲ、ＴＰＤ、ＸＰＳ和脉冲反应等方法系统研究了镍基催化剂表面积碳的形态和特点。热力学研究表明,在５７３ Ｋ到１２７３ Ｋ的温度范围内,催化剂的表面积碳是不可避免的。ＴＰＳＲ、ＸＰＳ和ＴＰＤ研究表明,甲烷在催化剂表面裂解将形成至少三种碳物种：Ｃα、Ｃβ和Ｃγ。这三种碳物种具有不同的表面迁移能力、热稳定性和反应活性。其中,Ｃα物种在甲烷干气重整反应中是一种非常活泼和重要的中间体;Ｃγ物种则可能是表面积碳的前驱物：部分脱氢的Ｃβ物种能够与Ｈ２或ＣＯ２反应生成ＣＨ４或ＣＯ。     

TPSR STUDIES OF THE ACTIVATION OF METHANE ON SUPPORTED PLATINUM CATALYSTS

1yttroductionIMcthancactivationisoncofthemostintriguingsubjectsinheterogencouscatal}'sisbccauscmcthancisathcrmod}namicall}'stabIccompoundt`ithanoblcgas-likeconfiguration.0fintcrcstsisthcrcccntt"orkreportcdb}'KocrtsIll,BeIguedl21.andYanl3ltthosucccssfull}'convcrtnaturalgasintohighcrh}.drocarbonsb}'thctt"o-stcproutcinwhichnaturalgasisfirstthcrmall}'activatcdonthctransitionmctalcatal}.stsatmoderatctemperature.Toasccrtainthcnaturcofrcactionsofmcthane.thcactivationofmcthaneisextensivel)'invcstiga…     

Studies on the Adsorption and Dissociation of Methane and Carbon Dioxide on Nickel

The adsorption and dissociation of methane and carbon dioxide for reforming on nickel catalysts were extensively investigated by TPSR, TPD, XPS and pulse reaction methods. These studies showed that the decomposition of methane results in the formation of at least three kinds of surface carbon species on supported nickel catalysts. Carbidic Cα, carbonaceous Cβ and carbidic clusters Cγ surface carbon species formed by the decomposition of methane demonstrated different surface mobility, thermal stability and reactivity. Carbidic Cα is a very active and important intermediate in carbon dioxide reforming with methane, and the carbidic clusters Cγ species might be the precursor of surface carbon deposition. The partially dehydrogenated Cβ species can react with H2 or CO2 to form CH4 or CO. On the other hand, it was proven that CO2 can be weakly adsorbed on supported nickel catalysts, and only one kind of CO2 adsorption state is formed. The interaction mechanism between the species dissociated from CH4 and CO2 during reforming was then hypothesized.     

Redox reaction of p-aminophenol at carbon nanotube electrodes is accelerated by carbonaceous impurities

We show here that the enhanced electrochemical behaviour of carbon nanotubes towards the redox reactions of p-aminophenol does not stem from the innate properties of carbon nanotubes. Investigating the isolated effect of each component present within carbon nanotubes samples, which are the carbon nanotube, the graphitic and amorphous carbonaceous impurities and the metallic impurities, we have elucidated that solely the carbonaceous impurities, both graphitic and amorphous, significantly accelerate the electron transfer reaction of p-aminophenol at carbon nanotube surfaces.     

Interface stoichiometry and structure in anodic niobium pentoxide

High-resolution transmission electron microscopy and electron energy loss spectroscopy (EELS) were performed on electrochemically anodized niobium and niobium oxide. Sintered anodes of Nb and NbO powders were anodized in 0.1 wt% H3PO4 at 10, 20, and 65 V to form surface Nb2O5 layers with an average anodization constant of 3.6 +/- 0.2 nm/V. The anode/dielectric interfaces were continuous and the dielectric layers were amorphous except for occurrences of plate-like, orthorhombic pentoxide crystallites in both anodes formed at 65 V. Using EELS stoichiometry quantification and relative chemical shifts of the Nb M4,5 ionization edge, a suboxide transition layer at the amorphous pentoxide interface on the order of 5 nm was detected in the Nb anodes, whereas no interfacial suboxide layers were detected in the NbO anodes.     

A Flat Model Approach to Tethered Bis(imino)pyridyl Iron Ethylene Polymerization Catalysts

A surface science model for a silica supported bis(imino)pyridyl iron complexes is applied to reveal the surface chemistry of these heterogeneous polymerization catalysts. The polymerization activity of these models and the molecular weight distribution of the resulting polymer are comparable to similar catalysts supported on amorphous silica. The catalyst deactivates partially during the first hour of ethylene polymerization. Based on photoelectron spectroscopy (XPS) we attribute this deactivation to iron extrusion by the aluminium alkyl activator.     

Review of Acetic Acid Synthesis from Various Feedstocks Through Different Catalytic Processes

Acetic acid (AA) has been largely used with a wide range of applications such as a raw material for a synthesis of vinyl acetate monomer, cellulose acetate or acetate anhydrate, acetate ester and a solvent for a synthesis of terephthalic acid and so on. The present paper briefly summarizes the commercialized chemical processes with their Rh or Ir-based catalytic systems in a liquid-phase carbonylation reaction such as Monsanto, Cativa and Acetica processes. In addition, some alternative catalytic systems such as heterogeneous catalysts to produce AA by direct oxidation or indirect carbonylation of dimethyl ether through BP-SaaBre process in a gas-phase reaction to solve some problems such as a difficult separation of homogeneous catalysts in a corrosive reaction medium. Some home-made heterogeneous catalysts such as a rhodium incorporated graphitic carbon nitride (Rh-g-C₃N₄) and some heterogenized homogeneous catalysts using the supports of tungsten carbide, iron oxide or graphitic carbon nitride containing rhodium complexes were also introduced for the synthesis of AA through a liquid-phase methanol carbonylation reaction to effectively solve the leaching problem of active rhodium metal as well as to mitigate the separation problem of homogeneous catalysts.     

高分散费—托合成铁／活性炭催化剂的研究：Ⅴ.锰的助剂作用

使用原位穆斯堡尔谱和微型反应器考察了物相、锰含量和制备方法对Fe-Mn/AC催化剂F-T反应性的影响,并讨论了Fe-Mn/AC催化剂的表面结构及其与F-T反应性的关系。对于Fe-Mn/AC催化剂,将铁还原到金属态时具有很高的活性和对气态烯烃和高碳烃的选择性,锰含量对催化剂的活性和选择性影响不大;影响催化剂选择性的主要是受制备制约的铁-锰在活性炭载体表面的结构形态,对此我们提出了模型,只有当铁-锰处于高分散状态,作为助剂锰才能改善催化剂对气态烯烃和高碳烃的选择性,否则锰反而起不利的作用。     

内包碳化铁洋葱状富勒烯的合成和表征

自从Kr（ae）tschmer等发现宏观量制备富勒烯的方法以来,这种新型的球形碳质材料已经引起材料科学家愈来愈多的关注．特别是以洋葱状形态和包裹外来物质进入洋葱状富勒烯内部的碳质材料更是展现了这种新型碳材料的应用前景．     

F—T合成Fe—Mn超细粒子催化剂的表面结构

本工作利用XPS研究了用于F-T合成的加K助剂的Fe-Mn超细粒子催化剂的表面结构,考察了制备方法和预处理条件对催化剂表面结构的影响。在合成气处理条件下,伴随着Mn向表面迁移并产生富集。催化剂表面显著富K;适当的Mmt和富集有利于提高低碳烯烃选择性,同时活性不会明显降低。催化剂还原可以用“内还原模型”来描述,依还原程度不同。表面形成不同的Fe~3+、Fe~(?)、Fe_3O_4、x-Fe(?)C(?)、Mn~(3+)、Mn~(3+)的混合物,Mn的加入促进了表面铁物种的还原与碳化,合成气氛下,催化剂表面形成了三种不同的表面碳物种:烃类碳、石墨型碳(284.6eV)以及碳化物碳(283.2eV)。     

Graphitic‐Carbon Layers on Oxides: Toward Stable Heterogeneous Catalysts for Biomass Conversion Reactions

Conversion of biomass‐derived molecules involves catalytic reactions under harsh conditions in the liquid phase (e.g., temperatures of 250 °C and possibly under either acidic or basic conditions). Conventional oxide‐supported catalysts undergo pore structure collapse and surface area reduction leading to deactivation under these conditions. Here we demonstrate an approach to deposit graphitic carbon to protect the oxide surface. The heterogeneous catalysts supported on the graphitic carbon/oxide composite exhibit excellent stability (even under acidic conditions) for biomass conversion reactions.     

The micro-distribution of carbonaceous matter in the Murchison meteorite as investigated by Raman imaging

The carbonaceous Murchison chondrite is one of the most studied meteorites. It is considered to be an astrobiology standard for detection of extraterrestrial organic matter. Considerable work has been done to resolve the elemental composition of this meteorite. Raman spectroscopy is a very suitable technique for non-destructive rapid in situ analyses to establish the spatial distribution of carbonaceous matter. This report demonstrates that Raman cartography at a resolution of 1 microm2 can be performed. Two-dimensional distribution of graphitised carbon, amorphous carbonaceous matter and minerals were obtained on 100 microm2 maps. Maps of the surface of native stones and of a powdered sample are compared. Graphitic and amorphous carbonaceous domains are found to be highly overlapping in all tested areas at the surface of the meteorite and in its interior as well. Pyroxene, olivine and iron oxide grains are embedded into this mixed carbonaceous material. The results show that every mineral grain with a size of less than a few microm2 is encased in a thin carbonaceous matrix, which accounts for only 2.5 wt.%. This interstitial matter sticks together isolated mineral crystallites or concretions, including only very few individualized graphitised grains. Grinding separates the mineral particles but most of them retain their carbonaceous coating. This Raman study complements recent findings deduced from other spatial analyses performed by microprobe laser-desorption laser-ionisation mass spectrometry (microL2MS), transmission electron microscopy (TEM) and scanning transmission X-ray microscopy (STXM).     

Iron-based catalysts encapsulated by nitrogen-doped graphitic carbon for selective synthesis of liquid fuels through the Fischer-Tropsch process

Fischer-Tropsch synthesis (FTS) has the potential to be a powerful strategy for producing liquid fuels from syngas if highly selective catalysts can be developed. Herein, a series of iron nanoparticle catalysts encapsulated by nitrogen-doped graphitic carbon were prepared by a one-step pyrolysis of a ferric L-glutamic acid complex. The FeC-800 catalyst pyrolyzed at 800 °C showed excellent catalytic activity (239.4 μmol_CO g_Fe^–1 s^–1), high C₅–C₁₁ selectivity (49%), and good stability in FTS. The high dispersion of ferric species combined with a well-encapsulated structure can effectively inhibit the migration of iron nanoparticles during the reaction process, which is beneficial for high activity and good stability. The nitrogen-doped graphitic carbon shell can act as an electron donor to the iron particles, thus promoting CO activation and expediting the formation of Fe₅C₂, which is the key factor for obtaining high C₅–C₁₁ selectivity.     

Study on the Precursor Phase Composition of Fused Iron Catalyst for Fischer-Tropsch Synthesis

The effect of the precursor composition of fused iron catalyst on the performance of Fischer-Tropsch synthesis was investigated. XRD, BET and CO2 adsorption experiments were carried out to provide better insight into the relationship therein. The results showed that the selectivity of C5＋ hydrocarbon products was dependent on the mole ratio of Fe^2＋/Fe^3＋, which was represented by a hump-shaped curve. Catalysts with precursors containing Fe3O4 phase favored the magnetite spinal formation during F-T reaction, while Fe（1-x）O-based catalysts were more likely to favor the formation and growth of the iron carbide crystals.     

Hollow Spheres of Iron Carbide Nanoparticles Encased in Graphitic Layers as Oxygen Reduction Catalysts

Nonprecious metal catalysts for the oxygen reduction reaction are the ultimate materials and the foremost subject for low‐temperature fuel cells. A novel type of catalysts prepared by high‐pressure pyrolysis is reported. The catalyst is featured by hollow spherical morphologies consisting of uniform iron carbide (Fe₃C) nanoparticles encased by graphitic layers, with little surface nitrogen or metallic functionalities. In acidic media the outer graphitic layers stabilize the carbide nanoparticles without depriving them of their catalytic activity towards the oxygen reduction reaction (ORR). As a result the catalyst is highly active and stable in both acid and alkaline electrolytes. The synthetic approach, the carbide‐based catalyst, the structure of the catalysts, and the proposed mechanism open new avenues for the development of ORR catalysts.     

Separation and detection of the isomeric equine conjugated estrogens, equilin sulfate and delta8,9-dehydroestrone sulfate, by liquid chromatography--electrospray-mass spectrometry using carbon-coated zirconia and porous graphitic carbon stationary phases

Equilin-3-sulfate and delta8,9-dehydroestrone-3-sulfate are two isomers found in equine conjugated estrogens that differ in structure only by the position of a double bond in the steroid B-ring. These geometric isomers were not resolved on a C18 column during the analysis of conjugated estrogen drug products by LC-MS using acetonitrile-ammonium acetate buffer as the mobile phase. While no separations of these two isomers were observed on C18 or other alkyl-bonded silica based phases using a variety of mobile phase conditions, partial separations were achieved on phenyl bonded silica phases with a resolution of 1.5 on a diphenyl phase, and baseline separations were readily achieved on two carbonaceous phases with resolutions routinely exceeding three on graphitic carbon-coated zirconia (Zr-CARB) and resolutions as high as 19 on porous graphitic carbon (Hypercarb). An examination of a selected few conjugated estrogens in the complex drug substance by LC-MS on Hypercarb is presented.     

STUDY ON XPS OF IRON CATALYSTS

IntroduCtioniron-basedcatalystSareactiveinformingliquidfuelsfromthehydrogenationofCO[l~6].However,itiswellknownthatthepoisoningofironcatalystsespeciallythesulfurandoXygenisoneofthemostseriousdeactivationproblemsincommercialproduCtionofsubstitUtenatUralgas…