首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 125 毫秒
1.
The ring-opening metathesis polymerization (ROMP) of norbornene catalyzed by bis(acetonitrile) molybdenum and tungsten complexes, [M(η3-C3H5)Cl(CO)2(NCMe)2] (1-Mo: M = Mo, 1-W: M = W), which have two labile acetonitrile ligands, has been investigated. These complexes catalyzed the ROMP of norbornene as a single-component initiator. The highly cis-selective polymerization proceeded in a THF solution (95% for 1-Mo and 96% for 1-W), whereas polymerization in CH2Cl2 or toluene resulted in lower cis selectivity. The polymerization of terminal acetylenes using these complexes was also examined. The tungsten complex 1-W showed a high catalytic activity for the polymerization of terminal acetylenes, such as phenyl- and tert-butylacetylene. A highly active catalytic system for the ROMP of norbornene was achieved by the activation of the tungsten complex, 1-W, with one equivalent of phenylacetylene, giving poly(norbornene) with a high molecular weight (Mn = 391 × 104) and a high cis selectivity (cis  89%).  相似文献   

2.
Salen-porphyrin-based conjugated microporous polymers(CMPs) have been demonstrated to be an attractive material platform for predesigned structures and promising applications. Herein, a new salen-porphyrin-based conjugated microporous polymer(SP-CMP-L) was solvothermally prepared by porphyrin-forming condensation reaction of pyrrole and salen-dialdehyde derivative. The SP-CMP-L was characterized by spectroscopy technologies, and also exhibited excellent thermal and chemical stability. The porosity of SP-CMP-L was examined by N2 adsorption/desorption isotherms. The BET specific surface area of the CMP material was calculated to be 290.4 m2/g with the pore volume of 0.19 cm3/g. The microstructure property of the resulting material was further evaculated by scanning electron microscopy(SEM) and transmission electron microscopy(TEM). The SP-CMP-L with salen and porphyrin multidentate coordination sites was proposed to serve as an initiator to promote the cross-coupling between aryl halides with unactivated arenes under base-mediated conditions. The transition-metal-free catalytic protocol provided high catalytic activity for direct C-H arylation reaction of unactivated arenes, and thus offered a convenient and efficient alternative for the construction biaryl scaffolds. In addition, the salen-porphyrin-based CMP material possessed remarkable adsorption capability for the removal of organic amines from water.  相似文献   

3.
Janus纳米粒子的结构设计和简易合成是Pickering乳液界面催化的关键. 本文通过在Pickering乳液保护法中操纵共轭亚油酸的自组装、 自交联性和弱还原性, 合成了Janus型自交联吸附胶束修饰的纳米Fe3O4 (SCA-Fe3O4), 并在其表面原位还原金后, 合成了Janus型催化剂Au-SCA-Fe3O4, 考察其同时作为乳化剂和催化剂在乳液界面催化苯甲醇氧化生成苯甲醛的性能. 结果表明, 该Janus纳米粒子的金修饰量(质量分数)仅为0.66%, 兼具乳化性、 催化性和磁响应性. Au-SCA-Fe3O4可制备外观稳定(100 μm)和热稳定(90 ℃)的苯甲醇/水型Pickering乳液, 可显著提高互不相溶反应物与催化剂间的接触面积, 使其催化活性达到均匀纳米催化剂的2倍和非乳液催化时的3倍, 其在界面的不可转动性使苯甲醛的选择性高于99.9%, 避免了苯甲醛被过度氧化成苯甲酸.  相似文献   

4.
A variety of neutral palladium(II) complexes [Pd(L–L)Cl2] containing 1,3-di(2-pyridyl)propane (1), 1,3-bis(2-pyridyl)-2-pentylpropane (2), 1,3-bis(2-pyridyl)-2-phenylpropane (3a), 1,3-bis(2-pyridyl)-2-tolylpropane (4), and 1,3-bis(2-pyridyl)-2-ferrocenylpropane (5) as chelate ligands (L–L) have been synthesized. The crystal structures of 1,3-diphenyl-2,4-di-pyridin-2-yl-butan-1-ol (3b), 5, [(2)PdCl2], [(4)PdCl2], and [(5)PdCl2] have been determined and show a square planar geometry at palladium(II). The neutral complexes were tested in the polymerization of norbornene and copolymerization of norbornene with norbornene derivatives. The complex bearing the pentyl group exhibited high reactivity to give up to 5.9×105 in molecular weight for the homopolymerization. When [(4)PdCl2] or [(5)PdCl2] was used as a catalyst, homopolymers insoluble at 150 °C in trichlorobenzene were obtained. However, copolymerization of norbornene with norbornene derivatives 8a–d catalyzed by [(4)PdCl2] gave soluble copolymers with molecular weights up to 5.1×105.  相似文献   

5.
Herein reported are investigations of norbornene polymerization by novel anilido–imino nickel complexes [(Ar1NCHC6H4NAr2)NiBr]2 (Ar1 = Ar2 = 2,6-dimethylphenyl, 1; Ar1 = 2,6-dimethylphenyl, Ar2 = 2,6-diisopropylphenyl, 2; Ar1 = Ar2 = 2,6-diisopropylphenyl, 3; Ar1 = 2,6-diisopropylphenyl, Ar2 = 2,6-dimethylphenyl, 4) activated with methylaluminoxane (MAO). It was found that at polymerization temperatures below 50 °C, the average molecular weights of the obtained polynorbornenes catalyzed by these four catalytic systems increase with raising temperature, displaying bimodal distribution in GPC curves. The abnormal influence of polymerization temperature could be attributed to the existence of two kinds of catalytic species: heterobimetallic species LNi(II)(μ-Me)2AlMe2 (I) and monometallic species LNi(II)Me (II) (L = anilido–imino ligand) at lower temperature. The former affords a lower molecular weight polymer and the latter higher molecular weight one. With raising polymerization temperature above 50 °C, the species I disappears and only species II exists in polymerization systems, resulting in a normal relation of molecular weight to polymerization temperature. From a kinetic study of the norbornene polymerization catalyzed by 1/MAO catalyst at 70 °C, the polymerization rate (Rp) can be expressed by the formulation: Rp = k[NBE]1.93[Ni]0.88. Moreover, the mechanism of the norbornene polymerization using the anilido–imino nickel complexes activated with MAO is also presented and discussed.  相似文献   

6.
Several different palladium-based catalytic systems have been investigated for the addition of urethane (NH2COOEt) to olefins. A catalytic system based on PdCl2(CH3CN)2/CuCl/O2 gave good results only in the case of the activated olefin methyl acrylate. Catalytic systems of the type Pd(acac)2/phosphorus ligand/acid. previously used to catalyse the telomerisation of conjugated olefins with amines, gave the desired adduct. together with the product of addition of one molecule of urethane and two molecules of diolefin, in the case of isoprene and 2.3-dimethylbutadiene. The main by-products were the dimers of the diolefin, whereas the selectivity in urethane appears to be high. In no case could the addition of urethane to an unactivated non-conjugated olefin be achieved.  相似文献   

7.
The interaction of the conjugated system between functionalized polydiacetylene-glycolipid vesicles and Escherichia coli was investigated under the bactericidal effect of TiO2 colloid. With various pre-incubation and irradiation time, controllable bacteria quantity in the presence of TiO2 colloid was obtained in real time. UV–visible and Raman spectra were utilized to monitor and evaluate the structural transition of bacteria-polydiacetylene-glycolipid vesicles conjugated system under the different conditions, which supplied the detailed information of the transform of the polydiacetylene backbone in real time. Thus controllable conjugated bio-interaction between two bio-interfaces was obtained through the introduction of the third factor and monitored in real time. This would be great aid in fundamental understanding more complex interfaces in the biological environment and would be applicable to the biomedical and biophysical fields.  相似文献   

8.
采用自制的新型双苯并环己酮芳亚胺镍催化剂双苯并环己酮-2,6-二甲基苯亚胺镍(Ⅱ)(Ni{C10H8(O)C[2,6-C6H3(CH3)2N]CH3}2, C1)和双苯并环己酮-2,6-二氯苯亚胺镍(Ⅱ)(Ni{C10H8(O)C[2,6-C6H3Cl2N]CH3}2, C2)与三五氟苯硼[B(C6F5)3]结合, 在一定的反应条件下可高效催化降冰片烯(NB)与甲基丙烯酸正丁酯(n-BMA)的乙烯基加成共聚合. 提出了催化聚合时存在的可能失活机理; 研究了不同单体投料比对催化活性、 产率及产物性能的影响. 根据Kelen-Tüdõs方法分别估算出2种单体在不同催化体系下的竞聚率, 即当催化体系为C1/B(C6F5)3时, 竞聚率rn-BMA=0.02, rNB=16.28, rNB·rn-BMA=0.32; 当催化体系为C2/B(C6F5)3时, rn-BMA=0.01, rNB=64.83, rNB·rn-BMA=0.65. 结果表明, 2种单体在2种体系催化下均为无规共聚合.  相似文献   

9.
The catalytic system in situ generated by combination of [RuCl2(p-cymene)]2 as a ruthenium source, 1,3-bis(mesityl)imidazolinium chloride (MesH2ImCl) as a bulky electron-releasing carbene precursor and cesium carbonate as a base, is shown to be an efficient catalyst for the metathesis reaction of propargylic allylsilyl ethers R1---CCCR2---O---SiMe2---CH2CH=CH2. The metathesis products, the cyclic siloxanes, were obtained after complete conversion of the enynes in 67–87% isolated yields. These six-membered ring compounds contain the 1,3-diene unit that is used in Diels–Alder reaction and give access to heterobicyclic derivatives. The resulting cyclic siloxanes are selectively opened under oxidative conditions with H2O2 to afford allylic diols, with fluoride to form conjugated triene and under hydrogenation conditions with Pd/C catalyst to give a tetrasubstituted alkene.  相似文献   

10.
Conjugated porous polymers exhibit considerable advantage as attractive candidate for carbon dioxide(CO2) capture. However, the regeneration of the CO2 still faces the problem of high energy cost. Here we synthesize a near-infrared region(NIR) light responsive conjugated porous polymer(PDPP-Gu) {DPP=3,6-di(thiophen-2-yl)pyrrolo[3,4-c]pyrrole-1,4(2H,5H)-dione} by constructing porous amorphous networks with a side chain engineering strategy to regulate CO2 adsorption and release through photothermal conversion. The PDPP-Gu is featured by a torsional conjugated backbone as well as a functional side chain of guanidino group. The donor-acceptor configuration of PDPP-Gu afforded strong absorption in the NIR and an excellent photothermal conversion capability of up to 48.8%, as well as a high surface energy. Moreover, guanidine modified side chain further enhanced the CO2-polymers interactions, resulting in a high CO2 selective adsorption capacity(0.8 mmol/g) at 273 K, 1 bar(1 bar=105 Pa). The adsorbed CO2 can be released under NIR light irradiation. This strategy of molecule design combined the dual features of photothermal conversion and gas adsorption, which is beneficial for the development of materials to dynamically control the adsorption and release of CO2 through NIR light.  相似文献   

11.
筛选高效、高选择性多相催化剂异构化亚油酸是共轭亚油酸(CLA)研究的重点。 本文采用溶剂挥发自组装改进的溶胶-凝胶法,合成有序介孔Ru掺杂的MgO-ZrO2固体碱催化剂。 考察了催化剂中不同Mg物质的量对催化剂孔径、比表面积和表面碱性以及Ru等的结构和性能对催化性能的影响。 对比了催化剂的形貌、表面碱性及Ru组分对催化性能的影响程度。 结果表明,n(Zr)∶n(Mg)=3∶1时,Ru掺杂的MgO-ZrO2固体碱催化剂具有高度有序的介孔结构和高的比表面积。 而n(Zr)∶n(Mg)=1∶1时, MgO-ZrO2固体碱催化剂合成CLA产率较高,反应时间4 h,产率达到85%,催化效率为0.099 g(CLA)·L-1(solvent)·min-1,并且催化产物主要为具有生物活性的3种共轭亚油酸异构体。 催化剂的强碱性位点和晶格Ru是催化异构化反应的两个活性位点,强碱性位点是提高催化性能的关键。 固体碱复合氧化物催化效率高、制备方法简单、反应产物生物活性高等优点,具有较好的应用前景。  相似文献   

12.
A photocatalyst of nanometer TiO2/conjugated polymer complex was successfully synthesized and characterized by spectroscopic methods and photocatalytic experiments. The complex photocatalyst could be activated by absorbing both ultraviolet and visible light (λ = 190-800 nm). Methylene blue (MB) could be degraded more efficiently on the complex photocatalyst than on the TiO2 under natural light. The conjugated polymer played a promoting role in the photocatalytic degradation of MB. The calcination temperature had an important effect in degradation of dye and could be summarized as 260℃ 〉 300 ℃ 〉 340 ℃ 〉 220 ℃ 〉 180 ℃.  相似文献   

13.
Norbornadiene undergoes [2 + 2] reaction in THF in the presence of NiX2 and zinc metal powder to give an exo-trans-exo dimer and an exo-trans-exo-trans-exo trimer. In these products, the norbornadiene molecules are linked to each other by forming cyclobutane rings with all cyclobutane carbons occupying exo positions relative to the bridging carbons on the two norbornadiene fragments. Polymerization of norbornadiene occurs if the catalyst NiX2 is replaced by Ni(PPh3)2Cl2. 1,4-Dihydro-1,4-epoxynaphthalene, 5,8-dimethoxy-1,4-dihydro-1,4-epoxynaphthalene, 5-methoxy-1,4-dihydro-1,4-epoxynaphathalene and methyl 1,4-dihydro-1,4-iminonaphthalene-9-carboxylate also dimerize to give exo-trans-exo products in excellent yields in toluene in the presence of Ni(PPh3)2Cl2 and Zn powder. For the dimerization products of 5-methoxy-1,4-dihydro-1–4-epoxynaphthalene, cis and trans isomers with respect to the orientation of methoxy groups in about 1 : 1 ratio were oberved. Under similar reaction conditions for the dimerization of norbornadiene, norbornene undergoes reductive dimerization to afford a product which consists of two norbornyl groups. The structure of this product is also exo-trans-exo.  相似文献   

14.
C02-controlled assembly of conjugated polymer and boron nitride(BN)was fabricated via electrostatic and hydrophobic interactions between the BN fiber and conjugated polymer of PFBT containing fluorene units and 2,1,3-benzothiadiazole units.C02,an effective and green stimulus for regulating the assembly of PFBT and BN fibers,leads to an obvious fluorescence variation.Moreover,PFBT enables the assembly with the signal amplification and light-harvesting properties.This work provides a new triggering method to construct intelligent conjugated polymer-based platform,and offers fluorescence monitoring strategy for carbon dioxide capture.  相似文献   

15.
选择性加氢在功能材料合成和化学产品提纯等化工领域中有非常重要的应用,并且近年来为减少温室效应的影响,将CO_(2)催化选择性加氢转化成其他有应用价值的物质成为研究热点之一。其中热催化是应用较为广泛、易得到多种目标产物并且获得产品收率较高的方法。目前,利用CO_(2)多相热催化加氢制得甲烷、甲醇、轻烯烃等多种高价值的燃料和化学品已取得了一定进展,但仍存在一些难点问题,其中制备高效催化剂是催化加氢反应的关键问题之一。一直以来,研究人员致力于解决催化剂的活性和选择性问题,通过助剂掺杂和加入功能性载体对催化剂进行改性。针对这些问题,本文简要介绍了CO_(2)催化加氢的研究背景,总结了近5年来热催化CO_(2)加氢制得甲烷、甲醇、轻烯烃产品过程中使用催化剂的种类及对加氢反应的影响,期望为CO_(2)多相催化加氢中新型催化剂的开发提供参考。  相似文献   

16.
工业规模的化石能源消耗导致大气中二氧化碳含量不断增加,CO2转化利用成为人们日益关注的热点问题. 金属铜因其成本低廉、储量丰富,并且具有独特的CO2亲和力能够生成多碳化合物,是目前CO2电还原中研究最为广泛深入的电极材料. 由于阴、阳离子的特征吸附对Cu电极性能有显著影响,并且不同反应体系中对Cu电极上CO2吸附、活化影响也有所不同,因此导致金属Cu电极上报道的电催化活性、产物种类与选择性等都非常宽泛. 基于此,有必要系统地研究各种反应条件对金属Cu电极电催化CO2还原性能的影响. 作者选择了平均粒径为600 nm的商品化金属Cu颗粒作为电还原CO2的催化剂,研究了不同反应条件包括各种常用电解质溶液、KHCO3的浓度以及H型电解池和流动池. 实验结果表明,浓度为0.5 mol·L -1的KHCO3作为电解质溶液具有较好催化活性和较高的产物分电流密度,流动池可以进一步提高主要产物甲酸盐和CO的分电流密度. 本研究工作从反应条件的角度对CO2还原的电催化转化进行了系统研究,有助于理解电解液和反应器等因素对CO2电还原反应过程的影响规律.  相似文献   

17.
利用ASE 350型超声快速溶剂抽提仪,在高温高压下对神华长焰煤(SH)进行二硫化碳/N-甲基吡咯烷酮(CS2/NMP)混合溶剂抽提,抽提率约为25%(质量分数)。将得到的抽提残渣(SHC)进行钌离子催化氧化(RICO)降解反应,并对产物进行了离子色谱(IC)检测和以四甲基氢氧化铵(TMAH,25%甲醇溶液)为衍生化试剂的热辅助-在线甲酯化后的气质联用仪(GC-MS)检测分析。结果表明,神华长焰煤大分子结构中含有C2~28烷基侧链,C2~22的连接芳环的烷基桥链,有相对较多的醚键链接的芳环结构存在,芳环缩合程度相对较低(主要以含有2~4个苯环的共轭结构为主),有较多的醚键链接的芳环结构及羟基(-OH)、羰基(=C=O)和甲氧基(-OCH3)等形式含氧基团以及含硫和氮等杂原子化合物的存在。  相似文献   

18.
Both of carbon dioxide(CO2)and near-infrared(NIR)light as triggers for non-invasive remotely control are attracting wide attentions due to their good biocompatibility and easy operation.Here,CO2/NIR light dual controlled nanoparticles are proposed to remotely regulate the unzipping of dsDNA by using imidazole functionalized conjugated polymer nanoparticles(imidazole-CPNs).The dsDNA successfully coats on the shell of imidazole-CPNs to form imidazole-CPNs/dsDNA assembly due to intensively electrostatic interaction triggered by CO2.Furthermore,the unzipping process of dsDNA is remotely controlled by NIR light based on the photothermal effect,and it can be readily monitored by the fluorescence intensity of ethidium bromide(EB)and CD spectra of dsDNA.Thus,dual stimulation responsive imidazole-CPNs effectively control dsDNA unzipping under CO2 stimulus and NIR light,promising a new direction in the biological applications of DNA,such as the treatments of diseases caused by gene duplication abnormality.  相似文献   

19.
钮东方  俞程凯  张新胜 《电化学》2013,19(5):477-481
在H型阳离子交换膜电解槽中,以H2SO4电解质、阳极和阴极铅电极,研究苯酚电解氧化合成对苯醌. 讨论电流密度、电解质浓度、电解液中对苯醌浓度和萃取剂等电解条件对对苯醌收率和电流效率的影响. 经优选工艺条件为:电流密度4 A·dm-2,H2SO4电解质浓度1 mol·L-1,氯仿萃取剂. 通入3.2 Ah电量,对苯醌收率可达68%,电流效率为24.7%. 而在萃取剂存在下,对苯醌收率可提高至73%,电流效率为26%. 实验结果表明氯仿萃取剂可循环套用.  相似文献   

20.
采用现场红外光谱电化学技术, 研究了2,6-二氯苯醌(DCBQ)和2,6-二甲氧基苯醌(DMOBQ)在乙腈溶液中对CO2的电化学捕获过程. 结果表明, 2种醌类衍生物在乙腈溶液中的电化学循环伏安(CV)曲线呈现2对氧化还原峰, 遵循连续两步单电子过程. 加入CO2后, 由于取代基亲电性的不同, 2种衍生物发生了不同的变化: DCBQ仍然呈现2对氧化还原峰, 但是第二对还原峰发生了正移动; 而DMOBQ的2对氧化还原峰变成1对峰. 根据现场红外光谱分析结果分别得到了DCBQ和DMOBQ电化学捕获CO2过程的不同机理. DCBQ是二价阴离子发生化学变化的电化学-电化学-化学(EEC)机理, 而DMOBQ则是还原产物一价阴离子自由基参与化学变化的电化学-化学-电化学(ECE)机理. 进一步对CO2捕获过程进行了定量分析, 得出2种反应的化学计量比均为1∶1.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号